Jump to content

Ravaz

Members
  • Posts

    15
  • Joined

  • Last visited

Everything posted by Ravaz

  1. Hello, have you got any new finding on this topic?
  2. Seems related to this: https://forum.armbian.com/topic/12542-rtl8723bs-in-ap-mode-gets-kernel-errors/?tab=comments#comment-92905 Did you manage to find a fix for this issue?
  3. I tried to create a patch for the tinker board following Igor example (see patch below), but the problem persists. Problem must be elsewhere. diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c index f819abb75..738dcb2ae 100644 --- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c +++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c @@ -2414,6 +2414,7 @@ void rtw_cfg80211_indicate_sta_assoc(struct adapter *padapter, u8 *pmgmt_frame, ie_offset = _REASOCREQ_IE_OFFSET_; sinfo.filled = 0; + sinfo.pertid = 0; sinfo.assoc_req_ies = pmgmt_frame + WLAN_HDR_A3_LEN + ie_offset; sinfo.assoc_req_ies_len = frame_len - WLAN_HDR_A3_LEN - ie_offset; cfg80211_new_sta(ndev, GetAddr2Ptr(pmgmt_frame), &sinfo, GFP_ATOMIC);
  4. Hello, I'm trying to show a startup logo a Tinker Board without success. I tried to add a parameter logo=/boot/boot.bmp to /boot/armbianEnv.txt but it doesn't work. Is the boot logo implemented on the Tinker Board? Does it require a patch? Thanks for your feedback.
  5. Yes, this seems to be the missing patch. I will test it upon my return from holidays in one week time. Thanks a lot for the lightning fast feedback!
  6. Hello, I'm unable to make the RTL8723BS chip on my Tinker Board to work on AP mode with the 5.4 kernel (same configuration works on legacy kernel). When I try to connect I get this error on dmesg: RTL8723BS: ap recv deauth reason code(3) sta:40:4e:36:cf:8a:18 On the console I also get a bunch of kernel errors similar to this: Message from syslogd@localhost at Dec 27 14:26:11 ... kernel:[ 799.239910] ff60: bf0377a4 dd8057e8 dd07ffac dd07ff78 c014a17c bf0377b0 de2d9128 de2d9128 Is this a known problem? Thanks
  7. Hello, is it possible to install WiringPi on Rock Pi 4? I tried to install WiringX using the instructions on https://github.com/wiringX/wiringX , but after installing it the command "gpio" is not present. Any hint on how to get "gpio" command on Rock Pi 4? Thanks
  8. Ravaz

    Rock Pi 4 ttyS2

    Hello, ttyS2 is used for console output by default. In my application I need this port for custom communication. Is there any way to disable the console on it? Thanks
  9. Hello, could you please share your configuration files (interfaces and wpa_suplicant.conf) as an example on how to achieve WiFi connection using the wpa_supplicant method? Thanks.
  10. I recompiled the full image with default and next kernel, but still no luck. I also modified the device tree to force USB to peripheral. (dr_mode="peripheral"): usb@ff580000 { compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x0 0xff580000 0x0 0x40000>; interrupts = <0x0 0x17 0x4>; clocks = <0x7 0x1c1>; clock-names = "otg"; dr_mode = "peripheral"; g-np-tx-fifo-size = <0x10>; g-rx-fifo-size = <0x118>; g-tx-fifo-size = <0x100 0x80 0x80 0x40 0x20 0x10>; g-use-dma; phys = <0x50>; phy-names = "usb2-phy"; status = "okay"; phandle = <0xcf>; }; The g_ether gadget only works if the cable is connected during boot, connecting the USB cable afterward has no effect. not even a single message on dmesg. It seems that the USB ID pin must be tied to GND during boot process, otherwise the USB OTG cannot enter peripheral mode anymore. Any suggestion on what I should try next?
  11. Yes I'm able to compile it myself, I already did it to add few drivers (g_ether and RTC PCF2127) and to create an image using btrfs file system. Thanks a lot.
  12. When I stat the board without the USB cable connected I get this error on dmesg (running on kernel 4.4.161-rockchip): [ 1.016700] dwc2 ff580000.usb: dwc2_core_reset() HANG! Soft Reset GRSTCTL=80000001 [ 1.127654] dwc2 ff580000.usb: dwc2_wait_for_mode: Couldn't set device mode Googling this message brought me to those bugs: https://www.spinics.net/lists/arm-kernel/msg564614.html Any patch to solve this issue?
  13. Hello, I'm enabling g_ether driver on tinker board. The driver works and I'm able to emulate an Ethernet adapter on my PC when I connect it to the tinker micro USB port. This only works if the micro USB connection exists before powering ON the board. If I connect it while the device is already running nothing happens. This behavior may be related to the following kernel path: https://patchwork.kernel.org/patch/10535905/ Is there any parameter I can add to avoid the USB from going to hibernate state? Or would it be possible to add the mentioned patch to armbian build tool? Thanks!
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines