data
-
Posts
94 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by data
-
-
Ok, at least I tried
-
Dear Igor,
thank you for your reply. Is there any other H6 based OrangePi with a working audio-codec?
-
Can someone please add support for the onboard microphone to armbian for the Lite2?!
It is missing in armbian-config, there is no h6-analog-codec.dtbo in /boot/dtb/allwinner/overlay
The microphone is wired up the same way as on the other h6 boards.
Thank you very much!
-
Any updates on this issue? I am getting also only USB 2 speed with the current nightly on the lite2.
-
Great, works on nightly
Linux orangepilite2 5.3.0-sunxi64 #5.97.190919 SMP Thu Sep 19 02:51:56 CEST 2019 aarch64 GNU/Linux
from 4 days ago as well. I just missed the patchram command last time I tried.
By the way, I am user data who wrote the post on April 27th
And I am happy to see that my initial efforts finally led to success!
So ladies and gentlemen, attached you'll find an archive with a working init-script for the ap6255 bluetooth chip.
Move the included files to the according directories and modify the MAC-Address in /etc/default/ap6255 to your needs
activate bluetooth with
# service ap6255-bluetooth start
check status:
# service ap6255-bluetooth status
enable on boot:
# systemctl enable ap6255-bluetooth
Include this in the upcoming snapshots please!
And thanks to everybody who made this possible!
-
Good job. Have you tried if it is actually working? I don't get any results from hcitool scan
And there is an error in dmesg when the device is initialized as described by you above:
[ 3068.025249] Bluetooth: hci1: command 0x1003 tx timeout
But I have the feeling we are almost there, at least for the OPi Lite2
When I try specific parameters for hciattach, I get the following:
root@orangepilite2:~# hciattach /dev/ttyS1 bcm43xx 921600 noflow -
bcm43xx_init
Patch not found, continue anyway
Set Controller UART speed to 921600 bit/s
Device setup complete
root@orangepilite2:~# hciconfig hci1 up
Can't init device hci1: Connection timed out (110) -
@dziobak
Thank you very much for your reply. Prior to running the script, I changed to regulator.4 as suggested in your post above.
Once I've tried different voltages I'll let you know the results.
-
Since I had no better idea, I tried stabilitytester as suggested:
The lite2 freezes always when stabilitytester reaches this:
TEST Freq: 816 MHz Soc temp: 40.92 ℃ CPU Freq: 816 MHz CPU Core: 960 mV
TEST Freq: 888 MHz Soc temp: 40.59 ℃ CPU Freq: 888 MHz CPU Core: 960 mV
TEST Freq: 1080 MHz Soc temp: 42.13 ℃ CPU Freq: 1080 MHz CPU Core: 960 mV
TEST Freq: 1320 MHz Soc temp: 52.48 ℃ CPU Freq: 1320 MHz CPU Core: 960 mVI added additional cooling and now, it reboots instead of freeze
So is this a voltage related issue?
-
There was no load on the Lite2. I just keep it on to see how stable it is.
-
On the Lite2, I am experiencing a complete freeze every few (1-3) days. This is happening since the past two or three weeks
The system stops responding and I have to power off and on again. There is nothing in any of the logs. It's as if one would
pull the plug.
Can this be related to the modified voltages?
-
Ok, Lite2 boots fine now with the current updates.
From what I see, uart1 is now enabled by default and listed as ttyS1 in dmesg.
Any idea, why I still can not enable bluetooth via hciattach /dev/ttyS1 ... ?
How can I test if uart1 is actually working?
-
Have the changes been updated also in the Lite2 version?
-
In order to make bluetooth work, you need to check if uart1 is declared properly in the dts/dtb and enabled. Then proceed with hcitool...
-
So, does this mean the current nightly for the Lite2 may most likely work if I use a 'legacy' dtb?
-
@dolphs
Which image have you used?
-
Probably you have to wait a little bit longer. The latest nightly is still from the 7th/8th at this moment...
-
@Igor Thank you very much for your efforts!
Will this be incorporated in the Lite2 image as well from tormorrow?
-
Orange Pi Lite2 affected as well: After upgrading to the latest nightly (Jun-01), it does not boot anymore :(
-
Great, thank you! Once I've tried it, I'll report back here.
-
Lite2 has an AP6255 connected to UART1
-
Do you know if these patches are included in the current lite2 built?
-
@megi
I noticed I already had the firmware for ap6255 at /lib/firmware on the lite2 but I am still not able to attach the device to uart1
How have you managed to configure uart1? Or are there some relevant differences in the kernel which haven't been ported to
the lite2 built yet?
-
So were you able to configure the device using hciattach?
-
hciattach is what you are asking for. e.g.
$ sudo hciattach /dev/ttyS1 bcm43xx 921600 noflow -
Can you attach the firmware to this thread?
OrangePi Lite2 onboard microphone
in Allwinner sunxi
Posted
There seems to be a driver available now:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210704092109.40670-1-fengzheng923@gmail.com/