[Language Support Setting on Debian]

Quote

On 2/8/2019 at 3:41 PM, JMCC said:

 

I think that process is not necessary anymore, armbian-config should be enough to take care of configuring the locales.  @köksal please confirm if it worked for you.

 

İt works. Thanks you.  But when i set only with armbian-config, it didn't enough.  i used  "sudo locale-gen tr_TR.UTF-8 "  too.  Thank you @manuti.

[Teamviewer host unable to connect]

Hi, i run teamviewer on Orange pi pc plus. You may look at "https://orangepisersa.blogspot.com/2019/02/orange-pi-teamviewer.html"  If it doesn't work yet, you can say that which it is error?

[Language Support Setting on Debian]

Thank you, i have not known that.

[Language Support Setting on Debian]

"Language Support Setting" not exist on Menu of Debian(Armbian_5.69_Orangepipcplus_Debian_stretch_next_4.19.13)

[5V 2 A adapter]

I see,  i have 5V 2A adapter . I mean do I have a problem using it? Because I had used 5V 3A adapter and  and suddenly I hesitated to use it. 

[5V 2 A adapter]

Would I be using a 2-amp adapter instead of a 5-volt 3-amp? Is this a disadvantage?

[640x480 resolution display]

I have a 5 inch display and ı have a opi pc plus . its resolution is 640x480. But when ı want h3disp , ı don't see that.  So ı need to work this display.  I read all the  posts on the  forum but ı dont understand. ı know that need to change script.bin and hdmi configuration but  I do not understand as I say.   What can I do now? Could you help ?

[640x480 resolution display]

I think there's a software problem. Do I need to change the Script.bin file? Or do I have to  change something?

[640x480 resolution display]

I thought of it, but I tried both the 5 inch and the 7 inch screen. it can not be corrupted

[640x480 resolution display]

nothing happens. The screen is still dark.

[640x480 resolution display]

https://ru.aliexpress.com/item/7-tft-Pi-H3/32831758014.html?shortkey=NjiyQFvE&addresstype=600  . I have 5 ınch and 7ınch lcd. I connect with HDMI . 

[640x480 resolution display]

Hi, 

 

I have been working on this problem for a few days. I have a orangepi plus2e and orange pi 5'' lcd.  When I make all the connections and give power to the orangepi, I can not see anything on the LCD. At first only a white light comes out. Later on, I looked at the 5 inch screen produced by OrangePi with 640x480 resolution and the LCD settings on the H3 boards. I tried to set the resolution with the h3disp command, but I did not see the proper resolution. I did these on a different computer screen, and when I changed the resolution, nothing appeared on this screen.

[change the resolution]

ı have a lcd as ' http://s.aliexpress.com/NjiyQFvE  ' . I do all the connections correctly but the LCD screen does not appear. At first, a white light comes out on the screen. I could not find a manual or guide about this LCD.  How can ı chane the resolution as http://www.orangepi.org/Docs/LCDModule.html

[Orange pi zero does not see wifi networks.]

6 minutes ago, Igor said:

Optionally disable onboard wifi - blacklist the module xradio.

 

Then attach a good and supported wireless chip and you are good to go. 881x is a good choice but there are other good as well. You can find them on download page: https://www.armbian.com/orange-pi-zero/ (scroll down)

Thanks  for answering . At the Opi zero this wifi is  bad. As you said, the best solution is to buy a new wifi module.

[Orange pi zero does not see wifi networks.]

İf ı connection usb wifi to  my opi zero , is it connection wifi?.  The XR810 is already damaged. If ı add an extra wifi module(Realtek 8811AU or 8812AU), can it? 

[Orange pi zero does not see wifi networks.]

Hi ,

 

I have an orange pi zero .  I installed  armbian_5.38_Orangepizero_ubuntu_xenial_next_4.14.4  my orangepi zero.  when ı use 'sudo nmtui'   , it does not see wifi networks.  I read many questions and answers about this issue but ı dont solve.  I am waiting for your answers.