Jump to content

Robert LabTeam

Members
  • Posts

    26
  • Joined

  • Last visited

Everything posted by Robert LabTeam

  1. I have noticed a very weird problem: connection works for some time (several hours or sometimes days) and then stops. Once it stopped working (connection between my mobile app and OrangePi) I have checked on the board: - ping 8.8.8.8 - OK - ping (router IP) - OK - ping (broadcast ) - FAILED - ping (PC or any other device connected to the network) - FAILED In all cases, Wireshark captures the ping requests. Once I tried to ping OrangePi board from my PC, I see in&out ping packet on OPI board by Wireshark. It seems like some lower layer or router (the same on two different) blocks the outgoing connection. Ideas? (WiFi power management off, no firewall) What helps: - turn on/off wifi adapter. What I have noticed - route -n shows one additional entry: 192.168.31.0 0.0.0.0 255.255.255.0 U ... when the outgoing connection works. So it seems that somehow my IP routing table changed How? Diagnosis information is here(armbianmonitor returns that it cannot be uploaded due to network issues, but it worked): http://ix.io/1DEO (Network/firewall problem detected. Not able to upload debug info.)
  2. And the same command on Samsung memory (eMMC was detected): [ 0.000000] Kernel command line: root=UUID=8591b60d-2481-4c21-806f-a9146bdb782f rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=cd93fc55-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cma=96M cgroup_enable=memory swapaccount=1 [ 1.223368] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.111 2015-4-13 15:24) Compiled in Nov 22 2017 at 13:44:04 [ 1.223406] [mmc]: get mmc0's sdc_power is null! [ 1.223436] [mmc]: get mmc1's sdc_power is null! [ 1.223445] [mmc]: get mmc1's 2xmode ok, val = 1 [ 1.223454] [mmc]: get mmc1's ddrmode ok, val = 1 [ 1.223484] [mmc]: get mmc2's sdc_power is null! [ 1.223493] [mmc]: get mmc2's 2xmode ok, val = 1 [ 1.223502] [mmc]: get mmc2's ddrmode ok, val = 1 [ 1.223516] [mmc]: MMC host used card: 0x7, boot card: 0x0, io_card 2 [ 1.227308] [mmc]: sdc0 power_supply is null [ 1.339175] mmc0: new high speed SDHC card at address aaaa [ 1.339742] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 1.342545] mmcblk0: p1 [ 1.343211] mmcblk mmc0:aaaa: Card claimed for testing. [ 1.343227] mmc0:aaaa: SC16G 14.8 GiB [ 1.344811] [mmc]: sdc2 power_supply is null [ 1.464544] mmc2: new high speed DDR MMC card at address 0001 [ 1.465129] mmcblk1: mmc2:0001 8WPD3R 7.28 GiB [ 1.465380] mmcblk1boot0: mmc2:0001 8WPD3R partition 1 4.00 MiB [ 1.465617] mmcblk1boot1: mmc2:0001 8WPD3R partition 2 4.00 MiB [ 1.466642] mmcblk1: p1 [ 1.469477] mmcblk1boot1: unknown partition table [ 1.471042] mmcblk1boot0: unknown partition table [ 1.471271] mmcblk mmc2:0001: Card claimed for testing. [ 1.471284] mmc2:0001: 8WPD3R 7.28 GiB [ 1.472856] [mmc]: sdc1 power_supply is null [ 1.528224] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.529882] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.531514] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.534440] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.631553] mmc1: new high speed SDIO card at address 0001 [ 8.337376] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 11.001099] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 11.070301] dummy_sdmmc: probe of mmc1:0001:1 failed with error -123 [ 11.070349] dummy_sdmmc: probe of mmc1:0001:2 failed with error -123 [ 11.070557] mmc1: card 0001 removed [ 11.070816] [mmc]: sdc1 power_supply is null [ 11.074947] [mmc]: sdc1 power_supply is null [ 11.127956] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 11.129516] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 11.131107] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 11.133882] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 11.224041] mmc1: new high speed SDIO card at address 0001 [ 11.240329] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 11.240449] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  3. [ 0.000000] Kernel command line: root=UUID=8591b60d-2481-4c21-806f-a9146bdb782f rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=cd93fc55-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cma=96M cgroup_enable=memory swapaccount=1 [ 1.213356] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.111 2015-4-13 15:24) Compiled in Nov 22 2017 at 13:44:04 [ 1.213395] [mmc]: get mmc0's sdc_power is null! [ 1.213424] [mmc]: get mmc1's sdc_power is null! [ 1.213434] [mmc]: get mmc1's 2xmode ok, val = 1 [ 1.213443] [mmc]: get mmc1's ddrmode ok, val = 1 [ 1.213473] [mmc]: get mmc2's sdc_power is null! [ 1.213483] [mmc]: get mmc2's 2xmode ok, val = 1 [ 1.213492] [mmc]: get mmc2's ddrmode ok, val = 1 [ 1.213505] [mmc]: MMC host used card: 0x7, boot card: 0x0, io_card 2 [ 1.217283] [mmc]: sdc0 power_supply is null [ 1.329173] mmc0: new high speed SDHC card at address aaaa [ 1.329733] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 1.332534] mmcblk0: p1 [ 1.333183] mmcblk mmc0:aaaa: Card claimed for testing. [ 1.333199] mmc0:aaaa: SC16G 14.8 GiB [ 1.334782] [mmc]: sdc2 power_supply is null [ 1.472884] mmc2: unrecognised EXT_CSD revision 8 [ 1.472905] mmc2: error -22 whilst initialising MMC card [ 1.473035] [mmc]: sdc2 power_supply is null [ 1.477145] [mmc]: sdc2 power_supply is null [ 1.567456] mmc2: unrecognised EXT_CSD revision 8 [ 1.567488] mmc2: error -22 whilst initialising MMC card [ 1.567643] [mmc]: sdc2 power_supply is null [ 1.571824] [mmc]: sdc2 power_supply is null [ 1.675883] mmc2: unrecognised EXT_CSD revision 8 [ 1.675919] mmc2: error -22 whilst initialising MMC card [ 1.676074] [mmc]: sdc2 power_supply is null [ 1.680111] [mmc]: sdc2 power_supply is null [ 1.804071] mmc2: unrecognised EXT_CSD revision 8 [ 1.804109] mmc2: error -22 whilst initialising MMC card [ 1.804260] [mmc]: sdc2 power_supply is null [ 1.808537] [mmc]: sdc1 power_supply is null [ 1.858522] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.860256] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.862010] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.865025] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.868606] mmc1: queuing unknown CIS tuple 0x81 (9 bytes) [ 1.965277] mmc1: new high speed SDIO card at address 0001 [ 8.127876] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 10.695377] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 10.850354] dummy_sdmmc: probe of mmc1:0001:1 failed with error -123 [ 10.850409] dummy_sdmmc: probe of mmc1:0001:2 failed with error -123 [ 10.850649] mmc1: card 0001 removed [ 10.850954] [mmc]: sdc1 power_supply is null [ 10.855213] [mmc]: sdc1 power_supply is null [ 10.907235] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 10.908787] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 10.910345] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 10.913116] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 10.916502] mmc1: queuing unknown CIS tuple 0x81 (9 bytes) [ 11.002973] mmc1: new high speed SDIO card at address 0001 [ 11.019839] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 11.019933] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter Here you go.
  4. I am sure - I have 100 pcs of this boards. Sold already 1000 with KLM8G1GETF - no issues. The latest batch has different memory chip and I do not see this memory in fdisk -l. The old boards indicate eMMC memory.
  5. Issue found! Orange PI changed eMMC from KLM8G1GETF to KLM8G1WEPD. The difference is eMMC 5.0 vs 5.1 and maybe more. The key things is that Armbian (checked using 5.35 and the latest one) does not see this memory (fdisk -l)!! I have noticed it on OPI0 Plus 2 H3. PCB boards are the same, only memory model no. difference. Someone solved it or noticed the same? Confused 🤨
  6. Hi guys, I am using bluetooth (AP6212) and it works pretty well. After several hour of open connection I lost signal and need to reconnect. But I can't. Bluetoothctl returns "No default controller available", however one minute before it worked I tried to restart bluetooth service, rfkill (soft and hardware does not lock anything) , but the problem still exist. Only reboot can back the module to work. Is there any other way to restart the module without reboot?
  7. You are right. However is still shares the same integrated circuit, so WiFi can interrupt BT. I disabled almost all network services. I am wondering if there is a way to set TX output from this module? Maybe it is not set to max. I noticed that if I reduce router output power, it drops connection more often. Maybe, the wifi module attempts to reconnect or repeat some packets and it takes too much time for the module. The problems is also that simple restart bt (on/off) does not help if I got "Invalid command" error while trying to pair the device. I need to reboot. Is there any way to do it without reboot?
  8. Hi, I use OPI0+. Bluetooth works well when using WiFi as a client. In access point I got an error like"Invalid command" "ConnectionAttemptFailed". Is there any way to fix it?
  9. Hi, I am using Bluetooth and WiFi in the same time. Bluetooth is using for a whole time and WiFi 1 time per minute. So, I don't need WiFi connection very fast and do need most of network services. Due usage of AP6210 module, WiFi and BT shares the same communication channel (UART). I continuously send data (1Mbps) via Bluetooth. WiFi is used by my app 1 time per minute.The problem is that Bluetooth drops communication for about second. Reducing BT speed does not help. I noticed that when I download file from OPI board,that drops occurs much often. It seems that WiFi has a higher priority than BT in communication. Strange thing is that when I don't use WiFi network, it still drops randomly. I think some services in background use network. Is there any way to set WiFI connection less important than Bluetooth communication or you have different ideas?
  10. Hi! I am trying to set sudo chmod 777 /sys/class/leds/red_led/brightness It works, but after restart the system reverts my changes. I think there is some init file that changes it. Any tip?
  11. I would love to use something faster...the current script shows 75 minutes, but it took about 35 min. I use SanDisk SDHC 10 class A1. I am looking forward enhanced script.
  12. Thanks, I will try it soon. I am wondering if it is some fault that nand-sata-install takes 75 minutes to transfer 4744MB...maybe is there a way to speed up rsync or replace to different command? Any ideas?
  13. Hi I am trying to prepare SD card that I will be able to copy the same image to several boards: - I have my final OS on EMMC of "mother" board(installed with nand-sata-install), - copy os to SD card using dd if=...of=.., so I got .img file How to clone emmc content to another boards? I know I can use nand-sata -install (preprare my final OS on SD card and the copy to all boards), but it is not quick way. Raw copy is much faster. Any ideas? Of course dd if=my.img of=/emmc does not work - some problem with boot.
  14. Hi @lex, To reach 60 FPS, or more, just changa VTS/HTS value. I created some tool (I launch it in DevC++) that shows what is the end FPS and some other parameters. Just play with the registers: #define MCLK (20*1000*1000) --> usually 24 MHz is used #define MCLK_DIV 1 #define REG_3034 0x18 #define REG_3037 0x4 #define REG_3036 (4*20) #define REG_3035 0x11 #define REG_3108 0x01 And VTS /HTS values here: hts_high = 0x07; // 0x380c hts_low =0xf4; // 0x380d vts_high = 0x07; //0x380e, vts_low = 0xac; //0x380f I have also noticed that almost all drivers are not appropriate for OV5640 (it seems they wrtitten based on OV5642 software application note - for example max lines is different for both sensors: 1964/1968). I found this doc for OV5640 and fixed some things. You can also find there 90 FPS for VGA configuration: https://wenku.baidu.com/view/6b48a191f90f76c661371afa.html main.cpp
  15. Hi guys, I am trying to make autostart of my app, but the app is launched by bash script that automatically launch the app again when crashed: (it finds the latest application version and then launch...then it is waiting for crash , rerun and wait again) - when I placed this script in /etc/profile.d, my system got stuck on my application view without loading desktop (and other needed services). #!/bin/bash sleep 30 while true do str=`ls /home/lufa/Shared/QT/xxxx* | sort -n -t _ -k 2 | tail -n1` if [ ! `pgrep $str` ] ; then $str fi sleep 30 done Thus, I added autostart.sh.desktop file in ~/.config/autostart/ like this: [Desktop Entry] Type=Application Name=Autostart Exec="/home/lufa/Shared/autostart.sh" Hidden=false NoDisplay=false X-GNOME-Autostart-enabled=true Unfortunately my app was not automatically launched Any ideas? I assume that the progblem is GUI app. I got from crontab log - "QXcbConnection: Could not connect to display" - despiting I put "sleep 30" in my bash screipt to wait for ready Desktop.
  16. Hi Guys, I put this script in profile.d and my machine can't launch to the desktop. #!/bin/bash while true do str=`ls /home/lufa/Shared/QT/myapp* | sort -n -t _ -k 2 | tail -n1` if [ ! `pgrep $str` ] ; then $str fi sleep 30 done It seems that this file prevent to run desktop. I can't connect to my board by UART terminal and WiFi What is your suggestion? I am thinking to explore SD card, then change in this script true->false and then it should work. However, what tools can I use to explore the SD card which contains OS image? And is it a fully safe way? Or maybe I should mount this SD card on some other linux device and I will able to edit it?? I managed to fix it - just mount this SD card on some linux machine and edit...so it is easy but I am not pro user
  17. Hi Guys, is there any way to install our custom build automatically ? I mean to insert SD card, connect power adapter , wait 4 minutes, remove card, restart power and use eMMC image?
  18. Hi, I need to name my device by unique ID. Is there any way to get unique number of MCU or other peripheral?
  19. Hi Guys, I have noticed that camera connected to OPI, has several frames lag. I capture image with very high speed (50 fps, camera also gives about 50 fps). Min for V4l2 is 4 buffers, so it gives about 80ms of latency. I cant find a way how to decrease this buffer count to 0 to receive the latest frame. I assume that I need to change some line in kernel and compile it. However, I cant find where exaclty.
  20. Thanks. I got to format the emmc first and then put your code. Works excellent.
  21. Hi Guys, My current system has 128MB of SWAP area for RAM. I think it's located on SD card by default, however I have eMMC (8GB) on board. Is there any way to extend SWAP area to use this 8GB or less of eMMC which can be faster than SD card. Is there any way to extend SWAP area even on SD card on working system?
  22. Public available datasheet is enough to set higher fps/get better quality. I meant 640x480 not FHD resolution when I wrote about STM32. Now, I got it working on 60FPS/VGA (I can increase it but it is not needed now) with good quality results. In free time I will try to get the highest FPS on FHD. Firstly, I want to make my own camera board to reduce noises etc. I had to modify the driver, because controles did not work at all. I think it is VFE/V4l2 issue, so I used QUERY_... to control brightness, exposure time and so on.
  23. Hi, I want to apply some changes to default camera driver (ov5640) to get 60-90FPS, so I just need to change same initialization values in .c file. Now, I compile a whole armbian after patching the .c file to get driver (.ko file). Is there quicker way to obtain the driver without compiling a whole armbian (just get .ko file)?
  24. Hi guys, I have just completed to build my "development workspace" including OpenCV, Qt5 and working OV5640. I've noticed that people reach about 30 fps of the frame rate using VGA/QVGA resolution. Datasheet says about 120 FPS for QVGA and 90FPS for VGA. I was working with this camera chip on STM32Fx and I got much better results than OPI0+ Is it weird, it is? I am wondering what is a limitation to get better performance and quality on this camera. I plan to write drivers myself, however I want to be sure it is only driver limitation. Any advice will be appreciated.
  25. Robert LabTeam

    Robert LabTeam

×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines