[Can you install Armbian to NanoPi Neo Core eMMC?]

On 03/01/2018 at 11:49 AM, Igor said:

To some degree, it should. None of us has this board yet so we can't be 100% sure, but if it doesn't ... it can be quickly adjusted. I would suggest trying Nanopi Air image instead.

I'm actually going to use the one without eMMC. Won't be the Nanopi Neo image be more suitable then?

[Can you install Armbian to NanoPi Neo Core eMMC?]

Will Nanopi Neo armbian image work with Nanopi Neo Core?

[Orange Pi Zero Plus as an ethernet gadget]

1 hour ago, guidol said:

I think - you have to replace here eth0 with usb0
The following page is for the Raspberry, but could also help your OPi with the /etc/network/interfaces or the configuration within windows:
https://learn.adafruit.com/turning-your-raspberry-pi-zero-into-a-usb-gadget/ethernet-gadget

Thanks  it worked!

[Orange Pi Zero Plus as an ethernet gadget]

I changed /etc/network/interfaces to this

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static 
address 192.168.100.1 
netmask 255.255.255.0

and ran 

sudo ifdown eth0 && ifup eth0

but still there is no connection.

[Orange Pi Zero Plus as an ethernet gadget]

I changed g_serial to g_ether and my board is being detected as USB Ethernet/RNDIS Gadget on my pc but there is no connection. How do I ssh to the device? I tried with hostname.local but couldn't connect.

[Orange Pi Zero Plus as an ethernet gadget]

11 minutes ago, Igor said:

I actually wrote the exact procedure  Edit /etc/modules. Remove g_serial and add g_ether instead .... save and reboot.

 

But remember, it's still only a theory. I haven't tested this.

Thanks 

[Orange Pi Zero Plus as an ethernet gadget]

6 hours ago, Igor said:

Armbian uses g_serial by default with a modern kernel. With old, I lost track. I assume you only need to exchange it with g_ether? /etc/modules 

I'm actually very new to all these so can you please point out how I can exchange g_serial with g_ether?

[Orange Pi Zero Plus as an ethernet gadget]

How to use an Orange Pi Zero Plus as an ethernet gadget over usb otg using g_ether?