Jump to content

soerenderfor

Members
  • Posts

    115
  • Joined

  • Last visited

Posts posted by soerenderfor

  1. 36 minutes ago, AlexVS said:

    Installed Arabian 21.08.3 Booster with Linux 5.10.63 + OMV5. Used as a NAS.

    Please excuse my English.


    Okay, the rockpro64 as a small NAS is pretty cool. I still use my as a small storage server, vpn and some stuff. 

    - Do you use the rockpro64 NAS case?

  2. @TRS-80 - Ohh yes, i know your opinion about GUI - I will check it out, i have a ROCKPRO64 with 5 SSD just sitting on the shelf.. What do you want to do with it? RAID BACKUP?

    what about

    apt install spl-dkms zfs-dkms

    it it fails you can check the status with

     

    dkms status

     

  3. @TRS-80 - I haven't tried ZFS, but sounds interesting - Is the ZFS in  OMV good enough? I can install and try it out? The card i use now has been running for months now, also heavy read and write tasks, many different kernels, no problems at all. So stabil for sure. But i can try the ZFS out, you just say the word.

  4. @TRS-80 - Nice found, i have been testing around 10 sata cards, all of them 4 or 4+ ports.. And all "dirt" cheap cards have all been working, also out of the box.. But the more expensive cards have problems, all of them..

    I now use some "no name or so" PCI-E 3.0, 5 port card, with 5 SSD disks. And that card also can boot the system (Not all the cards can)

    @TRS-80 - If i should test something for you with the 5 port JMicron card i have, just tell and i will do so.

    Did look just now, the card is with JMicron chipset.

  5. @TRS-80 - I  do use i 5 port card now, works out of the box, and very cheap.. any ways.

    If i remember correct, i did something like this:
     

    cd /etc/udev/rules.d
    sudo nano 99-9230.rules

    in the file add this line
     

    ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x1b4b", ATTR{device}=="0x9230", RUN+="/bin/bash -c 'echo %k > /sys/bus/pci/drivers/ahci/bind'"

    reboot, and the card should be visible, in OMV

    Hi, i have inserted link from a older thread, where we talked about rockpro64 as a NAS
     

     

  6. @Waryle - Myself did use, uboot from.. Auyfan, i'm pretty sure, it was an img to burn on the sdcard to the spi. It was pretty easy. I will look for it tonight. Thanks.

    *Im not 100% sure if the uboot, was able to boot from any port, what card do you use?
    *This one on your sdcard -  u-boot-flash-spi-rockpro64.img.xz, boot up. If remember right it is that one, and when your box start blinking, it should be done. I did wait a minut, just to make sure it was done right.

    NOTE

    **2020.01-ayufan-2014-gff2cdd38 released

    ayufan: rockchip: allow to boot scsi4, as JMS585 can have 5 drives

  7. 1 hour ago, Salvador Liébana said:

    threadX is a black box, and? I don't see a limitation on that. 

     

    I agree with @NicoD , well described. I would say it is a brick wall. It isnt possible to make something to something you don't know "works" or "not"

    @Werner Is also right, it will take a hughe time to take "care" of the more unexpirenced, and guide them...

    But if you could get it up and running, why not @Salvador Liébana Thanks.

×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines