Jump to content

Paco Martos

Members
  • Posts

    1
  • Joined

  • Last visited

Posts posted by Paco Martos

  1.  

    First of all I wanted to thank all those who make this world possible. I'm not an expert in linux / kernel / coding and similar things I have been trying for several days to make tvheadend work in the decoder ferguson ariva 4k combo without any success. I have tried:

    armbian s905: debian / desktop

    5.37 5.44 5.55 5.59

    with different dtb.img 

    several made it boot

     

        Only in 5.59     with meson-gxbb-nanopi-k2.dtb   did the wifi work           and none detected the dvbs2: I have also tried without success to add to the

    dtb the lines related to dvb of the original dtb file of the deco

     

     ls / dev / dvb ls:
    
    can not access '/ dev / dvb': No such file or directory
    
    root @ aml: ~ # lspci | grep Multimedia pcilib:
    
    Can not open / proc / bus / pci lspci:
    
    Can not find any working access method.
    
    root @ aml: ~ # dmesg | grep -i dvb
    
    root @ aml: ~ # dmesg | grep -i media
    
    [1.419062] media: Linux media interface: v0.10
    
    [3.538397] Synopsys Designware Multimedia Card Interface Driver

     

    -libreelec / coreelec: I have tried it with different versions combining with different dtbs.

    Wi-Fi never worked though if it worked eth.  dvbs2 is detected with gxbb-k1-plus.dtb.  but it is impossible to tune anything.

     

    I am disappointed and I do not know if it will be possible to make it work. Can someone help me?

     

    More deco information: s905    1gb / 8gb           tuner    dvb s-s2 avl2011             dvb t-t2 avl6762  (I only need dvb S s2 working, dvbt isnt important for me)

     

    Im looking to upload the original dtb file from deco but i dont see how to do it, so i put on the spoiler the dts content

    Spoiler

    /dts-v1/;

    / {
        model = "Amlogic";
        compatible = "amlogic, Gxbb";
        interrupt-parent = <0x1>;
        #address-cells = <0x2>;
        #size-cells = <0x2>;

        cpus {
            #address-cells = <0x2>;
            #size-cells = <0x0>;

            cpu@0 {
                device_type = "cpu";
                compatible = "arm,cortex-a53", "arm,armv8";
                reg = <0x0 0x0>;
                enable-method = "psci";
                timer = <0x2>;
            };

            cpu@1 {
                device_type = "cpu";
                compatible = "arm,cortex-a53", "arm,armv8";
                reg = <0x0 0x1>;
                enable-method = "psci";
                timer = <0x3>;
            };

            cpu@2 {
                device_type = "cpu";
                compatible = "arm,cortex-a53", "arm,armv8";
                reg = <0x0 0x2>;
                enable-method = "psci";
                timer = <0x4>;
            };

            cpu@3 {
                device_type = "cpu";
                compatible = "arm,cortex-a53", "arm,armv8";
                reg = <0x0 0x3>;
                enable-method = "psci";
                timer = <0x5>;
            };
        };

        timer {
            compatible = "arm, meson-timer";
            #address-cells = <0x2>;
            #size-cells = <0x2>;
            ranges;
            reg = <0x0 0xc1109990 0x0 0x4 0x0 0xc1109988 0x0 0x4>;

            timer-f {
                timer_name = "MESON TIMER-F";
                clockevent-rating = <0x12c>;
                clockevent-shift = <0x14>;
                clockevent-features = <0x3>;
                interrupts = <0x0 0x3c 0x1>;
                bit_enable = <0x10>;
                bit_mode = <0xc>;
                bit_resolution = <0x0>;
                reg = <0x0 0xc1109994 0x0 0x4>;
                linux,phandle = <0x2>;
                phandle = <0x2>;
            };

            timer-g {
                timer_name = "MESON TIMER-G";
                clockevent-rating = <0x12c>;
                clockevent-shift = <0x14>;
                clockevent-features = <0x3>;
                interrupts = <0x0 0x3d 0x1>;
                bit_enable = <0x11>;
                bit_mode = <0xd>;
                bit_resolution = <0x2>;
                reg = <0x0 0xc1109998 0x0 0x4>;
                linux,phandle = <0x3>;
                phandle = <0x3>;
            };

            timer-h {
                timer_name = "MESON TIMER-H";
                clockevent-rating = <0x12c>;
                clockevent-shift = <0x14>;
                clockevent-features = <0x3>;
                interrupts = <0x0 0x3e 0x1>;
                bit_enable = <0x12>;
                bit_mode = <0xe>;
                bit_resolution = <0x4>;
                reg = <0x0 0xc110999c 0x0 0x4>;
                linux,phandle = <0x4>;
                phandle = <0x4>;
            };

            timer-i {
                timer_name = "MESON TIMER-I";
                clockevent-rating = <0x12c>;
                clockevent-shift = <0x14>;
                clockevent-features = <0x3>;
                interrupts = <0x0 0x3f 0x1>;
                bit_enable = <0x13>;
                bit_mode = <0xf>;
                bit_resolution = <0x6>;
                reg = <0x0 0xc11099a0 0x0 0x4>;
                linux,phandle = <0x5>;
                phandle = <0x5>;
            };
        };

        arm_pmu {
            compatible = "arm,armv8-pmuv3";
            interrupts = <0x0 0x89 0x4 0x0 0x8a 0x4 0x0 0x99 0x4 0x0 0x9a 0x4>;
        };

        pm {
            compatible = "amlogic, pm";
            device_name = "aml_pm";
            gxbaby-suspend;
            reg = <0x0 0xc81000a8 0x0 0x4 0x0 0xc810023c 0x0 0x4>;
        };

        mali@d00c0000 {
            compatible = "arm,mali-450";
            interrupt-parent = <0x1>;
            reg = <0x0 0xd00c0000 0x0 0x40000 0x0 0xc883c000 0x0 0x4 0x0 0xc8100000 0x0 0x4>;
            interrupts = <0x0 0xa0 0x4 0x0 0xa1 0x4 0x0 0xa2 0x4 0x0 0xa3 0x4 0x0 0xa4 0x4 0x0 0xa5 0x4 0x0 0xa6 0x4 0x0 0xa7 0x4 0x0 0xa8 0x4 0x0 0xa9 0x4>;
            interrupt-names = "IRQGP", "IRQGPMMU", "IRQPP", "IRQPMU", "IRQPP0", "IRQPPMMU0", "IRQPP1", "IRQPPMMU1", "IRQPP2", "IRQPPMMU2";
            pmu_domain_config = <0x1 0x2 0x4 0x4 0x0 0x0 0x0 0x0 0x0 0x1 0x2 0x0>;
            pmu_switch_delay = <0xffff>;
            num_of_pp = <0x3>;
            def_clock = <0x3>;
            sc_mpp = <0x3>;
            tbl = <0x6 0x7 0x8 0x9 0xa 0xb>;
            clocks = <0xc 0x8 0xc 0x9 0xc 0x11 0xc 0x12 0xc 0x1e 0xc 0x15 0xc 0x13 0xc 0x14>;
            clock-names = "fclk_div3", "fclk_div4", "fclk_div5", "fclk_div7", "gp0_pll", "clk_mali", "clk_mali_0", "clk_mali_1";
            control_interval = <0xc8>;
            dvfs_tbl = <0xd>;

            clk125_cfg {
                clk_freq = <0x7735940>;
                clk_parent = "fclk_div4";
                clkp_freq = <0x1dcd6500>;
                voltage = <0x47e>;
                keep_count = <0x5>;
                threshold = <0x1e 0x78>;
                linux,phandle = <0x6>;
                phandle = <0x6>;
            };

            clk250_cfg {
                clk_freq = <0xee6b280>;
                clk_parent = "fclk_div4";
                clkp_freq = <0x1dcd6500>;
                voltage = <0x47e>;
                keep_count = <0x5>;
                threshold = <0x50 0xaa>;
            };

            clk285_cfg {
                clk_freq = <0x10fcc140>;
                clk_parent = "fclk_div7";
                clkp_freq = <0x10fcc140>;
                voltage = <0x47e>;
                keep_count = <0x5>;
                threshold = <0x64 0xbe>;
                linux,phandle = <0x7>;
                phandle = <0x7>;
            };

            clk400_cfg {
                clk_freq = <0x17d78400>;
                clk_parent = "fclk_div5";
                clkp_freq = <0x17d78400>;
                voltage = <0x47e>;
                keep_count = <0x5>;
                threshold = <0x98 0xcf>;
                linux,phandle = <0x8>;
                phandle = <0x8>;
            };

            clk500_cfg {
                clk_freq = <0x1dcd6500>;
                clk_parent = "fclk_div4";
                clkp_freq = <0x1dcd6500>;
                voltage = <0x47e>;
                keep_count = <0x5>;
                threshold = <0xb4 0xdc>;
                linux,phandle = <0x9>;
                phandle = <0x9>;
            };

            clk666_cfg {
                clk_freq = <0x27b25a80>;
                clk_parent = "fclk_div3";
                clkp_freq = <0x27b25a80>;
                voltage = <0x47e>;
                keep_count = <0x5>;
                threshold = <0xd2 0xec>;
                linux,phandle = <0xa>;
                phandle = <0xa>;
            };

            clk800_cfg {
                clk_freq = <0x2f34f600>;
                clk_parent = "gp0_pll";
                clkp_freq = <0x2f34f600>;
                voltage = <0x47e>;
                keep_count = <0x5>;
                threshold = <0xe6 0xff>;
                linux,phandle = <0xb>;
                phandle = <0xb>;
            };
        };

        interrupt-controller@2c001000 {
            compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
            #interrupt-cells = <0x3>;
            #address-cells = <0x0>;
            interrupt-controller;
            reg = <0x0 0xc4301000 0x0 0x1000 0x0 0xc4302000 0x0 0x100>;
            interrupts = <0x1 0x9 0xf04>;
            linux,phandle = <0x1>;
            phandle = <0x1>;
        };

        aml_restart {
            compatible = "aml, restart";
            sys_reset = <0x84000009>;
            sys_poweroff = <0x84000008>;
        };

        psci {
            compatible = "arm,psci";
            method = "smc";
            cpu_suspend = <0xc4000001>;
            cpu_off = <0x84000002>;
            cpu_on = <0xc4000003>;
            migrate = <0xc4000005>;
        };

        secmon {
            compatible = "aml,secmon";
            memory-region = <0xe>;
            in_base_func = <0x82000020>;
            out_base_func = <0x82000021>;
        };

        secos {
            compatible = "aml,secos";
            memory-region = <0xf>;
        };

        securitykey {
            compatible = "aml, securitykey";
            storage_query = <0x82000060>;
            storage_read = <0x82000061>;
            storage_write = <0x82000062>;
            storage_tell = <0x82000063>;
            storage_verify = <0x82000064>;
            storage_status = <0x82000065>;
            storage_list = <0x82000067>;
            storage_remove = <0x82000068>;
            storage_in_func = <0x82000023>;
            storage_out_func = <0x82000024>;
            storage_block_func = <0x82000025>;
            storage_size_func = <0x82000027>;
        };

        cpu_iomap {
            compatible = "amlogic,iomap";
            #address-cells = <0x2>;
            #size-cells = <0x2>;
            ranges;

            io_cbus_base {
                reg = <0x0 0xc1100000 0x0 0x100000>;
            };

            io_apb_base {
                reg = <0x0 0xd0000000 0x0 0x200000>;
            };

            io_aobus_base {
                reg = <0x0 0xc8100000 0x0 0x100000>;
            };
        };

        cpufreq-meson {
            compatible = "amlogic, cpufreq-scpi";
            status = "okay";
            clocks = <0x10 0x0>;
            clock-names = "cpu_clk";
        };

        amlogic-watchdog {
            compatible = "amlogic, gx-wdt";
            status = "disable";
            default_timeout = <0xa>;
            reset_watchdog_method = <0x1>;
            reset_watchdog_time = <0x2>;
            shutdown_timeout = <0xa>;
            firmware_timeout = <0x6>;
            suspend_timeout = <0x6>;
            reg = <0x0 0xc11098d0 0x0 0x10>;
            clocks = <0xc 0x2>;
        };

        meson_clock {
            compatible = "amlogic, gxbb-clock";
            reg = <0x0 0xc883c000 0x0 0x1000 0x0 0xc8100000 0x0 0x1000>;
            #clock-cells = <0x1>;
            #reset-cells = <0x1>;
            sys_max = <0x5b8d8000>;
            linux,phandle = <0xc>;
            phandle = <0xc>;
        };

        pinmux {
            compatible = "amlogic, pinmux-gxbb";
            dev_name = "pinmux";
            #pinmux-cells = <0x2>;
            #address-cells = <0x2>;
            #size-cells = <0x2>;
            reg = <0x0 0xc1109880 0x0 0x10>;
            ranges;

            banks@c11080b0 {
                reg = <0x0 0xc88344b0 0x0 0x28 0x0 0xc88344e8 0x0 0x14 0x0 0xc8834120 0x0 0x14 0x0 0xc8834430 0x0 0x40>;
                reg-names = "mux", "pull", "pull-enable", "gpio";
                gpio-controller;
                #gpio-cells = <0x2>;
                linux,phandle = <0x20>;
                phandle = <0x20>;
            };

            ao-bank@c1108030 {
                reg = <0x0 0xc8100014 0x0 0x8 0x0 0xc810002c 0x0 0x4 0x0 0xc8100024 0x0 0x8>;
                reg-names = "mux", "pull", "gpio";
                gpio-controller;
                #gpio-cells = <0x2>;
                linux,phandle = <0x69>;
                phandle = <0x69>;
            };

            eth_pins {
                amlogic,setmask = <0x6 0x3dfb>;
                amlogic,clrmask = <0x6 0xc000 0x5 0x3c0000f0 0x4 0x300>;
                amlogic,pins = "GPIOZ_0", "GPIOZ_1", "GPIOZ_2", "GPIOZ_3", "GPIOZ_4", "GPIOZ_5", "GPIOZ_9", "GPIOZ_10", "GPIOZ_11", "GPIOZ_15";
                linux,phandle = <0x1f>;
                phandle = <0x1f>;
            };

            remote_pin {
                amlogic,setmask = <0x10 0x1>;
                amlogic,pins = "GPIOAO_7";
                linux,phandle = <0x1b>;
                phandle = <0x1b>;
            };

            ao_uart {
                amlogic,setmask = <0x10 0x1800>;
                amlogic,pins = "GPIOAO_0", "GPIOAO_1";
            };

            ao_b_uart {
                amlogic,setmask = <0x10 0x1800000>;
                amlogic,pins = "GPIOAO_4", "GPIOAO_5";
            };

            a_uart {
                amlogic,setmask = <0x4 0x3c00>;
                amlogic,pins = "GPIOX_12", "GPIOX_13", "GPIOX_14", "GPIOX_15";
                linux,phandle = <0x57>;
                phandle = <0x57>;
            };

            b_uart {
                amlogic,setmask = <0x2 0x30000000>;
                amlogic,pins = "GPIODV_24", "GPIODV_25";
            };

            c_uart {
                amlogic,setmask = <0x1 0xc0000>;
                amlogic,pins = "GPIOY_13", "GPIOY_14";
                linux,phandle = <0x58>;
                phandle = <0x58>;
            };

            wifi_32k_pins {
                amlogic,setmask = <0x2 0x40000000>;
                amlogic,clrmask = <0x2 0x400000 0x3 0x8000>;
                amlogic,pins = "GPIOX_19";
                linux,phandle = <0x24>;
                phandle = <0x24>;
            };

            sd_clk_cmd_pins {
                amlogic,setmask = <0x2 0xc00 0x10 0x1800>;
                amlogic,pins = "CARD_2", "CARD_3";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x25>;
                phandle = <0x25>;
            };

            sd_all_pins {
                amlogic,setmask = <0x2 0xfc00 0x10 0x1800>;
                amlogic,pins = "CARD_0", "CARD_1", "CARD_2", "CARD_3", "CARD_4", "CARD_5";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x26>;
                phandle = <0x26>;
            };

            sd_1bit_pins {
                amlogic,setmask = <0x2 0x8c00 0x10 0x1800>;
                amlogic,pins = "CARD_1", "CARD_2", "CARD_3";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x27>;
                phandle = <0x27>;
            };

            sd_clk_cmd_uart_pins {
                amlogic,setmask = <0x2 0xc00 0x8 0x600>;
                amlogic,pins = "CARD_2", "CARD_3";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x28>;
                phandle = <0x28>;
            };

            sd_1bit_uart_pins {
                amlogic,setmask = <0x2 0x8c00 0x8 0x600>;
                amlogic,pins = "CARD_1", "CARD_2", "CARD_3";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x29>;
                phandle = <0x29>;
            };

            sd_to_ao_uart_pins {
                amlogic,setmask = <0x10 0x1800>;
                amlogic,clrmask = <0x8 0x600>;
                amlogic,pins = "GPIOAO_0", "GPIOAO_1";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x2a>;
                phandle = <0x2a>;
            };

            ao_to_sd_uart_pins {
                amlogic,setmask = <0x8 0x600>;
                amlogic,clrmask = <0x10 0x1800 0x2 0x3000>;
                amlogic,pins = "CARD_4", "CARD_5";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x2b>;
                phandle = <0x2b>;
            };

            emmc_clk_cmd_pins {
                amlogic,setmask = <0x4 0xc00c0000>;
                amlogic,pins = "BOOT_8", "BOOT_10";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x2c>;
                phandle = <0x2c>;
            };

            emmc_all_pins {
                amlogic,setmask = <0x4 0xc00c0000>;
                amlogic,pins = "BOOT_0", "BOOT_1", "BOOT_2", "BOOT_3", "BOOT_4", "BOOT_5", "BOOT_6", "BOOT_7", "BOOT_8", "BOOT_10";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x2d>;
                phandle = <0x2d>;
            };

            sdio_clk_cmd_pins {
                amlogic,setmask = <0x8 0x3>;
                amlogic,pins = "GPIOX_4", "GPIOX_5";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x2e>;
                phandle = <0x2e>;
            };

            sdio_all_pins {
                amlogic,setmask = <0x8 0x3f>;
                amlogic,pins = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4", "GPIOX_5";
                amlogic,enable-output = <0x1>;
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x2f>;
                phandle = <0x2f>;
            };

            conf_nand_pulldown {
                amlogic,pins = "BOOT_0", "BOOT_1", "BOOT_2", "BOOT_3", "BOOT_4", "BOOT_5", "BOOT_6", "BOOT_7", "BOOT_15";
                amlogic,pullup = <0x0>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x30>;
                phandle = <0x30>;
            };

            conf_nand_pullup {
                amlogic,pins = "BOOT_8", "BOOT_10";
                amlogic,pullup = <0x1>;
                amlogic,pullupen = <0x1>;
                linux,phandle = <0x31>;
                phandle = <0x31>;
            };

            all_nand_pins {
                amlogic,setmask = <0x4 0x7ff00000>;
                amlogic,clrmask = <0x0 0x80000 0x4 0x800c0000 0x5 0xf>;
                amlogic,pins = "BOOT_0", "BOOT_1", "BOOT_2", "BOOT_3", "BOOT_4", "BOOT_5", "BOOT_6", "BOOT_7", "BOOT_8", "BOOT_9", "BOOT_10", "BOOT_11", "BOOT_12", "BOOT_13", "BOOT_14", "BOOT_15", "BOOT_16", "BOOT_17";
                amlogic,enable-output = <0x1>;
                linux,phandle = <0x32>;
                phandle = <0x32>;
            };

            nand_cs {
                amlogic,setmask = <0x4 0xc000000>;
                amlogic,clrmask = <0x4 0x40000>;
                amlogic,pins = "BOOT_8", "BOOT_9";
                linux,phandle = <0x33>;
                phandle = <0x33>;
            };

            hdmitx_hpd {
                amlogic,setmask = <0x1 0x4000000>;
                amlogic,pins = "GPIOH_0";
                linux,phandle = <0x53>;
                phandle = <0x53>;
            };

            hdmitx_ddc {
                amlogic,setmask = <0x1 0x3000000>;
                amlogic,pins = "GPIOH_1", "GPIOH_2";
                linux,phandle = <0x54>;
                phandle = <0x54>;
            };

            hdmitx_aocec {
                amlogic,setmask = <0x10 0x8000>;
                amlogic,clrmask = <0x10 0x24000 0x11 0x1>;
                amlogic,pins = "GPIOAO_12";
                linux,phandle = <0x56>;
                phandle = <0x56>;
            };

            hdmitx_eecec {
                amlogic,setmask = <0x10 0x4000>;
                amlogic,clrmask = <0x10 0x28000 0x11 0x1>;
                amlogic,pins = "GPIOAO_12";
            };

            a_i2c {
                amlogic,setmask = <0x7 0xc000000>;
                amlogic,clrmask = <0x0 0x18c0 0x2 0x30000000 0x5 0x1800>;
                amlogic,pins = "GPIODV_24", "GPIODV_25";
                linux,phandle = <0x11>;
                phandle = <0x11>;
            };

            b_i2c {
                amlogic,setmask = <0x7 0x3000000>;
                amlogic,clrmask = <0x0 0x600 0x2 0xc000000 0x5 0x700>;
                amlogic,pins = "GPIODV_26", "GPIODV_27";
                linux,phandle = <0x12>;
                phandle = <0x12>;
            };

            c_i2c {
                amlogic,setmask = <0x7 0xc00000>;
                amlogic,clrmask = <0x3 0x700000>;
                amlogic,pins = "GPIODV_28", "GPIODV_29";
                linux,phandle = <0x13>;
                phandle = <0x13>;
            };

            d_i2c {
                amlogic,setmask = <0x4 0xc>;
                amlogic,clrmask = <0x2 0x3000000 0x3 0x1000>;
                amlogic,pins = "GPIOX_16", "GPIOX_17";
                linux,phandle = <0x14>;
                phandle = <0x14>;
            };

            dvb_p_ts0_pins {
                amlogic,setmask = <0x3 0x37>;
                amlogic,clrmask = <0x2 0xf0000 0x1 0x30ff>;
                amlogic,pins = "GPIOY_0", "GPIOY_1", "GPIOY_2", "GPIOY_3", "GPIOY_4", "GPIOY_5", "GPIOY_6", "GPIOY_7", "GPIOY_8", "GPIOY_9", "GPIOY_10";
            };

            dvb_s_ts0_pins {
                amlogic,setmask = <0x3 0x797>;
                amlogic,clrmask = <0x1 0x7 0x2 0xf0000 0x3 0x60060000 0x4 0xc0 0x8 0x800>;
                amlogic,pins = "GPIOY_0", "GPIOY_1", "GPIOY_2", "GPIOY_3";
                linux,phandle = <0x6a>;
                phandle = <0x6a>;
            };

            audio_pin {
                amlogic,setmask = <0x10 0x78000000>;
                amlogic,clrmask = <0x10 0x40000>;
                amlogic,pins = "GPIOAO_8", "GPIOAO_9", "GPIOAO_10", "GPIOAO_11";
                linux,phandle = <0x5a>;
                phandle = <0x5a>;
            };

            audio_pin1 {
                amlogic,setmask = <0x1 0x200>;
                amlogic,clrmask = <0x1 0x10000>;
                amlogic,pins = "GPIOY_12";
                linux,phandle = <0x59>;
                phandle = <0x59>;
            };

            dvb_s_ts1_pins {
                amlogic,setmask = <0x3 0x797>;
                amlogic,clrmask = <0x1 0x7 0x2 0xf0000 0x3 0x60060000 0x4 0xc0 0x8 0x800>;
                amlogic,pins = "GPIOY_0", "GPIOY_1", "GPIOY_2", "GPIOY_3", "GPIOX_6", "GPIOX_7", "GPIOX_8", "GPIOX_9";
                linux,phandle = <0x6b>;
                phandle = <0x6b>;
            };

            smc_pins {
                amlogic,setmask = <0x1 0x3000>;
                amlogic,clrmask = <0x2 0x10000 0x3 0x20>;
                amlogic,pins = "GPIOY_4", "GPIOY_5";
                linux,phandle = <0x6c>;
                phandle = <0x6c>;
            };
        };

        cpu_version {
            reg = <0x0 0xc8100220 0x0 0x4>;
        };

        meson_clk_msr {
            compatible = "amlogic, gxbb_measure";
            reg = <0x0 0xc110875c 0x0 0x4 0x0 0xc1108764 0x0 0x4>;
        };

        i2c@c1108500 {
            compatible = "amlogic, meson-i2c";
            dev_name = "i2c-A";
            status = "okay";
            reg = <0x0 0xc1108500 0x0 0x20>;
            device_id = <0x1>;
            pinctrl-names = "default";
            pinctrl-0 = <0x11>;
            #address-cells = <0x1>;
            #size-cells = <0x0>;
            use_pio = <0x0>;
            master_i2c_speed = <0x493e0>;
            clocks = <0xc 0xa>;
            clock-names = "clk_i2c";
            resets = <0xc 0x9>;
        };

        i2c@c11087c0 {
            compatible = "amlogic, meson-i2c";
            dev_name = "i2c-B";
            status = "okay";
            reg = <0x0 0xc11087c0 0x0 0x20>;
            device_id = <0x2>;
            pinctrl-names = "default";
            pinctrl-0 = <0x12>;
            #address-cells = <0x1>;
            #size-cells = <0x0>;
            use_pio = <0x0>;
            master_i2c_speed = <0x493e0>;
            clocks = <0xc 0xa>;
            clock-names = "clk_i2c";
            resets = <0xc 0x9>;
        };

        i2c@c11087e0 {
            compatible = "amlogic, meson-i2c";
            dev_name = "i2c-C";
            status = "disabled";
            reg = <0x0 0xc11087e0 0x0 0x20>;
            device_id = <0x3>;
            pinctrl-names = "default";
            pinctrl-0 = <0x13>;
            #address-cells = <0x1>;
            #size-cells = <0x0>;
            use_pio = <0x0>;
            master_i2c_speed = <0x493e0>;
            clocks = <0xc 0xa>;
            clock-names = "clk_i2c";
            resets = <0xc 0x9>;
        };

        i2c@c1108d20 {
            compatible = "amlogic, meson-i2c";
            dev_name = "i2c-D";
            status = "disabled";
            reg = <0x0 0xc1108d20 0x0 0x20>;
            device_id = <0x4>;
            pinctrl-names = "default";
            pinctrl-0 = <0x14>;
            #address-cells = <0x1>;
            #size-cells = <0x0>;
            use_pio = <0x0>;
            master_i2c_speed = <0x493e0>;
            clocks = <0xc 0xa>;
            clock-names = "clk_i2c";
            resets = <0xc 0x9>;
        };

        efuse {
            compatible = "amlogic, efuse";
            read_cmd = <0x82000030>;
            write_cmd = <0x82000031>;
            get_max_cmd = <0x82000033>;
            key = <0x15>;
            resets = <0xc 0x3e>;
            reset-names = "efuse_clk";
            status = "okay";
        };

        efusekey {
            keynum = <0x4>;
            key0 = <0x16>;
            key1 = <0x17>;
            key2 = <0x18>;
            key3 = <0x19>;
            linux,phandle = <0x15>;
            phandle = <0x15>;

            key0 {
                keyname = "mac";
                offset = <0x0>;
                size = <0x6>;
                linux,phandle = <0x16>;
                phandle = <0x16>;
            };

            key1 {
                keyname = "mac_bt";
                offset = <0x6>;
                size = <0x6>;
                linux,phandle = <0x17>;
                phandle = <0x17>;
            };

            key2 {
                keyname = "mac_wifi";
                offset = <0xc>;
                size = <0x6>;
                linux,phandle = <0x18>;
                phandle = <0x18>;
            };

            key3 {
                keyname = "usid";
                offset = <0x12>;
                size = <0x10>;
                linux,phandle = <0x19>;
                phandle = <0x19>;
            };
        };

        mhu@c883c400 {
            compatible = "amlogic, meson_mhu";
            reg = <0x0 0xc883c400 0x0 0x4c 0x0 0xc8013000 0x0 0x800>;
            interrupts = <0x0 0xd1 0x8 0x0 0xd2 0x8>;
            #mbox-cells = <0x1>;
            mbox-names = "cpu_to_scp_low", "cpu_to_scp_high";
            mboxes = <0x1a 0x0 0x1a 0x1>;
            linux,phandle = <0x1a>;
            phandle = <0x1a>;
        };

        scpi_clocks {
            compatible = "arm,scpi-clks";

            scpi_clocks@0 {
                compatible = "arm,scpi-clk-indexed";
                #clock-cells = <0x1>;
                clock-indices = <0x0>;
                clock-output-names = "vcpu";
                linux,phandle = <0x10>;
                phandle = <0x10>;
            };
        };

        meson-remote {
            compatible = "amlogic, aml_remote";
            dev_name = "meson-remote";
            status = "disable";
            remote_ao_offset = <0x580>;
            interrupts = <0x0 0xc4 0x1>;
            pinctrl-names = "default";
            pinctrl-0 = <0x1b>;
        };

        encryption_chip {
            compatible = "amlogic,aml_encryption";
            dev_name = "encryption_chip";
            i2c_num = <0x1>;
            status = "okay";
        };

        sen5-remote {
            compatible = "sen5, sen5_remote";
            dev_name = "sen5-remote";
            status = "ok";
            remote_ao_offset = <0x580>;
            interrupts = <0x0 0xc4 0x1>;
            pinctrl-names = "default";
            pinctrl-0 = <0x1b>;
        };

        rng {
            compatible = "amlogic,meson-rng";
            reg = <0x0 0xc8834000 0x0 0x4>;
        };

        audio_data {
            compatible = "amlogic, audio_data";
            query_licence_cmd = <0x82000050>;
            status = "okay";
        };

        saradc {
            compatible = "amlogic, saradc";
            status = "okay";
            interrupts = <0x0 0x9 0x1>;
            interrupt-names = "saradc_int";
            clocks = <0xc 0x2>;
            clock-names = "saradc_clk";
            resets = <0xc 0x56>;
            reg = <0x0 0xc1108680 0x0 0x30 0x0 0xc883c3d8 0x0 0x8>;
        };

        aliases {
            serial0 = "/serial@c81004c0";
            serial1 = "/serial@c11084c0";
            serial3 = "/serial@c1108700";
        };

        gpu_dvfs_tbl {
            sc_mpp = <0x3>;
            tbl = <0x7 0x8 0x9 0xa 0xb>;
            linux,phandle = <0xd>;
            phandle = <0xd>;
        };

        memory@00000000 {
            device_type = "memory";
            linux,usable-memory = <0x0 0x1000000 0x0 0x3f000000>;
        };

        reserved-memory {
            #address-cells = <0x2>;
            #size-cells = <0x2>;
            ranges;

            linux,secmon {
                compatible = "aml_secmon_memory";
                reg = <0x0 0x10000000 0x0 0x200000>;
                no-map;
                linux,phandle = <0xe>;
                phandle = <0xe>;
            };

            linux,secos {
                compatible = "amlogic, secos_memory";
                reg = <0x0 0x5300000 0x0 0x2000000>;
                no-map;
                linux,phandle = <0xf>;
                phandle = <0xf>;
            };

            aml_pstore {
                compatible = "amlogic, pstore";
                reg = <0x0 0x20000000 0x0 0x100000>;
                no-map;
            };

            linux,meson-fb {
                compatible = "amlogic, fb-memory";
                size = <0x0 0x2000000>;
                no-map;
                linux,phandle = <0x1c>;
                phandle = <0x1c>;
            };

            linux,di {
                compatible = "amlogic, di-mem";
                size = <0x0 0x1e00000>;
                multi-use;
                linux,phandle = <0x23>;
                phandle = <0x23>;
            };

            linux,ion-dev {
                compatible = "amlogic, idev-mem";
                size = <0x0 0x2000000>;
                multi-use;
                linux,phandle = <0x21>;
                phandle = <0x21>;
            };

            linux,codec_mm_cma {
                compatible = "shared-dma-pool";
                reusable;
                size = <0x0 0xf800000>;
                alignment = <0x0 0x400000>;
                linux,contiguous-region;
                linux,phandle = <0x1d>;
                phandle = <0x1d>;
            };

            linux,picdec {
                compatible = "shared-dma-pool";
                reusable;
                size = <0x0 0x3000000>;
                alignment = <0x0 0x400000>;
                linux,contiguous-region;
                linux,phandle = <0x22>;
                phandle = <0x22>;
            };

            linux,codec_mm_reserved {
                compatible = "amlogic, codec-mm-reserved";
                size = <0x0 0x4100000>;
                alignment = <0x0 0x100000>;
                linux,phandle = <0x1e>;
                phandle = <0x1e>;
            };
        };

        meson-vout {
            compatible = "amlogic, meson-vout";
            dev_name = "meson-vout";
            status = "okay";
        };

        meson-fb {
            compatible = "amlogic, meson-fb";
            memory-region = <0x1c>;
            dev_name = "meson-fb";
            status = "okay";
            interrupts = <0x0 0x3 0x1 0x0 0x59 0x1>;
            interrupt-names = "viu-vsync", "rdma";
            mem_size = <0x1800000 0x100000>;
            vmode = <0x3>;
            scale_mode = <0x1>;
            display_size_default = <0x780 0x438 0x780 0xca8 0x20>;
        };

        ge2d {
            compatible = "amlogic, ge2d";
            dev_name = "ge2d";
            status = "okay";
            interrupts = <0x0 0x96 0x1>;
            interrupt-names = "ge2d";
            clocks = <0xc 0x17 0xc 0x19>;
            clock-names = "clk_vapb_0", "clk_ge2d";
            resets = <0xc 0x34>;
            reset-names = "ge2d";
        };

        codec_io {
            compatible = "amlogic, codec_io";
            #address-cells = <0x2>;
            #size-cells = <0x2>;
            ranges;

            io_cbus_base {
                reg = <0x0 0xc1100000 0x0 0x100000>;
            };

            io_dos_base {
                reg = <0x0 0xc8820000 0x0 0x10000>;
            };

            io_hiubus_base {
                reg = <0x0 0xc883c000 0x0 0x2000>;
            };

            io_aobus_base {
                reg = <0x0 0xc8100000 0x0 0x100000>;
            };

            io_vcbus_base {
                reg = <0x0 0xd0100000 0x0 0x40000>;
            };

            io_dmc_base {
                reg = <0x0 0xc8838000 0x0 0x400>;
            };
        };

        codec_mm {
            compatible = "amlogic, codec, mm";
            memory-region = <0x1d 0x1e>;
            dev_name = "codec_mm";
            status = "okay";
        };

        ethernet@0xc9410000 {
            compatible = "amlogic, gxbb-rmii-dwmac";
            reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x8>;
            interrupts = <0x0 0x8 0x1>;
            phy-mode = "rmii";
            pinctrl-names = "eth_pins";
            pinctrl-0 = <0x1f>;
            rst_pin-gpios = <0x20 0xe 0x0>;
            mc_val = <0x1800>;
            resets = <0xc 0x23>;
            reset-names = "ethpower";
            interrupt-names = "macirq";
            clocks = <0xc 0xa>;
            clock-names = "ethclk81";
        };

        mesonstream {
            compatible = "amlogic, codec, streambuf";
            dev_name = "mesonstream";
            status = "okay";
            resets = <0xc 0x39 0xc 0x59 0xc 0x24 0xc 0x1>;
            reset-names = "parser_top", "vpu_intr", "demux", "vdec";
        };

        amvideocap {
            compatible = "amlogic, amvideocap";
            dev_name = "amvideocap.0";
            status = "okay";
        };

        ion_dev {
            compatible = "amlogic, ion_dev";
            memory-region = <0x21>;
        };

        vdec {
            compatible = "amlogic, vdec";
            dev_name = "vdec.0";
            status = "okay";
            interrupts = <0x0 0x3 0x1 0x0 0x17 0x1 0x0 0x20 0x1 0x0 0x2b 0x1 0x0 0x2c 0x1 0x0 0x2d 0x1>;
            interrupt-names = "vsync", "demux", "parser", "mailbox_0", "mailbox_1", "mailbox_2";
        };

        picdec {
            compatible = "amlogic, picdec";
            memory-region = <0x22>;
            dev_name = "picdec";
            status = "okay";
        };

        ppmgr {
            compatible = "amlogic, ppmgr";
            memory-region = <0x21>;
            dev_name = "ppmgr";
            status = "okay";
        };

        deinterlace {
            compatible = "amlogic, deinterlace";
            status = "okay";
            memory-region = <0x23>;
            interrupts = <0x0 0x2e 0x1 0x0 0x6 0x1>;
            interrupt-names = "de_irq", "timerc";
            buffer-size = <0x2fd000>;
            hw-version = <0x2>;
        };

        amvdec_656in0 {
            compatible = "amlogic, amvdec_656in";
            dev_name = "amvdec_656in0";
            status = "ok";
            reg = <0x0 0xd0048000 0x0 0x7c>;
            clocks = <0xc 0x7 0xc 0x26>;
            clock-names = "fclk_div2", "cts_bt656_clk0";
            bt656_id = <0x0>;
        };

        amvdec_656in1 {
            compatible = "amlogic, amvdec_656in";
            dev_name = "amvdec_656in1";
            status = "ok";
            reg = <0x0 0xd0050000 0x0 0x7c>;
            clocks = <0xc 0x7 0xc 0x27>;
            clock-names = "fclk_div2", "cts_bt656_clk1";
            bt656_id = <0x1>;
        };

        amvenc_avc {
            compatible = "amlogic, amvenc_avc";
            dev_name = "amvenc_avc";
            status = "okay";
            interrupts = <0x0 0x2d 0x1>;
            interrupt-names = "mailbox_2";
        };

        vpu {
            compatible = "amlogic, vpu";
            dev_name = "vpu";
            status = "ok";
            clk_level = <0x7>;
        };

        bt-dev {
            compatible = "amlogic, bt-dev";
            dev_name = "bt-dev";
            status = "ok";
            gpio_reset = <0x20 0x70 0x0>;
        };

        rtc {
            compatible = "amlogic, aml_vrtc";
            alarm_reg_addr = <0xc81000a8>;
            timer_e_addr = <0xc1109988>;
            init_date = "2015/01/01";
            status = "okay";
        };

        wifi {
            compatible = "amlogic, aml_broadcm_wifi";
            dev_name = "aml_broadcm_wifi";
            status = "okay";
            interrupt_pin = <0x20 0x66 0x0>;
            interrupts = <0x0 0x44 0x4>;
            irq_trigger_type = "GPIO_IRQ_LOW";
            power_on_pin = <0x20 0x67 0x0>;
            dhd_static_buf;
            pinctrl-names = "wifi_32k_pins";
            pinctrl-0 = <0x24>;
        };

        wifi_power {
            compatible = "amlogic, wifi_power";
            dev_name = "wifi_power";
            status = "okay";
            power_gpio = <0x20 0x67 0x0>;
        };

        sd {
            compatible = "amlogic, aml_sd_emmc";
            dev_name = "aml_newsd.0";
            status = "okay";
            reg = <0x0 0xd0072000 0x0 0x2000>;
            interrupts = <0x0 0xd9 0x1 0x0 0x43 0x1 0x0 0x45 0x1>;
            pinctrl-names = "sd_clk_cmd_pins", "sd_all_pins", "sd_1bit_pins", "sd_clk_cmd_uart_pins", "sd_1bit_uart_pins", "sd_to_ao_uart_pins", "ao_to_sd_uart_pins";
            pinctrl-0 = <0x25>;
            pinctrl-1 = <0x26>;
            pinctrl-2 = <0x27>;
            pinctrl-3 = <0x28>;
            pinctrl-4 = <0x29>;
            pinctrl-5 = <0x2a>;
            pinctrl-6 = <0x2b>;

            sd {
                status = "okay";
                port = <0x1>;
                pinname = "sd";
                ocr_avail = <0x200080>;
                caps = "MMC_CAP_4_BIT_DATA", "MMC_CAP_MMC_HIGHSPEED", "MMC_CAP_SD_HIGHSPEED";
                f_min = <0x61a80>;
                f_max = <0x17d7840>;
                max_req_size = <0x20000>;
                gpio_dat3 = <0x20 0x2a 0x0>;
                jtag_pin = <0x20 0x26 0x0>;
                gpio_cd = <0x20 0x2c 0x0>;
                irq_in = <0x3>;
                irq_out = <0x5>;
                card_type = <0x5>;
            };
        };

        emmc {
            compatible = "amlogic, aml_sd_emmc";
            dev_name = "aml_newsd.0";
            status = "okay";
            reg = <0x0 0xd0074000 0x0 0x2000>;
            interrupts = <0x0 0xda 0x1>;
            pinctrl-names = "emmc_clk_cmd_pins", "emmc_all_pins";
            pinctrl-0 = <0x2c>;
            pinctrl-1 = <0x2d>;

            emmc {
                status = "okay";
                pinname = "emmc";
                ocr_avail = <0x200080>;
                caps = "MMC_CAP_8_BIT_DATA", "MMC_CAP_MMC_HIGHSPEED", "MMC_CAP_SD_HIGHSPEED", "MMC_CAP_NONREMOVABLE", "MMC_CAP_1_8V_DDR", "MMC_CAP_HW_RESET", "MMC_CAP_ERASE", "MMC_CAP_CMD23";
                caps2 = "MMC_CAP2_HS200";
                f_min = <0x493e0>;
                f_max = <0x9e4f580>;
                max_req_size = <0x20000>;
                gpio_dat3 = <0x20 0x17 0x0>;
                hw_reset = <0x20 0x1d 0x0>;
                card_type = <0x1>;
            };
        };

        sdio {
            compatible = "amlogic, aml_sd_emmc";
            dev_name = "aml_newsd.0";
            status = "okay";
            reg = <0x0 0xd0070000 0x0 0x2000>;
            interrupts = <0x0 0xd8 0x4>;
            pinctrl-names = "sdio_clk_cmd_pins", "sdio_all_pins";
            pinctrl-0 = <0x2e>;
            pinctrl-1 = <0x2f>;

            sdio {
                status = "okay";
                pinname = "sdio";
                ocr_avail = <0x200080>;
                caps = "MMC_CAP_4_BIT_DATA", "MMC_CAP_MMC_HIGHSPEED", "MMC_CAP_SD_HIGHSPEED", "MMC_CAP_NONREMOVABLE", "MMC_CAP_UHS_SDR12", "MMC_CAP_UHS_SDR25", "MMC_CAP_UHS_SDR50", "MMC_CAP_UHS_SDR104", "MMC_PM_KEEP_POWER", "MMC_CAP_SDIO_IRQ";
                f_min = <0x61a80>;
                f_max = <0xbebc200>;
                max_req_size = <0x20000>;
                card_type = <0x3>;
            };
        };

        nand {
            compatible = "amlogic, aml_nand";
            dev_name = "nand";
            status = "ok";
            reg = <0x0 0xd0074800 0x0 0x200>;
            interrupts = <0x0 0x22 0x1>;
            pinctrl-names = "nand_rb_mod", "nand_norb_mod", "nand_cs_pins_only";
            pinctrl-0 = <0x30 0x31 0x32>;
            pinctrl-1 = <0x30 0x31 0x32>;
            pinctrl-2 = <0x33>;
            device_id = <0x0>;
            plat-names = "nandnormal";
            plat-num = <0x1>;
            plat-part-0 = <0x34>;

            normal {
                enable_pad = "ce0", "ce1", "ce2", "ce3";
                busy_pad = "rb0";
                linux,phandle = <0x34>;
                phandle = <0x34>;
            };
        };

        aml_nftl {
            compatible = "amlogic, nftl";
        };

        partitions {
            parts = <0xc>;
            part-0 = <0x35>;
            part-1 = <0x36>;
            part-2 = <0x37>;
            part-3 = <0x38>;
            part-4 = <0x39>;
            part-5 = <0x3a>;
            part-6 = <0x3b>;
            part-7 = <0x3c>;
            part-8 = <0x3d>;
            part-9 = <0x3e>;
            part-10 = <0x3f>;
            part-11 = <0x40>;

            logo {
                pname = "logo";
                size = <0x0 0x2000000>;
                mask = <0x1>;
                linux,phandle = <0x35>;
                phandle = <0x35>;
            };

            recovery {
                pname = "recovery";
                size = <0x0 0x2000000>;
                mask = <0x1>;
                linux,phandle = <0x36>;
                phandle = <0x36>;
            };

            rsv {
                pname = "rsv";
                size = <0x0 0x800000>;
                mask = <0x1>;
                linux,phandle = <0x37>;
                phandle = <0x37>;
            };

            tee {
                pname = "tee";
                size = <0x0 0x800000>;
                mask = <0x1>;
                linux,phandle = <0x38>;
                phandle = <0x38>;
            };

            crypt {
                pname = "crypt";
                size = <0x0 0x2000000>;
                mask = <0x1>;
                linux,phandle = <0x39>;
                phandle = <0x39>;
            };

            misc {
                pname = "misc";
                size = <0x0 0x2000000>;
                mask = <0x1>;
                linux,phandle = <0x3a>;
                phandle = <0x3a>;
            };

            instaboot {
                pname = "instaboot";
                size = <0x0 0x20000000>;
                mask = <0x1>;
                linux,phandle = <0x3b>;
                phandle = <0x3b>;
            };

            boot {
                pname = "boot";
                size = <0x0 0x2000000>;
                mask = <0x1>;
                linux,phandle = <0x3c>;
                phandle = <0x3c>;
            };

            system {
                pname = "system";
                size = <0x0 0x40000000>;
                mask = <0x1>;
                linux,phandle = <0x3d>;
                phandle = <0x3d>;
            };

            cache {
                pname = "cache";
                size = <0x0 0x40000000>;
                mask = <0x2>;
                linux,phandle = <0x3e>;
                phandle = <0x3e>;
            };

            nv {
                pname = "nv";
                size = <0x0 0x1000000>;
                mask = <0x1>;
                linux,phandle = <0x3f>;
                phandle = <0x3f>;
            };

            data {
                pname = "data";
                size = <0xffffffff 0xffffffff>;
                mask = <0x4>;
                linux,phandle = <0x40>;
                phandle = <0x40>;
            };
        };

        unifykey {
            compatible = "amlogic, unifykey";
            status = "ok";
            unifykey-num = <0x12>;
            unifykey-index-0 = <0x41>;
            unifykey-index-1 = <0x42>;
            unifykey-index-2 = <0x43>;
            unifykey-index-3 = <0x44>;
            unifykey-index-4 = <0x45>;
            unifykey-index-5 = <0x46>;
            unifykey-index-6 = <0x47>;
            unifykey-index-7 = <0x48>;
            unifykey-index-8 = <0x49>;
            unifykey-index-9 = <0x4a>;
            unifykey-index-10 = <0x4b>;
            unifykey-index-11 = <0x4c>;
            unifykey-index-12 = <0x4d>;
            unifykey-index-13 = <0x4e>;
            unifykey-index-14 = <0x4f>;
            unifykey-index-15 = <0x50>;
            unifykey-index-16 = <0x51>;
            unifykey-index-17 = <0x52>;

            key_0 {
                key-name = "usid";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x41>;
                phandle = <0x41>;
            };

            key_1 {
                key-name = "mac";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x42>;
                phandle = <0x42>;
            };

            key_2 {
                key-name = "hdcp";
                key-device = "normal";
                key-type = "sha1";
                key-permit = "read", "write", "del";
                linux,phandle = <0x43>;
                phandle = <0x43>;
            };

            key_3 {
                key-name = "secure_boot_set";
                key-device = "efuse";
                key-permit = "write";
                linux,phandle = <0x44>;
                phandle = <0x44>;
            };

            key_4 {
                key-name = "mac_bt";
                key-device = "normal";
                key-permit = "read", "write", "del";
                key-type = "mac";
                linux,phandle = <0x45>;
                phandle = <0x45>;
            };

            key_5 {
                key-name = "mac_wifi";
                key-device = "normal";
                key-permit = "read", "write", "del";
                key-type = "mac";
                linux,phandle = <0x46>;
                phandle = <0x46>;
            };

            key_6 {
                key-name = "hdcp2_tx";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x47>;
                phandle = <0x47>;
            };

            key_7 {
                key-name = "hdcp2_rx";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x48>;
                phandle = <0x48>;
            };

            key_8 {
                key-name = "widevinekeybox";
                key-device = "secure";
                key-type = "sha1";
                key-permit = "read", "write", "del";
                linux,phandle = <0x49>;
                phandle = <0x49>;
            };

            key_9 {
                key-name = "deviceid";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x4a>;
                phandle = <0x4a>;
            };

            key_10 {
                key-name = "hdcp22_fw_private";
                key-device = "secure";
                key-permit = "read", "write", "del";
                linux,phandle = <0x4b>;
                phandle = <0x4b>;
            };

            key_11 {
                key-name = "UUID";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x4c>;
                phandle = <0x4c>;
            };

            key_12 {
                key-name = "SERIALNO";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x4d>;
                phandle = <0x4d>;
            };

            key_13 {
                key-name = "OrderId";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x4e>;
                phandle = <0x4e>;
            };

            key_14 {
                key-name = "DID";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x4f>;
                phandle = <0x4f>;
            };

            key_15 {
                key-name = "OTP";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x50>;
                phandle = <0x50>;
            };

            key_16 {
                key-name = "hdcp2lc128";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x51>;
                phandle = <0x51>;
            };

            key_17 {
                key-name = "hdcp2key";
                key-device = "normal";
                key-permit = "read", "write", "del";
                linux,phandle = <0x52>;
                phandle = <0x52>;
            };
        };

        amhdmitx {
            compatible = "amlogic, amhdmitx";
            dev_name = "amhdmitx";
            status = "okay";
            pinctrl-names = "hdmitx_hpd", "hdmitx_ddc";
            pinctrl-0 = <0x53>;
            pinctrl-1 = <0x54>;
            vend-data = <0x55>;
            interrupts = <0x0 0x39 0x1>;
            interrupt-names = "hdmitx_hpd";
            clocks = <0xc 0xb 0xc 0xc 0xc 0xd 0xc 0xe 0xc 0xf 0xc 0x16>;
            clock-names = "hdmitx_clk_sys", "hdmitx_clk_encp", "hdmitx_clk_enci", "hdmitx_clk_pixel", "hdmitx_clk_phy", "hdmitx_clk_vid";
            hdcp14_en = <0x82000010>;
            hdcp14_rslt = <0x82000011>;
            gpio_i2c_en = <0x1>;
            #address-cells = <0x2>;
            #size-cells = <0x2>;
            ranges;

            vend_data {
                compatible = "amlogic, amlogic-cec";
                status = "okay";
                vendor_name = "Amlogic";
                vendor_id = <0x0>;
                product_desc = "GXBB Mbox";
                cec_osd_string = "MBox";
                interrupts = <0x0 0xc7 0x1>;
                interrupt-names = "hdmitx_cec";
                pinctrl-names = "hdmitx_aocec";
                pinctrl-0 = <0x56>;
                reg = <0x0 0xc810023c 0x0 0x4>;
                linux,phandle = <0x55>;
                phandle = <0x55>;
            };
        };

        i2c_gpio {
            compatible = "i2c-gpio";
            dev_name = "i2c-gpio";
            i2c-gpio,delay-us = <0xa>;
            gpios = <0x20 0x11 0x0 0x20 0x12 0x0>;
            #address-cells = <0x2>;
            #size-cells = <0x2>;

            i2c_gpio_edid {
                compatible = "i2c-gpio-edid";
                reg = <0x50 0x0 0x0 0x0>;
            };
        };

        serial@c81004c0 {
            compatible = "amlogic, meson-uart";
            reg = <0x0 0xc81004c0 0x0 0x14>;
            interrupts = <0x0 0xc1 0x1>;
            status = "okay";
            clocks = <0xc 0x2>;
            clock-names = "clk_uart";
            fifosize = <0x40>;
            pinctrl-names = "default";
        };

        serial@c11084c0 {
            compatible = "amlogic, meson-uart";
            reg = <0x0 0xc11084c0 0x0 0x14>;
            interrupts = <0x0 0x1a 0x1>;
            status = "okay";
            clocks = <0xc 0x2>;
            clock-names = "clk_uart";
            fifosize = <0x80>;
            pinctrl-names = "default";
            pinctrl-0 = <0x57>;
            resets = <0xc 0xd>;
        };

        serial@c1108700 {
            compatible = "amlogic, meson-uart";
            reg = <0x0 0xc1108700 0x0 0x14>;
            interrupts = <0x0 0x5d 0x1>;
            status = "okay";
            clocks = <0xc 0x2>;
            clock-names = "clk_uart";
            fifosize = <0x40>;
            pinctrl-names = "default";
            pinctrl-0 = <0x58>;
            resets = <0xc 0x4f>;
        };

        canvas {
            compatible = "amlogic, meson, canvas";
            dev_name = "amlogic-canvas";
            status = "ok";
            reg = <0x0 0xc8838000 0x0 0x400>;
        };

        rdma {
            compatible = "amlogic, meson, rdma";
            dev_name = "amlogic-rdma";
            status = "ok";
            interrupts = <0x0 0x59 0x1>;
            interrupt-names = "rdma";
        };

        dwc2_b {
            compatible = "amlogic,dwc2";
            device_name = "dwc2_b";
            reg = <0x0 0xc9100000 0x0 0x40000>;
            interrupts = <0x0 0x1f 0x4>;
            status = "okay";
            pl-periph-id = <0x1>;
            clock-src = "usb1";
            port-id = <0x1>;
            port-type = <0x1>;
            port-speed = <0x0>;
            port-config = <0x0>;
            port-dma = <0x0>;
            port-id-mode = <0x1>;
            phy-reg = <0xc0000020>;
            phy-reg-size = <0x20>;
            usb-fifo = <0x400>;
            host-only-core = <0x1>;
            pmu-apply-power = <0x1>;
            cpu-type = "gxbaby";
            resets = <0xc 0x3a 0xc 0x48 0xc 0x36>;
            reset-names = "usb_general", "usb1", "usb1_to_ddr";
        };

        dwc2_a {
            compatible = "amlogic,dwc2";
            device_name = "dwc2_a";
            reg = <0x0 0xc9000000 0x0 0x40000>;
            interrupts = <0x0 0x1e 0x4>;
            status = "okay";
            pl-periph-id = <0x0>;
            clock-src = "usb0";
            port-id = <0x0>;
            port-type = <0x1>;
            port-speed = <0x0>;
            port-config = <0x0>;
            port-dma = <0x0>;
            port-id-mode = <0x1>;
            gpio-work-mask = <0x1>;
            phy-reg = <0xc0000000>;
            phy-reg-size = <0x20>;
            usb-fifo = <0x400>;
            cpu-type = "gxbaby";
            resets = <0xc 0x3a 0xc 0x49 0xc 0x35>;
            reset-names = "usb_general", "usb0", "usb0_to_ddr";
        };

        I2S {
            #sound-dai-cells = <0x0>;
            resets = <0xc 0x26 0xc 0x12 0xc 0x28 0xc 0x29 0xc 0x2a 0xc 0x2b 0xc 0x2c 0xc 0x2d 0xc 0x2f 0xc 0x8e 0xc 0x22>;
            reset-names = "top_glue", "aud_buf", "i2s_out", "amclk_measure", "aififo2", "aud_mixer", "mixer_reg", "adc", "top_level", "aoclk", "aud_in";
            clocks = <0xc 0x1f 0xc 0x22>;
            clock-names = "mpll0", "mclk";
            compatible = "amlogic, aml-i2s-dai";
            linux,phandle = <0x63>;
            phandle = <0x63>;
        };

        SPDIF {
            #sound-dai-cells = <0x0>;
            compatible = "amlogic, aml-spdif-dai";
            resets = <0xc 0x27 0xc 0x90>;
            reset-names = "iec958", "iec958_amclk";
            clocks = <0xc 0x20 0xc 0x24 0xc 0x22 0xc 0x25>;
            clock-names = "mpll1", "i958", "mclk", "spdif";
            linux,phandle = <0x64>;
            phandle = <0x64>;
        };

        PCM {
            #sound-dai-cells = <0x0>;
            compatible = "amlogic, aml-pcm-dai";
            linux,phandle = <0x65>;
            phandle = <0x65>;
        };

        i2s_platform {
            compatible = "amlogic, aml-i2s";
            linux,phandle = <0x61>;
            phandle = <0x61>;
        };

        pcm_platform {
            compatible = "amlogic, aml-pcm";
            linux,phandle = <0x62>;
            phandle = <0x62>;
        };

        spdif_codec {
            #sound-dai-cells = <0x0>;
            compatible = "amlogic, aml-spdif-codec";
            pinctrl-names = "aml_audio_spdif";
            pinctrl-0 = <0x59>;
            linux,phandle = <0x67>;
            phandle = <0x67>;
        };

        pcm_codec {
            #sound-dai-cells = <0x0>;
            compatible = "amlogic, pcm2BT-codec";
            linux,phandle = <0x68>;
            phandle = <0x68>;
        };

        dummy {
            #sound-dai-cells = <0x0>;
            compatible = "amlogic, aml_dummy_codec";
            status = "okay";
            linux,phandle = <0x66>;
            phandle = <0x66>;
        };

        aml_m8_snd {
            compatible = "aml, aml_snd_m8";
            status = "okay";
            aml-sound-card,format = "i2s";
            aml_sound_card,name = "AML-M8AUDIO";
            aml,audio-routing = "Ext Spk", "LOUTL", "Ext Spk", "LOUTR";
            mute_gpio-gpios = <0x20 0x13 0x0>;
            hp_disable;
            hp_paraments = <0x320 0x12c 0x0 0x5 0x1>;
            pinctrl-names = "aml_snd_m8";
            pinctrl-0 = <0x5a>;
            cpu_list = <0x5b 0x5c 0x5d>;
            codec_list = <0x5e 0x5f 0x60>;
            plat_list = <0x61 0x61 0x62>;

            cpudai0 {
                sound-dai = <0x63>;
                linux,phandle = <0x5b>;
                phandle = <0x5b>;
            };

            cpudai1 {
                sound-dai = <0x64>;
                linux,phandle = <0x5c>;
                phandle = <0x5c>;
            };

            cpudai2 {
                sound-dai = <0x65>;
                linux,phandle = <0x5d>;
                phandle = <0x5d>;
            };

            codec0 {
                sound-dai = <0x66>;
                linux,phandle = <0x5e>;
                phandle = <0x5e>;
            };

            codec1 {
                sound-dai = <0x67>;
                linux,phandle = <0x5f>;
                phandle = <0x5f>;
            };

            codec2 {
                sound-dai = <0x68>;
                linux,phandle = <0x60>;
                phandle = <0x60>;
            };
        };

        amlogic_thermals {
            compatible = "amlogic, amlogic-thermal";
            #thermal-cells = <0x7>;
            device_name = "thermal";
            trip_point = <0x46 0x177001 0x177001 0x1ff 0x1ff 0x3 0x2 0x50 0x13c681 0x13c681 0x1b3 0x1b3 0x2 0x1 0x5a 0xfbf41 0xfbf41 0x148 0x148 0x2 0x1 0x104 0xffffffff 0xffffffff 0xffffffff 0xffffffff 0xffffffff 0xffffffff>;
            cpu_cali_a = <0x0>;
            idle_interval = <0x3e8>;
            keep_mode;
            keep_mode_threshold = <0x55>;
            keep_mode_max_range = <0x1ec300 0x29a 0x4 0x3>;
            keep_mode_min_range = <0x1f4 0x190 0x1 0x2>;
        };

        gpio_keypad {
            compatible = "amlogic, gpio_keypad";
            status = "okay";
            scan_period = <0x14>;
            key_num = <0x1>;
            key_name = "power";
            key_code = <0x1f4>;
            key_pin = <0x69 0x3 0x0>;
            irq_keyup = <0x6>;
            irq_keydown = <0x7>;
        };

        adc_keypad {
            compatible = "amlogic, adc_keypad";
            status = "okay";
            key_name = "menu", "vol-", "vol+", "esc", "home";
            key_num = <0x5>;
            key_code = <0x8b 0x72 0x73 0x1 0x66>;
            key_chan = <0x0 0x0 0x0 0x0 0x0>;
            key_val = <0x0 0x8f 0x10f 0x189 0x1fe>;
            key_tolerance = <0x28 0x28 0x28 0x28 0x28>;
        };

        sen5led {
            compatible = "sen5,sen5led";
            dev_name = "sen5led";
            status = "okay";
            power_led_gpio = <0x20 0xc 0x0>;
            power_led2_gpio = <0x20 0x7 0x0>;
            bluetooth_led_gpio = <0x20 0x55 0x0>;
        };

        meson-irblaster {
            compatible = "amlogic, am_irblaster";
            dev_name = "meson-irblaster";
            status = "ok";
        };

        fd650 {
            compatible = "sen5,sen5_fd650";
            dev_name = "fd650";
            sck_gpio = <0x20 0xd 0x0>;
            sda_gpio = <0x20 0x6 0x0>;
            status = "okay";
        };

        dvb {
            compatible = "amlogic, dvb";
            dev_name = "dvb";
            ts0 = "serial";
            ts0_control = <0x0>;
            ts0_invert = <0x0>;
            ts1 = "serial";
            ts1_control = <0x0>;
            ts1_invert = <0x0>;
            pinctrl-names = "s_ts0", "s_ts1";
            pinctrl-0 = <0x6a>;
            pinctrl-1 = <0x6b>;
            resets = <0xc 0x24 0xc 0x10 0xc 0x3d 0xc 0x39>;
            reset-names = "demux", "asyncfifo", "ahbarb0", "uparsertop";
        };

        dvbfe {
            compatible = "amlogic, dvbfe";
            dev_name = "dvbfe";
            dtv_demod0 = "Avl6762";
            dtv_demod0_i2c_adap_id = <0x1>;
            dtv_demod0_i2c_addr = <0xc0>;
            dtv_demod0_reset_value = <0x0>;
            dtv_demod0_reset_gpio-gpios = <0x69 0x5 0x0>;
            dtv_demod0_tunerpower_on_value = <0x1>;
            dtv_demod0_tunerpower-gpios = <0x20 0x52 0x0>;
            dtv_demod0_ant_poweron_value = <0x0>;
            dtv_demod0_ant_power-gpios = <0x20 0x53 0x0>;
            fe0_dtv_demod = <0x0>;
            fe0_ts = <0x1>;
            fe0_dev = <0x0>;
            dtv_demod1 = "Avl6211";
            dtv_demod1_i2c_adap_id = <0x1>;
            dtv_demod1_i2c_addr = <0xc>;
            dtv_demod1_reset_value = <0x0>;
            dtv_demod1_reset_gpio-gpios = <0x69 0x5 0x0>;
            dtv_demod1_tunerpower_on_value = <0x1>;
            dtv_demod1_tunerpower-gpios = <0x20 0x52 0x0>;
            dtv_demod1_lnb_poweron_value = <0x1>;
            dtv_demod1_lnb_hz_value = <0x0>;
            dtv_demod1_spectrum_invert = <0x1>;
            fe1_dtv_demod = <0x1>;
            fe1_ts = <0x0>;
            fe1_dev = <0x1>;
        };

        smartcard {
            compatible = "amlogic,smartcard";
            irq_trigger_type = "GPIO_IRQ_LOW";
            smc0_reset_pin-gpios = <0x20 0x5b 0x0>;
            smc0_detect_pin-gpios = <0x20 0x5a 0x0>;
            smc0_enable_pin-gpios = <0x20 0x51 0x0>;
            interrupts = <0x0 0x45 0x4>;
            smc0_clock_source = <0x0>;
            smc0_irq = <0x45>;
            smc0_det_invert = <0x1>;
            smc0_enable_level = <0x1>;
            smc0_need_enable_pin = "yes";
            smc0_reset_level = <0x0>;
            smc0_clk_pinmux_reg = <0x2d>;
            smc0_clk_pinmux_bit = <0x2000>;
            smc0_clk_oen_reg = <0xf>;
            smc0_clk_out_reg = <0x10>;
            smc0_clk_bit = <0x10>;
            pinctrl-names = "default";
            pinctrl-0 = <0x6c>;
            resets = <0xc 0xb>;
            reset-names = "smartcard";
            status = "okay";
        };
    };
     

     

    P.s.

    sorry for my English and if I made some mistake.

×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines