Blackie
-
Posts
11 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Blackie
-
-
Thank you, TX5 Plus is quite similar to TX3(based also on S905x3 CPU), just with a gigabit ethernet.
I am providing some DTS files so anyone could have a look and improve the DTB (add support for more chips inside the box).
meson-sm1-sei610-2.dts could be a good starting point. Compiled to DTB provides working GbE + SoundCard,
The other 2 files (meson-sm1-hk1box-vontar-x3.dts uses meson-sm1-x96-max-plus.dts as include) provide a working GbE, but no SoundCard.
No BT or Wifi adaptor was detected with any of the DTBs.
meson-sm1-sei610-2.dts meson-sm1-hk1box-vontar-x3.dts meson-sm1-x96-max-plus.dts
-
OK, found a DTS file meson-sm1-sei610-2.dts from dgm78 here.
During compiling the file to dtb a lot a warnings came to screen, but the resulting DTB is working.
Seems that both GbE and SoundCard are working fine.
You can find the file in the attachment in case you want test it.
Don't know how to make Wifi or BT work but I don't need them now...
My thanks goes to user dgm78
-
I used meson-sm1-sei610-x96maxplus.dtb from this thread for my Tanix TX5 Plus Deluxe box.
Most hardware is working (Soundcard OK, but 100 mb ethernet).
With meson-sm1-hk1box-vontar-x3.dtb from here Gigabit ethernet is working, but no sound.
Do you think it's possible to combine meson-sm1-sei610-x96maxplus.dtb posted by almotra with hk1box/Vontar gigabit version(DTS files are there too).
I presume source .dts file for meson-sm1-sei610-x96maxplus.dtb would be needed. Could anyone advice where to find it?
Maybe I could try to combine it myself when I find the source DTS file... Thanks a lot
-
Hello,
I have updated my TX5 Plus Deluxe (4GB/64GB,1Gb Eth) to the latest official Android firmware (newton 20201224) and finally managed to start
Armbian_20.10_Arm-64_buster_current_5.9.0.img from USB Flashdisk.
I tested several DTB files for ethernet speed and working soundcard (aplay -l).
Here are some results:
1. started with meson-sm1-sei610-ethfix.dtb recommended for Tanix TX3 (similar box). Result - NO SOUND, 100mb Ethernet
2. next - meson-sm1-sei610-x96maxplus.dtb I found here. Result is surprising - Gigabit ethernet WORKING, but no sound.
This is good news because it's working with original Tanix bootloader (speed confirmed via iperf3).
3. next - meson-sm1-sei610-x96maxplus.dtb from here - SoundCard WORKING, but only 100mb Ethernet.
root@armhassio:~# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SM1SEI610 [SM1-SEI610], device 0: fe.dai-link-0 (*) []
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: SM1SEI610 [SM1-SEI610], device 1: fe.dai-link-1 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SM1SEI610 [SM1-SEI610], device 2: fe.dai-link-2 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0I want working both SoundCard and Gigabit ethernet. Could anyone help me combine good parts from those 2 dtb files ?
Maybe it helps some other owners of this tvbox. Thanks a lot in advance.
-
1 hour ago, rob0809 said:
Finally received my SCISHION V88 Piano box. I was able to burn the DietPi image for Rock64 to a micro SD card, place it in the micro SD slot, apply power and it booted up to a login. The ethernet showed up as eth0 but I couldn't connect to anything. Wireless also wasn't working. I'm not sure what else is broken.
Thank you very much Rob for reporting. It's still not bad result for a start, booting from SD card seems to be a problem on many other boxes.
I hope some developers could help to resolve the ethernet issues in the future.
Can you test whether USB 3 port is working full speed?
-
Sorry, but I don't have the box to review it
Only review I found is video in portuguese? language (but I don't understand it): https://www.youtube.com/watch?v=2yjNHBoYWhc
Seems we have to wait until someone who already bought the box shares his opinions and experiences...
-
here is the the summary of features:
https://androidtvbox.eu/scishion-v88-piano-tv-box-powered-rockchip-rk3328-soc-now-44-99-promo/
-
Anyone tested "SCISHION V88 Piano" box? https://www.gearbest.com/tv-box/pp_1064854.html
Gigabit ethernet, 4GB ram, nice thermal case design, DRM widevine level 1, ... seems to me like a nice RK3328 box.
The smaller SCISHION box is booting from the card, not sure about this one.
Tanix TX5 Plus Deluxe(with external antenna) - need to combine 2 dtbs
in General Chat
Posted
Following is the result of some commands (run in the other Linux system) to identify chips inside:
Wifi/BT chip is RTL8822CS
udevadm info /sys/bus/sdio/devices/*
P: /devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
L: 0
E: DEVPATH=/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
E: DRIVER=rtl88x2cs
E: SDIO_CLASS=07
E: SDIO_ID=024C:C822
E: MODALIAS=sdio:c07v024CdC822
E: SUBSYSTEM=sdio
E: USEC_INITIALIZED=5959859
E: SYSTEMD_WANTS=rtkbt-firmware-aml.service
E: TAGS=:systemd:
Audio: aml_codec_T9015
aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
[ 1.238244@3] T9015 acodec used by auge, tdmout:1
Ethernet chip is Realtek RTL8211F RGMII
meson6-dwmac ff3f0000.ethernet: no reset control found
[ 0.803693@3] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 0.803698@3] Ring mode enabled
[ 0.803704@3] DMA HW capability register supported
[ 0.803709@3] Normal descriptors
[ 0.803711@3] RX Checksum Offload Engine supported
[ 0.803713@3] COE Type 2
[ 0.803716@3] TX Checksum insertion supported
[ 0.803717@3] Wake-Up On Lan supported
[ 0.803788@3] Enable RX Mitigation via HW Watchdog Timer
[ 0.807303@1] libphy: stmmac: probed
[ 0.807319@1] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[ 0.807324@1] eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[ 12.962204@2] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 12.962232@2] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Display panel: Select FD650 controller
12.170891@1] OpenVFD: Select FD650 controller
[ 12.170395@1] OpenVFD: Version: V1.3.0
[ 12.170405@1] OpenVFD: vfd_gpio_clk: #0 = 0x00; #1 = 0x41; #2 = 0x00;
[ 12.170408@1] OpenVFD: vfd_gpio_dat: #0 = 0x00; #1 = 0x40; #2 = 0x00;
[ 12.170410@1] OpenVFD: vfd_gpio_stb: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
[ 12.170413@1] OpenVFD: vfd_gpio0: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
[ 12.170416@1] OpenVFD: vfd_gpio1: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
[ 12.170418@1] OpenVFD: vfd_gpio2: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
[ 12.170421@1] OpenVFD: vfd_gpio3: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
[ 12.170423@1] OpenVFD: vfd_gpio_protocol: #0 = 0x00; #1 = 0x00;
[ 12.170426@1] OpenVFD: vfd_chars: #0 = 0x02; #1 = 0x04; #2 = 0x03; #3 = 0x02; #4 = 0x01;
[ 12.170430@1] OpenVFD: vfd_dot_bits: #0 = 0x00; #1 = 0x01; #2 = 0x02; #3 = 0x03; #4 = 0x04; #5 = 0x05; #6 = 0x06;
[ 12.170434@1] OpenVFD: vfd_display_type: #0 = 0x01; #1 = 0x00; #2 = 0x00; #3 = 0x03;
[ 12.170438@1] OpenVFD: Detected gpio chips: periphs-banks, aobus-banks.
[ 12.170443@1] OpenVFD: "periphs-banks" chip found. base = 410, pin count = 86, pin = 65, offset = 475
[ 12.170445@1] OpenVFD: "periphs-banks" chip found. base = 410, pin count = 86, pin = 64, offset = 474
[ 12.170447@1] OpenVFD: Skipping vfd_gpio_stb evaluation (0xFF)
[ 12.170449@1] OpenVFD: Skipping vfd_gpio0 evaluation (0xFF)
[ 12.170450@1] OpenVFD: Skipping vfd_gpio1 evaluation (0xFF)
[ 12.170451@1] OpenVFD: Skipping vfd_gpio2 evaluation (0xFF)
[ 12.170452@1] OpenVFD: Skipping vfd_gpio3 evaluation (0xFF)
[ 12.170891@1] OpenVFD: Select FD650 controller
[ 12.170960@1] OpenVFD: SW I2C interface intialized (address = 0x0000 (N/A), MSB mode, pull-ups off)