I want to control some GPIO pins on my NanoPi Neo (H3) board and installed WiringNP. Executing commands results in the error
piBoardRev: Unable to determine board revision from /proc/cpuinfo
I've traced the source of the error down to this line, where WiringNP tries to open /sys/class/sunxi_info/sys_info to determine which board it is running on. This path is not present in my Armbian os. I'm using 4.11.12-sun8i #20 SMP armv7l armv7l armv7l GNU/Linux
Am I missing something here? Or are there alternatives to using WiringNP?
NanoPi Neo WiringNP missing /sunxi_info/sys_info
in Allwinner sunxi
Posted · Edited by Epyon
Hello all
I want to control some GPIO pins on my NanoPi Neo (H3) board and installed WiringNP. Executing commands results in the error
I've traced the source of the error down to this line, where WiringNP tries to open /sys/class/sunxi_info/sys_info to determine which board it is running on. This path is not present in my Armbian os. I'm using 4.11.12-sun8i #20 SMP armv7l armv7l armv7l GNU/Linux
Am I missing something here? Or are there alternatives to using WiringNP?