Jump to content

Anatolii Kraskovskiy

Members
  • Posts

    20
  • Joined

  • Last visited

Everything posted by Anatolii Kraskovskiy

  1. Всем спасибо за участие После опробования нескольких сборок, можно сделать вывод - armbian как всегда на высоте Конечно есть недостатки. Одни - сними можно смерится, другие - подробность и доступность документации - желательно устранять Методики "борьбы" за живучесть, чёткой нет. Linux довольно сложная система, а систематизированная литература не так много (в принципе я не нашёл) (кроме выбора SD карточки и блока питания), а то что есть, не очень соответствует .. Чувствуется, что при создании системы "веселились" все кому не лень (если только хватало мозгов) А теперь конкретно по плате и ос к ней Orange Pi Zero Plus2 H5 очень привлекательная плата (просто то что надо для малых систем контроля и управления), даже малый объем оперативной памяти (по сравнению с смартфонами) не смущает. На ней практически есть всё что надо и самое главное emmc. Что опробовано - работа с ком портом, работа с микрофоном и опознаванием речи. Из всех сборок на момент лета 2018 года наиболее подходящая 5.38 stabile Debian 9 и 5.38 stabile Ubuntu 14 Причина, почему я задавал вопросы (нет): Нет инструкций, что бы и как подключить, и как обращаться с программным обеспечением Почему не было изображения - не запускался рабочий стол - не корректные установки дисплея рабочего стола - автоматическое определение, не все мониторы и телевизоры автоматически могут определятся. Почему не работала клавиатура и мышка - все завязано на идентификацию по дисплею, а так как идентификация не прошла корректно клавиатура и мыш не заработали
  2. проблема решена (какая-то странная) Я заменил монитор изменил разрешение but this is not a solution to the question firmware of other manufacturers are working properly !!!!!!!!
  3. h5@orangepizeroplus2:~$ sudo tvservice -p [sudo] password for h5: sudo: tvservice: command not found
  4. armbian_5.58.180813 все порты работают, я проверил, написал сценарий на python, ttyS2 и ttyUSB0 установить WiringPiH5 - рабочий после повторных обновлений появились все режимы отображения but anyway, with an overload or when you turn on you have to pull the cable in time hdmi рус - но всё равно , при перегрузки или при включении надо вовремя передёрнуть кабель
  5. /boot/armbianEnv.txt verbosity = 1 console = both overlay_prefix = sun50i-h5 overlays = analog-codec uart2 usbhost2 usbhost3 rootdev = UUID = 24769c95-0527-419b-9d00-51dbb2e34929 rootfstype = ext4 usbstoragequirks = 0x2537: 0x1066: u, 0x2537: 0x1068: u Спасибо за совет не работал
  6. I understand that these are not stable versions I do not know how to work with the Linux kernel on this and I ask the experts how to solve this or that problem forums have been set up for this but now on the merits: if there is a chance to help - tell me 1 armbian_5.58.180813 When you start , each time you have to switch the cable hdmi there is no sound for hdmi can not install Gambas 3 2 Armbian_5.42_Orangepizeroplus2-h5_Debian_stretch_dev_4.16.0.img on debian 8 end 9 , ubuntu 14 and 16 - gambas - is established dut the mouse and keyboard do not work. I want to apply this
  7. Armbian_5.42_Orangepizeroplus2-h5_Debian_stretch_dev_4.16.0.img keyboard input does not work no mouse control management only through pyttu monitor (xdmi) works, the image is displayed how to make the keyboard and mouse work?
  8. У меня такая же проблема armbian_5.58.180813 after Запуск ядра ... Экран станет синим, нет сигнала os на emmc установить минимальный рабочий стол - это принципиально - если вы установите все программное обеспечение - 1366 * 768 - нет - если вы обновляете - 1366 * 768 - нет если на момент запуска ядра ... отсоединить кабель HDMI и подключиться через 3-4 секунды, рабочий стол запущен, изображение
  9. armbian_5.58.180813 TIME ] Timed out waiting for device dev-ttyGS0.device. [DEPEND] Dependency failed for Serial Getty on ttyGS0. desktop installed after Starting kernel ... The screen turns blue, there is no signal if at the moment Starting kernel ... disconnect the cable HDMI , and connect after 3-4 seconds , the desktop is running ,image is after reboot - image is after shutdown - no image
  10. Someone can give instructions on how to work with the firmware of Armbian. 1 connection of HDMI after loading 2 start the desktop
  11. Well now it's clear what's the matter - there is no support for hdmi, the first time it's turned on. The omission on the part of the developers, about this or where it is not said, is very sad through putty went into the config, but how to enable hdmi?
  12. Dietpi works, but there you need to additionally put everything, + a start script that I do not need to solve my task, on the day I need a 64-bit mini computer with EMMC raspberry has no EMMC, and it is larger in size firmware that was not downloaded from https://www.armbian.com/orange-pi-zero-2-h5/
  13. All the firmware that I found on the Internet for Orange pi Zero plus 2, except Armbian, - work. Posted on the site Armbian for Orange pi Zero plus 2, neither the server nor the desktop - do not load, just start as in the photo and then the blue screen. Previously, the firmwares were laid out old, nightly, now this is not (or I do not know how to see them), this is bad
  14. I have several cards, all with a recording speed of more than 10, specially selected, tested on Orange Pc plas, as well as checked for ubuntu, debian, dietpi. power supply 5 V 5 A, we check oscilloscope, there are no dips and no noise
  15. all firmware for Orange pi Zero plus 2 (H5) - do not start. loading stops as b on the photo of after that the screen turns blue, and the download stops debian , ubuntu , dietpi - are working But they can not be transferred to EMMC
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines