Jump to content

krachlatte

Members
  • Posts

    81
  • Joined

  • Last visited

Everything posted by krachlatte

  1. Hi guys, are ther any plans to upgrade u-boot to 2019.10 from u-boot v2019.04, because libreelec is allready using this and they have a working device tree for the H6 beelink device many thanks
  2. orangepi 3 ./regtool h6-soc-bin SoC bin: slow chip (bin=1) (raw=1) beelink gs1 LibreELEC:~ # ./regtool h6-soc-bin SoC bin: slow chip (bin=1) (raw=1)
  3. [ 4930.512612] Internal error: SP/PC alignment exception: 8a000000 [#1] SMP [ 4930.519320] Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge nls_utf8 cifs fscache libarc4 aufs overlay bnep zstd zram fuse snd_soc_hdmi_codec snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore btsdio bluetooth brcmfmac brcmutil ch341 usbserial uas cfg80211 rfkill dw_hdmi_cec dw_hdmi_i2s_audio panfrost gpu_sched cpufreq_dt realtek i2c_mv64xxx dwmac_sun8i mdio_mux [ 4930.566124] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc6-sunxi64 #5.96.190908 [ 4930.573854] Hardware name: OrangePi 3 (DT) [ 4930.577944] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 4930.582731] pc : 0x7fffffffffffffff [ 4930.586220] lr : __hrtimer_run_queues+0x170/0x210 [ 4930.590915] sp : ffff000010003e50 [ 4930.594224] x29: ffff000010003e50 x28: ffff8000730d5500 [ 4930.599528] x27: ffff800077b80d40 x26: 0000000000000060 [ 4930.604830] x25: 0000000000000080 x24: 15c26873e65a79bb [ 4930.610134] x23: 0000000000000001 x22: 0000000000000000 [ 4930.615438] x21: 0000000000000001 x20: ffff800077b80d00 [ 4930.620732] x19: ffff800077b80d80 x18: 0000000000000000 [ 4930.626035] x17: 0000000000000000 x16: 0000000000000000 [ 4930.631339] x15: 0000000000000000 x14: 0000000000000000 [ 4930.636643] x13: 0000000000000001 x12: 0000000000034079 [ 4930.641946] x11: 0000000000000000 x10: 0000000000000040 [ 4930.647250] x9 : ffff000010e62b38 x8 : ffff000010e62b30 [ 4930.652554] x7 : ffff000010e32980 x6 : ffff800077b80d00 [ 4930.657857] x5 : ffff00001222b850 x4 : 0000047bf68e2800 [ 4930.663152] x3 : ffff00001222b850 x2 : 0000047bf68e2800 [ 4930.668456] x1 : 0000000000000006 x0 : 0000000000000004 [ 4930.673760] Call trace: [ 4930.676203] 0x7fffffffffffffff [ 4930.679340] hrtimer_interrupt+0xf8/0x2d0 [ 4930.683347] arch_timer_handler_phys+0x28/0x40 [ 4930.687785] handle_percpu_devid_irq+0x80/0x140 [ 4930.692311] generic_handle_irq+0x24/0x38 [ 4930.696315] __handle_domain_irq+0x5c/0xb0 [ 4930.700406] gic_handle_irq+0x58/0xa8 [ 4930.704062] el1_irq+0xb8/0x140 [ 4930.707198] arch_cpu_idle+0x10/0x18 [ 4930.710769] do_idle+0x1e0/0x2c0 [ 4930.713992] cpu_startup_entry+0x20/0x28 [ 4930.717910] rest_init+0xb4/0xc0 [ 4930.721133] arch_call_rest_init+0xc/0x14 [ 4930.725136] start_kernel+0x44c/0x478 [ 4930.728797] Code: bad PC value [ 4930.731847] ---[ end trace c5dcc02a219943cf ]--- [ 4930.736458] Kernel panic - not syncing: Fatal exception in interrupt [ 4930.742804] SMP: stopping secondary CPUs [ 4930.746722] Kernel Offset: disabled [ 4930.750205] CPU features: 0x0002,20002004 [ 4930.754207] Memory Limit: none [ 4930.757259] Rebooting in 10 seconds.. does not look that good the latest version , switching pack the dtb file also this problem shows up cat /sys/class/thermal/thermal_zone0/temp: invalid argument
  4. ubuntu with dtb file file from today 06.09. works ___ ____ _ _____ / _ \| _ \(_) |___ / | | | | |_) | | |_ \ | |_| | __/| | ___) | \___/|_| |_| |____/ Welcome to Ubuntu Bionic with Armbian Linux 5.3.0-rc6-sunxi64 System load: 2.84 0.71 0.24 Up time: 0 min Memory usage: 20 % of 1993MB IP: 11.12.13.14 Usage of /: 83% of 7.1G storage/: 60% of 1.9T [ General system configuration (beta): armbian-config ] Last login: Fri Sep 6 18:28:15 2019 from 11.12.13.15 uname -a Linux orangepi3 5.3.0-rc6-sunxi64 #5.96.190906 SMP Fri Sep 6 08:19:53 CEST 2019 aarch64 aarch64 aarch64 GNU/Linux
  5. Hi, i was able to build an Armbian image whit your provided dts files for the GS1, HDMI works but it stops booting after starting version 241 and scanning for btrfs mounts. now compiling librelec.... it is not bbooting, burned the image to an sd card and insertted this card into the beelink gs1, just nothing... no console access, i did not open the box. best regards
  6. Hi guys, following probelm happens over night, this are the console messages, received [87292.871955] rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [87292.877889] rcu: 0-...0: (2 GPs behind) idle=92a/0/0x1 softirq=1158340/1158341 fqs=2486399 [87292.886312] rcu: (detected by 2, t=5046854 jiffies, g=3598193, q=16685) uname -a Linux orangepi3 5.1.16-sunxi64 #5.91.190708 SMP Tue Jul 9 00:38:37 CEST 2019 aarch64 aarch64 aarch64 GNU/Linux no i have set verbosity to 7 maybe i can post more tomorrow any idea ?
  7. hi, you need to overid the dtp file in here ll /boot/dtb-5.1.7-sunxi64/allwinner/ total 968 drwxr-xr-x 3 root root 4096 Jun 15 12:19 ./ drwxr-xr-x 3 root root 4096 Jun 15 12:21 ../ drwxr-xr-x 2 root root 4096 Jun 15 12:19 overlay/ -rw-r--r-- 1 root root 33668 Jun 14 23:52 sun50i-a64-amarula-relic.dtb -rw-r--r-- 1 root root 35345 Jun 14 23:52 sun50i-a64-bananapi-m64.dtb -rw-r--r-- 1 root root 34228 Jun 14 23:52 sun50i-a64-nanopi-a64.dtb -rw-r--r-- 1 root root 35180 Jun 14 23:52 sun50i-a64-olinuxino.dtb -rw-r--r-- 1 root root 35776 Jun 14 23:52 sun50i-a64-orangepi-win.dtb -rw-r--r-- 1 root root 34570 Jun 14 23:52 sun50i-a64-pine64-lts.dtb -rw-r--r-- 1 root root 35082 Jun 14 23:52 sun50i-a64-pine64-plus.dtb -rw-r--r-- 1 root root 35004 Jun 14 23:52 sun50i-a64-pine64.dtb -rw-r--r-- 1 root root 36584 Jun 14 23:52 sun50i-a64-pinebook.dtb -rw-r--r-- 1 root root 34582 Jun 14 23:52 sun50i-a64-sopine-baseboard.dtb -rw-r--r-- 1 root root 36526 Jun 14 23:52 sun50i-a64-teres-i.dtb -rw-r--r-- 1 root root 31397 Jun 14 23:52 sun50i-h5-bananapi-m2-plus-v1.2.dtb -rw-r--r-- 1 root root 31004 Jun 14 23:52 sun50i-h5-bananapi-m2-plus.dtb -rw-r--r-- 1 root root 29328 Jun 14 23:52 sun50i-h5-emlid-neutis-n5-devboard.dtb -rw-r--r-- 1 root root 29798 Jun 14 23:52 sun50i-h5-libretech-all-h3-cc.dtb -rw-r--r-- 1 root root 32108 Jun 14 23:52 sun50i-h5-nanopi-k1-plus.dtb -rw-r--r-- 1 root root 29396 Jun 14 23:52 sun50i-h5-nanopi-m1-plus2.dtb -rw-r--r-- 1 root root 29316 Jun 14 23:52 sun50i-h5-nanopi-neo-core2.dtb -rw-r--r-- 1 root root 29412 Jun 14 23:52 sun50i-h5-nanopi-neo-plus2.dtb -rw-r--r-- 1 root root 29061 Jun 14 23:52 sun50i-h5-nanopi-neo2-v1.1.dtb -rw-r--r-- 1 root root 29065 Jun 14 23:52 sun50i-h5-nanopi-neo2.dtb -rw-r--r-- 1 root root 29991 Jun 14 23:52 sun50i-h5-orangepi-pc2.dtb -rw-r--r-- 1 root root 29918 Jun 14 23:52 sun50i-h5-orangepi-prime.dtb -rw-r--r-- 1 root root 29138 Jun 14 23:52 sun50i-h5-orangepi-zero-plus.dtb -rw-r--r-- 1 root root 29143 Jun 14 23:52 sun50i-h5-orangepi-zero-plus2.dtb -rw-r--r-- 1 root root 27608 May 30 22:14 sun50i-h6-orangepi-3.dtb <---------------------------------------- -rw-r--r-- 1 root root 27359 Jun 14 23:52 sun50i-h6-orangepi-lite2.dtb -rw-r--r-- 1 root root 26874 Jun 14 23:52 sun50i-h6-orangepi-one-plus.dtb -rw-r--r-- 1 root root 27617 Jun 14 23:52 sun50i-h6-pine-h64.dtb
  8. here is the working dtb file for opi3 best regards sun50i-h6-orangepi-3.dtb
  9. ___ ____ _ _____ / _ \| _ \(_) |___ / | | | | |_) | | |_ \ | |_| | __/| | ___) | \___/|_| |_| |____/ Welcome to Ubuntu Bionic with Armbian Linux 5.1.7-sunxi64 System load: 0.04 0.05 0.04 Up time: 9:20 hours Memory usage: 26 % of 1997MB Zram usage: 7 % of 998Mb IP: 4.3.2.1 CPU temp: 54°C Usage of /: 82% of 7.1G storage/: 55% of 1.9T [ General system configuration (beta): armbian-config ] Last login: Wed Jun 12 09:46:29 2019 from 1.2.3.4 root@orangepi3:/home/pi3# uname -a Linux orangepi3 5.1.7-sunxi64 #5.89.190612 SMP Tue Jun 11 23:22:44 CEST 2019 aarch64 aarch64 aarch64 GNU/Linux with dtb from Armbian_5.88.190601_Orangepi3_Ubuntu_bionic_dev_5.1.5.7z up and runing on EMMC. just boot the 5.1.5 image and copy over the old dtb ...
  10. [ 4.631820] Unable to handle kernel paging request at virtual address ffff0000126fd9a8 [ 4.639748] Mem abort info: [ 4.642548] ESR = 0x86000006 [ 4.645598] Exception class = IABT (current EL), IL = 32 bits [ 4.651507] SET = 0, FnV = 0 [ 4.654556] EA = 0, S1PTW = 0 [ 4.657694] swapper pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 4.664557] [ffff0000126fd9a8] pgd=00000000b7fff003, pud=00000000b7ffe003, pmd=0000000000000000 [ 4.673245] Internal error: Oops: 86000006 [#1] SMP [ 4.678115] Modules linked in: snd_pcm_dmaengine snd_pcm uas snd_timer snd soundcore btsdio(+) bluetooth brcmfmac ch341 brcmutil usbserial cfg80211 dw_hdmi_cec dw_hdmi_i2s_audio rfkill sun50i_h6_ths thermal_sys cpufreq_dt realtek dwmac_sun8i mdio_mux [ 4.700264] Process systemd-udevd (pid: 469, stack limit = 0x(____ptrval____)) [ 4.707477] CPU: 0 PID: 469 Comm: systemd-udevd Not tainted 5.1.7-sunxi64 #5.89.190612 [ 4.715381] Hardware name: OrangePi 3 (DT) [ 4.719470] pstate: 20000085 (nzCv daIf -PAN -UAO) [ 4.724257] pc : 0xffff0000126fd9a8 [ 4.727747] lr : __update_load_avg_se+0x14/0x1e8 [ 4.732355] sp : ffff000010003bc0 [ 4.735663] x29: ffff000010003bc0 x28: ffff800074450000 [ 4.740967] x27: 0000000000000000 x26: 0000000000000003 [ 4.746271] x25: 0000000000000003 x24: 000000011413cb58 [ 4.751575] x23: 0000000000000009 x22: ffff800073b5d200 [ 4.756878] x21: 0000000000000000 x20: ffff800009a81ac0 [ 4.762182] x19: ffff800077bc9e00 x18: 0000000000000000 [ 4.767485] x17: 0000000000000000 x16: 0000000000000000 [ 4.772787] x15: 0000000000000000 x14: 0000000000000000 [ 4.778090] x13: 0000000000000000 x12: 0000000000000030 [ 4.783393] x11: 0101010101010101 x10: 0000000000000040 [ 4.788696] x9 : ffff000010dd69e0 x8 : ffff000010dd69d8 [ 4.793999] x7 : ffff8000750002d8 x6 : 0000000009345c38 [ 4.799302] x5 : 0000000000000004 x4 : 000000011413b800 [ 4.804605] x3 : 0000000000001358 x2 : ffff800009a81ac0 [ 4.809908] x1 : ffff800077bc9e00 x0 : 000000011413cb58 [ 4.815212] Call trace: [ 4.817654] 0xffff0000126fd9a8 [ 4.820791] enqueue_task_fair+0xa8/0x6a8 [ 4.824796] activate_task+0x4c/0xa0 [ 4.828365] ttwu_do_activate.isra.10+0x4c/0x88 [ 4.832889] try_to_wake_up+0x208/0x408 [ 4.836719] default_wake_function+0x10/0x18 [ 4.840981] __wake_up_common+0x88/0x150 [ 4.844899] __wake_up_locked+0x18/0x20 [ 4.848728] complete+0x78/0xb0 [ 4.851866] mmc_wait_done+0x10/0x18 [ 4.855436] mmc_request_done+0xb4/0x160 [ 4.859353] sunxi_mmc_irq+0x374/0x3c0 [ 4.863100] __handle_irq_event_percpu+0x6c/0x190 [ 4.867797] handle_irq_event_percpu+0x34/0x88 [ 4.872234] handle_irq_event+0x40/0x98 [ 4.876064] handle_fasteoi_irq+0xcc/0x1a8 [ 4.880155] generic_handle_irq+0x24/0x38 [ 4.884158] __handle_domain_irq+0x5c/0xb0 [ 4.888249] gic_handle_irq+0x58/0xa8 [ 4.891905] el1_irq+0xb8/0x140 [ 4.895043] kernfs_find_ns+0x60/0x120 [ 4.898786] kernfs_iop_lookup+0x4c/0xb8 [ 4.902703] __lookup_slow+0x9c/0x1a8 [ 4.906359] lookup_slow+0x3c/0x60 [ 4.909754] walk_component+0x218/0x330 [ 4.913585] path_lookupat+0x94/0x1f8 [ 4.917241] filename_lookup+0x8c/0x160 [ 4.921071] user_path_at_empty+0x48/0x58 [ 4.925075] do_readlinkat+0x74/0x170 [ 4.928731] __arm64_sys_readlinkat+0x1c/0x28 [ 4.933084] el0_svc_common.constprop.0+0x64/0x160 [ 4.937867] el0_svc_handler+0x20/0x78 [ 4.941610] el0_svc+0x8/0xc [ 4.944489] Code: bad PC value [ 4.947539] ---[ end trace fb3818787af04e1c ]--- [ 4.952149] Kernel panic - not syncing: Fatal exception in interrupt [ 4.958488] SMP: stopping secondary CPUs [ 6.004071] SMP: failed to stop secondary CPUs 0-1,3 [ 6.009028] Kernel Offset: disabled [ 6.012511] CPU features: 0x002,20002004 [ 6.016426] Memory Limit: none [ 6.019478] Rebooting in 10 seconds.. [ 16.263075] SMP: stopping secondary CPUs [ 17.308656] SMP: failed to stop secondary CPUs 0-1,3 so with the old dtb for opi3 from 5.1.5 image mention earlier in the posts this is running fine from emmc
  11. Hi, there seams to be an error in the latest upügrade package dpkg-deb: error: unexpected end of file in archive member header in /var/cache/apt/archives/armbian-firmware_5.86.190514_all.deb dpkg: error processing archive /var/cache/apt/archives/armbian-firmware_5.86.190514_all.deb (--unpack): dpkg-deb --fsys-tarfile subprocess returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/armbian-firmware_5.86.190514_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) ls -la /var/cache/apt/archives/armbian-firmware_5.86.190514_all.deb -rw-r--r-- 1 root root 544 May 14 18:40 /var/cache/apt/archives/armbian-firmware_5.86.190514_all.deb file size is only 544 bytes thanks and keep up this awesome work
  12. hi, nice to see something happening for the Beelink GS1, since Beelink seems to have aboneded the device allready, development for the orangepi H6 is realy going forwared and is allready usable, is there a way i could assist here to get a mainline kernel runing on the gs1 ? i tried the android 9.0 image from tanix t6, it boots fine on the beelink as well, but since te tanix t6 only has 10/100mb ethernet it is not usable at all on the gs1..
  13. Hi Guys, thanks for your hard work on this, my board has finally arrivce and is ready to be picked up at the post office, hopefully tomorrow. i saw this ggoing on cnxsoftware; https://gitlab.freedesktop.org/panfrost did you try to get this compiled allready for the gpu? best regards
  14. hi guys, i just build the image, so you could give it a try... https://github.com/krachlatte/armbian-orangepi3/releases/tag/v0.12 i still did not receive the hardware many thanks so far
  15. does that mean usb not working in v0.11 ? still waiting for the package to arive
  16. did you try to do an insmod realtek, because here it is missing still did not receive the ornagepi 3 to do tests.
  17. Android 9.0 for Orange Pi One Plus https://www.cnx-software.com/2019/03/02/orange-pi-android-9-0-rk3399-mt6737-linux-source-code/ that sounds pretty awesome, and it boots from sd card on my gs1 thats pretty awesome
  18. wifi socket, to powercut the device from remote
  19. i think the problerm is in this files these are coiming wiht the overlay, cbecuase forme the schematic its not PA oit is PD6 for the gmac since you say v0.06 was working i changed back the usb settings i will upload a ne image &usb2phy { usb0_vbus-supply = <&reg_usb_vbus>; + usb1_vbus-supply = <&reg_usb_vbus>; - usb3_vbus-supply = <&reg_usb_vbus>; status = "okay"; }; sun50i-h6-spi-add-cs1.dts and sun50i-a64-spi-add-cs1.dts v0.11 released and available for download
  20. please see my beelink GS1 booting, could you check with modprobe and even try insmod if you are able to load the realtek module ? the beelink one runs with compatible = "allwinner,sun50i-a64-emac"; and i think the board is qute similar to the orangepi3 right ? soemthing prefents the realtek module from loading best regards
  21. the biggest problem is, i still do not have the hardware, i orderd on 30.01. shipping was 2 or 3 days later, and latest update on tracking is from 12.02. almost 1 month later, this is taking very long this time. so, i only get netwokring running when i use see below, for the beelink GS1.... and ther are problems with the interupts (irqs) i think, but i do not have uart available to see waht happens with the images boot when using the other compatible option mentioned below, because i do not know were the uart pins are...., i am only connected via ssh.... its a bit sluggish... and it gets stuck and laggy. the emac parts from: sun50i-h6.dtsi so something is diffrent from sun50i-h6-emac and sun50i-a64-emac, and i do not know what
  22. where to find a good device tree guide relatedt to GPIOs and how to creat dts files, i think there is a problem with dts files dt-bindings of the H6 and A64.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines