Wester_Minsk

backup original android or my armbian?

2fabiobassa With android, box does not start with SD cards, the "toothpick" method does not work. I tried - multitool -> armbian in emmc -> didn't start with emnc -> start with sdcard armbian. Box started up, passed apt aupdate, then froze. I get cpu metod - perfomance 1000. two hours later on the screen: I do not plan on tuning my RK anymore. But if necessary for this topic, I can continue. p.s sorry for my English, my native language is Russian.

2fabiobassa Hi. Box life. 2 days works stably on the original firmware. I restored the backup via multitool. During the recovery, the multitool freezes, but the recovery continues. I think my RK is not optimized for these armbian images.

2fabiobassa I started the system with an sdcard, the freezes went immediately on downloading packages. After several attempts, the box finally died, it does not start with emmc and sdcard. It was a good experience for me. Thank you for your help!

I'm asking for help. I continue to test my box RK3318, there is a problem :(. which I can't handle. I don't have the necessary knowledge in linux. Box constantly freezes, and several times it did not start, I had to restore it from multitool. I am using the image of Arabian 21.08-Debian Buster minimal-mainline kernel 5.10.4 installed in eMMC. All updates are installed. Doker and homeassistance are installed. what I tried: in arm bin-config: Scaling governor: performance, conservative, ondemand cpu 1000 1300 1400 *rk3318-box-emmc-hc200 *rk3318-box-led-conf1 lastest Update: arm bin-config linux-deb-current-rockchip 64 linux-image-current-rockchip 64 linux-libc-dev only Lan only wifi cpu temperature 40-60 all these changes do not affect the freezes in any way. I put: Armbian 21.05-Debian Buster minimal-legacy kernel 4.4.213 - on this image is even worse, freezes on the start setting.. Now I'm starting to study logs: sudo ls /var/log alternatives.log bootstrap.log dpkg.log lost+found rpimonitor.log apparmor btmp faillog messages syslog apt chrony fontconfig.log nand-sata-install.log sysstat armbian-hardware-monitor.log daemon.log kern.log openvpn user.log auth.log debug lastlog private wtmp sudo less /var/log/armbian-hardware-monitor.log sudo less /var/log/bootstrap.log what can I do?

I didn't expect this kind of performance from the $ 20 box. Now for the test I transferred my HA server to RK3318, I'm testing its stability.

I understand. For my server Home assistant, 2GB is good. I did some tests https://pibenchmarks.com Rk3318 got 3900 score. For comparison my raspberry pi4 4gb + ssd got 7500 score.

maybe, but I have 8 x h5tq2g43bfr-h9c chips, datasheet say 512M.

Thank you so much for this method! My TV box A95XF2R_V20 worked perfectly with Armbian_21. 08. 0-trunk_Rk3318-box_buster_current_5. 10.41_minimal. img Only one problem in Armbian was determined by DDR3-2GB, and in my board 4GB. What should I do to have 4GB? Thanks.