Andrés Rengifo

Hi I would like to add usbtv driver (STK1160) to the kernel, but I don't know how to use this information: https://www.olimex.com/wiki/STK1160-howto-linux-sunxi-3_4 Together with the Armbian repo https://github.com/igorpecovnik/lib

Try to change this values to your desired LCD screen size [disp_init] fb0_width = 1920 fb0_height = 1080 [lcd0_para] lcd_x = 1920 lcd_y = 1080 Finally, check the LCD pin-map and change the ports according to this parameters: lcddX

I've replaced the boot.cmd file, in the first line : "console=tty1" to "console=tty3" and "loglevel=1" to "loglevel=3" . Then recompiled using mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr . Finally I get just one line at boot : [0.0000] start_kernel()....

http://raspberrypi.stackexchange.com/questions/1214/how-to-add-custom-loading-screen

Try to change the boot logo by a fullscreen black bmp

Here my changes over the script.fex file to achieve compatibility with the 15.6FHD LCD display [disp_init] disp_init_enable = 1 disp_mode = 0 screen0_output_type = 1 screen0_output_mode = 4 screen1_output_type = 0 screen1_output_mode = 4 fb0_width = 1920 fb0_height = 1080 fb0_framebuffer_num = 2 fb0_format = 10 fb0_pixel_sequence = 0 fb0_scaler_mode_enable = 1 fb1_width = 1024 fb1_height = 600 fb1_framebuffer_num = 2 fb1_format = 10 fb1_pixel_sequence = 0 fb1_scaler_mode_enable = 0 lcd0_backlight = 0 lcd1_backlight = 197 lcd0_bright = 50 lcd0_contrast = 50 lcd0_saturation = 57 lcd0_hue = 50 lcd1_bright = 239 lcd1_contrast = 50 lcd1_saturation = 57 lcd1_hue = 50 [lcd0_para] lcd_used = 1 lcd_x = 1920 lcd_y = 1080 lcd_dclk_freq = 152 lcd_pwm_not_used = 0 lcd_pwm_ch = 0 lcd_pwm_freq = 1000 lcd_pwm_pol = 1 lcd_max_bright = 240 lcd_min_bright = 64 lcd_if = 3 lcd_hbp = 100 lcd_ht = 2226 lcd_vbp = 23 lcd_vt = 2284 lcd_vspw = 0 lcd_hspw = 0 lcd_hv_if = 0 lcd_hv_smode = 0 lcd_hv_s888_if = 0 lcd_hv_syuv_if = 0 lcd_lvds_ch = 1 lcd_lvds_mode = 0 lcd_lvds_bitwidth = 1 lcd_lvds_io_cross = 0 lcd_cpu_if = 0 lcd_frm = 1 lcd_io_cfg0 = 268435456 lcd_gamma_correction_en = 0 lcd_gamma_tbl_0 = 0x0 lcd_gamma_tbl_1 = 0x10101 lcd_gamma_tbl_255 = 0xffffff lcd_power_used = 1 lcd_power = port:PH08<1><0><default><1> lcd_pwm_used = 1 lcd_pwm = port:PB02<2><0><default><default> lcdd0 = port:PD00<3><0><default><default> lcdd1 = port:PD01<3><0><default><default> lcdd2 = port:PD02<3><0><default><default> lcdd3 = port:PD03<3><0><default><default> lcdd4 = port:PD04<3><0><default><default> lcdd5 = port:PD05<3><0><default><default> lcdd6 = port:PD06<3><0><default><default> lcdd7 = port:PD07<3><0><default><default> lcdd8 = port:PD08<3><0><default><default> lcdd9 = port:PD09<3><0><default><default> lcdd10 = port:PD10<3><0><default><default> lcdd11 = port:PD11<3><0><default><default> lcdd12 = port:PD12<3><0><default><default> lcdd13 = port:PD13<3><0><default><default> lcdd14 = port:PD14<3><0><default><default> lcdd15 = port:PD15<3><0><default><default> lcdd16 = port:PD16<3><0><default><default> lcdd17 = port:PD17<3><0><default><default> lcdd18 = port:PD18<3><0><default><default> lcdd19 = port:PD19<3><0><default><default> lcdd20 = port:PD20<3><0><default><default> lcdd21 = port:PD21<3><0><default><default>

It works, thanks

Ubuntu 12.04.5 LTS 64bits

I have the same problem while compiling kernel. I am trying to compile wheezy (without desktop and default branch) for the A20-OLinuXino-MICRO board .