Jump to content

Asimov

Members
  • Posts

    10
  • Joined

  • Last visited

Reputation Activity

  1. Like
    Asimov got a reaction from mhc in Enable sound on Banana Pi M2 Ultra   
    I can enable bananpi M2 ultra sound (headphone and mic on pcb)  You must add this on the dtsi file.
     
            dma: dma-controller@01c02000 {
                compatible = "allwinner,sun8i-h3-dma";
                reg = <0x01c02000 0x1000>;
                interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&ccu CLK_BUS_DMA>;
                resets = <&ccu RST_BUS_DMA>;
                #dma-cells = <1>;
            };
            codec: codec@01c22c00 {
                #sound-dai-cells = <0>;
                compatible = "allwinner,sun8i-h3-codec";
                reg = <0x01c22c00 0x300>;
                interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
                clock-names = "apb", "codec";
                resets = <&ccu RST_BUS_CODEC>;
                dmas = <&dma 19>, <&dma 19>;
                dma-names = "rx", "tx";
                allwinner,codec-analog-controls = <&codec_analog>;
                allwinner,audio-routing =
                    "Headphone", "HP",
                    "LINEIN", "Line In",
                    "MIC1",    "MBIAS",
                    "MIC1", "Mic",
                    "MIC2", "HBIAS",
                    "MIC2", "Headset Mic";
                status = "okay";
            };
            codec_analog: codec-analog@01c22f00 {
                compatible = "allwinner,sun8i-a23-codec-analog";
                reg = <0x01c22f00 0x4>;
            };
     
    Then modules that must be loaded are
     
    sun8i_codec_analog     24576  1
    sun4i_codec            32768  3
    snd_soc_core          118784  2 sun4i_codec,sun8i_codec_analog
    snd_pcm_dmaengine      16384  1 snd_soc_core
    snd_pcm                65536  2 snd_pcm_dmaengine,snd_soc_core
    snd_timer              24576  1 snd_pcm
    snd                    45056  3 snd_timer,snd_soc_core,snd_pcm
    soundcore              16384  1 snd
     
    to test the player execute that to check the sound
    $ aplay /usr/share/sounds/alsa/Front_Center.wav
     
    then execute
    $ alsamixer
    to control the volumen and gain
     
    To enable mic do that.
    1) open alsamixer;
    2) press "tab" to switch to capture;
    3) press "bar" on the first capture channel;
    "L_____R" red sign should appear;
    4) select by arrow key MIC as the source of the first
    input source;
    2) record a test file:
    arecord -f cd -D hw:0,0 -d 10 test.wav
    play it back to test i.e.:
    mplayer test.wav
     
    Thats all ...
     
    best regards Asimov
     
     
  2. Like
    Asimov got a reaction from guidol in Enable sound on Banana Pi M2 Ultra   
    I can enable bananpi M2 ultra sound (headphone and mic on pcb)  You must add this on the dtsi file.
     
            dma: dma-controller@01c02000 {
                compatible = "allwinner,sun8i-h3-dma";
                reg = <0x01c02000 0x1000>;
                interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&ccu CLK_BUS_DMA>;
                resets = <&ccu RST_BUS_DMA>;
                #dma-cells = <1>;
            };
            codec: codec@01c22c00 {
                #sound-dai-cells = <0>;
                compatible = "allwinner,sun8i-h3-codec";
                reg = <0x01c22c00 0x300>;
                interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
                clock-names = "apb", "codec";
                resets = <&ccu RST_BUS_CODEC>;
                dmas = <&dma 19>, <&dma 19>;
                dma-names = "rx", "tx";
                allwinner,codec-analog-controls = <&codec_analog>;
                allwinner,audio-routing =
                    "Headphone", "HP",
                    "LINEIN", "Line In",
                    "MIC1",    "MBIAS",
                    "MIC1", "Mic",
                    "MIC2", "HBIAS",
                    "MIC2", "Headset Mic";
                status = "okay";
            };
            codec_analog: codec-analog@01c22f00 {
                compatible = "allwinner,sun8i-a23-codec-analog";
                reg = <0x01c22f00 0x4>;
            };
     
    Then modules that must be loaded are
     
    sun8i_codec_analog     24576  1
    sun4i_codec            32768  3
    snd_soc_core          118784  2 sun4i_codec,sun8i_codec_analog
    snd_pcm_dmaengine      16384  1 snd_soc_core
    snd_pcm                65536  2 snd_pcm_dmaengine,snd_soc_core
    snd_timer              24576  1 snd_pcm
    snd                    45056  3 snd_timer,snd_soc_core,snd_pcm
    soundcore              16384  1 snd
     
    to test the player execute that to check the sound
    $ aplay /usr/share/sounds/alsa/Front_Center.wav
     
    then execute
    $ alsamixer
    to control the volumen and gain
     
    To enable mic do that.
    1) open alsamixer;
    2) press "tab" to switch to capture;
    3) press "bar" on the first capture channel;
    "L_____R" red sign should appear;
    4) select by arrow key MIC as the source of the first
    input source;
    2) record a test file:
    arecord -f cd -D hw:0,0 -d 10 test.wav
    play it back to test i.e.:
    mplayer test.wav
     
    Thats all ...
     
    best regards Asimov
     
     
  3. Like
    Asimov reacted to guidol in Banana Pi M2U - A40 - ethernet interface problem   
    virtual USB2-port
  4. Like
    Asimov got a reaction from guidol in Banana Pi M2U - A40 - ethernet interface problem   
    I have a Custom SOM with A40i because we change from R40 to this core and the kernel that I use is 4.14 Stable or development on 4.18... and itś working ok... I don't change anything to run kernel on A40i because is the same (pin to pin compatible) with R40...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines