[OPi zero usb deny boot and instability]

The card has crashed yesterday at 17h50 (19h50 for me)

 

I've checked the log :http://ix.io/1oS9

 

It seems that the card il rebooting the morning at the same hour, the 9 and 10 October.

Armbian monitor give me a peek temp of the soc at 37°C so I dont think this is the problem (the attached file)

 

I have a serial to usb to check the card without network, that was crash, I have to disconnect it from the card and the computer in order to make it work again.

 

I've order I new sdcard to check if this is the problem.

 

 

[Orange pi pc+ emmc no boot]

I've try use the emmc storage on my Orange Pi (which was working on previous kernel).

Copy seems to work with latest armbian-config but the boot loop on :

Begin: Running /scripts/local-block ... done.

 

Here is the full log :

U-Boot 2018.05-armbian (Sep 19 2018 - 12:58:14 +0200) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi PC Plus
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
Loading Environment from EXT4... MMC: no card present
** Bad device mmc 0 **
Failed (-5)
In:    serial
Out:   serial
Err:   serial
Net:   phy interface0
eth0: ethernet@1c30000
MMC: no card present
** Bad device mmc 0 **
MMC: no card present
** Bad device mmc 0 **
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
USB4:   USB EHCI 1.00
USB5:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning bus 4 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Autoboot in 1 seconds, press <Space> to stop
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3708 bytes read in 8 ms (452.1 KiB/s)
## Executing script at 43100000
U-boot loaded from eMMC or secondary SD
Boot script loaded from mmc
249 bytes read in 2 ms (121.1 KiB/s)
MMC: no card present
** Bad device mmc 0 **
5099960 bytes read in 250 ms (19.5 MiB/s)
6979808 bytes read in 342 ms (19.5 MiB/s)
Found mainline kernel configuration
32641 bytes read in 28 ms (1.1 MiB/s)
** File not found /boot/dtb/overlay/-fixup.scr **
## Loading init Ramdisk from Legacy Image at 43300000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    5099896 Bytes = 4.9 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
   Loading Ramdisk to 49b22000, end 49fff178 ... OK
   reserving fdt memory region: addr=43000000 size=6e000
   Loading Device Tree to 49ab1000, end 49b21fff ... OK

Starting kernel ...

Loading, please wait...
starting version 232
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root file system device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/mmcblk0p1 does not exist.  Dropping to a shell!
Rebooting automatically due to panic= boot argument
[   46.790736] reboot: Restarting system

 

 

[OPi zero usb deny boot and instability]

Thanks martinayotte,

 

So I've reflashed my sdcard (fs was corrupted after to many reboot i think)

 

I've disable xradio, lowered cpufreq to 600Mhz, installed ser2net and armbian monitor.

 

Boot was succesfull with usb, soc temp is at 29°C (if sensor is accurate )

 

I just have to wait some days

 

[OPi zero usb deny boot and instability]

Thanks chwe, I doesn't know but that useful.

That's going to help me to save lot's of time.

 

Is there a guide to disable xradio ?

[OPi zero usb deny boot and instability]

I've lowered frequency to 800Mhz (don't need so much power).

 

Can i find where usb hang without screen ?

 

[OPi zero usb deny boot and instability]

Hello,

 

I use armbian latest version on a Orange Pi Zero (256Mb) to send data from usb to network.

I use Ser2net for this to stream data from a rflink device.

To test I use a Metrix bench power supply, so i think power is ok.

If I reboot the device with usb plugged the boot fail, so i have to boot without usb plugged and then plug usb and restart ser2net daemon to make it work.

I think boot is searching for usb device, is it possible to disable this ?

 

Next the board crash every 2 or 3 days, network stop responding and soc heatsink goes hot.

I restart the device and it's good for 2 or 3 days, and crash...

If it help armbianmonitor -u gives : http://ix.io/1nxB

 

If anyone has an idea ?

 

[Opi PC Plus]

It was the power supply.

 

Thanks

 

[Opi PC Plus]

Hello, I've try several version of armbian (stable, testing, debian, ubuntu) but I stopped at the same point :

 

U-boot 2017.09-armbian (Nov 22 2017 - 16:49:59 +0100) Allwinner Technology

CPU: Allwinner H3 (SUN8I 1680)

Model: Xunlong Orange Pi PC Plus

DRAM : 1GiB

MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1

*** Warning - bad CRC, using default environment

In : serial

Out: vidconsole

Err: vidconsole

Net : phy interface0

eth0: ethernet@1c30000

With ethernet or without : no change

With keybord, the five last lines aren't here

 

Doesn't understand what this mean.