Showing results for 'op_mode=2'. - Armbian Community Forums

Orange Pi 5 plus - 6.7.0-rc4 Wi-Fi hard blocked

ricardo_brz posted a topic in Orange Pi 5 Plus

After looking at this message from @Seb042 I thought it would be better to open a new topic to discuss this. From what I saw from my install: $ dmesg ... [ 6.166453] iwlwifi 0002:21:00.0: api flags index 2 larger than supported by driver [ 6.166480] iwlwifi 0002:21:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 93.8.63.28 [ 6.167021] iwlwifi 0002:21:00.0: loaded firmware version 59.601f3a66.0 ty-a0-gf-a0-59.ucode op_mode iwlmvm [ 6.267334] iwlwifi 0002:21:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420 [ 6.273748] iwlwifi 0002:21:00.0: reporting RF_KILL (radio disabled) [ 6.450150] iwlwifi 0002:21:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f [ 6.450175] iwlwifi 0002:21:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 6.450189] iwlwifi 0002:21:00.0: WFPM_AUTH_KEY_0: 0x90 [ 6.450206] iwlwifi 0002:21:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 6.450997] iwlwifi 0002:21:00.0: Detected RF GF, rfid=0x10d000 [ 6.517606] iwlwifi 0002:21:00.0: base HW address: ab:cd:ef:01:23:45 [ 6.571168] iwlwifi 0002:21:00.0 wlP2p33s0: renamed from wlan0 ... I had the same error, with the same chip (AX210). I looked for each of the message and maybe, and this is just an assumption, we, AX201 users, will have to wait until the the driver is updated for the 6.7 line? Is that right?

PCIe IRQ for M.2 WiFi not working correctly

ScottP replied to knuxyl's topic in Rockchip

I using an intel ax210 on armbian with 6.1.x kernel. Armbian did not have firmware for the card, i added them manually. Whether intel cards do interrupts differently idk uname -r 6.1.7-rk35xx scott@3dp:/boot/dtb/rockchip/overlay$ dmesg|grep iwl [ 14.462615] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 14.480578] iwlwifi 0000:01:00.0: api flags index 2 larger than supported by driver [ 14.480668] iwlwifi 0000:01:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.36 [ 14.482525] iwlwifi 0000:01:00.0: loaded firmware version 72.daa05125.0 ty-a0-gf-a0-72.ucode op_mode iwlmvm [ 14.648881] iwlwifi 0000:01:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420 [ 14.845179] iwlwifi 0000:01:00.0: loaded PNVM version 64acdc51 [ 14.861028] iwlwifi 0000:01:00.0: Detected RF GF, rfid=0x10d000 [ 14.930488] iwlwifi 0000:01:00.0: base HW address: 3c:e9:f7:5f:84:da [ 15.199855] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0

Cameras Issues While Connected to USB3.0

RaphaelTrombini posted a topic in Beginners

Hello Everyone! I'm currently working on a nano pi m4b with a rockchip 3399 processor on it. I need to use an USB camera for my application but I am experiencing some issues that have been really hard to track down lately. First of all I'm using a 5 mega pixels camera with a OV5640 CMOS sensor and I experience some glitches with the image while live streaming. Besides that, I can only get an image while connected to USB 2.0, the 3.0 gives me a black screen with sporadic glitched frames. I'm running Linux 4.4.213-rk3399 on it and here are the dmesg dump logs I'm geting. Has anyone else had this kind of issue? [Feb24 19:13] Booting Linux on physical CPU 0x0 [ +0.000000] Initializing cgroup subsys cpuset [ +0.000000] Initializing cgroup subsys cpu [ +0.000000] Initializing cgroup subsys cpuacct [ +0.000000] Linux version 4.4.213-rk3399 (root@beast) (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) ) #1 SMP Fri Nov 20 20:43:09 CET 2020 [ +0.000000] Boot CPU: AArch64 Processor [410fd034] [ +0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ +0.000000] On node 0 totalpages: 523776 [ +0.000000] DMA zone: 8184 pages used for memmap [ +0.000000] DMA zone: 0 pages reserved [ +0.000000] DMA zone: 523776 pages, LIFO batch:31 [ +0.000000] psci: probing for conduit method from DT. [ +0.000000] psci: PSCIv1.0 detected in firmware. [ +0.000000] psci: Using standard PSCI v0.2 function IDs [ +0.000000] psci: MIGRATE_INFO_TYPE not supported. [ +0.000000] psci: SMC Calling Convention v1.0 [ +0.000000] PERCPU: Embedded 20 pages/cpu @ffffffc07fee5000 s42216 r8192 d31512 u81920 [ +0.000000] pcpu-alloc: s42216 r8192 d31512 u81920 alloc=20*4096 [ +0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ +0.000000] Detected VIPT I-cache on CPU0 [ +0.000000] CPU features: enabling workaround for ARM erratum 845719 [ +0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515592 [ +0.000000] Kernel command line: root=LABEL=SYSTEM rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=15158a89-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u usbcore.autosuspend=-1 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 [ +0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ +0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ +0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ +0.000000] software IO TLB: mapped [mem 0x757a7000-0x797a7000] (64MB) [ +0.000000] Memory: 1962680K/2095104K available (11518K kernel code, 1402K rwdata, 6140K rodata, 1088K init, 1954K bss, 132424K reserved, 0K cma-reserved) [ +0.000000] Virtual kernel memory layout: modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB) .init : 0xffffff80091d0000 - 0xffffff80092e0000 ( 1088 KB) .text : 0xffffff8008080000 - 0xffffff8008bc0000 ( 11520 KB) .rodata : 0xffffff8008bc0000 - 0xffffff80091d0000 ( 6208 KB) .data : 0xffffff80092e0000 - 0xffffff800943e808 ( 1403 KB) vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual) fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB) PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB) memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB) [ +0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ +0.000000] Hierarchical RCU implementation. [ +0.000000] Build-time adjustment of leaf fanout to 64. [ +0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ +0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ +0.000000] NR_IRQS:64 nr_irqs:64 0 [ +0.000000] GIC: Using split EOI/Deactivate mode [ +0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000 [ +0.000000] ITS: allocated 65536 Devices @7d500000 (psz 64K, shr 0) [ +0.000000] ITS: using cache flushing for cmd queue [ +0.000000] GIC: using LPI property table @0x000000007d490000 [ +0.000000] ITS: Allocated 1792 chunks for LPIs [ +0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000 [ +0.000000] CPU0: using LPI pending table @0x000000007d4a0000 [ +0.000000] GIC: using cache flushing for LPI property table [ +0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ +0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ +0.000000] rockchip_mmc_get_phase: invalid clk rate [ +0.000000] rockchip_mmc_get_phase: invalid clk rate [ +0.000000] rockchip_mmc_get_phase: invalid clk rate [ +0.000000] rockchip_mmc_get_phase: invalid clk rate [ +0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work [ +0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work [ +0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ +0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ +0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ +0.001462] Console: colour dummy device 80x25 [ +0.000205] console [tty1] enabled [ +0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ +0.000012] pid_max: default: 32768 minimum: 301 [ +0.000115] Security Framework initialized [ +0.000011] Yama: becoming mindful. [ +0.000022] AppArmor: AppArmor disabled by boot time parameter [ +0.000052] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ +0.000012] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ +0.000704] Initializing cgroup subsys io [ +0.000019] Initializing cgroup subsys memory [ +0.000032] Initializing cgroup subsys devices [ +0.000014] Initializing cgroup subsys freezer [ +0.000013] Initializing cgroup subsys net_cls [ +0.000012] Initializing cgroup subsys perf_event [ +0.000013] Initializing cgroup subsys net_prio [ +0.000018] Initializing cgroup subsys hugetlb [ +0.000011] Initializing cgroup subsys pids [ +0.000040] ftrace: allocating 41759 entries in 164 pages [ +0.111603] sched-energy: Sched-energy-costs installed from DT [ +0.000019] CPU0: update cpu_capacity 401 [ +0.000054] ASID allocator initialised with 32768 entries [ +0.002899] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ +0.000554] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ +0.001348] Detected VIPT I-cache on CPU1 [ +0.000032] CPU1: found redistributor 1 region 0:0x00000000fef20000 [ +0.000030] CPU1: using LPI pending table @0x000000007d720000 [ +0.000044] CPU1: update cpu_capacity 401 [ +0.000004] CPU1: Booted secondary processor [410fd034] [ +0.000547] Detected VIPT I-cache on CPU2 [ +0.000021] CPU2: found redistributor 2 region 0:0x00000000fef40000 [ +0.000028] CPU2: using LPI pending table @0x000000007d750000 [ +0.000027] CPU2: update cpu_capacity 401 [ +0.000004] CPU2: Booted secondary processor [410fd034] [ +0.000516] Detected VIPT I-cache on CPU3 [ +0.000020] CPU3: found redistributor 3 region 0:0x00000000fef60000 [ +0.000027] CPU3: using LPI pending table @0x000000007d7a0000 [ +0.000026] CPU3: update cpu_capacity 401 [ +0.000004] CPU3: Booted secondary processor [410fd034] [ +0.000531] Detected PIPT I-cache on CPU4 [ +0.000026] CPU4: found redistributor 100 region 0:0x00000000fef80000 [ +0.000038] CPU4: using LPI pending table @0x000000007d7e0000 [ +0.000038] CPU4: update cpu_capacity 1024 [ +0.000003] CPU4: Booted secondary processor [410fd082] [ +0.000560] Detected PIPT I-cache on CPU5 [ +0.000018] CPU5: found redistributor 101 region 0:0x00000000fefa0000 [ +0.000036] CPU5: using LPI pending table @0x000000007cc10000 [ +0.000026] CPU5: update cpu_capacity 1024 [ +0.000003] CPU5: Booted secondary processor [410fd082] [ +0.000088] Brought up 6 CPUs [ +0.000086] SMP: Total of 6 processors activated. [ +0.000009] CPU features: detected feature: GIC system register CPU interface [ +0.000010] CPU features: detected feature: 32-bit EL0 Support [ +0.000011] CPU: All CPU(s) started at EL2 [ +0.000046] alternatives: patching kernel code [ +0.001384] devtmpfs: initialized [ +0.018199] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ +0.000024] futex hash table entries: 2048 (order: 5, 131072 bytes) [ +0.000471] xor: measuring software checksum speed [ +0.039147] 8regs : 2855.000 MB/sec [ +0.040061] 8regs_prefetch: 2552.000 MB/sec [ +0.040061] 32regs : 3211.000 MB/sec [ +0.040061] 32regs_prefetch: 2843.000 MB/sec [ +0.000006] xor: using function: 32regs (3211.000 MB/sec) [ +0.000021] pinctrl core: initialized pinctrl subsystem [ +0.000226] regulator-dummy: no parameters [ +0.000539] NET: Registered protocol family 16 [ +0.007129] cpuidle: using governor ladder [ +0.008006] cpuidle: using governor menu [ +0.000023] Registered FIQ tty driver [ +0.000290] vdso: 2 pages (1 code @ ffffff8008bc6000, 1 data @ ffffff80092e5000) [ +0.000027] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ +0.000163] DMA: preallocated 256 KiB pool for atomic allocations [ +0.016791] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0 [ +0.000076] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1 [ +0.000070] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2 [ +0.000071] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3 [ +0.000069] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4 [ +0.007650] console [pstore-1] enabled [ +0.000008] pstore: Registered ramoops as persistent store backend [ +0.000009] ramoops: attached 0xf0000@0x110000, ecc: 0/0 [ +0.003155] console [ttyFIQ0] enabled [ +0.000220] Registered fiq debugger ttyFIQ0 [ +0.075693] raid6: int64x1 gen() 450 MB/s [ +0.068094] raid6: int64x1 xor() 410 MB/s [ +0.068119] raid6: int64x2 gen() 765 MB/s [ +0.068083] raid6: int64x2 xor() 596 MB/s [ +0.068117] raid6: int64x4 gen() 1072 MB/s [ +0.068078] raid6: int64x4 xor() 666 MB/s [ +0.068106] raid6: int64x8 gen() 824 MB/s [ +0.068101] raid6: int64x8 xor() 603 MB/s [ +0.068099] raid6: neonx1 gen() 908 MB/s [ +0.068095] raid6: neonx1 xor() 663 MB/s [ +0.068152] raid6: neonx2 gen() 1548 MB/s [ +0.068069] raid6: neonx2 xor() 989 MB/s [ +0.068112] raid6: neonx4 gen() 1836 MB/s [ +0.068105] raid6: neonx4 xor() 1149 MB/s [ +0.068122] raid6: neonx8 gen() 1697 MB/s [ +0.068081] raid6: neonx8 xor() 1235 MB/s [ +0.000008] raid6: using algorithm neonx4 gen() 1836 MB/s [ +0.000008] raid6: .... xor() 1149 MB/s, rmw enabled [ +0.000007] raid6: using intx1 recovery algorithm [ +0.001076] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0) [ +0.000048] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0) [ +0.000307] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]' [ +0.000025] vcc3v3_sys: 3300 mV [ +0.000175] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV [ +0.000055] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc5v0-host-regulator[0]' [ +0.000018] vcc5v0_host: 5000 mV [ +0.000156] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 5000000uV [ +0.000055] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc5v0-sys[0]' [ +0.000017] vcc5v0_sys: 5000 mV [ +0.000143] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV [ +0.000052] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vccadc-ref[0]' [ +0.000017] vcc1v8_sys: 1800 mV [ +0.000156] reg-fixed-voltage vccadc-ref: vcc1v8_sys supplying 1800000uV [ +0.000162] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-sd[0]' - status (0) [ +0.000052] vcc_sd: 3000 mV [ +0.000158] reg-fixed-voltage vcc-sd: vcc_sd supplying 3000000uV [ +0.000051] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]' [ +0.000017] vcc_phy: no parameters [ +0.000151] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV [ +0.000082] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-lcd[0]' - status (0) [ +0.000042] reg-fixed-voltage vcc-lcd: Looking up vin-supply from device tree [ +0.000049] vcc_lcd: supplied by vcc5v0_sys [ +0.024407] vcc_lcd: 3300 mV [ +0.000175] reg-fixed-voltage vcc-lcd: vcc_lcd supplying 3300000uV [ +0.000686] iommu: Adding device ff650000.vpu_service to group 0 [ +0.000091] iommu: Adding device ff660000.rkvdec to group 1 [ +0.000119] iommu: Adding device ff8f0000.vop to group 2 [ +0.000096] iommu: Adding device ff900000.vop to group 3 [ +0.000099] iommu: Adding device ff910000.rkisp1 to group 4 [ +0.000099] iommu: Adding device ff920000.rkisp1 to group 5 [ +0.000516] rk_iommu ff650800.iommu: can't get sclk [ +0.000287] rk_iommu ff660480.iommu: can't get sclk [ +0.000220] rk_iommu ff8f3f00.iommu: can't get sclk [ +0.000182] rk_iommu ff903f00.iommu: can't get sclk [ +0.000177] rk_iommu ff914000.iommu: can't get sclk [ +0.000174] rk_iommu ff924000.iommu: can't get sclk [ +0.000387] SCSI subsystem initialized [ +0.000204] libata version 3.00 loaded. [ +0.000202] usbcore: registered new interface driver usbfs [ +0.000047] usbcore: registered new interface driver hub [ +0.000109] usbcore: registered new device driver usb [ +0.000102] media: Linux media interface: v0.10 [ +0.000039] Linux video capture interface: v2.00 [ +0.000074] pps_core: LinuxPPS API ver. 1 registered [ +0.000008] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ +0.000026] PTP clock support registered [ +0.001251] Advanced Linux Sound Architecture Driver Initialized. [ +0.000941] NetLabel: Initializing [ +0.000009] NetLabel: domain hash size = 128 [ +0.000006] NetLabel: protocols = UNLABELED CIPSOv4 [ +0.000041] NetLabel: unlabeled traffic allowed by default [ +0.000272] rockchip-cpuinfo cpuinfo: Serial : bb1bd30f66833859 [ +0.000633] clocksource: Switched to clocksource arch_sys_counter [ +0.046126] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ +0.000132] NET: Registered protocol family 2 [ +0.000455] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ +0.000138] TCP bind hash table entries: 16384 (order: 7, 524288 bytes) [ +0.000412] TCP: Hash tables configured (established 16384 bind 16384) [ +0.000083] UDP hash table entries: 1024 (order: 4, 98304 bytes) [ +0.000080] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes) [ +0.000258] NET: Registered protocol family 1 [ +0.000043] PCI: CLS 0 bytes, default 64 [ +0.000746] Trying to unpack rootfs image as initramfs... [ +0.360122] Freeing initrd memory: 7156K [ +0.000565] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ +0.000091] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ +0.001572] kvm [1]: 8-bit VMID [ +0.000010] kvm [1]: Hyp mode initialized successfully [ +0.000128] kvm [1]: interrupt-controller@fff20000 IRQ10 [ +0.000202] kvm [1]: timer IRQ12 [ +0.003613] audit: initializing netlink subsys (disabled) [ +0.000058] audit: type=2000 audit(1.816:1): initialized [ +0.000402] Initialise system trusted keyring [ +0.000395] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ +0.007390] VFS: Disk quotas dquot_6.6.0 [ +0.000159] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ +0.001459] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ +0.000675] fuse init (API version 7.23) [ +0.000576] JFS: nTxBlock = 8192, nTxLock = 65536 [ +0.005348] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ +0.001763] Key type big_key registered [ +0.000022] TEE Core Framework initialization (ver 1:0.1) [ +0.000030] TEE armv7 Driver initialization [ +0.000469] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0" [ +0.000011] TEE core: Alloc the misc device "opteearmtz00" (id=0) [ +0.000192] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62) [ +0.005742] Key type asymmetric registered [ +0.000023] Asymmetric key parser 'x509' registered [ +0.000202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ +0.000134] io scheduler noop registered [ +0.000012] io scheduler deadline registered (default) [ +0.000040] io scheduler cfq registered [ +0.001082] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree [ +0.000416] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree [ +0.000015] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed [ +0.000087] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up vbus-supply from device tree [ +0.000012] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed [ +0.000014] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator [ +0.001148] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree [ +0.000013] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed [ +0.000885] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc0-supply from device tree [ +0.000015] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc0-supply property in node /power-management@ff310000/power-controller failed [ +0.000331] phy phy-ff800000.phy.3: Looking up phy-supply from device tree [ +0.000013] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed [ +0.000134] phy phy-ff800000.phy.4: Looking up phy-supply from device tree [ +0.000012] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed [ +0.000105] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc1-supply from device tree [ +0.000013] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc1-supply property in node /power-management@ff310000/power-controller failed [ +0.000370] phy phy-pcie-phy.5: Looking up phy-supply from device tree [ +0.000013] phy phy-pcie-phy.5: Looking up phy-supply property in node /pcie-phy failed [ +0.002271] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep [ +0.000013] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup [ +0.000013] of_get_named_gpiod_flags: can't parse 'ep-gpios' property of node '/pcie@f8000000[0]' [ +0.000011] of_get_named_gpiod_flags: can't parse 'ep-gpio' property of node '/pcie@f8000000[0]' [ +0.000009] rockchip-pcie f8000000.pcie: using lookup tables for GPIO lookup [ +0.000011] rockchip-pcie f8000000.pcie: lookup for GPIO ep failed [ +0.000228] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree [ +0.000013] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply property in node /pcie@f8000000 failed [ +0.000016] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found [ +0.000010] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree [ +0.000011] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed [ +0.000013] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found [ +0.000009] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree [ +0.000011] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed [ +0.000014] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found [ +0.000010] rockchip-pcie f8000000.pcie: no bus-scan-delay-ms in device tree, default 0 ms [ +0.000010] rockchip-pcie f8000000.pcie: missing "memory-region" property [ +0.000016] PCI host bridge /pcie@f8000000 ranges: [ +0.000022] MEM 0xfa000000..0xfbdfffff -> 0xfa000000 [ +0.000012] IO 0xfbe00000..0xfbefffff -> 0xfbe00000 [ +0.600778] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout! [ +0.000024] rockchip-pcie f8000000.pcie: deferred probe failed [ +0.000207] rockchip-pcie: probe of f8000000.pcie failed with error -110 [ +0.000869] pwm-backlight backlight: GPIO lookup for consumer enable [ +0.000015] pwm-backlight backlight: using device tree for GPIO lookup [ +0.000122] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/backlight[0]' - status (0) [ +0.000030] no flags found for enable [ +0.000044] pwm-backlight backlight: Looking up power-supply from device tree [ +0.000015] pwm-backlight backlight: Looking up power-supply property in node /backlight failed [ +0.000022] backlight supply power not found, using dummy regulator [ +0.000723] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply from device tree [ +0.000018] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply property in node /vpu_service@ff650000 failed [ +0.000018] rk-vcodec ff650000.vpu_service: no regulator for vcodec [ +0.000265] rk-vcodec ff650000.vpu_service: probe device [ +0.000245] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled [ +0.000558] rk-vcodec ff650000.vpu_service: could not find power_model node [ +0.000012] rk-vcodec ff650000.vpu_service: init success [ +0.000205] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply from device tree [ +0.000013] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply property in node /rkvdec@ff660000 failed [ +0.000018] rk-vcodec ff660000.rkvdec: no regulator for vcodec [ +0.000459] rk-vcodec ff660000.rkvdec: probe device [ +0.000240] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled [ +0.000388] rk-vcodec ff660000.rkvdec: could not find power_model node [ +0.000010] rk-vcodec ff660000.rkvdec: init success [ +0.001504] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ +0.000013] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ +0.001385] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ +0.000012] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ +0.001101] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ +0.000610] pwm-regulator vdd-log: GPIO lookup for consumer enable [ +0.000011] pwm-regulator vdd-log: using device tree for GPIO lookup [ +0.000012] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]' [ +0.000010] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]' [ +0.000010] pwm-regulator vdd-log: using lookup tables for GPIO lookup [ +0.000010] pwm-regulator vdd-log: lookup for GPIO enable failed [ +0.000025] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000011] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000045] vdd_log: 800 <--> 1400 mV at 800 mV [ +0.000151] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000012] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000053] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000011] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000431] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ +0.000691] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A [ +0.000511] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 39, base_baud = 1500000) is a 16550A [ +0.001115] [drm] Initialized drm 1.1.0 20060810 [ +0.003923] [drm] Rockchip DRM driver version: v1.0.1 [ +0.000357] rockchip-drm display-subsystem: defer getting devfreq [ +0.000296] rockchip-vop ff900000.vop: missing rockchip,grf property [ +0.000274] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008c68818) [ +0.000049] rockchip-vop ff8f0000.vop: missing rockchip,grf property [ +0.000190] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008c68818) [ +0.000174] rockchip-drm display-subsystem: failed to bind ff940000.hdmi (ops 0xffffff8008c5d890): -517 [ +0.000246] rockchip-drm display-subsystem: master bind failed: -517 [ +0.000527] panel-friendlyelec edp-panel: Looking up power-supply from device tree [ +0.000129] panel-friendlyelec edp-panel: GPIO lookup for consumer enable [ +0.000010] panel-friendlyelec edp-panel: using device tree for GPIO lookup [ +0.000013] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/edp-panel[0]' [ +0.000010] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/edp-panel[0]' [ +0.000010] panel-friendlyelec edp-panel: using lookup tables for GPIO lookup [ +0.000010] panel-friendlyelec edp-panel: lookup for GPIO enable failed [ +0.001709] Unable to detect cache hierarchy for CPU 0 [ +0.000848] brd: module loaded [ +0.005508] loop: module loaded [ +0.000325] lkdtm: No crash points registered, enable through debugfs [ +0.002298] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree [ +0.000089] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). [ +0.000012] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). [ +0.000011] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11). [ +0.000025] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). [ +0.000194] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed [ +0.000009] rk_gmac-dwmac fe300000.ethernet: clock input from PHY [ +0.005017] rk_gmac-dwmac fe300000.ethernet: init for RGMII [ +0.000154] stmmac - user ID: 0x10, Synopsys ID: 0x35 [ +0.000008] Ring mode enabled [ +0.000007] DMA HW capability register supported [ +0.000006] Normal descriptors [ +0.000009] RX Checksum Offload Engine supported (type 2) [ +0.000007] TX Checksum insertion supported [ +0.000006] Wake-Up On Lan supported [ +0.000040] Enable RX Mitigation via HW Watchdog Timer [ +0.000111] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0) [ +0.085469] libphy: stmmac: probed [ +0.000016] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active [ +0.000010] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01) [ +0.001389] usbcore: registered new interface driver rndis_wlan [ +0.000237] Rockchip WiFi SYS interface (V1.00) ... [ +0.000071] usbcore: registered new interface driver cdc_ether [ +0.000040] usbcore: registered new interface driver rndis_host [ +0.001424] rockchip-dwc3 usb0: failed to get drvdata dwc3 [ +0.000091] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_usb3-supply from device tree [ +0.000014] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_usb3-supply property in node /power-management@ff310000/power-controller failed [ +0.004797] rockchip-dwc3 usb1: fail to get drvdata hcd [ +0.001820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ +0.000027] ehci-pci: EHCI PCI platform driver [ +0.000063] ehci-platform: EHCI generic platform driver [ +0.003948] ehci-platform fe3c0000.usb: EHCI Host Controller [ +0.000168] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1 [ +0.000108] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000 [ +0.009421] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 [ +0.000159] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ +0.000012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0.000011] usb usb1: Product: EHCI Host Controller [ +0.000009] usb usb1: Manufacturer: Linux 4.4.213-rk3399 ehci_hcd [ +0.000009] usb usb1: SerialNumber: fe3c0000.usb [ +0.000456] hub 1-0:1.0: USB hub found [ +0.000030] hub 1-0:1.0: 1 port detected [ +0.000600] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ +0.000022] ohci-platform: OHCI generic platform driver [ +0.000519] ohci-platform fe3e0000.usb: Generic Platform OHCI controller [ +0.000154] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2 [ +0.000093] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000 [ +0.058061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ +0.000012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0.000010] usb usb2: Product: Generic Platform OHCI controller [ +0.000009] usb usb2: Manufacturer: Linux 4.4.213-rk3399 ohci_hcd [ +0.000009] usb usb2: SerialNumber: fe3e0000.usb [ +0.000415] hub 2-0:1.0: USB hub found [ +0.000031] hub 2-0:1.0: 1 port detected [ +0.000952] usbcore: registered new interface driver cdc_acm [ +0.000009] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ +0.000043] usbcore: registered new interface driver cdc_wdm [ +0.000083] usbcore: registered new interface driver usbserial [ +0.000032] usbcore: registered new interface driver usbserial_generic [ +0.000024] usbserial: USB Serial support registered for generic [ +0.000872] usbcore: registered new interface driver iforce [ +0.000062] usbcore: registered new interface driver xpad [ +0.000200] usbcore: registered new interface driver usbtouchscreen [ +0.000013] <<-GTP-INFO->> GTP driver installing [ +0.000569] sensor_register_slave:mma8452,id=17 [ +0.000023] sensor_register_slave:lis3dh,id=7 [ +0.000017] sensor_register_slave:mma7660,id=18 [ +0.000016] sensor_register_slave:lsm303d,id=22 [ +0.000017] sensor_register_slave:mpu6880_acc,id=24 [ +0.000017] sensor_register_slave:mpu6500_acc,id=25 [ +0.000016] sensor_register_slave:lsm330_acc,id=26 [ +0.000017] sensor_register_slave:akm8975,id=30 [ +0.000017] sensor_register_slave:akm8963,id=31 [ +0.000017] sensor_register_slave:l3g4200d,id=45 [ +0.000016] sensor_register_slave:l3g20d,id=46 [ +0.000016] sensor_register_slave:ewtsa,id=47 [ +0.000017] sensor_register_slave:lsm330_gyro,id=51 [ +0.000016] sensor_register_slave:cm3217,id=53 [ +0.000016] sensor_register_slave:cm3218,id=54 [ +0.000637] i2c /dev entries driver [ +0.001336] fan53555-regulator 0-0040: GPIO lookup for consumer vsel [ +0.000016] fan53555-regulator 0-0040: using device tree for GPIO lookup [ +0.000048] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0) [ +0.000418] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! [ +0.000025] fan53555-regulator 0-0040: Looking up vin-supply from device tree [ +0.000091] fan53555-reg: supplied by vcc3v3_sys [ +0.001441] vdd_cpu_b: 712 <--> 1500 mV at 1000 mV [ +0.000486] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000018] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000339] fan53555-regulator 0-0041: GPIO lookup for consumer vsel [ +0.000013] fan53555-regulator 0-0041: using device tree for GPIO lookup [ +0.000044] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0) [ +0.000374] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! [ +0.000021] fan53555-regulator 0-0041: Looking up vin-supply from device tree [ +0.000069] fan53555-reg: supplied by vcc3v3_sys [ +0.001422] vdd_gpu: 712 <--> 1500 mV at 1000 mV [ +0.000444] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000017] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000704] rk808 0-001b: Pmic Chip id: 0x0 [ +0.003645] rk808 0-001b: GPIO lookup for consumer dvs [ +0.000014] rk808 0-001b: using device tree for GPIO lookup [ +0.000016] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]' [ +0.000014] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]' [ +0.000011] rk808 0-001b: using lookup tables for GPIO lookup [ +0.000013] rk808 0-001b: lookup for GPIO dvs failed [ +0.000013] rk808-regulator rk808-regulator: there is no dvs0 gpio [ +0.000012] rk808 0-001b: GPIO lookup for consumer dvs [ +0.000011] rk808 0-001b: using device tree for GPIO lookup [ +0.000013] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]' [ +0.000013] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]' [ +0.000012] rk808 0-001b: using lookup tables for GPIO lookup [ +0.000011] rk808 0-001b: lookup for GPIO dvs failed [ +0.000012] rk808-regulator rk808-regulator: there is no dvs1 gpio [ +0.000053] rk808 0-001b: Looking up vcc1-supply from device tree [ +0.000094] DCDC_REG1: supplied by vcc3v3_sys [ +0.000530] vdd_center: 750 <--> 1350 mV at 900 mV [ +0.000290] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000018] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000058] rk808 0-001b: Looking up vcc2-supply from device tree [ +0.000075] DCDC_REG2: supplied by vcc3v3_sys [ +0.000353] vdd_cpu_l: 750 <--> 1350 mV at 900 mV [ +0.000271] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000017] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000056] rk808 0-001b: Looking up vcc3-supply from device tree [ +0.000063] DCDC_REG3: supplied by vcc3v3_sys [ +0.000048] vcc_ddr: at 3300 mV [ +0.000261] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000064] rk808 0-001b: Looking up vcc4-supply from device tree [ +0.000057] DCDC_REG4: supplied by vcc3v3_sys [ +0.000199] vcc_1v8: 1800 mV [ +0.000290] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000066] rk808 0-001b: Looking up vcc6-supply from device tree [ +0.000057] LDO_REG1: supplied by vcc3v3_sys [ +0.000869] vcc1v8_dvp: 1800 mV [ +0.000292] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000071] rk808 0-001b: Looking up vcc6-supply from device tree [ +0.000057] LDO_REG2: supplied by vcc3v3_sys [ +0.000714] vcc3v0_tp: 3000 mV [ +0.000292] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000072] rk808 0-001b: Looking up vcc7-supply from device tree [ +0.000058] LDO_REG3: supplied by vcc3v3_sys [ +0.000715] vcc1v8_pmu: 1800 mV [ +0.000292] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000074] rk808 0-001b: Looking up vcc9-supply from device tree [ +0.000058] LDO_REG4: supplied by vcc3v3_sys [ +0.000195] vccio_sd: Bringing 3300000uV into 3000000-3000000uV [ +0.000134] vccio_sd: ramp_delay not set [ +0.000541] vccio_sd: 1800 <--> 3000 mV at 3000 mV [ +0.000267] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000081] rk808 0-001b: Looking up vcc9-supply from device tree [ +0.000059] LDO_REG5: supplied by vcc3v3_sys [ +0.000749] vcca3v0_codec: 3000 mV [ +0.000270] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000080] rk808 0-001b: Looking up vcc10-supply from device tree [ +0.000058] LDO_REG6: supplied by vcc3v3_sys [ +0.000712] vcc_1v5: 1500 mV [ +0.000299] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000086] rk808 0-001b: Looking up vcc7-supply from device tree [ +0.000058] LDO_REG7: supplied by vcc3v3_sys [ +0.000714] vcca1v8_codec: 1800 mV [ +0.000297] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000084] rk808 0-001b: Looking up vcc11-supply from device tree [ +0.000057] LDO_REG8: supplied by vcc3v3_sys [ +0.000714] vcc_3v0: 3000 mV [ +0.000298] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000116] rk808 0-001b: Looking up vcc8-supply from device tree [ +0.000059] SWITCH_REG1: supplied by vcc3v3_sys [ +0.000049] vcc3v3_s3: at 3300 mV [ +0.000268] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000015] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.000083] rk808 0-001b: Looking up vcc12-supply from device tree [ +0.000058] SWITCH_REG2: supplied by vcc3v3_sys [ +0.000046] vcc3v3_s0: at 3300 mV [ +0.000265] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ +0.000016] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ +0.003567] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0 [ +0.000486] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80096fc000 [ +0.001203] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80096fe000 [ +0.000892] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80097c2000 [ +0.000617] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff80097c4000 [ +0.001156] fusb302 4-0022: GPIO lookup for consumer int-n [ +0.000013] fusb302 4-0022: using device tree for GPIO lookup [ +0.000048] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0) [ +0.000036] fusb302 4-0022: GPIO lookup for consumer vbus-5v [ +0.000013] fusb302 4-0022: using device tree for GPIO lookup [ +0.000041] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0) [ +0.000040] fusb302 4-0022: GPIO lookup for consumer vbus-other [ +0.000012] fusb302 4-0022: using device tree for GPIO lookup [ +0.000014] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ +0.000013] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ +0.000012] fusb302 4-0022: using lookup tables for GPIO lookup [ +0.000013] fusb302 4-0022: lookup for GPIO vbus-other failed [ +0.000012] fusb302 4-0022: GPIO lookup for consumer discharge [ +0.000011] fusb302 4-0022: using device tree for GPIO lookup [ +0.000013] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ +0.000013] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]' [ +0.000011] fusb302 4-0022: using lookup tables for GPIO lookup [ +0.000012] fusb302 4-0022: lookup for GPIO discharge failed [ +0.000216] fusb302 4-0022: Can't get property of role, set role to default DRP [ +0.001899] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE [ +0.000214] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input0 [ +0.000847] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80097c6000 [ +0.002615] usbcore: registered new interface driver uvcvideo [ +0.000010] USB Video Class driver (1.1.1) [ +0.000800] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree [ +0.000400] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree [ +0.000089] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree [ +0.000078] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree [ +0.000074] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree [ +0.001212] Boot mode: normal [ +0.001602] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647 [ +0.000225] rockchip-thermal ff260000.tsadc: tsadc is probed successfully! [ +0.000990] dw_wdt ff848000.watchdog: Should better to setup a 'resets' property in dt, that must been named with reset [ +0.000576] device-mapper: uevent: version 1.0.3 [ +0.000426] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ +0.000780] cpu cpu0: bin=1 [ +0.000083] cpu cpu0: leakage=21 [ +0.000042] cpu cpu0: Looking up cpu-supply from device tree [ +0.012691] cpu cpu0: temp=60625, pvtm=148152 (146898 + 1254) [ +0.000413] cpu cpu0: pvtm-volt-sel=1 [ +0.000090] cpu cpu0: bin-scale=34 [ +0.000469] cpu cpu4: bin=1 [ +0.000153] cpu cpu4: leakage=40 [ +0.000040] cpu cpu4: Looking up cpu-supply from device tree [ +0.012034] cpu cpu4: temp=61250, pvtm=150557 (149857 + 700) [ +0.000144] cpu cpu4: pvtm-volt-sel=1 [ +0.000074] cpu cpu4: bin-scale=17 [ +0.000397] cpu cpu0: Looking up cpu-supply from device tree [ +0.000420] cpu cpu0: Looking up cpu-supply from device tree [ +0.000925] cpu cpu0: avs=0 [ +0.000050] cpu cpu0: scale_rate=1416000000 [ +0.000269] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 [ +0.002450] cpu cpu0: failed to find power_model node [ +0.000360] cpu cpu4: Looking up cpu-supply from device tree [ +0.000704] cpu cpu4: avs=0 [ +0.000024] cpu cpu4: scale_rate=1800000000 [ +0.000180] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 [ +0.001840] cpu cpu4: failed to find power_model node [ +0.000813] sdhci: Secure Digital Host Controller Interface driver [ +0.000006] sdhci: Copyright(c) Pierre Ossman [ +0.000009] Synopsys Designware Multimedia Card Interface Driver [ +0.001046] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode. [ +0.000037] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller. [ +0.000013] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a [ +0.000051] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo [ +0.000019] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated. [ +0.000013] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree [ +0.000009] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed [ +0.000033] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree [ +0.000009] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed [ +0.000014] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found [ +0.000007] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found [ +0.000016] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp [ +0.000007] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup [ +0.000010] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]' [ +0.000008] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]' [ +0.000007] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup [ +0.000009] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed [ +0.000236] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_sdioaudio-supply from device tree [ +0.000011] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_sdioaudio-supply property in node /power-management@ff310000/power-controller failed [ +0.000592] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. [ +0.000024] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. [ +0.000011] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a [ +0.000035] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo [ +0.000017] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated. [ +0.000008] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree [ +0.000105] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree [ +0.000069] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd [ +0.000008] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup [ +0.000009] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]' [ +0.000008] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]' [ +0.000007] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup [ +0.000008] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed [ +0.000009] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp [ +0.000007] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup [ +0.000008] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]' [ +0.000008] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]' [ +0.000007] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup [ +0.000007] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed [ +0.000161] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done [ +0.000011] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done [ +0.012559] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ +0.016451] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done [ +0.000025] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done [ +0.000134] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized [ +0.000679] sdhci-pltfm: SDHCI platform and OF driver helper [ +0.000981] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp [ +0.000019] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup [ +0.000020] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]' [ +0.000019] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]' [ +0.000016] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup [ +0.000018] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed [ +0.001164] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree [ +0.000022] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed [ +0.000051] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree [ +0.000019] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed [ +0.000033] sdhci-arasan fe330000.sdhci: No vmmc regulator found [ +0.000014] sdhci-arasan fe330000.sdhci: No vqmmc regulator found [ +0.032486] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA [ +0.003796] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/led@1[0]' - status (0) [ +0.000572] ledtrig-cpu: registered to indicate activity on CPUs [ +0.000125] hidraw: raw HID events driver (C) Jiri Kosina [ +0.000727] usbcore: registered new interface driver usbhid [ +0.000017] usbhid: USB HID core driver [ +0.000505] ashmem: initialized [ +0.001608] rockchip-dmc dmc: unable to get devfreq-event device : dfi [ +0.002094] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree [ +0.022817] Initializing XFRM netlink socket [ +0.001000] NET: Registered protocol family 10 [ +0.001906] lib80211: common routines for IEEE802.11 drivers [ +0.000029] lib80211_crypt: registered algorithm 'NULL' [ +0.000031] lib80211_crypt: registered algorithm 'WEP' [ +0.000024] lib80211_crypt: registered algorithm 'CCMP' [ +0.000023] lib80211_crypt: registered algorithm 'TKIP' [ +0.000020] [WLAN_RFKILL]: Enter rfkill_wlan_init [ +0.000724] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ +0.000108] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354 [ +0.000013] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ +0.000013] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ +0.000020] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]' [ +0.000017] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]' [ +0.000016] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]' [ +0.000088] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0) [ +0.000014] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0. [ +0.000021] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! [ +0.000013] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ +0.000016] [WLAN_RFKILL]: Exit rfkill_wlan_probe [ +0.000098] [BT_RFKILL]: Enter rfkill_rk_init [ +0.000786] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0) [ +0.000016] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83. [ +0.000021] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]' [ +0.000052] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0) [ +0.000014] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9. [ +0.000049] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0) [ +0.000014] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90. [ +0.000049] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0) [ +0.000013] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4. [ +0.001347] [BT_RFKILL]: Request irq for bt wakeup host [ +0.000105] [BT_RFKILL]: ** disable irq [ +0.000237] [BT_RFKILL]: bt shut off power [ +0.021104] [BT_RFKILL]: bt_default device registered. [ +0.000131] Key type dns_resolver registered [ +0.000413] sensor_register_slave:mpu6880_gyro,id=50 [ +0.000639] ov4689 1-0036: driver version: 00.01.01 [ +0.000021] ov4689 1-0036: could not get module information! [ +0.000058] ov4689 1-0036: GPIO lookup for consumer reset [ +0.000012] ov4689 1-0036: using device tree for GPIO lookup [ +0.000044] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff110000/ov4689@36[0]' - status (0) [ +0.000040] ov4689 1-0036: GPIO lookup for consumer pwdn [ +0.000011] ov4689 1-0036: using device tree for GPIO lookup [ +0.000039] of_get_named_gpiod_flags: parsed 'pwdn-gpios' property of node '/i2c@ff110000/ov4689@36[0]' - status (0) [ +0.000296] ov4689 1-0036: Looking up avdd-supply from device tree [ +0.000016] ov4689 1-0036: Looking up avdd-supply property in node /i2c@ff110000/ov4689@36 failed [ +0.000041] 1-0036 supply avdd not found, using dummy regulator [ +0.000083] ov4689 1-0036: Looking up dovdd-supply from device tree [ +0.000015] ov4689 1-0036: Looking up dovdd-supply property in node /i2c@ff110000/ov4689@36 failed [ +0.000021] 1-0036 supply dovdd not found, using dummy regulator [ +0.000049] ov4689 1-0036: Looking up dvdd-supply from device tree [ +0.000015] ov4689 1-0036: Looking up dvdd-supply property in node /i2c@ff110000/ov4689@36 failed [ +0.000021] 1-0036 supply dvdd not found, using dummy regulator [ +0.002749] ov4689 1-0036: Unexpected sensor id(000000), ret(-5) [ +0.000810] ov4689 2-0036: driver version: 00.01.01 [ +0.000020] ov4689 2-0036: could not get module information! [ +0.000045] ov4689 2-0036: GPIO lookup for consumer reset [ +0.000012] ov4689 2-0036: using device tree for GPIO lookup [ +0.000043] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff120000/ov4689@36[0]' - status (0) [ +0.000044] ov4689 2-0036: GPIO lookup for consumer pwdn [ +0.000012] ov4689 2-0036: using device tree for GPIO lookup [ +0.000038] of_get_named_gpiod_flags: parsed 'pwdn-gpios' property of node '/i2c@ff120000/ov4689@36[0]' - status (0) [ +0.000251] ov4689 2-0036: Looking up avdd-supply from device tree [ +0.000015] ov4689 2-0036: Looking up avdd-supply property in node /i2c@ff120000/ov4689@36 failed [ +0.000041] 2-0036 supply avdd not found, using dummy regulator [ +0.000111] ov4689 2-0036: Looking up dovdd-supply from device tree [ +0.000015] ov4689 2-0036: Looking up dovdd-supply property in node /i2c@ff120000/ov4689@36 failed [ +0.000022] 2-0036 supply dovdd not found, using dummy regulator [ +0.000054] ov4689 2-0036: Looking up dvdd-supply from device tree [ +0.000014] ov4689 2-0036: Looking up dvdd-supply property in node /i2c@ff120000/ov4689@36 failed [ +0.000021] 2-0036 supply dvdd not found, using dummy regulator [ +0.002645] ov4689 2-0036: Unexpected sensor id(000000), ret(-5) [ +0.000411] Error: Driver 'ov7750' is already registered, aborting... [ +0.000022] Error: Driver 'ov8858' is already registered, aborting... [ +0.000564] ov13850 1-0010: driver version: 00.01.01 [ +0.000020] ov13850 1-0010: could not get module information! [ +0.000045] ov13850 1-0010: GPIO lookup for consumer reset [ +0.000012] ov13850 1-0010: using device tree for GPIO lookup [ +0.000044] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff110000/ov13850@10[0]' - status (0) [ +0.000043] ov13850 1-0010: GPIO lookup for consumer pwdn [ +0.000012] ov13850 1-0010: using device tree for GPIO lookup [ +0.000038] of_get_named_gpiod_flags: parsed 'pwdn-gpios' property of node '/i2c@ff110000/ov13850@10[0]' - status (0) [ +0.000035] ov13850 1-0010: Looking up avdd-supply from device tree [ +0.000014] ov13850 1-0010: Looking up avdd-supply property in node /i2c@ff110000/ov13850@10 failed [ +0.000041] 1-0010 supply avdd not found, using dummy regulator [ +0.000074] ov13850 1-0010: Looking up dovdd-supply from device tree [ +0.000014] ov13850 1-0010: Looking up dovdd-supply property in node /i2c@ff110000/ov13850@10 failed [ +0.000022] 1-0010 supply dovdd not found, using dummy regulator [ +0.000061] ov13850 1-0010: Looking up dvdd-supply from device tree [ +0.000015] ov13850 1-0010: Looking up dvdd-supply property in node /i2c@ff110000/ov13850@10 failed [ +0.000022] 1-0010 supply dvdd not found, using dummy regulator [ +0.002023] ov13850 1-0010: Unexpected sensor id(000000), ret(-5) [ +0.000468] ov13850 2-0010: driver version: 00.01.01 [ +0.000019] ov13850 2-0010: could not get module information! [ +0.000039] ov13850 2-0010: GPIO lookup for consumer reset [ +0.000012] ov13850 2-0010: using device tree for GPIO lookup [ +0.000040] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff120000/ov13850@10[0]' - status (0) [ +0.000038] ov13850 2-0010: GPIO lookup for consumer pwdn [ +0.000012] ov13850 2-0010: using device tree for GPIO lookup [ +0.000038] of_get_named_gpiod_flags: parsed 'pwdn-gpios' property of node '/i2c@ff120000/ov13850@10[0]' - status (0) [ +0.000033] ov13850 2-0010: Looking up avdd-supply from device tree [ +0.000015] ov13850 2-0010: Looking up avdd-supply property in node /i2c@ff120000/ov13850@10 failed [ +0.000027] 2-0010 supply avdd not found, using dummy regulator [ +0.000058] ov13850 2-0010: Looking up dovdd-supply from device tree [ +0.000014] ov13850 2-0010: Looking up dovdd-supply property in node /i2c@ff120000/ov13850@10 failed [ +0.000022] 2-0010 supply dovdd not found, using dummy regulator [ +0.000049] ov13850 2-0010: Looking up dvdd-supply from device tree [ +0.000015] ov13850 2-0010: Looking up dvdd-supply property in node /i2c@ff120000/ov13850@10 failed [ +0.000021] 2-0010 supply dvdd not found, using dummy regulator [ +0.003150] ov13850 2-0010: Unexpected sensor id(000000), ret(-5) [ +0.000492] Error: Driver 'sc031gs' is already registered, aborting... [ +0.001323] Registered cp15_barrier emulation handler [ +0.000140] Registered setend emulation handler [ +0.002711] registered taskstats version 1 [ +0.000038] Loading compiled-in X.509 certificates [ +0.003555] Btrfs loaded, integrity-checker=on [ +0.000107] BTRFS: selftest: Running btrfs free space cache tests [ +0.000028] BTRFS: selftest: Running extent only tests [ +0.000024] BTRFS: selftest: Running bitmap only tests [ +0.000026] BTRFS: selftest: Running bitmap and extent tests [ +0.000030] BTRFS: selftest: Running space stealing from bitmap to extent [ +0.001011] BTRFS: selftest: Free space cache tests finished [ +0.000008] BTRFS: selftest: Running extent buffer operation tests [ +0.000007] BTRFS: selftest: Running btrfs_split_item tests [ +0.000053] BTRFS: selftest: Running find delalloc tests [ +0.001457] mmc1: new HS200 MMC card at address 0001 [ +0.001533] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB [ +0.001983] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB [ +0.001046] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB [ +0.001123] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB [ +0.002187] mmcblk1: p1 p2 p3 p4 [ +0.340596] BTRFS: selftest: Running btrfs_get_extent tests [ +0.000204] BTRFS: selftest: Running hole first btrfs_get_extent test [ +0.000033] BTRFS: selftest: Running outstanding_extents tests [ +0.000050] BTRFS: selftest: Running qgroup tests [ +0.000007] BTRFS: selftest: Qgroup basic add [ +0.000053] BTRFS: selftest: Qgroup multiple refs test [ +0.048580] Key type encrypted registered [ +0.001210] rga2: Driver loaded successfully ver:3.02 [ +0.000510] rga2: Module initialized. [ +0.000451] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_rga-supply from device tree [ +0.000037] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_rga-supply property in node /power-management@ff310000/power-controller failed [ +0.000511] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree [ +0.001091] phy phy-ff770000.syscon:usb2-phy@e450.7: Looking up phy-supply from device tree [ +0.000018] phy phy-ff770000.syscon:usb2-phy@e450.7: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed [ +0.000124] phy phy-ff770000.syscon:usb2-phy@e450.7: Looking up vbus-supply from device tree [ +0.000010] phy phy-ff770000.syscon:usb2-phy@e450.7: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed [ +0.000020] phy phy-ff770000.syscon:usb2-phy@e450.7: Failed to get VBUS supply regulator [ +0.001831] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree [ +0.000012] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed [ +0.000092] phy phy-ff7c0000.phy.9: Looking up phy-supply from device tree [ +0.000010] phy phy-ff7c0000.phy.9: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed [ +0.000203] [drm] Rockchip DRM driver version: v1.0.1 [ +0.000321] rockchip-drm display-subsystem: defer getting devfreq [ +0.000314] rockchip-vop ff900000.vop: missing rockchip,grf property [ +0.000216] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008c68818) [ +0.000043] rockchip-vop ff8f0000.vop: missing rockchip,grf property [ +0.000145] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008c68818) [ +0.000229] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [ +0.003137] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008c5d890) [ +0.000091] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ +0.000018] [drm] No driver support for vblank timestamp query. [ +0.000620] rockchip-drm display-subsystem: failed to parse loader memory [ +0.000073] rockchip-drm display-subsystem: No connectors reported connected with modes [ +0.000095] [drm] Cannot find any crtc or sizes - going 1024x768 [ +0.013862] Console: switching to colour frame buffer device 128x48 [ +0.005016] rockchip-drm display-subsystem: fb0: frame buffer device [ +0.006449] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller [ +0.000625] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3 [ +0.000274] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010 [ +0.000109] xhci-hcd xhci-hcd.7.auto: irq 231, io mem 0xfe800000 [ +0.000573] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ +0.000030] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0.000023] usb usb3: Product: xHCI Host Controller [ +0.000023] usb usb3: Manufacturer: Linux 4.4.213-rk3399 xhci-hcd [ +0.000023] usb usb3: SerialNumber: xhci-hcd.7.auto [ +0.001550] hub 3-0:1.0: USB hub found [ +0.000046] hub 3-0:1.0: 1 port detected [ +0.000387] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller [ +0.000363] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4 [ +0.000093] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ +0.000140] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ +0.000014] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0.000013] usb usb4: Product: xHCI Host Controller [ +0.000011] usb usb4: Manufacturer: Linux 4.4.213-rk3399 xhci-hcd [ +0.000012] usb usb4: SerialNumber: xhci-hcd.7.auto [ +0.000671] hub 4-0:1.0: USB hub found [ +0.000039] hub 4-0:1.0: 1 port detected [ +0.002435] xhci-hcd xhci-hcd.7.auto: remove, state 1 [ +0.000034] usb usb4: USB disconnect, device number 1 [ +0.004728] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller [ +0.011767] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microseconds. [ +0.000011] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting reset. [ +0.000059] xhci-hcd xhci-hcd.7.auto: USB bus 4 deregistered [ +0.000067] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5 [ +0.000158] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010 [ +0.000041] xhci-hcd xhci-hcd.8.auto: irq 232, io mem 0xfe900000 [ +0.000193] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ +0.000010] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0.000008] usb usb5: Product: xHCI Host Controller [ +0.000008] usb usb5: Manufacturer: Linux 4.4.213-rk3399 xhci-hcd [ +0.000007] usb usb5: SerialNumber: xhci-hcd.8.auto [ +0.000375] hub 5-0:1.0: USB hub found [ +0.000026] hub 5-0:1.0: 1 port detected [ +0.000221] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller [ +0.000550] xhci-hcd xhci-hcd.7.auto: remove, state 1 [ +0.000040] usb usb3: USB disconnect, device number 1 [ +0.000075] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 6 [ +0.001045] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ +0.000061] xhci-hcd xhci-hcd.7.auto: USB bus 3 deregistered [ +0.000116] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ +0.000015] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0.000012] usb usb6: Product: xHCI Host Controller [ +0.000013] usb usb6: Manufacturer: Linux 4.4.213-rk3399 xhci-hcd [ +0.000011] usb usb6: SerialNumber: xhci-hcd.8.auto [ +0.000799] hub 6-0:1.0: USB hub found [ +0.000042] hub 6-0:1.0: 1 port detected [ +0.005069] ehci-platform fe380000.usb: EHCI Host Controller [ +0.000386] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 3 [ +0.000153] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000 [ +0.008751] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 [ +0.000325] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ +0.000020] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0.000017] usb usb3: Product: EHCI Host Controller [ +0.000016] usb usb3: Manufacturer: Linux 4.4.213-rk3399 ehci_hcd [ +0.000016] usb usb3: SerialNumber: fe380000.usb [ +0.000973] hub 3-0:1.0: USB hub found [ +0.000059] hub 3-0:1.0: 1 port detected [ +0.001056] vendor storage:20190527 ret = 0 [ +0.000417] ohci-platform fe3a0000.usb: Generic Platform OHCI controller [ +0.000462] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 4 [ +0.000242] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000 [ +0.061031] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ +0.000041] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0.000025] usb usb4: Product: Generic Platform OHCI controller [ +0.000024] usb usb4: Manufacturer: Linux 4.4.213-rk3399 ohci_hcd [ +0.000023] usb usb4: SerialNumber: fe3a0000.usb [ +0.001667] hub 4-0:1.0: USB hub found [ +0.000119] hub 4-0:1.0: 1 port detected [ +0.001850] input: adc-keys as /devices/platform/adc-keys/input/input1 [ +0.003226] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode. [ +0.000084] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller. [ +0.000034] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a [ +0.000067] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo [ +0.000060] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated. [ +0.000032] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree [ +0.000030] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed [ +0.000073] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree [ +0.000029] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed [ +0.000047] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found [ +0.000021] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found [ +0.000041] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp [ +0.000023] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup [ +0.000029] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]' [ +0.000027] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]' [ +0.000023] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup [ +0.000025] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed [ +0.000545] platform sdio-pwrseq: GPIO lookup for consumer reset [ +0.000024] platform sdio-pwrseq: using device tree for GPIO lookup [ +0.000077] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0) [ +0.000077] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq [ +0.015007] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ +0.015875] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized [ +0.000742] rockchip-dmc dmc: Looking up center-supply from device tree [ +0.000386] rockchip-dmc dmc: Failed to get leakage [ +0.000050] rockchip-dmc dmc: Looking up center-supply from device tree [ +0.000032] vdd_center: could not add device link dmc err -17 [ +0.000014] vdd_center: Failed to create debugfs directory [ +0.000013] rockchip-dmc dmc: Failed to get pvtm [ +0.000539] rockchip-dmc dmc: avs=0 [ +0.000044] rockchip-dmc dmc: failed to get vop pn to msch rl [ +0.001285] rockchip-dmc dmc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 [ +0.000031] rockchip-dmc dmc: could not find power_model node [ +0.004180] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/rt5651-sound[0]' [ +0.000016] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/rt5651-sound[0]' [ +0.018873] asoc-simple-card rt5651-sound: rt5651-aif1 <-> ff890000.i2s mapping ok [ +0.000100] asoc-simple-card rt5651-sound: ASoC: no source widget found for MICBIAS1 [ +0.000019] asoc-simple-card rt5651-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack [ +0.000333] rt5651 1-001a: ASoC: mux INL1 Mux has no paths [ +0.000029] rt5651 1-001a: ASoC: mux INR1 Mux has no paths [ +0.000025] rt5651 1-001a: ASoC: mux INL2 Mux has no paths [ +0.000025] rt5651 1-001a: ASoC: mux INR2 Mux has no paths [ +0.007796] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]' [ +0.000033] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]' [ +0.000951] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok [ +0.003935] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]' [ +0.000033] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]' [ +0.000588] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0 [ +0.000036] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22 [ +0.000019] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22 [ +0.000016] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22 [ +0.000316] asoc-simple-card: probe of spdif-sound failed with error -22 [ +0.000381] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_edp-supply from device tree [ +0.000026] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_edp-supply property in node /power-management@ff310000/power-controller failed [ +0.000103] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_gpu-supply from device tree [ +0.000022] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_gpu-supply property in node /power-management@ff310000/power-controller failed [ +0.000079] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_iep-supply from device tree [ +0.000022] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_iep-supply property in node /power-management@ff310000/power-controller failed [ +0.000256] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.22 (r-20191105-2)(20191120-1) [ +0.000016] ======== dhd_wlan_init_plat_data ======== [ +0.000009] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter [ +0.000012] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=72, oob_irq_flags=0x414 [ +0.000007] dhd_wlan_init_gpio: WL_REG_ON=-1 [ +0.000007] dhd_wifi_platform_load: Enter [ +0.000007] Power-up adapter 'DHD generic adapter' [ +0.000051] wifi_platform_set_power = 1 [ +0.000006] ======== PULL WL_REG_ON(-1) HIGH! ======== [ +0.000007] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ +0.000008] [WLAN_RFKILL]: wifi turn on power. -1 [ +0.000818] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button@0[0]' - status (0) [ +0.000089] gpio-5 (GPIO Key Power): gpiod_set_debounce: missing set() or set_debounce() operations [ +0.000429] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ +0.008953] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ +0.001605] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ +0.001603] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ +0.002862] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ +0.003401] mmc2: queuing unknown CIS tuple 0x81 (9 bytes) [ +0.052873] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ +0.028758] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:11 UTC (1358499011) [ +0.000026] of_cfs_init [ +0.000109] of_cfs_init: OK [ +0.029945] PM: Hibernation image not present or could not be loaded. [ +0.000055] vcc_sd: disabling [ +0.000014] vcc_lcd: disabling [ +0.000108] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp1-supply from device tree [ +0.000023] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp1-supply property in node /power-management@ff310000/power-controller failed [ +0.000177] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp0-supply from device tree [ +0.000018] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp0-supply property in node /power-management@ff310000/power-controller failed [ +0.000088] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vopb-supply from device tree [ +0.000017] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vopb-supply property in node /power-management@ff310000/power-controller failed [ +0.000086] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vopl-supply from device tree [ +0.000017] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vopl-supply property in node /power-management@ff310000/power-controller failed [ +0.000062] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vo-supply from device tree [ +0.000017] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vo-supply property in node /power-management@ff310000/power-controller failed [ +0.000058] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vdu-supply from device tree [ +0.000016] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vdu-supply property in node /power-management@ff310000/power-controller failed [ +0.000072] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vcodec-supply from device tree [ +0.000016] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vcodec-supply property in node /power-management@ff310000/power-controller failed [ +0.001258] ALSA device list: [ +0.000011] #0: Dummy 1 [ +0.000009] #1: Loopback 1 [ +0.000008] #2: realtek,rt5651-codec [ +0.000009] #3: rockchip,hdmi [ +0.000892] Freeing unused kernel memory: 1088K [ +0.031827] usb 3-1: new high-speed USB device number 2 using ehci-platform [ +0.047099] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 181 [ +0.007013] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ +0.000080] mmc2: new ultra high speed SDR104 SDIO card at address 0001 [ +0.081664] wifi_platform_bus_enumerate device present 1 [ +0.000017] ======== Card detection to detect SDIO card! ======== [ +0.000010] mmc2:mmc host rescan start! [ +0.003074] usb 3-1: New USB device found, idVendor=32e4, idProduct=9520 [ +0.000025] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000011] usb 3-1: Product: HD USB Camera [ +0.000010] usb 3-1: Manufacturer: HD Camera Manufacturer [ +0.001448] uvcvideo: Found UVC 1.00 device HD USB Camera (32e4:9520) [ +0.011558] bcmsdh_register: register client driver [ +0.000227] bcmsdh_sdmmc_probe: Enter num=1 [ +0.000107] bcmsdh_sdmmc_probe: Enter num=2 [ +0.000010] bus num (host idx)=2, slot num (rca)=1 [ +0.000010] found adapter info 'DHD generic adapter' [ +0.000038] sdioh_attach: set sd_f2_blocksize 256 [ +0.000029] sdioh_attach: sd clock rate = 0 [ +0.000155] dhdsdio_probe : no mutex held. set lock [ +0.000083] F1 signature read @0x18000000=0x15294345 [ +0.002645] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2 [ +0.000474] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ +0.000115] [dhd] dhd_conf_set_chiprev : chip=0x4345, chiprev=9 [ +0.000220] [dhd] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211 [ +0.000491] [dhd] CFG80211-ERROR) wl_setup_wiphy : SAE support [ +0.000941] [dhd] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile [ +0.000799] dhd_attach(): thread:dhd_watchdog_thread:e5 started [ +0.000217] dhd_attach(): thread:dhd_dpc:e6 started [ +0.000155] dhd_attach(): thread:dhd_rxf:e7 started [ +0.000017] dhd_deferred_work_init: work queue initialized [ +0.000010] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2 [ +0.000043] dhd_bus_set_default_min_res_mask: Unhandled chip id [ +0.000178] sdioh_cis_read: func_cis_ptr[0]=0x10ac [ +0.005676] Dongle Host Driver, version 1.579.77.41.22 (r-20191105-2)(20191120-1) [ +0.000890] Register interface [wlan0] MAC: 10:2c:6b:16:bd:a4 [ +0.000183] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 0 [ +0.000019] dhd_wl_ioctl: returning as busstate=0 [ +0.000010] dhd_dbg_detach_pkt_monitor, 2204 [ +0.000011] dhd_bus_devreset: == Power OFF == [ +0.000211] bcmsdh_oob_intr_unregister: Enter [ +0.000008] bcmsdh_oob_intr_unregister: irq is not registered [ +0.000016] dhd_txglom_enable: enable 0 [ +0.000008] dhd_bus_devreset: WLAN OFF DONE [ +0.000034] wifi_platform_set_power = 0 [ +0.000009] ======== PULL WL_REG_ON(-1) LOW! ======== [ +0.000008] [WLAN_RFKILL]: rockchip_wifi_power: 0 [ +0.000026] [WLAN_RFKILL]: wifi shut off power. [ +0.000011] dhdsdio_probe : the lock is released. [ +0.000196] dhd_module_init: Exit err=0 [ +0.316810] EXT4-fs (mmcblk1p1): INFO: recovery required on readonly filesystem [ +0.000013] EXT4-fs (mmcblk1p1): write access will be enabled during recovery [ +0.015828] EXT4-fs (mmcblk1p1): recovery complete [ +0.001288] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null) [ +0.191124] systemd[1]: System time before build time, advancing clock. [ +0.007280] ip_tables: (C) 2000-2006 Netfilter Core Team [ +0.002210] cgroup: cgroup2: unknown option "nsdelegate" [ +0.003313] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ +0.000443] systemd[1]: Detected architecture arm64. [ +0.004963] systemd[1]: Set hostname to <nanopim4>. [ +0.116408] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ +0.000018] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ +0.056596] systemd[1]: /lib/systemd/system/rk3399-bluetooth.service:10: Support for option SysVStartPriority= has been removed and it is ignored [ +0.009162] systemd[1]: /etc/systemd/system/serial-getty@.service.d/override.conf:5: Unknown lvalue 'After' in section 'Service', ignoring [ +0.002520] systemd[1]: /etc/systemd/system/getty@.service.d/override.conf:5: Unknown lvalue 'After' in section 'Service', ignoring [ +0.029931] random: systemd: uninitialized urandom read (16 bytes read, 83 bits of entropy available) [ +0.010076] random: systemd: uninitialized urandom read (16 bytes read, 83 bits of entropy available) [ +0.001169] systemd[1]: Created slice User and Session Slice. [ +0.000424] random: systemd: uninitialized urandom read (16 bytes read, 83 bits of entropy available) [ +0.000300] systemd[1]: Listening on Syslog Socket. [ +0.000207] random: systemd: uninitialized urandom read (16 bytes read, 83 bits of entropy available) [ +0.000228] systemd[1]: Listening on Journal Socket (/dev/log). [ +0.000349] random: systemd: uninitialized urandom read (16 bytes read, 83 bits of entropy available) [ +0.000135] systemd[1]: Listening on Journal Audit Socket. [ +0.000184] random: systemd: uninitialized urandom read (16 bytes read, 83 bits of entropy available) [ +0.000166] systemd[1]: Listening on udev Kernel Socket. [ +0.000187] random: systemd: uninitialized urandom read (16 bytes read, 83 bits of entropy available) [ +0.000032] systemd[1]: Reached target Remote File Systems. [ +0.000192] random: systemd: uninitialized urandom read (16 bytes read, 83 bits of entropy available) [ +0.000218] systemd[1]: Listening on Journal Socket. [ +0.000186] random: systemd: uninitialized urandom read (16 bytes read, 83 bits of entropy available) [ +0.002521] systemd[1]: Starting Nameserver information manager... [ +0.000872] random: systemd: uninitialized urandom read (16 bytes read, 83 bits of entropy available) [ +0.002556] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ +0.010121] systemd[1]: Mounting POSIX Message Queue File System... [ +0.004471] systemd[1]: Starting Load Kernel Modules... [ +0.003760] systemd[1]: Mounting Huge Pages File System... [ +0.004380] systemd[1]: Starting Set the console keyboard layout... [ +0.001194] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ +0.004219] systemd[1]: Starting Restore / save the current clock... [ +0.000565] systemd[1]: Reached target Slices. [ +0.001185] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ +0.001106] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ +0.000485] systemd[1]: Listening on fsck to fsckd communication Socket. [ +0.001353] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ +0.003675] systemd[1]: Starting File System Check on Root Device... [ +0.001391] systemd[1]: Listening on udev Control Socket. [ +0.006845] systemd[1]: Starting udev Coldplug all Devices... [ +0.003359] systemd[1]: Created slice system-serial\x2dgetty.slice. [ +0.000489] systemd[1]: Reached target Swap. [ +0.004591] systemd[1]: Mounting Kernel Debug File System... [ +0.001495] systemd[1]: Created slice system-getty.slice. [ +0.001470] systemd[1]: Listening on initctl Compatibility Named Pipe. [ +0.000461] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ +0.000091] systemd[1]: Reached target Local Encrypted Volumes. [ +0.000258] systemd[1]: Reached target Paths. [ +0.008869] systemd[1]: Started Create list of required static device nodes for the current kernel. [ +0.005697] systemd[1]: Mounted POSIX Message Queue File System. [ +0.000792] systemd[1]: Mounted Huge Pages File System. [ +0.000648] systemd[1]: Mounted Kernel Debug File System. [ +0.004725] systemd[1]: Started Load Kernel Modules. [ +0.004250] systemd[1]: Started Nameserver information manager. [ +0.003910] systemd[1]: Started Restore / save the current clock. [ +0.005528] systemd[1]: Started File System Check Daemon to report status. [ +0.006497] systemd[1]: Mounting FUSE Control File System... [ +0.005492] systemd[1]: Mounting Kernel Configuration File System... [ +0.006541] systemd[1]: Starting Apply Kernel Variables... [ +0.013998] systemd[1]: Mounted FUSE Control File System. [ +0.004813] systemd[1]: Started File System Check on Root Device. [ +0.002304] systemd[1]: Mounted Kernel Configuration File System. [ +0.009110] systemd[1]: Starting Remount Root and Kernel File Systems... [ +0.011769] systemd[1]: Started Apply Kernel Variables. [ +0.032612] EXT4-fs (mmcblk1p1): re-mounted. Opts: acl,commit=600,errors=remount-ro [ +0.006042] systemd[1]: Started Remount Root and Kernel File Systems. [ +0.004717] systemd[1]: Starting Load/Save Random Seed... [ +0.004871] systemd[1]: Starting Create System Users... [ +0.002590] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ +0.019984] systemd[1]: Started Load/Save Random Seed. [ +0.019415] systemd[1]: Started Create System Users. [ +0.004529] systemd[1]: Starting Create Static Device Nodes in /dev... [ +0.032607] systemd[1]: Started udev Coldplug all Devices. [ +0.005483] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ +0.003175] systemd[1]: Started Set the console keyboard layout. [ +0.014690] systemd[1]: Started Helper to synchronize boot up for ifupdown. [ +0.006938] systemd[1]: Started Create Static Device Nodes in /dev. [ +0.004987] systemd[1]: Reached target Local File Systems (Pre). [ +0.008051] systemd[1]: Mounting /tmp... [ +0.008264] systemd[1]: Starting udev Kernel Device Manager... [ +0.007716] systemd[1]: Mounted /tmp. [ +0.034968] systemd[1]: Started udev Kernel Device Manager. [ +0.068858] dhd_ioctl_entry: Interface is down [ +0.109362] dhd_ioctl_entry: Interface is down [ +0.056264] mali ff9a0000.gpu: Looking up mali-supply from device tree [ +0.002310] mali ff9a0000.gpu: leakage=27 [ +0.000066] mali ff9a0000.gpu: Looking up mali-supply from device tree [ +0.000037] vdd_gpu: could not add device link ff9a0000.gpu err -17 [ +0.000012] vdd_gpu: Failed to create debugfs directory [ +0.016830] mali ff9a0000.gpu: temp=60625, pvtm=122848 (122620 + 228) [ +0.000918] mali ff9a0000.gpu: pvtm-volt-sel=1 [ +0.000491] mali ff9a0000.gpu: avs=0 [ +0.002504] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0 [ +0.000198] mali ff9a0000.gpu: Protected mode not available [ +0.000577] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 [ +0.000048] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model [ +0.000131] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 423; [Func] : kbase_devfreq_init(); success initing power_model_simple. [ +0.001547] mali ff9a0000.gpu: Probed as mali0 [ +0.048605] systemd[1]: Found device /dev/disk/by-label/DATA. [ +0.066066] systemd[1]: Found device /dev/disk/by-label/HOME. [ +0.054366] systemd[1]: Found device /dev/ttyFIQ0. [ +0.043042] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ +0.001566] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ +0.000065] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ +0.000041] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ +0.002522] systemd[1]: Starting File System Check on /dev/disk/by-label/HOME... [ +0.004640] systemd[1]: Starting File System Check on /dev/disk/by-label/DATA... [ +0.002957] systemd[1]: Created slice system-systemd\x2dbacklight.slice. [ +0.005142] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:backlight... [ +0.006596] systemd[1]: Starting Load/Save RF Kill Switch Status... [ +0.021854] systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:backlight. [ +0.028501] [BT_RFKILL]: ENABLE UART_RTS [ +0.021412] systemd[1]: Started File System Check on /dev/disk/by-label/HOME. [ +0.011279] systemd[1]: Mounting /root... [ +0.010031] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: acl [ +0.007812] systemd[1]: Mounted /root. [ +0.041286] random: nonblocking pool is initialized [ +0.016155] [BT_RFKILL]: DISABLE UART_RTS [ +0.000045] [BT_RFKILL]: bt turn on power [ +0.002904] systemd[1]: Started Load/Save RF Kill Switch Status. [ +0.018578] systemd[1]: Started File System Check on /dev/disk/by-label/DATA. [ +0.016184] systemd[1]: Mounting /root/mvisia_edge_data... [ +0.006594] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: acl [ +0.005873] systemd[1]: Mounted /root/mvisia_edge_data. [ +0.005549] systemd[1]: Reached target Local File Systems. [ +0.008532] systemd[1]: Starting Set console font and keymap... [ +0.002877] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped. [ +0.002582] systemd[1]: Starting Raise network interfaces... [ +0.005109] systemd[1]: Starting Armbian ZRAM config... [ +0.001845] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ +0.001727] systemd[1]: Started Set console font and keymap. [ +0.127075] zram: Added device: zram0 [ +0.002007] zram: Added device: zram1 [ +0.001427] zram: Added device: zram2 [ +0.061455] systemd[1]: Started Raise network interfaces. [ +0.000698] zram1: detected capacity change from 0 to 1009115136 [ +0.023624] Adding 985460k swap on /dev/zram1. Priority:5 extents:1 across:985460k SS [ +0.089687] zram0: detected capacity change from 0 to 52428800 [ +0.028980] systemd[1]: Started Armbian ZRAM config. [ +0.013912] systemd[1]: Starting Armbian memory supported logging... [ +0.053579] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard [ +1.600622] cfg80211: World regulatory domain updated: [ +0.000017] cfg80211: DFS Master region: unset [ +0.000006] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ +0.000008] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ +0.000006] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ +0.000005] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ +0.000005] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ +0.000005] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ +0.000005] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ +0.000005] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ +0.000005] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ +0.330948] systemd[1]: Started Armbian memory supported logging. [ +0.004278] systemd[1]: Starting Journal Service... [ +0.211269] systemd[1]: Started Journal Service. [ +0.038392] systemd-journald[660]: Received request to flush runtime journal from PID 1 [ +1.180768] nr_pdflush_threads exported in /proc is scheduled for removal [ +4.139288] [BT_RFKILL]: ENABLE UART_RTS [ +0.101548] [BT_RFKILL]: DISABLE UART_RTS [ +0.000065] [BT_RFKILL]: bt turn on power [ +0.060274] ttyS0 - failed to request DMA, use interrupt mode [ +0.697800] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ +0.010796] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ +0.000123] dhd_open: Enter ffffffc07458f000 [ +0.000005] dhd_open : no mutex held. set lock [ +0.000008] Dongle Host Driver, version 1.579.77.41.22 (r-20191105-2)(20191120-1) [ +0.000012] [dhd-wlan0] wl_android_wifi_on : in g_wifi_on=0 [ +0.000006] wifi_platform_set_power = 1 [ +0.000005] ======== PULL WL_REG_ON(-1) HIGH! ======== [ +0.000006] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ +0.000007] [WLAN_RFKILL]: wifi turn on power. -1 [ +0.303089] sdio_reset_comm(): [ +0.031886] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ +0.023597] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ +0.063895] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ +0.006795] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ +0.006063] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ +0.010933] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ +0.013545] mmc2: queuing unknown CIS tuple 0x81 (9 bytes) [ +0.203094] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ +0.128876] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 181 [ +0.000050] sdioh_start: set sd_f2_blocksize 256 [ +0.000254] dhd_bus_devreset: == WLAN ON == [ +0.000066] F1 signature read @0x18000000=0x15294345 [ +0.002360] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2 [ +0.000449] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ +0.000097] dhd_bus_set_default_min_res_mask: Unhandled chip id [ +0.000809] dhd_os_open_image: /lib/firmware/rkwifi/config.txt (204 bytes) open success [ +0.000448] [dhd] dhd_conf_read_country : ccode = ALL [ +0.000011] [dhd] dhd_conf_read_country : regrev = 0 [ +0.000012] [dhd] dhd_conf_read_sdio_params : dhd_doflow = 1 [ +0.000018] [dhd] dhd_conf_read_others : srl = 15 [ +0.000010] [dhd] dhd_conf_read_others : lrl = 15 [ +0.000019] [dhd] dhd_conf_set_path_params : Final fw_path=/lib/firmware/rkwifi/fw_bcm43456c5_ag.bin [ +0.000007] [dhd] dhd_conf_set_path_params : Final nv_path=/lib/firmware/rkwifi/nvram_ap6256.txt [ +0.000006] [dhd] dhd_conf_set_path_params : Final clm_path=/lib/firmware/rkwifi/clm_bcm43456c5_ag.blob [ +0.000005] [dhd] dhd_conf_set_path_params : Final conf_path=/lib/firmware/rkwifi/config.txt [ +0.000337] dhd_os_open_image: /lib/firmware/rkwifi/fw_bcm43456c5_ag.bin (585884 bytes) open success [ +0.050686] dhd_os_open_image: /lib/firmware/rkwifi/nvram_ap6256.txt (2099 bytes) open success [ +0.000441] NVRAM version: AP6256_NVRAM_V1.1_08252017 [ +0.000506] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ +0.074738] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ +0.000279] bcmsdh_oob_intr_register: HW_OOB irq=72 flags=0x4 [ +0.000202] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist [ +0.000010] dhd_get_memdump_info: MEMDUMP ENABLED = 2 [ +0.000756] Disable tdls_auto_op failed. -1 [ +0.000013] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 1 [ +0.000289] dhd_apply_default_clm: Ignore clm file /lib/firmware/rkwifi/clm_bcm43456c5_ag.blob [ +0.001399] Firmware up: op_mode=0x0005, MAC=10:2c:6b:16:bd:a4 [ +0.002907] dhd_preinit_ioctls Set scancache failed -23 [ +0.007609] Driver: 1.579.77.41.22 (r-20191105-2)(20191120-1) Firmware: wl0: Feb 11 2020 11:54:51 version 7.45.96.61 (be7af2d@shgit) (r745790) FWID 01-a41d86bd es7.c5.n4.a3 CLM: 9.2.9 (2016-02-03 04:34:31) [ +0.000208] dhd_txglom_enable: enable 1 [ +0.000007] [dhd] dhd_conf_set_txglom_params : txglom_mode=copy [ +0.000007] [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0 [ +0.000006] [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1 [ +0.000006] [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300 [ +0.000011] [dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1 [ +0.000813] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 [ +0.001276] dhd_pno_init: Support Android Location Service [ +0.020085] [dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created [ +0.000709] dhd_rtt_init : FTM is supported [ +0.000010] dhd_preinit_ioctls: SensorHub diabled 0 [ +0.000583] dhd_preinit_ioctls failed to set ShubHub disable [ +0.001345] dhd_wl_ioctl_get_intiovar: get int iovar wnm_bsstrans_resp failed, ERR -23 [ +0.000005] failed to get wnm_bsstrans_resp [ +0.000468] failed to set WNM capabilities [ +0.000223] [dhd] dhd_conf_set_country : set country ALL, revision 0 [ +0.000007] [dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created [ +0.000364] [dhd] CONFIG-ERROR) dhd_conf_set_bufiovar : country setting failed -2, len=12 [ +0.000313] [dhd] dhd_conf_set_country : Country code: US (US/0) [ +0.005271] [dhd-wlan0] wl_android_wifi_on : Success [ +0.043276] dhd_open : the lock is released. [ +0.000018] dhd_open: Exit ret=0 [ +0.064965] NET: Registered protocol family 17 [ +0.092172] P2P interface registered [ +0.000026] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc07a377800, wdev->net: (null) [ +0.015296] WLC_E_IF: NO_IF set, event Ignored [ +0.000913] P2P interface started [ +3.208246] Bluetooth: Core ver 2.21 [ +0.000118] NET: Registered protocol family 31 [ +0.000020] Bluetooth: HCI device and connection manager initialized [ +0.000031] Bluetooth: HCI socket layer initialized [ +0.000024] Bluetooth: L2CAP socket layer initialized [ +0.001439] Bluetooth: SCO socket layer initialized [ +0.014957] Bluetooth: HCI UART driver ver 2.3 [ +0.000028] Bluetooth: HCI UART protocol H4 registered [ +0.000018] Bluetooth: HCI UART protocol LL registered [ +0.000015] Bluetooth: HCI UART protocol ATH3K registered [ +0.000015] Bluetooth: HCI UART protocol Three-wire (H5) registered [ +0.000489] Bluetooth: HCI UART protocol Intel registered [ +0.000373] Bluetooth: HCI UART protocol BCM registered [ +0.000018] Bluetooth: HCI UART protocol QCA registered [ +0.104720] tty_port_close_start: tty->count = 1 port count = 2. [ +0.609035] [dhd-wlan0] wl_cfg80211_connect : Connecting with d8:47:32:72:3d:c4 ssid "FT Home3", len (8), sec=wpa2psk/mfpc/518, channel=6 [ +0.000983] dhd_dbg_start_pkt_monitor, 1724 [Feb24 19:14] [dhd-wlan0] wl_iw_event : Link UP with d8:47:32:72:3d:c4 [ +0.000032] [dhd-wlan0] wl_ext_iapsta_event : [S] Link UP with d8:47:32:72:3d:c4 [ +0.000032] [dhd-wlan0] wl_notify_connect_status : wl_bss_connect_done succeeded with d8:47:32:72:3d:c4 [ +0.092481] [dhd-wlan0] wl_notify_connect_status : wl_bss_connect_done succeeded with d8:47:32:72:3d:c4 vndr_oui: 8C-FD-F0 [ +0.400843] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ +2.324580] capability: warning: `python3' uses 32-bit capabilities (legacy support in use) [ +0.122108] gpio-54 (sysfs): gpiod_request: status -16 [ +0.000013] export_store: status -16 [ +0.017301] gpio-55 (sysfs): gpiod_request: status -16 [ +0.000012] export_store: status -16 [ +0.017416] gpio-145 (sysfs): gpiod_request: status -16 [ +0.000013] export_store: status -16 [ +0.000213] gpio-144 (sysfs): gpiod_request: status -16 [ +0.000005] export_store: status -16 [ +2.793376] gpio-54 (sysfs): gpiod_request: status -16 [ +0.000013] export_store: status -16 [ +0.034051] gpio-55 (sysfs): gpiod_request: status -16 [ +0.000021] export_store: status -16 [ +0.024398] gpio-145 (sysfs): gpiod_request: status -16 [ +0.000013] export_store: status -16 [ +0.000203] gpio-144 (sysfs): gpiod_request: status -16 [ +0.000006] export_store: status -16 [ +0.000113] gpio-149 (sysfs): gpiod_request: status -16 [ +0.000005] export_store: status -16 [ +0.000113] gpio-33 (sysfs): gpiod_request: status -16 [ +0.000005] export_store: status -16 [ +0.000097] gpio-50 (sysfs): gpiod_request: status -16 [ +0.000004] export_store: status -16 [ +0.000098] gpio-35 (sysfs): gpiod_request: status -16 [ +0.000005] export_store: status -16 [ +3.198805] tty_port_close_start: tty->count = 1 port count = 2. [ +0.340160] tty_port_close_start: tty->count = 1 port count = 2.

Stuttering audio when sending to bluetooth receiver via bluealsa

rcr replied to rcr's topic in Allwinner sunxi

As long as I didn't get any suggestion I came to idea to try to update my bluetooth module's firmware which I guess a bit old right now: [ 16.278794] [ap6210] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin [ 16.284490] [ap6210] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt [ 16.307198] [ap6210] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin [ 16.665709] [ap6210] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=ac:83:f3:a8:72:fd [ 16.735412] [ap6210] Firmware version = wl0: Mar 10 2014 14:59:50 version 5.9 I found this https://github.com/armbian/firmware/tree/master/ap6210 which I think is what I need. Can anyone tell me how do I perform a firmware update?

Creating access point on Orange Pi Zero Plus 2

rednoka posted a topic in Orange Pi Zero

I am not experienced on the Linux networking so please tolerate my ignorance. 1.) I am trying to create an wireless access point on "Orange Pi Zero Plus 2 H3" board. And I fail... 2.) I am using Armbian image: Armbian_5.76_Orangepizeroplus2-h3_Ubuntu_xenial_next_4.19.21.img 3.) I am using nmcli for this purpose: https://gist.github.com/narate/d3f001c97e1c981a59f94cd76f041140 nmcli con add type wifi ifname wlan0 con-name MyAccessPoint autoconnect yes ssid MyAccessPoint nmcli con modify MyAccessPoint 802-11-wireless.mode ap 802-11-wireless.band bg ipv4.method shared nmcli con modify MyAccessPoint wifi-sec.key-mgmt wpa-psk nmcli con modify MyAccessPoint wifi-sec.psk "1234567890" nmcli con up MyAccessPoint 4.) When I look at the syslog it fails like: May 22 08:24:52 localhost NetworkManager[738]: <info> [1558513492.3757] Config: added 'key_mgmt' value 'WPA-PSK' May 22 08:24:52 localhost NetworkManager[738]: <info> [1558513492.3758] Config: added 'psk' value '<omitted>' May 22 08:24:52 localhost NetworkManager[738]: <info> [1558513492.3794] sup-iface[0x2dd8d8,wlan0]: config: set interface ap_scan to 2 May 22 08:24:53 localhost wpa_supplicant[1099]: wlan0: Failed to start AP functionality May 22 08:24:53 localhost NetworkManager[738]: <info> [1558513493.4425] device (wlan0): supplicant interface state: inactive -> disconnected 5.) Failed to start AP functionality message is coming from ap.c in wpa_supplicant code: if ( wpa_drv_associate(wpa_s, &params) < 0) { wpa_msg(wpa_s, MSG_INFO, "Failed to start AP functionality"); return -1; } It seems the wpa_supplicant cannot match requested parameters with a wifi driver. 6.) I have read: 7.) When I do: echo 'options dhd op_mode=2' >/etc/modprobe.d/ap6212.conf rmmod dhd && modprobe dhd modeprobe complains: modprobe: FATAL: Module dhd not found in directory /lib/modules/4.19.21-sunxi 8. Lastly; What is "dhd module"? How can I enable it? How can I create a wireless access point? Regards...

Access Point not working

peter12 replied to peter12's topic in Orange Pi Zero

thanks, I found something like this: echo 'options dhd op_mode=2' >/etc/modprobe.d/ap6212.conf rmmod dhd && modprobe dhd but will I be able to switch to client mode anytime? Or another special treatment is needed for this? What I want to achieve is that normally wifi will be used in client mode, but from time to time I want to be able to switch it to AP mode (ideally with nmcli as I showed on the start of thread ) UPDATE: I did: echo 'options dhd op_mode=2' | sudo tee --append /etc/modprobe.d/ap6212.conf sudo rmmod dhd sudo modprobe dhd then: nmcli c add type wifi ifname wlan0 con-name connection-name autoconnect no ssid hotspotssid nmcli connection modify connection-name 802-11-wireless.mode ap 802-11-wireless.band bg ipv4.method shared nmcli connection modify connection-name wifi-sec.key-mgmt wpa-psk nmcli connection modify connection-name wifi-sec.psk "lepassword" nmcli connection up connection-name but access point did not start to work.

Access Point not working

Igor replied to peter12's topic in Orange Pi Zero

https://forum.armbian.com/search/?q=op_mode=2

Access Point not working

Igor replied to peter12's topic in Orange Pi Zero

Older kernel wireless driver (for chip on Opi zero +2) needs to be loaded with op_mode=2 otherwise AP doesn't work.

[hostapd] hostapd cannot work as expected, PLEASE HELP

lemonahmas replied to lemonahmas's topic in Beginners

Thank you for ur reply, And I tried this it worked: rmmod bcmdhd modprobe bcmdhd op_mode=2 AP6212 can only work in client mode or AP mode, it needs to be manualy changed. However, after reboot it won't work, so I guess I have to figure out how to keep this state.

CAM500B not appearing on Nanopi Neo AIR

dmorse posted a topic in Allwinner sunxi

This is on a fresh build of Armbian from source. I'm not seeing the camera appearing in /dev/video0, as you would expect. I've tried the solution that @sri suggested on this thread https://forum.armbian.com/index.php?/topic/3225-nanopi-neo-air-cam500b-issue/ but the device is still not visible. Here is the contents of my /etc/modules file #w1-sunxi #w1-gpio #w1-therm sunxi-cir hci_uart rfcomm hidp dhd g_serial ov5640 vfe_v4l2 And here is the output from dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.113-sun8i (root@crosscompile) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #10 SMP PREEMPT Thu Jul 20 11:40:34 BST 2017 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: sun8i [ 0.000000] cma: CMA: reserved 160 MiB at 56000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c0a7b900, node_mem_map c0c01000 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 129920 pages, LIFO batch:31 [ 0.000000] script_init enter! [ 0.000000] script_init exit! [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1093000 s11968 r8192 d12608 u32768 [ 0.000000] pcpu-alloc: s11968 r8192 d12608 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: root=UUID=0f2fc787-984f-4361-a5eb-3c1c9964b243 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=1833f8f9-01 ubootsource=mmc sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 336300k/336300k available, 187988k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0981220 (9701 kB) [ 0.000000] .init : 0xc0982000 - 0xc09d8ec0 ( 348 kB) [ 0.000000] .data : 0xc09da000 - 0xc0a88fd0 ( 700 kB) [ 0.000000] .bss : 0xc0a89784 - 0xc0c004c0 (1500 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:544 [ 0.000000] Architected local timer running at 24.00MHz. [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.000279] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000) [ 0.000304] pid_max: default: 32768 minimum: 301 [ 0.000479] Security Framework initialized [ 0.000541] AppArmor: AppArmor disabled by boot time parameter [ 0.000743] Mount-cache hash table entries: 512 [ 0.001818] Initializing cgroup subsys cpuacct [ 0.001836] Initializing cgroup subsys memory [ 0.001887] Initializing cgroup subsys devices [ 0.001900] Initializing cgroup subsys freezer [ 0.001911] Initializing cgroup subsys blkio [ 0.001935] Initializing cgroup subsys perf_event [ 0.002029] CPU: Testing write buffer coherency: ok [ 0.002087] ftrace: allocating 25333 entries in 75 pages [ 0.030396] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.030417] [sunxi_smp_prepare_cpus] enter [ 0.030469] Setting up static identity map for 0x4066a498 - 0x4066a4f0 [ 0.031611] CPU1: Booted secondary processor [ 0.031611] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031753] CPU2: Booted secondary processor [ 0.031753] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.040575] CPU3: Booted secondary processor [ 0.040575] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.040697] Brought up 4 CPUs [ 0.040697] SMP: Total of 4 processors activated (19200.00 BogoMIPS). [ 0.041022] devtmpfs: initialized [ 0.052069] wakeup src cnt is : 2. [ 0.052081] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000 [ 0.052092] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0 [ 0.052103] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40 [ 0.052115] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000 [ 0.052125] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8 [ 0.052136] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40 [ 0.052148] sunxi pm init [ 0.052304] pinctrl core: initialized pinctrl subsystem [ 0.059242] NET: Registered protocol family 16 [ 0.062179] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.062275] script_sysfs_init success [ 0.062305] sunxi_dump_init success [ 0.063295] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl [ 0.064509] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver [ 0.064509] plat: add bmp085 device [ 0.064509] plat: add pcf8591 device [ 0.064509] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.064509] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.064509] script config pll_video to 297 Mhz [ 0.064509] script config pll_de to 864 Mhz [ 0.064509] script config pll_ve to 402 Mhz [ 0.064509] sunxi_default_clk_init [ 0.064509] try to set pll6ahb1 to 200000000 [ 0.064509] try to set ahb clk source to pll6ahb1 [ 0.064509] set ahb clk source to pll6ahb1 [ 0.064509] try to set ahb1 to 200000000 [ 0.064509] try to set apb1 to 100000000 [ 0.070263] bio: create slab <bio-0> at 0 [ 0.070342] [ARISC] :sunxi-arisc driver v1.04 [ 0.093850] [ARISC] :arisc version: [v0.1.58] [ 0.200700] [ARISC] :sunxi-arisc driver v1.04 startup succeeded [ 0.202460] SCSI subsystem initialized [ 0.202460] usbcore: registered new interface driver usbfs [ 0.202460] usbcore: registered new interface driver hub [ 0.202460] usbcore: registered new device driver usb [ 0.202460] twi_chan_cfg()340 - [twi0] has no twi_regulator. [ 0.202460] twi_chan_cfg()340 - [twi1] has no twi_regulator. [ 0.202460] twi_chan_cfg()340 - [twi2] has no twi_regulator. [ 0.202460] Linux video capture interface: v2.00 [ 0.202460] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.202460] cfg80211: Calling CRDA to update world regulatory domain [ 0.202460] NetLabel: Initializing [ 0.202460] NetLabel: domain hash size = 128 [ 0.202460] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.202460] NetLabel: unlabeled traffic allowed by default [ 0.202460] Switching to clocksource arch_sys_counter [ 0.214858] FS-Cache: Loaded [ 0.215224] CacheFiles: Loaded [ 0.227056] NET: Registered protocol family 2 [ 0.238355] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.238993] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.239243] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) [ 0.239517] TCP: Hash tables configured (established 16384 bind 16384) [ 0.239529] TCP: reno registered [ 0.239542] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.239568] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.239926] NET: Registered protocol family 1 [ 0.240441] RPC: Registered named UNIX socket transport module. [ 0.240454] RPC: Registered udp transport module. [ 0.240463] RPC: Registered tcp transport module. [ 0.240471] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.240708] Trying to unpack rootfs image as initramfs... [ 0.582081] Freeing initrd memory: 5040K [ 0.582796] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available [ 0.582949] sunxi_reg_init enter [ 0.584027] audit: initializing netlink socket (disabled) [ 0.584094] type=2000 audit(0.580:1): initialized [ 0.585690] VFS: Disk quotas dquot_6.5.2 [ 0.585887] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.586484] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.586709] misc fatfs initialized [ 0.587025] NFS: Registering the id_resolver key type [ 0.587464] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.587479] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.588336] NTFS driver 2.1.30 [Flags: R/W]. [ 0.588650] fuse init (API version 7.18) [ 0.589065] msgmni has been set to 986 [ 0.590722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.590744] io scheduler noop registered [ 0.590753] io scheduler deadline registered [ 0.590819] io scheduler cfq registered (default) [ 0.591311] [DISP]disp_module_init [ 0.591648] cmdline,init_disp= [ 0.591682] cmdline,disp= [ 0.592448] [DISP]disp_module_init finish [ 0.592705] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator. [ 0.592721] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator. [ 0.592736] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator. [ 0.592750] sw_uart_get_devinfo()1503 - uart3 has no uart_regulator. [ 0.593331] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI [ 0.593347] sw_uart_pm()890 - uart0 clk is already enable [ 0.593368] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n [ 0.593514] console [ttyS0] enabled [ 0.593860] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI [ 0.594146] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI [ 0.594450] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI [ 0.595000] sunxi_cmatest_init enter [ 0.595050] sunxi_cmatest_init success [ 0.599313] brd: module loaded [ 0.603369] loop: module loaded [ 0.603699] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator. [ 0.603713] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator. [ 0.604369] spi spi0: master is unqueued, this is deprecated [ 0.604878] gmac0 not be used [ 0.604916] gmac0: probe of gmac0 failed with error -22 [ 0.604948] PPP generic driver version 2.4.2 [ 0.605130] PPP BSD Compression module registered [ 0.605140] PPP Deflate Compression module registered [ 0.608257] PPP MPPE Compression module registered [ 0.608278] NET: Registered protocol family 24 [ 0.608380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.628512] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.628552] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1 [ 0.629662] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000 [ 0.640054] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00 [ 0.640827] hub 1-0:1.0: USB hub found [ 0.640854] hub 1-0:1.0: 1 port detected [ 0.661314] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.661348] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2 [ 0.661792] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000 [ 0.680044] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00 [ 0.680683] hub 2-0:1.0: USB hub found [ 0.680709] hub 2-0:1.0: 1 port detected [ 0.701121] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.701152] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3 [ 0.701600] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000 [ 0.720037] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00 [ 0.720567] hub 3-0:1.0: USB hub found [ 0.720591] hub 3-0:1.0: 1 port detected [ 0.740958] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.740990] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4 [ 0.741383] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000 [ 0.760031] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00 [ 0.760578] hub 4-0:1.0: USB hub found [ 0.760598] hub 4-0:1.0: 1 port detected [ 0.760984] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.781071] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 0.781101] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5 [ 0.781137] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400 [ 0.844578] hub 5-0:1.0: USB hub found [ 0.844601] hub 5-0:1.0: 1 port detected [ 0.864974] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 0.865004] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6 [ 0.865041] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400 [ 0.924604] hub 6-0:1.0: USB hub found [ 0.924626] hub 6-0:1.0: 1 port detected [ 0.945006] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 0.945036] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7 [ 0.945074] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400 [ 1.004626] hub 7-0:1.0: USB hub found [ 1.004649] hub 7-0:1.0: 1 port detected [ 1.025058] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.025090] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8 [ 1.025142] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400 [ 1.084618] hub 8-0:1.0: USB hub found [ 1.084638] hub 8-0:1.0: 1 port detected [ 1.085043] Initializing USB Mass Storage driver... [ 1.085295] usbcore: registered new interface driver usb-storage [ 1.085305] USB Mass Storage support registered. [ 1.085374] usbcore: registered new interface driver ums-alauda [ 1.085428] usbcore: registered new interface driver ums-cypress [ 1.085498] usbcore: registered new interface driver ums-datafab [ 1.085546] usbcore: registered new interface driver ums_eneub6250 [ 1.085593] usbcore: registered new interface driver ums-freecom [ 1.085646] usbcore: registered new interface driver ums-isd200 [ 1.085702] usbcore: registered new interface driver ums-jumpshot [ 1.085752] usbcore: registered new interface driver ums-karma [ 1.085801] usbcore: registered new interface driver ums-onetouch [ 1.085870] usbcore: registered new interface driver ums-realtek [ 1.085929] usbcore: registered new interface driver ums-sddr09 [ 1.085978] usbcore: registered new interface driver ums-sddr55 [ 1.086028] usbcore: registered new interface driver ums-usbat [ 1.086265] uinput result 0 , vmouse_init [ 1.086892] mousedev: PS/2 mouse device common for all mice [ 1.087137] sunxikbd_init failed. [ 1.087975] ls_fetch_sysconfig_para: ls_unused. [ 1.087987] ltr_init: ls_fetch_sysconfig_para err. [ 1.088614] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 [ 1.088674] i2c /dev entries driver [ 1.102754] [ISP] isp platform_id = 5! [ 1.102936] sunxi cedar version 0.1 [ 1.102990] [cedar]: install start!!! [ 1.103253] [cedar]: install end!!! [ 1.103510] twi_start()434 - [i2c0] START can't sendout! [ 1.103777] twi_start()434 - [i2c0] START can't sendout! [ 1.104042] twi_start()434 - [i2c0] START can't sendout! [ 1.104312] twi_start()434 - [i2c0] START can't sendout! [ 1.104577] twi_start()434 - [i2c0] START can't sendout! [ 1.104842] twi_start()434 - [i2c0] START can't sendout! [ 1.105110] twi_start()434 - [i2c0] START can't sendout! [ 1.105375] twi_start()434 - [i2c0] START can't sendout! [ 1.105640] twi_start()434 - [i2c0] START can't sendout! [ 1.105908] twi_start()434 - [i2c0] START can't sendout! [ 1.106173] twi_start()434 - [i2c0] START can't sendout! [ 1.106438] twi_start()434 - [i2c0] START can't sendout! [ 1.106706] twi_start()434 - [i2c0] START can't sendout! [ 1.106971] twi_start()434 - [i2c0] START can't sendout! [ 1.107236] twi_start()434 - [i2c0] START can't sendout! [ 1.107504] twi_start()434 - [i2c0] START can't sendout! [ 1.107769] twi_start()434 - [i2c0] START can't sendout! [ 1.108034] twi_start()434 - [i2c0] START can't sendout! [ 1.108302] twi_start()434 - [i2c0] START can't sendout! [ 1.108567] twi_start()434 - [i2c0] START can't sendout! [ 1.108832] twi_start()434 - [i2c0] START can't sendout! [ 1.109099] twi_start()434 - [i2c0] START can't sendout! [ 1.109365] twi_start()434 - [i2c0] START can't sendout! [ 1.109630] twi_start()434 - [i2c0] START can't sendout! [ 1.109897] twi_start()434 - [i2c0] START can't sendout! [ 1.110069] [VFE_ERR]Error registering v4l2 subdevice No such device! [ 1.110266] twi_start()434 - [i2c0] START can't sendout! [ 1.110532] twi_start()434 - [i2c0] START can't sendout! [ 1.110806] twi_start()434 - [i2c1] START can't sendout! [ 1.111071] twi_start()434 - [i2c1] START can't sendout! [ 1.111336] twi_start()434 - [i2c1] START can't sendout! [ 1.111603] twi_start()434 - [i2c1] START can't sendout! [ 1.111869] twi_start()434 - [i2c1] START can't sendout! [ 1.112134] twi_start()434 - [i2c1] START can't sendout! [ 1.112401] twi_start()434 - [i2c1] START can't sendout! [ 1.112666] twi_start()434 - [i2c1] START can't sendout! [ 1.112931] twi_start()434 - [i2c1] START can't sendout! [ 1.113198] twi_start()434 - [i2c1] START can't sendout! [ 1.113463] twi_start()434 - [i2c1] START can't sendout! [ 1.113728] twi_start()434 - [i2c1] START can't sendout! [ 1.113996] twi_start()434 - [i2c1] START can't sendout! [ 1.114261] twi_start()434 - [i2c1] START can't sendout! [ 1.114526] twi_start()434 - [i2c1] START can't sendout! [ 1.114793] twi_start()434 - [i2c1] START can't sendout! [ 1.115058] twi_start()434 - [i2c1] START can't sendout! [ 1.115323] twi_start()434 - [i2c1] START can't sendout! [ 1.115590] twi_start()434 - [i2c1] START can't sendout! [ 1.115855] twi_start()434 - [i2c1] START can't sendout! [ 1.116120] twi_start()434 - [i2c1] START can't sendout! [ 1.116387] twi_start()434 - [i2c1] START can't sendout! [ 1.116653] twi_start()434 - [i2c1] START can't sendout! [ 1.116918] twi_start()434 - [i2c1] START can't sendout! [ 1.117185] twi_start()434 - [i2c1] START can't sendout! [ 1.117450] twi_start()434 - [i2c1] START can't sendout! [ 1.117715] twi_start()434 - [i2c1] START can't sendout! [ 1.117827] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 [ 1.118011] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf [ 1.118177] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) [ 1.118191] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 [ 1.118203] timeout_to_interv, line 167 [ 1.118211] interv_to_timeout, line 189 [ 1.118221] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec [ 1.118666] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.118937] calibrat: max_cpufreq 1200Mhz Type 0! [ 1.118952] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq [ 1.119381] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.111 2015-4-13 15:24) Compiled in Jul 20 2017 at 11:28:23 [ 1.119420] [mmc]: get mmc0's sdc_power is null! [ 1.119450] [mmc]: get mmc1's sdc_power is null! [ 1.119460] [mmc]: get mmc1's 2xmode ok, val = 1 [ 1.119469] [mmc]: get mmc1's ddrmode ok, val = 1 [ 1.119498] [mmc]: get mmc2's sdc_power is null! [ 1.119507] [mmc]: get mmc2's 2xmode ok, val = 1 [ 1.119517] [mmc]: get mmc2's ddrmode ok, val = 1 [ 1.119530] [mmc]: MMC host used card: 0x7, boot card: 0x0, io_card 2 [ 1.123291] [mmc]: sdc0 power_supply is null [ 1.126877] no red_led, ignore it! [ 1.127142] Registered led device: green_led [ 1.127248] Registered led device: blue_led [ 1.127265] no led_0, ignore it! [ 1.127273] no led_1, ignore it! [ 1.127280] no led_2, ignore it! [ 1.127287] no led_3, ignore it! [ 1.127294] no led_4, ignore it! [ 1.127301] no led_5, ignore it! [ 1.127308] no led_6, ignore it! [ 1.127316] no led_7, ignore it! [ 1.128181] usbcore: registered new interface driver usbhid [ 1.128193] usbhid: USB HID core driver [ 1.129629] script_get_item audio_pa_ctrl not found [ 1.134087] asoc: sndcodec <-> sunxi-codec mapping ok [ 1.135387] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! [ 1.135623] [I2S]snddaudio cannot find any using configuration for controllers, return directly! [ 1.135637] [DAUDIO0] driver not init,just return. [ 1.139573] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok [ 1.141037] oprofile: using arm/armv7-ca7 [ 1.141290] u32 classifier [ 1.141299] Performance counters on [ 1.141307] input device check on [ 1.141315] Actions configured [ 1.141654] TCP: bic registered [ 1.141665] TCP: cubic registered [ 1.141673] TCP: westwood registered [ 1.141681] TCP: highspeed registered [ 1.141689] TCP: hybla registered [ 1.141696] TCP: htcp registered [ 1.141704] TCP: vegas registered [ 1.141712] TCP: veno registered [ 1.141719] TCP: scalable registered [ 1.141727] TCP: lp registered [ 1.141735] TCP: yeah registered [ 1.141743] TCP: illinois registered [ 1.141750] Initializing XFRM netlink socket [ 1.141980] NET: Registered protocol family 10 [ 1.143017] NET: Registered protocol family 17 [ 1.143054] NET: Registered protocol family 15 [ 1.143107] Registering the dns_resolver key type [ 1.143708] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 1.143731] ThumbEE CPU extension supported. [ 1.143758] Registering SWP/SWPB emulation handler [ 1.144392] registered taskstats version 1 [ 1.145459] ths_fetch_sysconfig_para: type err device_used = 1. [ 1.146827] CPU Budget:corekeeper enabled [ 1.147078] CPU Budget:Register notifier [ 1.147092] CPU Budget:register Success [ 1.147106] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 [ 1.150840] [rf_pm]: Did not config module_power0 in sys_config [ 1.150861] [rf_pm]: Did not config module_power1 in sys_config [ 1.150871] [rf_pm]: Did not config module_power2 in sys_config [ 1.150882] [rf_pm]: Did not config module_power3 in sys_config [ 1.150892] [rf_pm]: mod has no chip_en gpio [ 1.150901] [rf_pm]: regulator on. [ 1.150919] [rf_pm]: set losc_out 32k out[wifi_pm]: set wl_reg_on 1 ! [ 1.237511] mmc0: new high speed SDHC card at address aaaa [ 1.238117] mmcblk0: mmc0:aaaa SS16G 14.8 GiB [ 1.239636] mmcblk0: p1 [ 1.240478] mmcblk mmc0:aaaa: Card claimed for testing. [ 1.240494] mmc0:aaaa: SS16G 14.8 GiB [ 1.242081] [mmc]: sdc2 power_supply is null [ 1.251333] WRN:L148(drivers/usb/sunxi_usb/manager/usb_hcd_servers.c):ERR: unkown usbc_no(5) [ 1.351354] [wifi_pm]: wifi gpio init is OK !! [ 1.351798] [rfkill]: rfkill set power 1 [ 1.364599] mmc2: new high speed DDR MMC card at address 0001 [ 1.365133] mmcblk1: mmc2:0001 8WPD3R 7.28 GiB [ 1.365372] mmcblk1boot0: mmc2:0001 8WPD3R partition 1 4.00 MiB [ 1.365616] mmcblk1boot1: mmc2:0001 8WPD3R partition 2 4.00 MiB [ 1.366984] mmcblk1: p1 p2 [ 1.370196] ALSA device list: [ 1.370208] #0: audiocodec [ 1.370216] #1: sndhdmi [ 1.370414] mmcblk1boot1: unknown partition table [ 1.371271] Freeing init memory: 344K [ 1.372217] mmcblk1boot0: unknown partition table [ 1.372547] mmcblk mmc2:0001: Card claimed for testing. [ 1.372569] mmc2:0001: 8WPD3R 7.28 GiB [ 1.374213] [mmc]: sdc1 power_supply is null [ 1.428027] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.429672] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.431382] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.434324] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.526532] mmc1: new high speed SDIO card at address 0001 [ 1.750232] vmouse_input_dev_open [ 1.830179] vmouse_input_dev_close [ 2.095884] Btrfs loaded [ 2.510249] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 2.996705] systemd[1]: System time before build time, advancing clock. [ 3.460313] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 3.460692] systemd[1]: Detected architecture arm. [ 3.491017] systemd[1]: Set hostname to <nanopiair>. [ 3.938274] systemd[1]: Created slice User and Session Slice. [ 3.961064] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.980509] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.010367] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.030453] systemd[1]: Listening on Journal Socket. [ 4.050352] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.070177] systemd[1]: Reached target Encrypted Volumes. [ 4.090282] systemd[1]: Listening on udev Kernel Socket. [ 4.110404] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.130369] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.150568] systemd[1]: Listening on Journal Audit Socket. [ 4.170419] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 4.190289] systemd[1]: Listening on Syslog Socket. [ 4.210165] systemd[1]: Reached target Remote File Systems (Pre). [ 4.230164] systemd[1]: Reached target Remote File Systems. [ 4.250572] systemd[1]: Created slice System Slice. [ 4.350784] systemd[1]: Starting Load Kernel Modules... [ 4.450553] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.470396] systemd[1]: Reached target Slices. [ 4.479696] Registered IR keymap rc-empty [ 4.480328] rc0: sunxi-ir as /devices/virtual/rc/rc0 [ 4.502857] IR RC5(x) protocol handler initialized [ 4.506905] Bluetooth: Core ver 2.16 [ 4.507011] NET: Registered protocol family 31 [ 4.507024] Bluetooth: HCI device and connection manager initialized [ 4.507041] Bluetooth: HCI socket layer initialized [ 4.507054] Bluetooth: L2CAP socket layer initialized [ 4.507082] Bluetooth: SCO socket layer initialized [ 4.512356] Bluetooth: HCI UART driver ver 2.2 [ 4.512375] Bluetooth: HCI H4 protocol initialized [ 4.512384] Bluetooth: HCI BCSP protocol initialized [ 4.512392] Bluetooth: HCILL protocol initialized [ 4.512400] Bluetooth: HCIATH3K protocol initialized [ 4.521423] Bluetooth: RFCOMM TTY layer initialized [ 4.521457] Bluetooth: RFCOMM socket layer initialized [ 4.521467] Bluetooth: RFCOMM ver 1.11 [ 4.526574] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.560937] systemd[1]: Starting Restore / save the current clock... [ 4.577186] rc s_cir0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0 [ 4.582636] dhd_module_init: in [ 4.582655] ======== bcm_wlan_set_plat_data ======== [ 4.582673] bcm_wlan_get_oob_irq enter. [ 4.582774] gpio [202] map to virq [10] ok [ 4.582782] host_oob_irq: 10 [ 4.582789] host_oob_irq_flags=0x414 [ 4.582797] dhd_wifi_platform_load: Enter [ 4.582838] Power-up adapter 'DHD generic adapter' [ 4.582849] wifi_platform_set_power = 1 [ 4.582857] ======== PULL WL_REG_ON HIGH! ======== [ 4.582867] [wifi_pm]: set wl_reg_on 0 ! [ 4.690479] systemd[1]: Mounting POSIX Message Queue File System... [ 4.782913] [wifi_pm]: set wl_reg_on 1 ! [ 4.890945] systemd[1]: Starting Set console keymap... [ 5.020477] systemd[1]: Mounting Debug File System... [ 5.160861] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.290077] wifi_platform_bus_enumerate device present 1 [ 5.290094] ======== Card detection to detect SDIO card! ======== [ 5.290295] dummy_sdmmc: probe of mmc1:0001:1 failed with error -123 [ 5.290335] dummy_sdmmc: probe of mmc1:0001:2 failed with error -123 [ 5.290536] mmc1: card 0001 removed [ 5.290782] [mmc]: sdc1 power_supply is null [ 5.294915] [mmc]: sdc1 power_supply is null [ 5.310527] systemd[1]: Starting Nameserver information manager... [ 5.347264] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 5.348812] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.350365] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.353129] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 5.442898] mmc1: new high speed SDIO card at address 0001 [ 5.450801] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.459670] bcmsdh_register: register client driver [ 5.459815] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 5.459920] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 5.459931] bus num (host idx)=1, slot num (rca)=1 [ 5.459942] found adapter info 'DHD generic adapter' [ 5.460052] sdioh_attach: set sd_f2_blocksize 128 [ 5.460567] F1 signature read @0x18000000=0x1530a9a6 [ 5.463506] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x3 [ 5.464556] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 5.464737] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0 [ 5.464813] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt [ 5.467025] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt [ 5.467831] wl_create_event_handler(): thread:wl_event_handler:c8 started [ 5.467844] tsk Enter, tsk = 0xd51e1430 [ 5.468124] dhd_attach(): thread:dhd_watchdog_thread:c9 started [ 5.468204] dhd_attach(): thread:dhd_dpc:ca started [ 5.468223] dhd_dpc_thread: set dpc_cpucore 0 from config.txt [ 5.468292] dhd_attach(): thread:dhd_rxf:cb started [ 5.468315] dhd_deferred_work_init: work queue initialized [ 5.468750] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt [ 5.468772] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm43438a0.bin [ 5.468787] dhdsdio_download_firmware: set use_rxchain 0 [ 5.468796] dhdsdio_download_firmware: set txglomsize 40 [ 5.468807] sdioh_set_mode: set txglom_mode to multi-desc [ 5.468815] Final fw_path=/lib/firmware/ap6212/fw_bcm43438a0.bin [ 5.468824] Final nv_path=/lib/firmware/ap6212/nvram.txt [ 5.468832] Final conf_path=/lib/firmware/ap6212/config.txt [ 5.470393] systemd[1]: Reached target Paths. [ 5.490703] systemd[1]: Listening on udev Control Socket. [ 5.518735] NVRAM version: AP6212_NVRAM_V1.0_20140603 [ 5.519412] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 5.541081] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 5.573753] systemd[1]: Mounted POSIX Message Queue File System. [ 5.577176] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 5.577300] bcmsdh_oob_intr_register: Enter [ 5.577309] bcmsdh_oob_intr_register: HW_OOB enabled [ 5.577320] bcmsdh_oob_intr_register OOB irq=10 flags=414 [ 5.577460] bcmsdh_oob_intr_register: disable_irq_wake [ 5.578303] dhd_conf_set_fw_int_cmd: set WLC_SET_BAND 142 0 [ 5.578944] dhd_preinit_ioctls: Set tcpack_sup_mode 0 [ 5.580336] Firmware up: op_mode=0x0001, MAC=94:a1:a2:94:9c:5e [ 5.580350] dhd_conf_set_country: set country CN, revision 0 [ 5.580361] dhd_conf_set_fw_string_struct_cmd: set country [ 5.590380] systemd[1]: Mounted Debug File System. [ 5.644555] Country code: CN (CN/0) [ 5.645252] dhd_conf_set_fw_string_cmd: set roam_off 1 [ 5.659262] Firmware version = wl0: Jun 6 2014 14:50:39 version 7.10.226.49 (r) FWID 01-8962686a [ 5.659280] Driver: 1.201.59.6 (r506368) [ 5.659285] Firmware: wl0: Jun 6 2014 14:50:39 version 7.10.226.49 (r) FWID 01-8962686a [ 5.659302] dhd_txglom_enable: enable 0 [ 5.659312] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0 [ 5.659321] dhd_conf_set_txglom_params: txglom_bucket_size=0 [ 5.659331] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=0 [ 5.659342] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0 [ 5.659353] dhd_conf_set_disable_proptx: set disable_proptx 0 [ 5.661771] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 [ 5.673190] Dongle Host Driver, version 1.201.59.6 (r506368) [ 5.673198] Compiled in drivers/net/wireless/bcmdhd [ 5.674130] Register interface [wlan0] MAC: 94:a1:a2:94:9c:5e [ 5.674240] dhd_module_init: Exit err=0 [ 5.682206] ep_matches, wrn: endpoint already claimed, ep(0xc0a2f1ac, 0xd466ddc0, ep1in-bulk) [ 5.682229] ep_matches, wrn: endpoint already claimed, ep(0xc0a2f1ac, 0xd466ddc0, ep1in-bulk) [ 5.682242] ep_matches, wrn: endpoint already claimed, ep(0xc0a2f1f8, 0xd466ddc0, ep1out-bulk) [ 5.682252] gadget_is_softwinner_otg is not -int [ 5.682260] gadget_is_softwinner_otg is not -int [ 5.682279] g_serial gadget: Gadget Serial v2.4 [ 5.682295] g_serial gadget: g_serial ready [ 5.689672] [OV5640@lex]init_sensor - frame_rate: 0, max_win_size: 11 [ 5.760222] systemd[1]: Started Restore / save the current clock. [ 5.920147] systemd[1]: Started Load Kernel Modules. [ 6.090167] systemd[1]: Started Set console keymap. [ 6.230137] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 6.700215] systemd[1]: Started Remount Root and Kernel File Systems. [ 6.920738] systemd[1]: Started Nameserver information manager. [ 7.015234] systemd[1]: Time has been changed [ 7.043839] systemd[1]: Reached target Network (Pre). [ 7.120495] systemd[1]: Activating swap /var/swap... [ 7.226696] Adding 131068k swap on /var/swap. Priority:-1 extents:2 across:139260k SS [ 7.261001] systemd[1]: Starting udev Coldplug all Devices... [ 7.350954] systemd[1]: Starting Load/Save Random Seed... [ 7.500827] systemd[1]: Starting Create Static Device Nodes in /dev... [ 7.660441] systemd[1]: Mounting FUSE Control File System... [ 7.790732] systemd[1]: Starting Apply Kernel Variables... [ 7.817888] systemd[1]: Activated swap /var/swap. [ 7.834219] systemd[1]: Mounted FUSE Control File System. [ 8.360285] systemd[1]: Started Load/Save Random Seed. [ 8.480149] systemd[1]: Started Create Static Device Nodes in /dev. [ 8.620144] systemd[1]: Started Apply Kernel Variables. [ 8.760131] systemd[1]: Started udev Coldplug all Devices. [ 8.900888] systemd[1]: Starting udev Kernel Device Manager... [ 8.920282] systemd[1]: Reached target Local File Systems (Pre). [ 9.090470] systemd[1]: Mounting /tmp... [ 9.110437] systemd[1]: Reached target Swap. [ 9.165925] systemd[1]: Started udev Kernel Device Manager. [ 9.194922] systemd[1]: Mounted /tmp. [ 9.214178] systemd[1]: Found device /dev/ttyGS0. [ 9.230657] systemd[1]: Reached target Local File Systems. [ 9.311134] systemd[1]: Starting Armbian enhanced Log2Ram... [ 9.440825] systemd[1]: Starting Raise network interfaces... [ 9.496850] twi_start()434 - [i2c0] START can't sendout! [ 9.497129] twi_start()434 - [i2c0] START can't sendout! [ 9.497395] twi_start()434 - [i2c0] START can't sendout! [ 9.497537] bmp085: probe of 0-0077 failed with error -121 [ 9.497759] twi_start()434 - [i2c0] START can't sendout! [ 9.498030] twi_start()434 - [i2c0] START can't sendout! [ 9.498309] twi_start()434 - [i2c0] START can't sendout! [ 9.498589] twi_start()434 - [i2c0] START can't sendout! [ 9.498858] twi_start()434 - [i2c0] START can't sendout! [ 9.499127] twi_start()434 - [i2c0] START can't sendout! [ 9.591071] systemd[1]: Starting Set console font and keymap... [ 9.623504] vmouse_input_dev_open [ 9.681517] vmouse_input_dev_close [ 9.711136] systemd[1]: Started Entropy daemon using the HAVEGE algorithm. [ 10.025065] systemd[1]: Started Armbian enhanced Log2Ram. [ 10.133428] systemd[1]: Found device /dev/ttyS0. [ 10.360320] systemd[1]: Started Set console font and keymap. [ 10.478733] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 10.500793] systemd[1]: Stopped LSB: Starts LIRC daemon.. [ 10.640887] systemd[1]: Starting LSB: Starts LIRC daemon.... [ 10.720865] systemd[1]: Created slice system-getty.slice. [ 10.740861] systemd[1]: Reached target Sound Card. [ 10.821132] systemd[1]: Starting Journal Service... [ 10.905022] systemd[1]: Started Journal Service. [ 11.173839] [rfkill]: rfkill set power 0 [ 11.514715] systemd-journald[493]: Received request to flush runtime journal from PID 1 [ 16.010578] [rfkill]: rfkill set power 0 [ 16.031254] [rfkill]: rfkill set power 1 [ 16.050690] [rfkill]: rfkill set power 0 [ 17.986559] dhd_open: Enter d51a8000 [ 18.069676] dhd_open: Exit ret=0 [ 20.538215] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.538237] Bluetooth: BNEP filters: protocol multicast [ 20.995351] Connectting with 8a:15:04:81:2f:20 channel (1) ssid "Masabi-2.4", len (10) [ 21.004944] wl_iw_event: Link UP with BSSID=8A:15:00:00:2F:20 [ 21.005009] wl_bss_connect_done succeeded with 8a:15:04:81:2f:20 One of the odd things about this logging that I note compared to others is that there is not much comign out of VFE. Have i forgot to include somethign when compiling the kernel? The aim of all of this is to get a build where I can control the focus of the camera. Teh standard build offered my friendlyarm will run the camera, but I can't control the focus with those builds.

Banana Pi Pro: Wifi Kernel Module ap6211 crashes

Chrissie Brown replied to Chrissie Brown's topic in Allwinner sunxi

Ok, finally i managed to resolve all issues and got USB Wifi and onboard Wifi working. At first, there is an issue about loading Firmware to USB Devices. This matters all devices, i testet two. To see this / fix this, do the following: Get a well-known Device like RT2800 compatible. Plug it in. You will see in dmesg: [...] [ 944.529335] usbcore: registered new interface driver rt2800usb [ 1005.163497] phy3 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [...] You can start # udevadm monitor --property and watch the events. No Firmware gets loaded. To fix this, i did: * clone firmware, maybe not neccesary / you can get firmware somewhere else git clone https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git cp rt2870.bin /lib/firmware/ * install the missing Firmware loading script and install. Get it for example from: wget https://raw.githubusercontent.com/msekletar/udev/master/extras/firmware/firmware.sh cp firmware.sh /lib/udev chmod 755 /lib/udev/firmware.sh * change loading udev rule, edit file: /lib/udev/rules.d/50-firmwarerule # stub for immediately telling the kernel that userspace firmware loading # failed; necessary to avoid long timeouts with CONFIG_FW_LOADER_USER_HELPER=y #SUBSYSTEM=="firmware", ACTION=="add", ATTR{loading}="-1" SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh --firmware=$env{FIRMWARE} --devpath=$env{DEVPATH}" * now plug in and out the USB Device, firmware gets loaded. See in dmesg. * further working demo / debug with iPhone as an access point, orignal commands # dmesg [ 173.237800] Registered led device: rt2800usb-phy1::radio [ 173.242351] Registered led device: rt2800usb-phy1::assoc [ 173.251511] Registered led device: rt2800usb-phy1::quality [ 212.394061] ADDRCONF(NETDEV_UP): wlx7cdd901d63cb: link is not ready [ 306.550771] wlx7cdd901d63cb: authenticate with 80:2a:a8:d7:d1:fe [ 306.603112] wlx7cdd901d63cb: send auth to 80:2a:a8:d7:d1:fe (try 1/3) [ 306.609799] wlx7cdd901d63cb: authenticated [ 306.647584] wlx7cdd901d63cb: associate with 80:2a:a8:d7:d1:fe (try 1/3) [ 306.667489] wlx7cdd901d63cb: RX AssocResp from 80:2a:a8:d7:d1:fe (capab=0x431 status=0 aid=1) [ 306.716286] ADDRCONF(NETDEV_CHANGE): wlx7cdd901d63cb: link becomes ready [ 306.719199] wlx7cdd901d63cb: associated [ 317.426175] wlx7cdd901d63cb: no IPv6 routers presen # cat /etc/wpa_supplicant/wpa_supplicant.conf network={ ssid="Chrissie's iPhone" psk="asdf1234" } # wpa_supplicant -i wlx7cdd901d63cb -D wext -c /etc/wpa_supplicant/wpa_supplicant.conf -B # dhclient wlx7cdd901d63cb # ifconfig wlx7cdd901d63cb Link encap:Ethernet HWaddr 7c:dd:90:1d:63:cb inet addr:172.20.10.4 Bcast:172.20.10.15 Mask:255.255.255.240 root@bananapipro:/home/chrissie# ping 172.20.10.1 PING 172.20.10.1 (172.20.10.1) 56(84) bytes of data. 64 bytes from 172.20.10.1: icmp_seq=1 ttl=64 time=35.9 ms 64 bytes from 172.20.10.1: icmp_seq=2 ttl=64 time=30.4 ms The second issue is about the onboard wifi driver. If i blacklist the module, and modprobe it when the system has fully booted, it works. you can even automate this with rc.local See: resolve: blacklist module, load when system is fully booted via modprobe, race condition? # vi /etc/modprobe.d/blacklist.conf [...] blacklist ap6211 [...] # reboot # modprobe ap6211 # dmesg [...] [ 135.443706] [ap6211] Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=98:3b:16:e9:6c:36 [ 135.461025] [ap6211] Firmware version = wl0: Mar 10 2014 14:59:50 version 5.90.195.89.18 FWID 01-b13c09c7 [ 135.464100] [ap6211] Chip: a962 Rev 1 Pkg 9 # ifconfig [...] wlan0 Link encap:Ethernet HWaddr 00:90:4c:11:22:33 [...] * to make this permanent, insert the following to the end /etc/rc.local: # By default this script does nothing. sleep 5; modprobe ap6211 exit 0 Well Igor you said, this had worked somewhere in the past, and there havent been changed anything - this ist hard for me to believe. At least i worked it out - maybe this helps some other people :) Chris.

WiFi AP on BPiM2+

Dmitriy Zhuk replied to Dmitriy Zhuk's topic in Allwinner sunxi

I have resolved this problem due to this forum: https://www.raspberrypi.org/forums/viewtopic.php?t=17702 But I have the question. This method works: rmmod dhd modprobe dhd op_mode=2 But this method does't work: echo 2 > /sys/module/dhd/parameters/op_mode Why? How can I to change some script in sources in order to this module insert with op_mode=2 by default?

WiFi AP on BPiM2+

Dmitriy Zhuk replied to Dmitriy Zhuk's topic in Allwinner sunxi

Igor, thank you for this hint. I have the small success. I have done rmmod dhd modprobe dhd op_mode=2 After it, I can scan and see my SSID via mobile phone. But, when I trying to connect to it, my phone can't obtain IP address. Do I have error on my hostapd.conf? Or do I need other actions for successful connecting?

WiFi AP on BPiM2+

Igor replied to Dmitriy Zhuk's topic in Allwinner sunxi

I almost forgot this. With legacy kernel you need to load module (dhd, ap6211 or ap6212) with op_mode=2 while on mainline kernel this is not needed.

Orange Pi Zero Plus 2 & Nano Pi Neo Air: AP6212A Wifi+BT

renard replied to rlsten's topic in Allwinner sunxi

Are you 100% sure that OPiPrime has AP6212(A)? In my case I believe it has Realtek 8723 ``` $ lsmod | grep 80211 cfg80211 294912 1 r8723bs rfkill 28672 3 cfg80211 ``` As for OPiWin, my has AP6212A - maybe my experience might be useful to someone here. Mainline. Could not make it work with mainline 5.32 and upgraded 5.41 (both same kernel 4.11.8) It is using brcmfmac module, that I tried with various firmware (/lib/firmware/brcm/brcmfmac43430-sdio.bin and -=-.txt files). All have the same result - system reboot after first wifi frames go - e.g. client get's dhcp address and the system reboots. The only thing in dmesg: ``` [ 9.458442] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 8 2016 15:31:47 version 7.46.57.4.ap.r4 (A1 Station/P2P) FWID 01-3621395e es6.c5.n4.a3 [ 9.741314] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) [ 9.924496] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) ``` Tracking similar (freez instead of reboot) issue: https://github.com/raspberrypi/linux/issues/1342 Strange, but have the feeling that it did work with mainline before on 5.32 (card was corrupted and had no backup) but might confuse with prime. Legacy. Could make it work in legacy kernel. First the hostapd was starting fine, but was no ESSID in iwconfig and got some error in dmesg ``` CFG80211-ERROR) check_dev_role_integrity : device role select failed ``` Fixed it with module parameter. (by Igor advice from here http://forum.banana-pi.org/t/how-to-setup-a-wifi-ap/2437) # echo 'options bcmdhd op_mode=2' > /etc/modprobe.d/bcmdhd.conf Iwconfig should show the ESSID name. ``` # iwconfig ... wlan0 IEEE 802.11 ESSID:"ARMBIAN" Mode:Master Frequency:2.432 GHz Access Point: 02:1A:11:F8:B9:12 Bit Rate=96 Mb/s Tx-Power:32 dBm Retry min limit:10 RTS thr:off Fragment thr:off Encryption key:off Power Managementmode:All packets received ... ``` Works fine despite some errors in dmesg ``` CFG80211-ERROR) __wl_cfg80211_scan : Invalid Scan Command at SoftAP mode CFG80211-ERROR) wl_cfg80211_scan : scan error (-22) ``` Will appreciate any ideas with mainline and will try to provide any logs if required.

Nano Pi Neo Air - Wifi module changed/ moved

Mavvas posted a topic in Allwinner sunxi

In the 3.4 Kernel I could call: rmmod dhd modprobe dhd op_mode=2 To set the wifi module to Access Point mode. But with the latest Kernel 4.14(?) neither of these modules exist. Does anyone know what the equivalent of this code would be for 4.14, or some other way to enable AP mode?

Nano Pi Neo Air - Wifi module changed/ moved

Mavvas replied to Mavvas's topic in Allwinner sunxi

Thanks for the suggestion, I'll look into it in a bit, but I need it to be done through script. Would the following work? rmmod brcmfmac modprobe brcmfmac op_mode=2 Also I'm using the nanopi-neo-air_eflasher_4.14.img if it helps.

Banana-pi m64 and access point

domoticity replied to domoticity's topic in Beginners

Hy, I have found the Solution. Tested with a Banana pi m64 and the m2 Berry ( with AP6212 and driver BCMDHD). First : For HOSTAPD . If you are in Ubuntu, just do a apt-get install hostapd If you are in Debian, use the Second Method of this Link. Then, make the hostapd.conf An Example : interface=uap0 ssid=testPiAP hw_mode=g channel=11 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=badpassword wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP AP MODE : the msot important sudo nano /etc/modprobe.d/bcmdhd.conf. and write options bcmdhd op_mode=2 Reboot the Card. To see if the AP mode is ok : systool -m bcmdhd -v If you haven't the Systool sudo apt-get install sysfsutils And to launch hostapd sudo hostapd /etc/hostapd/hostapd.conf I hope i was understandable with my Bad English

Banana-pi m64 and access point

domoticity replied to domoticity's topic in Beginners

Hy thank you for your Answer. I have do : sudo modprobe bcmdhd op_mode=2 but always same thing : my ap wifi stays no visible.

Banana-pi m64 and access point

Igor replied to domoticity's topic in Beginners

Load wifi module with parameter op_mode=2

Nano Pi Air AP

Guest posted a topic in Allwinner sunxi

Hi All, I try to get a web page accessible from a hotspot with a notification sent to customer when it connects to the AP (using lighttpd, hostapd, dnsmasq, squid and squidguard) I can connect to the AP but I have no response to the ping On the Nano Pi Air in AP mode : iwconfig => wlan0 IEEE 802.11 ESSID:"Armbian" ifconfig => inet addr:192.168.101.1 I must be able to switch between modes with my software so I use scripts : To switch in AP mode => pkill -f 'ifup .*wlan0'; ifdown wlan0 ifdown wlan0 /bin/systemctl stop NetworkManager && /bin/systemctl disable NetworkManager && kill $(cat /var/run/dnsmasq/dnsmasq.pid) && kill $(cat /run/dnsmasq/dnsmasq.pid) rmmod dhd && modprobe dhd op_mode=2 pkill -f 'ifup .*wlan0'; ifdown wlan0 cp /home/user/interfaces_hostapd /etc/network/interfaces ifup wlan0 service dnsmasq restart & service isc-dhcp-server restart & service hostapd restart To switch in Normal mode => pkill -f 'ifup .*wlan0'; ifdown wlan0 /bin/systemctl stop hostapd & kill $(cat /var/run/dnsmasq.pid) rmmod dhd && modprobe dhd cp /home/user/interfaces_default /etc/network/interfaces && service dnsmasq stop & service hostapd stop & service isc-dhcp-server stop /bin/systemctl start networking.service && /bin/systemctl enable NetworkManager && /bin/systemctl start NetworkManager && /usr/bin/nmcli d set wlan0 managed yes When I switch in normal mode, I can ping and access to the webpage. In AP mode I can connect, get an IP, and then I have no response to ping, I don't know why.....

NanoPi Neo Air Access Point

digitalsuper8 replied to senia's topic in Allwinner sunxi

So here's a more detailed explanation for getting the Nanopi Neo Air to act as wifi accesspoint after boot. I used the FergusL scripts for inspiration and for understanding the contents of the various conf files needed. So after disabling hostapd and dnsmasq I wrote the following bash script, in the directory /usr/local/bin/. It's called neoaccesspoint. sudo nano /usr/local/bin/neoaccesspoint #!/bin/bash PATH="$PATH:/usr/bin/" case "$1" in start) # Assumption: NetworkManager systemd service is stopped and disabled # Assumption: dnsmasq is disabled from startup # Assumption: hostapd is disabled from startup # We first have to bring wlan0 down echo "Bringing wlan0 down" ifdown wlan0 # Then remove the dhd module and load it again in operating mode 2 echo "removing module dhd and doing modprobe dhd op_mode2" rmmod dhd modprobe dhd op_mode=2 # we then have to bring wlan0 up again for it to get an IP address echo "bringing wlan0 up again" ifup wlan0 # We then bring up hostapd echo "starting hostapd" /bin/systemctl start hostapd # And we start dnsmasq echo "starting dnsmasq" #/usr/sbin/dnsmasq /bin/systemctl start dnsmasq ;; stop) # type any commmand echo "Stopping MyAP_Startup service: stopping dnsmasq and hostapd and bringing down wlan0" /bin/systemctl stop hostapd /bin/systemctl stop dnsmasq ifdown wlan0 ;; restart) $0 stop $0 start ;; esac exit 0 Then I created a service file in /lib/systemd/system/ sudo nano /lib/systemd/system/neoairaccesspoint.service the contents: [Unit] #This file has to be in /etc/systemd/system/ Description=Manage the neoairaccesspoint script # Example After statement, this unit only starts after the speficied units are active #After=syslog.target network.target [Service] #Type=forking Type=oneshot ExecStart=/usr/local/bin/neoairaccesspoint start RemainAfterExit=true ExecStop=/usr/local/bin/neoairaccesspoint stop ExecReload=/usr/local/bin/neoairaccesspoint restart # We probably don't want to specify the user here #User=npi [Install] WantedBy=graphical.target I enabled this service by the following commands: sudo systemctl daemon-reload sudo systemctl enable neoairaccesspoint.service This should do it after reboot: sudo systemctl reboot Hope it works for you. Of course you have to have your conf files correct for: hostapd.conf dnsmasq.conf and /etc/network/interfaces

NanoPi Neo Air Access Point

StuxNet replied to senia's topic in Allwinner sunxi

@digitalsuper8 I'll have to try this out soon. I've abandoned the project for quite awhile now but I always figured it was just missing something simple (like below) related to dnsmasq and not simply a matter of modprobe dhd op_mode=2 which kept coming up again and again /bin/systemctl disable hostapd /bin/systemctl disable dnsmasq Just to be clear you ran FergusL's script, then applied what you mention in your post? or vice-versa? Looking to get a little more detail into the step by step you've taken. Also, what version you running? I just went ahead and plugged in my NPNA and /bin/systemctl disable dnsmasq command errors with Failed to start dnsmasq.service: Unit dnsmasq.service failed to load: No such file or directory. Ima keep hacking away at it, if you have any pointers or step by step directions in the meantime, I'd appreciate it. Prolly just my current setup, since as mentioned the project was abandoned awhile back and I have no recollection of how much/lil I biffed my network settings and configs xD

NanoPi Neo Air Access Point

digitalsuper8 replied to senia's topic in Allwinner sunxi

I have a NanoPi Neo Air now working as wifi accesspoint, showing SSID and allowing me to connect. My first trials with the apmode.sh (thanks FergusL) gave me the same problem that most of you had: There was an SSID being broadcast but I simply couldn't connect. In my case I believe the problem was doing: rmmod dhd modprobe dhd op_mode=2 Because this brought down the wlan0 module and I found out that thereafter the wlan0 doesn't have an IP address anymore. This causes problems for dnsmasq and leads to dnsmasq not issueing ip-addresses to devices that connect to hostapd. So hostapd accepts the password but dnsmasq doesn't provide an IP address so you cannot connect.. So here's what I did: 1. I disabled NetworkManager once (that then makes that permanently disabled at boot up): /bin/systemctl stop NetworkManager /bin/systemctl disable NetworkManager 2. Because Armbian in my case started up hostapd and dnsmasq during boot I disabled those too. /bin/systemctl disable hostapd /bin/systemctl disable dnsmasq 3. I wrote a script that first brings down wlan0 (ifdown wlan0), then runs the ' rmmod dhd' and 'modprobe dhd op_mode=2' commands. After that it brings up wlan0 (ifup wlan0), so that it again gets an IP address (it uses the 'interfaces' file for that). Finally the script starts hostapd and dnsmasq: ifdown wlan0 rmmod dhd modprobe dhd op_mode=2 ifup wlan0 /bin/systemctl start hostapd /bin/systemctl start dnsmasq I created a service based on that script and enabled it with systemctl so that at each boot automatically the nanopi neo air is in wifi accesspoint mode and will broadcast SSID and allows connections. I need to look up the exact script and the service files and will post those. It worked for my set up, hope it helps.

NanoPi Neo Air Access Point

StuxNet replied to senia's topic in Allwinner sunxi

Yup yup. This I know. Wasn't asking for help just trying to help out dude I quoted. I'm very familiar with op_mode=2. It's probably the third time you've told me xD (I understand you're just trying to make the info known) Also, I've tried manually modprobing it, custom configs, armbian-config with no luck. No pressure though. You've got more important things to worry about and I'm well aware armbian-config is in first versions and expect bugs. TL;DR: I gotchu.

Sign In

Search the Community

Search By Tags

Search By Author

Content Type

Forums

Product Groups

Categories

Categories

Calendars

Categories

Categories

Find results in...

Find results that contain...

Date Created

Start

End

Last Updated

Start

End

Filter by number of...

Minimum number of comments

Minimum number of replies

Minimum number of reviews

Minimum number of views

Joined

Start

End

Group

Matrix

Mastodon

IRC

Website URL

XMPP/Jabber

Skype

Github

Discord

Location

Interests

Important Information