torba
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by torba
-
-
so, i have tested the dev image. With the armbian_dev image been flashed on an sd card I can boot into it. But there's no /dev/mmcblk2 device visible which is the emmc. So I boot into solidrun image flashed the armbian_dev image onto /dev/mmcblk2 and rebooted. Here's the output:
QuoteU-Boot SPL 2018.03-armbian (May 30 2018 - 19:24:03 +0000)
Trying to boot from MMC1
Card did not respond to voltage select!
spl: mmc init failed with error: -95
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###it is still looks for an sd card.
-
ah you mean a complete image. I thought it just a u-boot. Ok, I'll test
-
right, but I can't boot neither from emmc nor from an SD Card
-
So I downloaded Armbian Stretch image here https://www.armbian.com/hummingboard-2/
and dd it onto an SD Card. As it didn't produce any output during boot after 'uncompressing kernel' I had to add 'console=both' into the armbianEnv.txt. After that I could see that I land into (initramfs). It looked like it couldn't see the rootfs for some reason. So additionally I've changed rootdev to 'rootdev=/dev/mmcblk0p1' in the armbianEnv.txt. Still the same problem
QuoteNo init found. Try passing init= bootarg.
(initramfs) mmc0: error -110 whilst initialising SD card
mmc0: error -110 whilst initialising SD card
here is the full boot log https://pastebin.com/K64xKHBd
What am I doing wrong?
2. Provided that the problem above is easy to fix, how do I start a script after the first boot? Solidrun images have /etc/runonce.d/ scripts but nothing like that in Armbian rootfs. I've seen a template in the /boot but is it possible to start a script to allocate a new partition after the first boot?
The only reason why I want to try Armbian is because I cannot use Solidrun image to boot from eMMC with the v1.5 SOC. And I've seen some patches merged into Armbian to solve this problem
Can't boot Armbian-Stretch image on hummingboard2 edge v1.5 Som
in Other families
Posted
last commit 4 months ago. Doesn't look very active development to me. Well thanks anyway