Search the Community

It is now possible to start kicking the tires on Vulkan with an open source driver on Arm Mali-G610 and Mali-G310 GPUs. The Panfrost project continues to grow! View the full article

I did this using nmtui. The problem is that when rebooting the kernel cannot manage power to the rtl8821cu. After boot: $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 2: end0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether d6:e3:db:f5:f2:24 brd ff:ff:ff:ff:ff:ff inet 192.168.100.124/24 metric 100 brd 192.168.100.255 scope global dynamic end0 valid_lft 259091sec preferred_lft 259091sec inet6 fe80::d4e3:dbff:fef5:f224/64 scope link valid_lft forever preferred_lft forever 3: wlx60fb005126f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 60:fb:00:51:26:f0 brd ff:ff:ff:ff:ff:ff $ lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 2: Dev 4, If 0, Class=Wireless, Driver=btusb, 480M |__ Port 2: Dev 4, If 1, Class=Wireless, Driver=btusb, 480M |__ Port 2: Dev 4, If 2, Class=Vendor Specific Class, Driver=rtl8821cu, 480M After reboot: $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 2: end0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether d6:e3:db:f5:f2:24 brd ff:ff:ff:ff:ff:ff inet 192.168.100.124/24 metric 100 brd 192.168.100.255 scope global dynamic end0 valid_lft 259185sec preferred_lft 259185sec inet6 fe80::d4e3:dbff:fef5:f224/64 scope link valid_lft forever preferred_lft forever $ lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 2: Dev 4, If 0, Class=Wireless, Driver=btusb, 480M |__ Port 2: Dev 4, If 1, Class=Wireless, Driver=btusb, 480M |__ Port 2: Dev 4, If 2, Class=Vendor Specific Class, Driver=, 480M Part of dmesg output after reboot (details in attachments at first post): [ 10.228925] ------------[ cut here ]------------ [ 10.228944] WARNING: CPU: 2 PID: 954 at drivers/net/wireless/rtl8811cu/hal/rtl8821c/rtl8821c_halinit.c:106 rtl8821c_power_on+0x50/0xa4 [8821cu] [ 10.229080] Modules linked in: lz4hc lz4 zram btusb binfmt_misc btrtl btintel btbcm 8821cu btmtk bluetooth ecdh_generic ecc meson_vdec(C) onboard_usb_hub snd_soc_hdmi_codec panfrost videobuf2_dma_contig v4l2_mem2mem gpu_sched polyval_ce videobuf2_memops videobuf2_v4l2 drm_shmem_ helper meson_gxbb_wdt polyval_generic videodev snd_soc_meson_g12a_tohdmitx snd_soc_meson_axg_tdmout snd_soc_meson_axg_sound_card snd_soc_meson_axg_frddr snd_soc_meson_codec_glue snd_soc_meson_card_utils meson_ir snd_soc_meson_axg_fifo meson_rng snd_soc_meson_axg_tdm_interface snd_s oc_meson_axg_tdm_formatter videobuf2_common dw_hdmi_i2s_audio rc_core snd_soc_core mc snd_compress meson_saradc ac97_bus snd_pcm_dmaengine snd_pcm snd_timer snd nvmem_meson_efuse soundcore cfg80211 rfkill dm_mod efi_pstore ip_tables x_tables autofs4 meson_gxl smsc realtek axg_audio dwmac_generic sclk_div clk_phase reset_meson_audio_arb rtc_meson_vrtc dwmac_meson8b adc_keys [ 10.229231] CPU: 2 PID: 954 Comm: kworker/2:3 Tainted: G C 6.6.47-current-meson64 #3 [ 10.229238] Hardware name: Banana Pi BPI-M2-PRO (DT) [ 10.229245] Workqueue: usb_hub_wq hub_event [ 10.229258] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 10.229265] pc : rtl8821c_power_on+0x50/0xa4 [8821cu] [ 10.229361] lr : rtl8821c_power_on+0x4c/0xa4 [8821cu] [ 10.229453] sp : ffff800084e6b420 [ 10.229457] x29: ffff800084e6b420 x28: 0000000000000002 x27: 00000000ffffffed [ 10.229467] x26: ffff800079fa30c8 x25: ffff000007bbb000 x24: 0000000000000001 [ 10.229475] x23: 0000000000008129 x22: 0000000000000001 x21: ffff80008272d000 [ 10.229484] x20: ffff000003fc8000 x19: ffff8000824d5000 x18: ffff00006f39afec [ 10.229492] x17: 0000000000003ed0 x16: 00000000000d9c00 x15: 0000000000000001 [ 10.229500] x14: ffff00006f378480 x13: 0000000000000002 x12: 0000000000000000 [ 10.229509] x11: 0000000000000001 x10: 0000000000000a80 x9 : ffff800084e6afe0 [ 10.229517] x8 : ffff00006f370680 x7 : 0082008810000008 x6 : ffff00006f3706a8 [ 10.229525] x5 : ffff800079f3c300 x4 : ffff800079f3c300 x3 : ffff80007a03a7d8 [ 10.229533] x2 : 0000000000000001 x1 : 000000000000001e x0 : 00000000ffffffff [ 10.229542] Call trace: [ 10.229546] rtl8821c_power_on+0x50/0xa4 [8821cu] [ 10.229639] rtw_hal_power_on+0x24/0x60 [8821cu] [ 10.229731] hal_read_mac_hidden_rpt+0x154/0x25c [8821cu] [ 10.229823] rtl8821c_read_efuse+0x2d8/0x4d8 [8821cu] ...

I was using xfce4 back then. You don't need wayland for panfrost to work. These days I use ubuntu-desktop (gnome) with wayland and it works just as well. There are issue's with kde desktop and wine not working. Only for ps2 emulation I still use an x11 desktop since it performs a little better.

@NicoD in your video are you using cinnamon desktop? If so does it support wayland because only then panfrost will work

Struggle continues... Because the hdmi is not working (error logs mentioned above) I tried uninstalling armbian kernels & installed official vendor .deb files, These I compiled using OPi official build procedure for OPi 3b v2.1 You can get x3 .debs from .7z archive here https://github.com/defencedog/orangepi3b_v2.1/tree/b0d58e10589c567025774da07ea300e48631740f/Orangepi-3B%20rk3566-5.10.160-panfrost/cross-built then apt list --installed |grep -e ^linux-image -e ^linux-dtb -e ^linux-headers sudo apt purge linux-image-xxx linux-dtb-xxx linux-headers-xxx sudo apt install libssl-dev python-is-python3 sudo dpkg -i linux-dtb-legacy-rockchip-rk356x_1.0.6_arm64.deb linux-headers-legacy-rockchip-rk356x_1.0.6_arm64.deb linux-image-legacy-rockchip-rk356x_1.0.6_arm64.deb sudo sync because of changed dtb & overlays modify /boot/armbianEnv.txt Following x2 lines must be same. This reflect changes in /boot/dtb/rockchip/ & /boot/dtb/rockchip/overlays overlay_prefix=rk356x fdtfile=rockchip/rk3566-orangepi-3b-v2.dtb Save edits & reboot Success HDMI now works. BT doesn't work (no module found). WIFI also works however Broadcom now uses wl driver instead of brcmfmac I installed ubuntu-desktop & the cursor is invisible, however cursor works OK while logged in as X-session of Ubuntu meaning wayland is to blame. If you logged in KODI wayland session cursor works OK?? GDM3 has no cursor as well When I move cursor while in wayland session, these errors keep repeating journalctl -f Aug 26 20:41:02 orangepi3b gnome-shell[2921]: Failed to post KMS update: drmModeAtomicCommit: Invalid argument Aug 26 20:41:02 orangepi3b kernel: [drm:vop2_plane_atomic_check] *ERROR* Unsupported linear format at Cluster0-win0 Aug 26 20:41:02 orangepi3b gnome-shell[2921]: Page flip discarded: drmModeAtomicCommit: Invalid argument Aug 26 20:41:02 orangepi3b gnome-shell[2921]: Failed to post KMS update: drmModeAtomicCommit: Invalid argument Aug 26 20:41:02 orangepi3b kernel: [drm:vop2_plane_atomic_check] *ERROR* Unsupported linear format at Cluster0-win0 Aug 26 20:41:02 orangepi3b gnome-shell[2921]: Page flip discarded: drmModeAtomicCommit: Invalid argument Aug 26 20:41:02 orangepi3b gnome-shell[2921]: Failed to post KMS update: drmModeAtomicCommit: Invalid argument Aug 26 20:41:02 orangepi3b kernel: [drm:vop2_plane_atomic_check] *ERROR* Unsupported linear format at Cluster0-win0 Aug 26 20:41:02 orangepi3b gnome-shell[2921]: Page flip discarded: drmModeAtomicCommit: Invalid argument I strongly believe its some GNOME related error. Internet is full of this bug when people are using eGPUs. If anyone has any idea, please help

I've had an Orange Pi 3 LTS for a couple of months now. I bought it for use as a home theater tv box. I thought I'd use the official orange pi ubuntu release, but it turned out to be really outdated and broken. So I have been trying to get Armbian to work. After a lot of troubleshooting and time spent reading docs and forums, I can't get the thing to play video properly. It plays but is terrible quality and stutters constantly. I've determined that panfrost is working. In orangepi-config, under Hardware, it says the GPU is enabled. But when I run glmark2 I get a score of 100 or less no matter what I do. I've tried old builds of armbian for the pi 3 lts and they either wouldn't boot, don't have working wifi, or have the same video issue. I've tried running the build script myself but it has either failed or not produced a bootable build. I would love to learn more about Armbian and SBCs and actually get this thing to work for video, but it is incredibly overwhelming. Is this even worth my time to try to get working? I keep thinking there's just one setting I need to change, one driver I need to install, or something I'm missing, but I can't find it. Should I just buy a different board? If so, which one in a similar price range would actually do what I'm looking for? Thanks folks.

May I know how do you enable Panrost support Ubuntu 24.04 on Khadas Edge2? By Khadas SDK, I have built image which failed with followings: 1. Enabled Panfrost in defconfig. 2. Add kisak-mesa ppa, apt update and upgrade. 3. Replace mali_csffw.bin by Armbian mali firmware. After these, the gnome-settings shows the GPU is software vendoring. Hope to get your help~ Thanks!

It is the case that I only copy the content of the "rtl_nic" folder from the archive to the folder "/lib/firmware/rtl_nic" to the archive correctly? Unfortunately, that doesn't fix my problem either. I still have the message with the status -2 and the device is no longer available at times. However, I noticed something. I bought a series on AkibapassTV and I put these files on the Helios64. I play this with the VLC player from my PC. If I spoil too quickly, I see in the terminal, where I also let "Ping" run that the answer "Destination Host Unreachable" is output in places, at least until the network adapter has been restarted and it is active again. However, I can no longer find the DMA reports in the list, so it seems to have resolved it. Still, I get something like that: # dmesg | grep r8152 [ 21.167322] usbcore: registered new device driver r8152-cfgselector [ 21.380437] r8152-cfgselector 2-1.4: reset SuperSpeed USB device number 3 using xhci-hcd [ 21.476788] r8152 2-1.4:1.0: load rtl8156a-2 v2 04/27/23 successfully [ 21.531806] r8152 2-1.4:1.0 eth0: v1.12.13 [ 21.532016] usbcore: registered new interface driver r8152 [ 21.605123] r8152 2-1.4:1.0 enx646266d00567: renamed from eth0 [ 25.324976] r8152 2-1.4:1.0 enx646266d00567: Stop submitting intr, status -108 [ 25.751987] r8152-cfgselector 2-1.4: reset SuperSpeed USB device number 3 using xhci-hcd [ 25.837596] r8152 2-1.4:1.0: load rtl8156a-2 v2 04/27/23 successfully [ 25.906230] r8152 2-1.4:1.0 eth0: v1.12.13 [ 26.114614] r8152 2-1.4:1.0 enx646266d00567: renamed from eth0 [ 28.391924] r8152 2-1.4:1.0 enx646266d00567: carrier on [24871.270580] r8152 2-1.4:1.0 enx646266d00567: carrier on [42214.756880] NETDEV WATCHDOG: enx646266d00567 (r8152): transmit queue 0 timed out 7312 ms [42214.756940] Modules linked in: lz4hc lz4 zram binfmt_misc leds_pwm hantro_vpu rockchip_vdec(C) v4l2_vp9 pwm_fan rockchip_rga videobuf2_dma_contig snd_soc_hdmi_codec v4l2_h264 videobuf2_dma_sg v4l2_mem2mem snd_soc_rockchip_i2s videobuf2_memops videobuf2_v4l2 snd_soc_core rk_crypto panfrost snd_compress gpu_sched snd_pcm_dmaengine rng_core drm_shmem_helper snd_pcm snd_timer videodev snd videobuf2_common mc soundcore cpufreq_dt gpio_beeper sg cfg80211 rfkill ledtrig_netdev lm75 dm_mod nfnetlink ip_tables x_tables autofs4 raid10 raid1 raid0 multipath linear cdc_ncm cdc_ether usbnet raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx md_mod r8152 realtek dwmac_rk fusb302 gpio_charger stmmac_platform tcpm typec stmmac pcs_xpcs adc_keys [42214.757477] r8152 2-1.4:1.0 enx646266d00567: Tx timeout [42214.761162] r8152 2-1.4:1.0 enx646266d00567: Tx status -2 [42214.761240] r8152 2-1.4:1.0 enx646266d00567: Tx status -2 [42214.761392] r8152 2-1.4:1.0 enx646266d00567: Tx status -2 [42214.761533] r8152 2-1.4:1.0 enx646266d00567: Tx status -2 [42216.867928] r8152-cfgselector 2-1.4: reset SuperSpeed USB device number 3 using xhci-hcd [75856.736623] r8152 2-1.4:1.0 enx646266d00567: Tx timeout [75856.741073] r8152 2-1.4:1.0 enx646266d00567: Tx status -2 [75856.741130] r8152 2-1.4:1.0 enx646266d00567: Tx status -2 [75856.741241] r8152 2-1.4:1.0 enx646266d00567: Tx status -2 [75856.741387] r8152 2-1.4:1.0 enx646266d00567: Tx status -2 [75858.851803] r8152-cfgselector 2-1.4: reset SuperSpeed USB device number 3 using xhci-hcd Do you have a few more ideas? Or is this 1 folder "rtl_nic" from the archive not enough?

I've now resigned myself to the fact that using Raxda's SBCs requires external adapters, they are not able to provide even a minimal working system, as their latest Debian image demonstrates: https://github.com/radxa-build/rock-3c/releases/tag/b43. So yours don't work either, or am I doing something wrong? ____ _ _____ ____ | _ \ ___ ___| | __ |___ / / ___| | |_) / _ \ / __| |/ / |_ \| | | _ < (_) | (__| < ___) | |___ |_| \_\___/ \___|_|\_\ |____/ \____| Welcome to Armbian_community 24.11.0-trunk.4 Bookworm with Linux 6.6.47-current-rockchip64 No end-user support: untested automated build System load: 21% Up time: 0 min Memory usage: 5% of 1.93G IP: 192.168.1.163 CPU temp: 63°C Usage of /: 6% of 29G uname -a Linux rock2g 6.6.47-current-rockchip64 #1 SMP PREEMPT Mon Aug 19 04:04:32 UTC 2024 aarch64 GNU/Linux sudo dmesg -l 0,1,2,3 [ 11.942338] of_dma_request_slave_channel: dma-names property of node '/serial@fe650000' missing or empty [ 14.090200] Bluetooth: hci0: command 0x0c03 tx timeout [ 14.090306] Bluetooth: hci0: BCM: Reset failed (-110) ip a | grep "inet " inet 127.0.0.1/8 scope host lo inet 192.168.1.163/24 metric 100 brd 192.168.1.255 scope global dynamic enxb88d1254cda3 ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 2: end0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether a6:a2:b0:36:4d:8f brd ff:ff:ff:ff:ff:ff inet6 2a01:e11:1400:5d0:6bf9:d83d:a987:dc3f/64 scope global temporary dynamic valid_lft 86027sec preferred_lft 85098sec inet6 2a01:e11:1400:5d0:a4a2:b0ff:fe36:4d8f/64 scope global dynamic mngtmpaddr noprefixroute valid_lft 86027sec preferred_lft 86027sec inet6 fe80::a4a2:b0ff:fe36:4d8f/64 scope link valid_lft forever preferred_lft forever 3: enxb88d1254cda3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether b8:8d:12:54:cd:a3 brd ff:ff:ff:ff:ff:ff inet 192.168.1.163/24 metric 100 brd 192.168.1.255 scope global dynamic enxb88d1254cda3 valid_lft 41689sec preferred_lft 41689sec inet6 fd8c:df22:1b60:a94b:8d64:46a6:bfb8:62b8/64 scope global temporary deprecated dynamic valid_lft 475sec preferred_lft 0sec inet6 fd8c:df22:1b60:a94b:ba8d:12ff:fe54:cda3/64 scope global deprecated dynamic mngtmpaddr noprefixroute valid_lft 475sec preferred_lft 0sec inet6 2a01:e11:1400:5d0:f759:2829:fa0b:ad4e/64 scope global temporary dynamic valid_lft 86027sec preferred_lft 84745sec inet6 2a01:e11:1400:5d0:ba8d:12ff:fe54:cda3/64 scope global dynamic mngtmpaddr noprefixroute valid_lft 86027sec preferred_lft 86027sec inet6 fe80::ba8d:12ff:fe54:cda3/64 scope link valid_lft forever preferred_lft forever sudo dmesg | grep eth [ 0.000000] psci: probing for conduit method from DT. [ 4.039090] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found [ 4.042387] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input). [ 4.042420] rk_gmac-dwmac fe010000.ethernet: TX delay(0x47). [ 4.042435] rk_gmac-dwmac fe010000.ethernet: RX delay(0x27). [ 4.042461] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no). [ 4.042527] rk_gmac-dwmac fe010000.ethernet: clock input from PHY [ 4.050680] rk_gmac-dwmac fe010000.ethernet: init for RGMII [ 4.055059] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 4.055098] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5 [ 4.055113] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported [ 4.055123] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported [ 4.055133] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported [ 4.055142] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported [ 4.055276] rk_gmac-dwmac fe010000.ethernet: TSO supported [ 4.055291] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 4.055305] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10) [ 4.055319] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled [ 4.055331] rk_gmac-dwmac fe010000.ethernet: Using 32/32 bits DMA host/device width [ 4.302372] rk_gmac-dwmac fe010000.ethernet end0: renamed from eth0 [ 4.656403] asix 6-1:1.0 eth0: register 'asix' at usb-fd880000.usb-1, ASIX AX88772 USB 2.0 Ethernet, b8:8d:12:54:cd:a3 [ 4.664025] asix 6-1:1.0 enxb88d1254cda3: renamed from eth0 [ 11.660738] rk_gmac-dwmac fe010000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 11.758203] rk_gmac-dwmac fe010000.ethernet end0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 11.768291] rk_gmac-dwmac fe010000.ethernet end0: No Safety Features support found [ 11.768322] rk_gmac-dwmac fe010000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported [ 11.768670] rk_gmac-dwmac fe010000.ethernet end0: registered PTP clock [ 11.769109] rk_gmac-dwmac fe010000.ethernet end0: configuring for phy/rgmii link mode [ 673.250279] rk_gmac-dwmac fe010000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx Module Size Used by lz4hc 12288 0 lz4 12288 0 zram 32768 3 binfmt_misc 20480 1 nls_iso8859_1 12288 1 hci_uart 135168 0 hantro_vpu 249856 0 v4l2_vp9 20480 1 hantro_vpu rockchip_rga 20480 0 btqca 20480 1 hci_uart videobuf2_dma_contig 20480 1 hantro_vpu btrtl 28672 1 hci_uart snd_soc_simple_card 20480 0 snd_soc_rk817 40960 1 snd_soc_hdmi_codec 20480 1 v4l2_h264 16384 1 hantro_vpu snd_soc_rockchip_i2s_tdm 20480 4 v4l2_mem2mem 24576 2 hantro_vpu,rockchip_rga videobuf2_dma_sg 16384 1 rockchip_rga btintel 40960 1 hci_uart snd_soc_simple_card_utils 24576 1 snd_soc_simple_card snd_soc_core 208896 5 snd_soc_rockchip_i2s_tdm,snd_soc_hdmi_codec,snd_soc_rk817,snd_soc_simple_card_utils,snd_soc_simple_card videobuf2_memops 16384 2 videobuf2_dma_contig,videobuf2_dma_sg btbcm 20480 1 hci_uart videobuf2_v4l2 20480 3 hantro_vpu,rockchip_rga,v4l2_mem2mem pwm_fan 20480 0 snd_compress 24576 1 snd_soc_core bluetooth 663552 6 btrtl,btqca,btintel,hci_uart,btbcm videodev 229376 4 videobuf2_v4l2,hantro_vpu,rockchip_rga,v4l2_mem2mem panfrost 69632 0 snd_pcm_dmaengine 12288 1 snd_soc_core display_connector 16384 0 rk_crypto2 36864 0 snd_pcm 106496 5 snd_soc_hdmi_codec,snd_compress,snd_soc_simple_card_utils,snd_soc_core,snd_pcm_dmaengine videobuf2_common 49152 7 videobuf2_dma_contig,videobuf2_v4l2,hantro_vpu,rockchip_rga,videobuf2_dma_sg,v4l2_mem2mem,videobuf2_memops gpu_sched 36864 1 panfrost snd_timer 36864 1 snd_pcm dw_hdmi_i2s_audio 12288 0 dw_hdmi_cec 12288 0 mc 53248 5 videodev,videobuf2_v4l2,hantro_vpu,videobuf2_common,v4l2_mem2mem drm_shmem_helper 16384 1 panfrost sm3_generic 12288 1 rk_crypto2 snd 77824 5 snd_soc_hdmi_codec,snd_timer,snd_compress,snd_soc_core,snd_pcm sm3 20480 1 sm3_generic at24 20480 0 rk817_charger 20480 0 soundcore 12288 1 snd apple_mfi_fastcharge 16384 0 cpufreq_dt 16384 0 cfg80211 802816 0 rfkill 24576 3 bluetooth,cfg80211 dm_mod 126976 0 ip_tables 28672 0 x_tables 36864 1 ip_tables autofs4 40960 2 ax88796b 12288 1 realtek 32768 1 spi_rockchip_sfc 16384 0 dwmac_rk 28672 0 stmmac_platform 20480 1 dwmac_rk stmmac 233472 3 stmmac_platform,dwmac_rk pcs_xpcs 20480 1 stmmac asix 49152 0 usbnet 40960 1 asix

Continue .. An other issue With Z1 Tv Box is that i tried to install the image to eMMC via armbian-install. Installation succeeds but after system was not able to boot directly from eMMC. With MiniArch-20240715-6.10.0-board-h313.x96_q_lpddr3-SD-Image.img eMMC boot is without problems. This probably has to do with U-boot because Miniarch uses extlinux to boot in a seperate fat partition .... I will try to manual partition the eMMC to see if this is resolved. At this time The Box Operates with SD card with Armbian_community_24.8.0-trunk.495_Orangepi3_noble_current_6.6.36_gnome_desktop.img with ssh, apache, php, mariadb and firebird3 server installed ALL works OK and stable (and relatively fast) except the HDMI on console, Cpu Temp, and onboard Ethernet. the Ethernet issue also exist in miniarch but with miniarch i had no HDMI issue. I suspect the panfrost driver in combination with the box DTB (sun50i-h313-x96-q-lpddr3.dtb) .. I will investigate it further. This my progress for now.

I am learning kernel dtb stuff & I have made a custom image which performs good as far as NPU VPU are concerned. However, I am missing something because WIFI is not detected. Following are some required outputs. My Pi is v2.1 & its WIFI/BT is broadcom chipset Additionally, i tried install armbian-full-firmware as well OS: Armbian (24.8.0-trunk) aarch64 Host: Rockchip RK3566 OPi 3B Kernel: 5.10.160-rockchip-rk356x Uptime: 13 mins Packages: 1327 (dpkg) Shell: bash 5.1.16 Terminal: /dev/pts/0 CPU: (4) @ 1.800GHz Memory: 493MiB / 3922MiB $ sudo lshw -C network *-network description: Ethernet interface physical id: f logical name: eth0 serial: 00:00:a4:82:ff:d7 size: 100Mbit/s capacity: 1Gbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=st_gmac driverversion=Jan_2016 duplex=full ip=192.168.1.8 link=yes multicast=yes port=twisted pair speed=100Mbit/s $ sudo lsmod Module Size Used by sch_fq_codel 20480 2 zstd 16384 4 binfmt_misc 20480 1 sprdwl_ng 311296 0 sprdbt_tty 28672 0 fuse 110592 1 ip_tables 28672 0 ipv6 434176 44 panfrost 57344 5 gpu_sched 28672 1 panfrost rtc_rk808 16384 1 $ dmesg | grep -i wifi [ 16.715482] WCN: start_marlin [MARLIN_WIFI] [ 16.715496] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 [ 25.750599] sprdwl:[WIFI_CMD_SYNC_VERSION]timeout [ 25.750634] sprdwl:ctx_id:0 cmd: WIFI_CMD_SYNC_VERSION[9] rsp timeout (mstime = 15648), num=1 [ 38.650942] unisoc_wifi: probe of unisoc_wifi failed with error -1 armbianmonitor -u https://paste.armbian.com/owokujocuj

@SteeMan thanks @Giordano Sologuren thanks for instructing this chemical engineer. I tested the image & yes it works. Panfrost is there by default. However, Bluetooth doesn't work (which is a primary requirement). As an enginner I have to connect & manipulate multiple field instruments that is why BT is necessary I am happy though 3.5mm audio out works (HDMI audio out doesn't but its not my focus) After apt update / upgrade / reboot I am attaching mu UART serial log in hopes someone can provide feedback on the BT issue. I am ready to do debugging from my side. Errors at the end pop up when I am trying to enable BT via radio button of gnome interface orangepi3b login: [ 342.243982] sdiohal err:wait scan card time out [ 345.319840] WCN_ERR: wait SDIO rescan card time out [ 345.320320] WCN_ERR: chip power on fail [ 345.320686] sdiohal err:sdiohal_runtime_put line 1756 not have card Armbian_community_24.8.0-trunk.495_Orangepi3b_noble_edge_6.10.2_gnome_putty.log

Hi @gop3k I've been having the same issues on the Orange Pi 3 LTS. Video is really choppy and unwatchable, and I can't figure out why. I know it's possible to play video smoothly on this board because I can do so with the Android OS that came on the device. I actually reinstalled Android on an sd card (you have to use Allwinner's proprietary sd flashing tool) so I could actually use it for Kodi in the short term. But ideally I'd like to get Armbian working. I'm using a recent Armbian build for the Orange Pi 3 LTS: Armbian_community_24.8.0-trunk.495_Orangepi3-lts_noble_current_6.6.36_gnome_desktop I have done some research, which I'll outline below. I'm certain some of my understanding must be wrong, so take that for what it's worth. If someone is willing to correct me I'm happy to be corrected. I think that the gpu is not working properly in the most recent builds. I found that in older builds using Allwinner H6 chips that some people had to manually enable the GPU, but it looks like it is enabled but not working properly. The Allwinner H6 has a Mali-T720 MP2 GPU and Panfrost is the open source driver for it. I used the commands from here to make sure Panfrost is installed, enabled, and working. Which all seemed to be true in this build. But when I run glmark2 I get a score of around 85-100. Based on research this seems to be half of what the Allwinner H6 is capable of. Running armbian-config I see the option to enable hardware features, and as far as I know, this shows the different overlays you can enable in the device tree to tell the kernel about your hardware. These overlays are located in /boot/dts/allwinner/overlay/. A problem with the overlays is that many of them seem to be for the Allwinner H616 cpu. Which I know is just an updated version of the H6, but I'm wondering if that's causing problems. There is an option to enable the H616 gpu, which I turned on, then restarted. I still got the same 85-100 range of scores in glmark2. Could it be that Armbian is trying to use settings for the H616 instead of the H6 and that could be causing problems? I tried doing a custom build myself, which failed so I'll need to look into that if I want to try it again. But for now I'm going to try using an older automated build to see if that makes any difference. I'll respond again if I have anything to report.

### lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M ### Group membership of *REDACTED* : *REDACTED* tty disk dialout sudo audio video plugdev games users systemd-journal input netdev ssh docker ### Userland: PRETTY_NAME="Armbian 23.8.1 bullseye" ARMBIAN_PRETTY_NAME="Armbian 23.8.1 bullseye" ### Installed packages: rc armbian-bsp-cli-rockpi-4c 23.8.1 arm64 Armbian CLI BSP for board 'rockpi-4c' - transitional package ii armbian-bsp-cli-rockpi-4c-current 23.8.1 arm64 Armbian CLI BSP for board 'rockpi-4c' branch 'current' ii armbian-config 24.5.5 all Armbian configuration utility ii armbian-firmware 24.5.6 all Armbian - Linux firmware ii armbian-plymouth-theme 24.5.5 all boot animation, logger and I/O multiplexer - Armbian theme ii hostapd 3:2.10-6~armbian22.02.3+1 arm64 IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator ii htop 3.1.0-0~armbian20.08.2+1 arm64 interactive processes viewer ii linux-base 4.6 all Linux image base package ii linux-dtb-current-rockchip64 24.5.3 arm64 Armbian Linux current DTBs in /boot/dtb-6.6.39-current-rockchip64 ii linux-headers-5.10.0-31-arm64 5.10.221-1 arm64 Header files for Linux 5.10.0-31-arm64 ii linux-headers-5.10.0-31-common 5.10.221-1 all Common header files for Linux 5.10.0-31 ii linux-headers-arm64 5.10.221-1 arm64 Header files for Linux arm64 configuration (meta-package) hi linux-image-5.10.0-31-arm64 5.10.221-1 arm64 Linux 5.10 for 64-bit ARMv8 machines (signed) ii linux-image-current-rockchip64 24.5.3 arm64 Armbian Linux current kernel image 6.6.39-current-rockchip64 ii linux-kbuild-5.10 5.10.221-1 arm64 Kbuild infrastructure for Linux 5.10 ii linux-libc-dev:arm64 23.02.2 arm64 Armbian Linux support headers for userspace development ii linux-u-boot-rockpi-4c-current 24.5.1 arm64 Das U-Boot for rockpi-4c ### Loaded modules: Module Size Used by dm_crypt 49152 1 trusted 12288 1 dm_crypt dm_mod 126976 3 dm_crypt xt_conntrack 12288 1 nft_chain_nat 12288 3 xt_MASQUERADE 16384 1 nf_nat 45056 2 nft_chain_nat,xt_MASQUERADE nf_conntrack_netlink 45056 0 nf_conntrack 118784 4 xt_conntrack,nf_nat,nf_conntrack_netlink,xt_MASQUERADE nf_defrag_ipv6 20480 1 nf_conntrack nf_defrag_ipv4 12288 1 nf_conntrack xfrm_user 40960 1 xfrm_algo 12288 1 xfrm_user xt_addrtype 12288 2 nft_compat 16384 4 nf_tables 225280 75 nft_compat,nft_chain_nat nfnetlink 16384 4 nft_compat,nf_conntrack_netlink,nf_tables br_netfilter 28672 0 bridge 241664 1 br_netfilter lz4hc 12288 0 lz4 12288 0 zram 32768 3 raid1 45056 1 snd_soc_hdmi_codec 20480 1 snd_soc_simple_card 20480 0 brcmfmac_wcc 12288 0 md_mod 151552 2 raid1 snd_soc_audio_graph_card 16384 0 snd_soc_simple_card_utils 24576 2 snd_soc_audio_graph_card,snd_soc_simple_card snd_soc_spdif_tx 12288 0 dw_hdmi_i2s_audio 12288 0 hci_uart 135168 0 panfrost 69632 0 dw_hdmi_cec 12288 0 gpu_sched 36864 1 panfrost drm_shmem_helper 16384 1 panfrost rk_crypto 28672 0 btqca 20480 1 hci_uart rng_core 16384 1 rk_crypto snd_soc_rockchip_i2s 24576 4 btsdio 16384 0 btrtl 28672 1 hci_uart btintel 40960 1 hci_uart hantro_vpu 249856 0 rockchip_vdec 77824 0 snd_soc_es8316 36864 1 brcmfmac 368640 1 brcmfmac_wcc btbcm 20480 1 hci_uart snd_soc_core 208896 7 snd_soc_spdif_tx,snd_soc_hdmi_codec,snd_soc_audio_graph_card,snd_soc_simple_card_utils,snd_soc_rockchip_i2s,snd_soc_simple_card,snd_soc_es8316 v4l2_vp9 20480 2 rockchip_vdec,hantro_vpu rockchip_rga 20480 0 brcmutil 16384 1 brcmfmac bluetooth 663552 7 btrtl,btqca,btsdio,btintel,hci_uart,btbcm videobuf2_dma_contig 20480 2 rockchip_vdec,hantro_vpu snd_compress 24576 1 snd_soc_core v4l2_h264 16384 2 rockchip_vdec,hantro_vpu snd_pcm_dmaengine 12288 1 snd_soc_core v4l2_mem2mem 24576 3 rockchip_vdec,hantro_vpu,rockchip_rga videobuf2_dma_sg 16384 1 rockchip_rga cfg80211 802816 1 brcmfmac realtek 32768 1 snd_pcm 106496 6 snd_soc_hdmi_codec,snd_compress,snd_soc_simple_card_utils,snd_soc_core,snd_soc_es8316,snd_pcm_dmaengine videobuf2_memops 16384 2 videobuf2_dma_contig,videobuf2_dma_sg videobuf2_v4l2 20480 4 rockchip_vdec,hantro_vpu,rockchip_rga,v4l2_mem2mem sg 28672 0 snd_timer 36864 1 snd_pcm videodev 229376 5 rockchip_vdec,videobuf2_v4l2,hantro_vpu,rockchip_rga,v4l2_mem2mem rfkill 24576 5 bluetooth,cfg80211 snd 77824 5 snd_soc_hdmi_codec,snd_timer,snd_compress,snd_soc_core,snd_pcm videobuf2_common 49152 8 rockchip_vdec,videobuf2_dma_contig,videobuf2_v4l2,hantro_vpu,rockchip_rga,videobuf2_dma_sg,v4l2_mem2mem,videobuf2_memops mc 53248 6 rockchip_vdec,videodev,videobuf2_v4l2,hantro_vpu,videobuf2_common,v4l2_mem2mem soundcore 12288 1 snd dwmac_rk 28672 0 stmmac_platform 20480 1 dwmac_rk stmmac 233472 3 stmmac_platform,dwmac_rk pcs_xpcs 20480 1 stmmac cpufreq_dt 16384 0 ip_tables 28672 0 x_tables 36864 5 xt_conntrack,nft_compat,xt_addrtype,ip_tables,xt_MASQUERADE autofs4 40960 2 ### nand-sata-install.log: ### Current system health: Time CPU n/a load %cpu %sys %usr %nice %io %irq Tcpu 23:45:28 --- 1.36 3% 1% 1% 0% 0% 0% 38.1 °C 23:45:29 --- 1.36 13% 5% 0% 0% 6% 0% 38.8 °C 23:45:29 --- 1.36 5% 4% 0% 0% 0% 0% 38.8 °C 23:45:29 --- 1.36 7% 5% 0% 0% 0% 0% 38.8 °C 23:45:30 --- 1.36 6% 5% 0% 0% 0% 0% 38.8 °C 23:45:30 --- 1.36 3% 1% 1% 0% 0% 0% 38.1 °C 23:45:31 --- 1.36 15% 14% 0% 0% 0% 0% 38.8 °C 23:45:31 --- 1.36 18% 12% 3% 0% 0% 1% 38.8 °C 23:45:31 --- 1.36 10% 2% 0% 0% 6% 0% 38.1 °C 23:45:32 --- 1.36 12% 6% 0% 0% 5% 0% 38.8 °C ### resolv.conf -rw-r--r-- 1 root root 82 Aug 4 22:13 /etc/resolv.conf # Generated by NetworkManager search mynetworksettings.com nameserver XXX.XXX.1.1 ### Current sysinfo: Linux 6.6.39-current-rockchip64 (*REDACTED*) 08/04/2024 _aarch64_ (6 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 1.08 0.00 1.74 0.47 0.00 96.70 Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read kB_wrtn kB_dscd mmcblk0 5.36 98.19 124.17 0.00 556727 704048 0 mmcblk0p1 5.33 97.59 124.17 0.00 553295 704048 0 mmcblk0boot0 0.03 0.13 0.00 0.00 760 0 0 mmcblk0boot1 0.03 0.13 0.00 0.00 760 0 0 sda 51.97 25080.47 364.52 0.00 142201730 2066762 0 sda1 51.94 25079.83 364.52 0.00 142198110 2066762 0 sdb 51.81 1.29 25441.61 0.00 7333 144249354 0 sdb1 51.79 0.87 25441.61 0.00 4929 144249354 0 md127 1.38 3.09 363.63 0.00 17520 2061704 0 zram0 0.03 0.63 0.00 0.00 3552 4 0 zram1 1.84 0.49 9.49 0.00 2768 53804 0 zram2 0.00 0.00 0.00 0.00 0 0 0 dm-0 1.31 1.31 362.87 0.00 7401 2057404 0 --procs-- -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu-------- r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 2852696 87652 758476 0 0 17 84 72 79 1 2 97 0 0 total used free shared buff/cache available Mem: 3.8Gi 249Mi 2.7Gi 6.0Mi 826Mi 3.4Gi Swap: 1.9Gi 0B 1.9Gi NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram0 lzo-rle 1.9G 4K 74B 12K 6 [SWAP] /dev/zram1 zstd 50M 1.6M 169.1K 748K 6 /var/log 23:45:32 up 1:34, 2 users, load average: 1.41, 1.34, 1.13 [ 11.029453] systemd[1]: Mounting Kernel Trace File System... [ 11.036976] systemd[1]: Starting Restore / save the current clock... [ 11.043059] systemd[1]: Starting Set the console keyboard layout... [ 11.049490] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 11.055273] systemd[1]: Starting Load Kernel Module configfs... [ 11.061097] systemd[1]: Starting Load Kernel Module drm... [ 11.067007] systemd[1]: Starting Load Kernel Module fuse... [ 11.074905] systemd[1]: Started Nameserver information manager. [ 11.076390] systemd[1]: Reached target Network (Pre). [ 11.078239] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 11.078532] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 11.085766] systemd[1]: Starting Load Kernel Modules... [ 11.092078] systemd[1]: Starting Remount Root and Kernel File Systems... [ 11.098340] systemd[1]: Starting Coldplug All udev Devices... [ 11.109477] systemd[1]: Mounted Huge Pages File System. [ 11.110442] systemd[1]: Mounted POSIX Message Queue File System. [ 11.111668] systemd[1]: Mounted Kernel Debug File System. [ 11.112610] systemd[1]: Mounted Kernel Trace File System. [ 11.115214] systemd[1]: Finished Restore / save the current clock. [ 11.118234] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 11.120119] systemd[1]: modprobe@configfs.service: Succeeded. [ 11.121741] systemd[1]: Finished Load Kernel Module configfs. [ 11.123734] systemd[1]: modprobe@drm.service: Succeeded. [ 11.125235] systemd[1]: Finished Load Kernel Module drm. [ 11.127108] systemd[1]: modprobe@fuse.service: Succeeded. [ 11.128707] systemd[1]: Finished Load Kernel Module fuse. [ 11.133332] systemd[1]: Finished Load Kernel Modules. [ 11.176850] systemd[1]: Mounting FUSE Control File System... [ 11.185205] systemd[1]: Mounting Kernel Configuration File System... [ 11.192924] EXT4-fs (mmcblk0p1): re-mounted 58156628-a1ec-48f7-971d-8c646a89e424 r/w. Quota mode: none. [ 11.193739] systemd[1]: Starting Apply Kernel Variables... [ 11.206913] systemd[1]: Finished Remount Root and Kernel File Systems. [ 11.208080] systemd[1]: Mounted FUSE Control File System. [ 11.208832] systemd[1]: Mounted Kernel Configuration File System. [ 11.211070] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 11.211572] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.219188] systemd[1]: Starting Load/Save Random Seed... [ 11.228196] systemd[1]: Starting Create System Users... [ 11.252755] systemd[1]: Finished Apply Kernel Variables. [ 11.299605] systemd[1]: Finished Load/Save Random Seed. [ 11.302490] systemd[1]: Finished Create System Users. [ 11.303527] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 11.308998] systemd[1]: Starting Create Static Device Nodes in /dev... [ 11.377873] systemd[1]: Finished Set the console keyboard layout. [ 11.380851] systemd[1]: Finished Create Static Device Nodes in /dev. [ 11.381677] systemd[1]: Reached target Local File Systems (Pre). [ 11.412109] systemd[1]: Mounting /tmp... [ 11.421698] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 11.430419] systemd[1]: Mounted /tmp. [ 11.539254] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 11.688082] systemd[1]: Finished Coldplug All udev Devices. [ 11.732929] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 11.744740] systemd[1]: Starting Show Plymouth Boot Screen... [ 11.754511] systemd[1]: Starting Wait for udev To Complete Device Initialization... [ 11.767593] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 11.818605] cpu cpu0: OPP table can't be empty [ 11.819767] systemd[1]: Started Show Plymouth Boot Screen. [ 11.820700] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ 11.821404] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. [ 11.821630] systemd[1]: Reached target Paths. [ 11.913384] systemd[1]: Found device /dev/ttyS2. [ 11.930685] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found [ 11.930708] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found [ 11.930861] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock [ 11.931113] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). [ 11.931128] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). [ 11.931141] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11). [ 11.931159] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). [ 11.931216] rk_gmac-dwmac fe300000.ethernet: clock input from PHY [ 11.947395] rk_gmac-dwmac fe300000.ethernet: init for RGMII [ 11.947901] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35 [ 11.947926] rk_gmac-dwmac fe300000.ethernet: DWMAC1000 [ 11.947938] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported [ 11.947948] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported [ 11.947957] rk_gmac-dwmac fe300000.ethernet: COE Type 2 [ 11.947967] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported [ 11.947976] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported [ 11.948112] rk_gmac-dwmac fe300000.ethernet: Normal descriptors [ 11.948124] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled [ 11.948133] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 11.956858] mc: Linux media interface: v0.10 [ 12.006164] videodev: Linux video capture interface: v2.00 [ 12.024337] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.037495] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 12.086013] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.088325] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.089990] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 12.106142] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 12.113244] rockchip-rga ff680000.rga: HW Version: 0x03.02 [ 12.116359] Bluetooth: Core ver 2.22 [ 12.119692] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0 [ 12.124169] NET: Registered PF_BLUETOOTH protocol family [ 12.124200] Bluetooth: HCI device and connection manager initialized [ 12.124230] Bluetooth: HCI socket layer initialized [ 12.124246] Bluetooth: L2CAP socket layer initialized [ 12.124312] Bluetooth: SCO socket layer initialized [ 12.152862] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 12.152889] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) [ 12.155279] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned. [ 12.163118] brcmfmac: F1 signature read @0x18000000=0x15294345 [ 12.165874] hantro-vpu ff650000.video-codec: Adding to iommu group 0 [ 12.167496] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video1 [ 12.167575] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9 [ 12.169043] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.radxa,rockpi4c.bin failed with error -2 [ 12.179711] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video2 [ 12.187906] usbcore: registered new interface driver brcmfmac [ 12.189377] rkvdec ff660000.video-codec: Adding to iommu group 1 [ 12.326236] rk3288-crypto ff8b0000.crypto: will run requests pump with realtime priority [ 12.326355] rk3288-crypto ff8b0000.crypto: Register ecb(aes) as ecb-aes-rk [ 12.326471] rk3288-crypto ff8b0000.crypto: Register cbc(aes) as cbc-aes-rk [ 12.326515] rk3288-crypto ff8b0000.crypto: Register ecb(des) as ecb-des-rk [ 12.326556] rk3288-crypto ff8b0000.crypto: Register cbc(des) as cbc-des-rk [ 12.326597] rk3288-crypto ff8b0000.crypto: Register ecb(des3_ede) as ecb-des3-ede-rk [ 12.326638] rk3288-crypto ff8b0000.crypto: Register cbc(des3_ede) as cbc-des3-ede-rk [ 12.326679] rk3288-crypto ff8b0000.crypto: Register sha1 as rk-sha1 [ 12.326722] rk3288-crypto ff8b0000.crypto: Register sha256 as rk-sha256 [ 12.326765] rk3288-crypto ff8b0000.crypto: Register md5 as rk-md5 [ 12.326806] rk3288-crypto ff8b0000.crypto: Register TRNG with sample=1200 [ 12.372159] panfrost ff9a0000.gpu: clock rate = 500000000 [ 12.375101] rk3288-crypto ff8b8000.crypto: will run requests pump with realtime priority [ 12.401373] Bluetooth: HCI UART driver ver 2.3 [ 12.401406] Bluetooth: HCI UART protocol H4 registered [ 12.401417] Bluetooth: HCI UART protocol BCSP registered [ 12.404734] Bluetooth: HCI UART protocol LL registered [ 12.404763] Bluetooth: HCI UART protocol ATH3K registered [ 12.404867] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 12.405167] Bluetooth: HCI UART protocol Intel registered [ 12.405545] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0 [ 12.405571] panfrost ff9a0000.gpu: features: 00000000,00000407, issues: 00000000,24040400 [ 12.405590] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 [ 12.405612] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1 [ 12.406923] Bluetooth: HCI UART protocol Broadcom registered [ 12.407046] Bluetooth: HCI UART protocol QCA registered [ 12.407059] Bluetooth: HCI UART protocol AG6XX registered [ 12.407149] Bluetooth: HCI UART protocol Marvell registered [ 12.412904] [drm] Initialized panfrost 1.2.0 20180908 for ff9a0000.gpu on minor 1 [ 12.523684] dw-apb-uart ff180000.serial: failed to request DMA [ 12.536248] asoc-audio-graph-card sound: ASoC: DAPM unknown pin Headphones [ 12.691413] asoc-audio-graph-card sound: ASoC: DAPM unknown pin Headphones [ 12.700558] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 12.701713] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Jun 16 2017 12:38:26 version XXX.XXX.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84 [ 12.724993] input: Analog Headphones as /devices/platform/sound/sound/card0/input0 [ 12.775738] block device autoloading is deprecated and will be removed. [ 12.800391] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 12.801321] Bluetooth: hci0: BCM: chip id 130 [ 12.802223] Bluetooth: hci0: BCM: features 0x0f [ 12.805097] Bluetooth: hci0: BCM4345C5 [ 12.805136] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0000 [ 12.807564] Bluetooth: hci0: BCM4345C5 'brcm/BCM4345C5.hcd' Patch [ 12.864598] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 13.008216] md/raid1:md127: not clean -- starting background reconstruction [ 13.008246] md/raid1:md127: active with 2 out of 2 mirrors [ 13.042626] systemd[1]: Started Load/Save RF Kill Switch Status. [ 13.086290] systemd[1]: Started Timer to wait for more drives before activating degraded array md127.. [ 13.086513] systemd[1]: Reached target Bluetooth. [ 13.086647] systemd[1]: Reached target Sound Card. [ 13.186104] md127: detected capacity change from 0 to 1953257472 [ 13.334598] systemd[1]: mdadm-last-resort@md127.timer: Succeeded. [ 13.334645] systemd[1]: Stopped Timer to wait for more drives before activating degraded array md127.. [ 13.364253] systemd[1]: Started MD array monitor. [ 13.404853] systemd[1]: Finished Wait for udev To Complete Device Initialization. [ 13.718326] Bluetooth: hci0: BCM: features 0x0f [ 13.722257] Bluetooth: hci0: BCM4345C5 Ampak_CL1 UART 37.4 MHz BT 5.0 [Version: Version: 0039.0089] [ 13.722297] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0089 [ 18.015740] systemd[1]: systemd-rfkill.service: Succeeded. [ 23.008896] platform sound-dit: deferred probe pending [ 101.050295] systemd[1]: dev-disk-by-uuid-1efe5ff5-c91e-4181-beb3-67d382095a5e.device: Job dev-disk-by-uuid-1efe5ff5-c91e-4181-beb3-67d382095a5e.device/start timed out. [ 101.050338] systemd[1]: Timed out waiting for device /dev/disk/by-uuid/1efe5ff5-c91e-4181-beb3-67d382095a5e. [ 101.050538] systemd[1]: Dependency failed for Cryptography Setup for luks-1efe5ff5-c91e-4181-beb3-67d382095a5e. [ 101.050651] systemd[1]: Dependency failed for Local Encrypted Volumes. [ 101.050756] systemd[1]: cryptsetup.target: Job cryptsetup.target/start failed with result 'dependency'. [ 101.050823] systemd[1]: systemd-cryptsetup@luks-1efe5ff5-c91e-4181-beb3-67d382095a5e.service: Job systemd-cryptsetup@luks-1efe5ff5-c91e-4181-beb3-67d382095a5e.service/start failed with result 'dependency'. [ 101.050869] systemd[1]: dev-disk-by-uuid-1efe5ff5-c91e-4181-beb3-67d382095a5e.device: Job dev-disk-by-uuid-1efe5ff5-c91e-4181-beb3-67d382095a5e.device/start failed with result 'timeout'. [ 101.050954] systemd[1]: dev-disk-by-uuid-30e48ec2-bb9f-49e0-afd1-71f5dccd2435.device: Job dev-disk-by-uuid-30e48ec2-bb9f-49e0-afd1-71f5dccd2435.device/start timed out. [ 101.050974] systemd[1]: Timed out waiting for device /dev/disk/by-uuid/30e48ec2-bb9f-49e0-afd1-71f5dccd2435. [ 101.051138] systemd[1]: Dependency failed for Cryptography Setup for luks-30e48ec2-bb9f-49e0-afd1-71f5dccd2435. [ 101.051284] systemd[1]: systemd-cryptsetup@luks-30e48ec2-bb9f-49e0-afd1-71f5dccd2435.service: Job systemd-cryptsetup@luks-30e48ec2-bb9f-49e0-afd1-71f5dccd2435.service/start failed with result 'dependency'. [ 101.051396] systemd[1]: dev-disk-by-uuid-30e48ec2-bb9f-49e0-afd1-71f5dccd2435.device: Job dev-disk-by-uuid-30e48ec2-bb9f-49e0-afd1-71f5dccd2435.device/start failed with result 'timeout'. [ 101.051548] systemd[1]: Reached target Block Device Preparation for /dev/mapper/luks-1efe5ff5-c91e-4181-beb3-67d382095a5e. [ 101.052379] systemd[1]: Reached target Block Device Preparation for /dev/mapper/luks-30e48ec2-bb9f-49e0-afd1-71f5dccd2435. [ 101.088408] systemd[1]: Starting Install ZFS kernel module... [ 101.089415] systemd[1]: Stopped target Block Device Preparation for /dev/mapper/luks-1efe5ff5-c91e-4181-beb3-67d382095a5e. [ 101.089623] systemd[1]: Stopped target Block Device Preparation for /dev/mapper/luks-30e48ec2-bb9f-49e0-afd1-71f5dccd2435. [ 101.100061] systemd[1]: zfs-load-module.service: Main process exited, code=exited, status=1/FAILURE [ 101.100924] systemd[1]: zfs-load-module.service: Failed with result 'exit-code'. [ 101.102723] systemd[1]: Failed to start Install ZFS kernel module. [ 101.102944] systemd[1]: Dependency failed for Import ZFS pools by cache file. [ 101.103070] systemd[1]: zfs-import-cache.service: Job zfs-import-cache.service/start failed with result 'dependency'. [ 101.103618] systemd[1]: Reached target ZFS pool import target. [ 101.103825] systemd[1]: Condition check resulted in Mount ZFS filesystems being skipped. [ 101.103918] systemd[1]: Reached target Local File Systems. [ 101.109267] systemd[1]: Starting Armbian leds state... [ 101.115048] systemd[1]: Starting Armbian ZRAM config... [ 101.121155] systemd[1]: Starting Set console font and keymap... [ 101.127712] systemd[1]: Starting Raise network interfaces... [ 101.134102] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 101.134557] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 101.134809] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 101.134956] systemd[1]: Condition check resulted in Wait for ZFS Volume (zvol) links in /dev being skipped. [ 101.135105] systemd[1]: Reached target ZFS volumes are ready. [ 101.150780] systemd[1]: Finished Set console font and keymap. [ 101.152479] systemd[1]: Received SIGRTMIN+20 from PID 270 (plymouthd). [ 101.158406] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ 101.218457] systemd[1]: Finished Armbian leds state. [ 101.322310] zram: Added device: zram0 [ 101.323687] zram: Added device: zram1 [ 101.324852] zram: Added device: zram2 [ 101.421341] zram0: detected capacity change from 0 to 3952888 [ 101.461798] Adding 1976440k swap on /dev/zram0. Priority:5 extents:1 across:1976440k SS [ 101.484675] systemd[1]: Finished Raise network interfaces. [ 101.696246] zram1: detected capacity change from 0 to 102400 [ 101.755534] systemd[1]: Finished Armbian ZRAM config. [ 101.797108] systemd[1]: Starting Armbian memory supported logging... [ 101.897210] EXT4-fs (zram1): mounted filesystem 24de4176-fb3a-49d5-bf49-baf1c2b1b99b r/w without journal. Quota mode: none. [ 101.897287] ext4 filesystem being mounted at /var/log supports timestamps until 2038-01-19 (0x7fffffff) [ 117.158724] systemd[1]: Finished Armbian memory supported logging. [ 117.188825] systemd[1]: Starting Journal Service... [ 117.595993] systemd[1]: Started Journal Service. [ 117.680099] systemd-journald[657]: Received client request to flush runtime journal. [ 118.809081] systemd-journald[657]: Received client request to relinquish /var/log/journal/515cf686f9604730835651798a8c6e08 access. [ 120.219836] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 120.229515] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) [ 120.229571] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found [ 120.229595] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW [ 120.231528] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode [ 124.295179] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 124.301982] Bridge firewalling registered [ 124.328027] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 125.022086] Initializing XFRM netlink socket [ 128.462731] systemd-journald[657]: Received client request to flush runtime journal. [ 129.138946] systemd-journald[657]: Received client request to relinquish /var/log/journal/515cf686f9604730835651798a8c6e08 access. [ 198.475560] systemd[2453]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 246.674030] systemd-journald[657]: Received client request to flush runtime journal. [ 246.750322] systemd-journald[657]: Received client request to relinquish /var/log/journal/515cf686f9604730835651798a8c6e08 access. [ 1146.740058] systemd-journald[657]: Received client request to flush runtime journal. [ 1146.808901] systemd-journald[657]: Received client request to relinquish /var/log/journal/515cf686f9604730835651798a8c6e08 access. [ 2046.709361] systemd-journald[657]: Received client request to flush runtime journal. [ 2046.789845] systemd-journald[657]: Received client request to relinquish /var/log/journal/515cf686f9604730835651798a8c6e08 access. [ 2946.702604] systemd-journald[657]: Received client request to flush runtime journal. [ 2946.775122] systemd-journald[657]: Received client request to relinquish /var/log/journal/515cf686f9604730835651798a8c6e08 access. [ 3846.684206] systemd-journald[657]: Received client request to flush runtime journal. [ 3846.776059] systemd-journald[657]: Received client request to relinquish /var/log/journal/515cf686f9604730835651798a8c6e08 access. [ 4184.598033] md: resync of RAID array md127 [ 4189.064476] device-mapper: uevent: version 1.0.3 [ 4189.065162] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 4212.546008] EXT4-fs (dm-0): mounted filesystem 5602eb7e-12b3-42fb-9798-1556b2a90df5 r/w with ordered data mode. Quota mode: none. [ 4746.765355] systemd-journald[657]: Received client request to flush runtime journal. [ 4746.826781] systemd-journald[657]: Received client request to relinquish /var/log/journal/515cf686f9604730835651798a8c6e08 access. [ 5462.651092] systemd-journald[657]: Received client request to flush runtime journal. [ 5462.716166] systemd-journald[657]: Received client request to relinquish /var/log/journal/515cf686f9604730835651798a8c6e08 access. vm.admin_reserve_kbytes = 8192 vm.compaction_proactiveness = 20 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.extfrag_threshold = 500 vm.hugetlb_shm_group = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 256 32 0 vm.max_map_count = 65530 vm.memfd_noexec = 0 vm.min_free_kbytes = 22528 vm.min_slab_ratio = 5 vm.min_unmapped_ratio = 1 vm.mmap_min_addr = 4096 vm.mmap_rnd_bits = 18 vm.mmap_rnd_compat_bits = 11 vm.nr_hugepages = 0 vm.nr_hugepages_mempolicy = 0 vm.nr_overcommit_hugepages = 0 vm.numa_stat = 1 vm.numa_zonelist_order = Node vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_high_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 121725 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 vm.zone_reclaim_mode = 0 ### interrupts: CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 18: 0 0 0 0 0 0 GICv3 25 Level vgic 20: 0 0 0 0 0 0 GICv3 27 Level kvm guest vtimer 23: 54633 65433 62030 49947 115779 61484 GICv3 30 Level arch_timer 25: 83504 64289 75597 60595 90417 72349 GICv3 113 Level rk_timer 31: 0 0 0 0 0 0 GICv3 37 Level ff6d0000.dma-controller 32: 0 0 0 0 0 0 GICv3 38 Level ff6d0000.dma-controller 33: 0 0 0 0 0 0 GICv3 39 Level ff6e0000.dma-controller 34: 0 0 0 0 0 0 GICv3 40 Level ff6e0000.dma-controller 35: 1236 0 0 0 0 0 GICv3 131 Level ttyS0 36: 693 0 0 0 0 0 GICv3 132 Level ttyS2 37: 0 0 0 0 0 0 GICv3 147 Level ff650800.iommu 38: 0 0 0 0 0 0 GICv3 149 Level ff660480.iommu 39: 0 0 0 0 0 0 GICv3 151 Level ff8f3f00.iommu, ff8f0000.vop 40: 0 0 0 0 0 0 GICv3 150 Level ff903f00.iommu, ff900000.vop 41: 0 0 0 0 0 0 GICv3 75 Level ff914000.iommu 42: 0 0 0 0 0 0 GICv3 76 Level ff924000.iommu 43: 66 0 0 0 0 0 GICv3 91 Level ff110000.i2c 44: 0 0 0 0 0 0 GICv3 66 Level ff130000.i2c 45: 61977 0 0 0 0 0 GICv3 68 Level ff160000.i2c 46: 429 0 0 0 0 0 GICv3 89 Level ff3c0000.i2c 47: 0 0 0 0 0 0 GICv3 88 Level ff3d0000.i2c 48: 0 0 0 0 0 0 GICv3 129 Level rockchip_thermal 49: 0 0 0 0 0 0 GICv3 152 Edge ff848000.watchdog 50: 9719 0 0 0 0 0 GICv3 96 Level dw-mci 51: 0 0 0 0 0 0 GICv3 97 Level dw-mci 52: 36031 0 0 0 0 0 GICv3 43 Level mmc0 53: 3 0 0 0 0 0 GICv3 94 Level ff100000.saradc 54: 0 0 0 0 0 0 GICv3-23 0 Level arm-pmu 55: 0 0 0 0 0 0 GICv3-23 1 Level arm-pmu 56: 0 0 0 0 0 0 rockchip_gpio_irq 7 Edge fe320000.mmc cd 57: 0 0 0 0 0 0 GICv3 59 Level rockchip_usb2phy 58: 0 0 0 0 0 0 GICv3 63 Level rockchip_usb2phy 59: 0 0 0 0 0 0 GICv3 137 Level xhci-hcd:usb1 60: 0 0 0 0 0 0 GICv3 142 Level xhci-hcd:usb3 61: 0 0 0 0 0 0 GICv3 58 Level ehci_hcd:usb5 62: 0 0 0 0 0 0 GICv3 62 Level ehci_hcd:usb7 63: 0 0 0 0 0 0 GICv3 60 Level ohci_hcd:usb6 64: 0 0 0 0 0 0 rockchip_gpio_irq 21 Level rk808 70: 0 0 0 0 0 0 rk808 5 Edge RTC alarm 74: 0 0 0 0 0 0 GICv3 64 Level ohci_hcd:usb8 75: 0 0 0 0 0 0 GICv3 81 Level pcie-sys 77: 154 0 0 0 0 0 GICv3 83 Level pcie-client 79: 0 0 0 0 0 0 ITS-MSI 0 Edge PCIe PME, aerdrv 80: 0 300801 0 0 0 0 ITS-MSI 524288 Edge ahci0 81: 0 0 0 0 0 0 ITS-MSI 524289 Edge ahci1 82: 0 0 0 0 0 0 ITS-MSI 524290 Edge ahci2 83: 0 0 0 0 166292 0 ITS-MSI 524291 Edge ahci3 84: 0 0 0 0 0 0 ITS-MSI 524292 Edge ahci4 88: 0 0 0 0 0 0 GICv3 55 Level ff940000.hdmi, dw-hdmi-cec 89: 25429 0 0 0 0 0 GICv3 44 Level eth0 90: 0 0 0 0 0 0 GICv3 87 Level ff680000.rga 91: 0 0 0 0 0 0 rockchip_gpio_irq 1 Level es8316 92: 0 0 0 0 0 0 GICv3 146 Level ff650000.video-codec 93: 0 0 0 0 0 0 GICv3 145 Level ff650000.video-codec 94: 335 0 0 0 0 0 rockchip_gpio_irq 3 Level brcmf_oob_intr 95: 0 0 0 0 0 0 GICv3 148 Level ff660000.video-codec 96: 0 0 0 0 0 0 GICv3 32 Level rk-crypto 97: 0 0 0 0 0 0 GICv3 167 Level rk-crypto 98: 0 0 0 0 0 0 GICv3 51 Level panfrost-gpu 99: 0 0 0 0 0 0 GICv3 53 Level panfrost-mmu 100: 6 0 0 0 0 0 rockchip_gpio_irq 4 Edge host_wake 101: 0 0 0 0 0 0 GICv3 52 Level panfrost-job 102: 0 0 0 0 0 0 rockchip_gpio_irq 0 Edge Headphone detection IPI0: 7051 6118 5124 6091 4565 4011 Rescheduling interrupts IPI1: 142253 90762 189514 163483 115662 95731 Function call interrupts IPI2: 0 0 0 0 0 0 CPU stop interrupts IPI3: 0 0 0 0 0 0 CPU stop (for crash dump) interrupts IPI4: 22657 24662 28699 29222 29184 28897 Timer broadcast interrupts IPI5: 0 0 0 0 0 0 IRQ work interrupts IPI6: 0 0 0 0 0 0 CPU wake-up interrupts Err: 0

@drock please sir can you share your images with gpu enabled, I am on OrangePi 3b v2.1 as well having same issues orangepi@orangepi3b:~$ sudo dmesg | grep -i mali [sudo] password for orangepi: [ 9.312425] mali fde60000.gpu: Kernel DDK version g18p0-01eac0 [ 9.312464] mali fde60000.gpu: IRQ JOB not found [ 9.312552] mali fde60000.gpu: IRQ MMU not found [ 9.312607] mali fde60000.gpu: IRQ GPU not found [ 9.312658] mali fde60000.gpu: Insufficient register space, will override to the required size [ 9.312699] mali fde60000.gpu: Register window unavailable [ 9.312716] mali fde60000.gpu: Failed to map registers [ 9.312733] mali fde60000.gpu: Register map failed error = -5 [ 9.312749] mali fde60000.gpu: Device initialization failed [ 9.313151] mali: probe of fde60000.gpu failed with error -5 [ 9.346431] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 406; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '18:53:42', on 'Aug 2 2024'. [ 9.347183] Mali: [ 9.347190] Mali device driver loaded [ 10.007994] panfrost fde60000.gpu: Looking up mali-supply from device tree

Hi, I'm trying to fully boot an Orange Pi 4 from a USB flash drive from Uboot's prompt before it actually loads the kernel from the SD card (The SD card already has a working image of Armbian installed, that's where the board pulled Uboot from and is booting from it). The SD card currently has Armbian_23.5.1_Orangepi4_jammy_current_6.1.30_gnome_desktop installed on it. The reason why I'm trying to boot the board from USB is that I want to try an image with Orange Pi 4's legacy kernel to be able to take advantage of its vendor Mali blob for performance comparison against the current open source Panfrost driver in mainline kernel. And that I don't have a separate SD card available now so I figured it'd be a good idea to flash an image onto a USB drive and make the board temporarily boot from USB instead. The drive has Armbian_21.08.1_Orangepi4_buster_legacy_4.4.213_xfce_desktop written onto. I thought it'd be as easy as just flashing an image onto the USB drive, get into Uboot's prompt by interrupting it via serial console and initialize the USB subsystem (usb start) then invoke the usbboot command and let it find the bootable part of the image on the drive then boot from it. Now, I'm not sure if that's a proper way to boot the board from USB, but seeing that Amlogic boards can do such thing (source: Starting Armbian from USB flash drive), I figured I should try it too. (if you have a better idea, I'd happily welcome it!) Uboot's version it's running on: U-Boot 2022.04-armbian (May 19 2024 - 19:21:57 +0000) That's when the problem arises, when I ran the usb start command, I get the following (I already have a keyboard + mouse receiver dongle plugged into the "standing" USB 2 port and a flash drive plugged into the lower port of the USB 3 ports): => usb start starting USB... Bus usb@fe380000: ehci_generic usb@fe380000: failed to get usb phy Port not available. Bus usb@fe3c0000: ehci_generic usb@fe3c0000: failed to get usb phy Port not available. Doesn't seem like it detected any USB devices... Nevertheless, I tried usb tree to see if there's anything, but no: => usb tree USB is stopped. Please issue 'usb start' first. I'm guessing there's something wrong with the device tree embedded in Uboot or am I missing something here that it can't start the USB subsystem to detect any USB devices attached? Do I have to make some modifications to Uboot or the device tree too so the kernel on the drive (in case Uboot successfully found the drive and booted that kernel instead) knows where it's actually booting from? I've attached a boot log up until the point I interrupted it and ran the two commands: uboot_log_usb_stopped.txt Any help would be greatly appreciated!

Hi there, I wanted to share with everyone here the final product - a gaming handheld we've designed from scratch in Solidworks. I've been working on this with a fellow Armbian contributor @GinKage for quite some time (probably over a year now... time really does fly) who has helped me learn a lot on the software side, which I wasn't really familiar with before I reached out to him. Despite it's shortcomings, I'm really happy with the v1 build. I hope you guys like it! Open source files can be found here, including CAD files, Armbian build files and more. https://github.com/StonedEdge/Retro-Lite-CM5 Retro Lite CM5: Radxa CM5 Gaming Handheld Specifications Hardware specifications 3D printable housing in PLA. Comfort grips for added ergonomics Radxa CM5 Compute Module (8GB RAM/64GB eMMC) SoC – Rockchip RK3588S octa-core processor with 4x Cortex‑A76 cores @ up to 2.4GHz, 4x Cortex‑A55 core @ 1.8GHz Arm Mali-G610 MP4 “Odin” GPU Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 H.264 AVC/MVC, 4Kp60 AV1, 1080p60 MPEG-2/-1, VC-1, VP8 Video encoder – 8Kp30 H.265/H.264 video encoder WiFi 6/Bluetooth 5.2 via PCIe E-key slot (Intel AX210) - https://www.intel.com/content/www/us/en/products/sku/204836/intel-wifi-6e-ax210-gig/specifications.html 6 layer carrier board with 3 B2B mezzanine connectors to interface with any Radxa CM5 module 5v boost rated at 3.5A continuous current RP2040 gamepad HID controller - complete with SDL mappings and evdev gyro support/mouse control via MPU6050 1280 x 720 (5.5" DSI IPS LCD): DSI video output on internal display Up to 4k HDMI video output via HDMI output Up to 4k DisplayPort Alternate Mode via Type-C USB 2.0/3.1 capable USB-C data transfer USB-C dual role port functionality (sink/source) Brightness and volume HUD adjustment. Brightness is adjusted by holding plus hotkey + down/up. Volume controlled either by volume buttons or plus hotkey + left right DPAD USB-C PD charging support via sink profiles supporting 5V/3A, 9V/3A, 12V/2A & 15V/2.6A (switch charger) via TPS65987D PD controller (see binary in TPS65987D folder). Recommended to use <12V for best charge and play performance Stereo Audio Output via i2s. Dual stereo speakers with ported chambers Headphone jack, with automatic switching 5000mAh lipo, providing around 1.5-5 hours of gameplay depending on load (to be upgraded to a larger size) Dual stacked shoulder buttons (L, R, LZ, RZ) with dual tact buttons for GameCube functionality (LR analog/LR digital) 2x hall effect analog sticks running at 3v3 Resin casted ABXY, DPAD, start+select, shoulder buttons Silicone membranes for nice button feel Software specifications Armbian GNOME desktop (Kernel 6.1.57 as of this post) Full upstream Rocknix support Hardware graphics support via Panfrost/OpenGLES (no Vulkan support… for now) Safe software/hardware shutdown (either from software or via button) Low power sleep mode Internal Components/Hardware/Random Pictures All of the components laid out - ready for assembly time! Internal PCBs - 6 layer boards designed myself, fitted with the compute module (v2.2 pictured) Handmaking all of the buttons with silicone and resin from a machined polished mould. 3D printed buttons really dont feel good so I wanted to make these special Final internal pictures before closing it up Front shot of Armbian desktop 😁 Flashed to the internal eMMC (non-socketable) with an SD card for added storage for running games via RetroPie Docking. DisplayPort functionality works over Type-C with my TPS65987D/TUSB546 PD extcon config. I have set it up to work with 2 lanes of DisplayPort and 2 lanes of USB 3.0 over Type-C Grips for added comfort. Because why not? Purple build! (GinKage)

The Panthor kernel driver and Mesa Panfrost driver have passed numerous test cases to achieve official conformance for OpenGL ES 3.1 on the Mali-G610 chip, ensuring reliable performance for users on Mesa version 24.1.1. View the full article

well h618 isn't a 'high performing' cpu, so don't expect too much in terms of opencl etc, probably nil. and even GPU support is probably sketchy https://docs.mesa3d.org/drivers/panfrost.html https://bakhi.github.io/mobileGPU/panfrost/ https://en.opensuse.org/ARM_Mali_GPU GPU is a most undocumented aspects of these socs, many time you are left with 'you are on your own', no docs, no help, no hints, no nothing you can try plain old NEON https://developer.arm.com/Architectures/Neon https://developer.arm.com/documentation/dht0002/a/Introducing-NEON/Developing-for-NEON/Automatic-vectorization this would probably 'just works'

Dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.7.12-edge-sunxi64 (armbian@next) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP Wed Apr 3 09:11:59 EDT 2024 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Transpeed 8K618-T [ 0.000000] OF: reserved mem: 0x0000000040000000..0x000000004007ffff (512 KiB) nomap non-reusable secmon@40000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x13f7c6040-0x13f7c7fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004007ffff] [ 0.000000] node 0: [mem 0x0000000040080000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] cma: Reserved 128 MiB at 0x00000000f8000000 on node -1 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 20 pages/cpu s42600 r8192 d31128 u81920 [ 0.000000] pcpu-alloc: s42600 r8192 d31128 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: root=UUID=99b3c530-4c30-4d65-84ef-58529001e6cf rootwait rootfstype=ext4 splash plymouth.ignore-serial-consoles console=ttyS0,115200 console=tty1 consoleblank=0 loglevel=1 ubootpart=7cd110b0-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=memory swapaccount=1 [ 0.000000] Unknown kernel command line parameters "splash ubootpart=7cd110b0-01 cgroup_enable=memory", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000f4000000-0x00000000f8000000] (64MB) [ 0.000000] Memory: 3874412K/4194304K available (14208K kernel code, 1452K rwdata, 4152K rodata, 3072K init, 523K bss, 188820K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000483] Console: colour dummy device 80x25 [ 0.000495] printk: legacy console [tty1] enabled [ 0.000613] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000627] pid_max: default: 32768 minimum: 301 [ 0.000712] LSM: initializing lsm=capability,yama,apparmor,integrity [ 0.000743] Yama: becoming mindful. [ 0.000830] AppArmor: AppArmor initialized [ 0.000928] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000953] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001974] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.002793] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.002988] rcu: Hierarchical SRCU implementation. [ 0.002994] rcu: Max phase no-delay instances is 1000. [ 0.004043] smp: Bringing up secondary CPUs ... [ 0.004546] Detected VIPT I-cache on CPU1 [ 0.004626] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.005168] Detected VIPT I-cache on CPU2 [ 0.005215] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005707] Detected VIPT I-cache on CPU3 [ 0.005753] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.005822] smp: Brought up 1 node, 4 CPUs [ 0.005835] SMP: Total of 4 processors activated. [ 0.005841] CPU features: detected: 32-bit EL0 Support [ 0.005847] CPU features: detected: CRC32 instructions [ 0.005894] CPU: All CPU(s) started at EL2 [ 0.005899] alternatives: applying system-wide alternatives [ 0.008059] devtmpfs: initialized [ 0.013496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.013517] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.017752] pinctrl core: initialized pinctrl subsystem [ 0.019028] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.020074] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.020206] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.020385] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.020421] audit: initializing netlink subsys (disabled) [ 0.020555] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.020893] thermal_sys: Registered thermal governor 'fair_share' [ 0.020899] thermal_sys: Registered thermal governor 'bang_bang' [ 0.020905] thermal_sys: Registered thermal governor 'step_wise' [ 0.020910] thermal_sys: Registered thermal governor 'user_space' [ 0.020948] cpuidle: using governor menu [ 0.021194] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.021289] ASID allocator initialised with 65536 entries [ 0.021470] Serial: AMBA PL011 UART driver [ 0.026244] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.029393] platform 6000000.hdmi: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.029721] platform 6000000.hdmi: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.029825] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/hdmi@6000000 [ 0.029885] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.029902] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.030058] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.030121] platform 6515000.lcd-controller: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.030356] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@7010000 [ 0.030452] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@7010000 [ 0.030551] platform 7010000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.031596] platform 6000000.hdmi: Fixed dependency cycle(s) with /connector [ 0.031663] platform connector: Fixed dependency cycle(s) with /soc/hdmi@6000000 [ 0.032590] Modules: 26864 pages in range for non-PLT usage [ 0.032596] Modules: 518384 pages in range for PLT usage [ 0.033262] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.033271] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.033278] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.033283] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.033290] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.033295] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.033302] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.033307] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.034030] cryptd: max_cpu_qlen set to 1000 [ 0.100156] raid6: neonx8 gen() 1796 MB/s [ 0.168228] raid6: neonx4 gen() 1846 MB/s [ 0.236300] raid6: neonx2 gen() 1753 MB/s [ 0.304378] raid6: neonx1 gen() 1507 MB/s [ 0.372459] raid6: int64x8 gen() 1148 MB/s [ 0.440518] raid6: int64x4 gen() 1346 MB/s [ 0.508615] raid6: int64x2 gen() 1172 MB/s [ 0.576676] raid6: int64x1 gen() 868 MB/s [ 0.576682] raid6: using algorithm neonx4 gen() 1846 MB/s [ 0.644738] raid6: .... xor() 1315 MB/s, rmw enabled [ 0.644745] raid6: using neon recovery algorithm [ 0.645218] iommu: Default domain type: Translated [ 0.645225] iommu: DMA domain TLB invalidation policy: strict mode [ 0.645487] SCSI subsystem initialized [ 0.645661] usbcore: registered new interface driver usbfs [ 0.645691] usbcore: registered new interface driver hub [ 0.645724] usbcore: registered new device driver usb [ 0.645999] pps_core: LinuxPPS API ver. 1 registered [ 0.646005] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.646020] PTP clock support registered [ 0.646438] ARM FF-A: FFA_VERSION returned not supported [ 0.646487] scmi_core: SCMI protocol bus registered [ 0.646679] Advanced Linux Sound Architecture Driver Initialized. [ 0.647438] NetLabel: Initializing [ 0.647444] NetLabel: domain hash size = 128 [ 0.647449] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.647515] NetLabel: unlabeled traffic allowed by default [ 0.647521] mctp: management component transport protocol core [ 0.647526] NET: Registered PF_MCTP protocol family [ 0.647958] clocksource: Switched to clocksource arch_sys_counter [ 0.648203] VFS: Disk quotas dquot_6.6.0 [ 0.648242] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.648793] AppArmor: AppArmor Filesystem Enabled [ 0.655658] NET: Registered PF_INET protocol family [ 0.655899] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.659214] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.659262] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.659279] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.659536] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.660663] TCP: Hash tables configured (established 32768 bind 32768) [ 0.660781] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.660875] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.661107] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.661368] Trying to unpack rootfs image as initramfs... [ 0.665245] Initialise system trusted keyrings [ 0.665299] Key type blacklist registered [ 0.665477] workingset: timestamp_bits=44 max_order=20 bucket_order=0 [ 0.665522] zbud: loaded [ 0.666044] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.667343] integrity: Platform Keyring initialized [ 0.730088] xor: automatically using best checksumming function 32regs [ 0.730114] async_tx: api initialized (async) [ 0.730127] Key type asymmetric registered [ 0.730133] Asymmetric key parser 'x509' registered [ 0.730247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.730514] io scheduler mq-deadline registered [ 0.730522] io scheduler kyber registered [ 0.730580] io scheduler bfq registered [ 0.742759] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.753116] loop: module loaded [ 0.755934] usbcore: registered new interface driver usb-storage [ 0.756387] mousedev: PS/2 mouse device common for all mice [ 0.757301] sun6i-rtc 7000000.rtc: registered as rtc0 [ 0.757327] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-02T00:00:09 UTC (86409) [ 0.757680] i2c_dev: i2c /dev entries driver [ 0.757934] mv64xxx_i2c 7081400.i2c: can't get pinctrl, bus recovery not supported [ 0.758387] axp20x-i2c 0-0036: AXP20x variant AXP313a found [ 0.758620] axp20x-i2c 0-0036: AXP20X driver loaded [ 0.759766] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.761060] sdhci: Secure Digital Host Controller Interface driver [ 0.761070] sdhci: Copyright(c) Pierre Ossman [ 0.761101] Synopsys Designware Multimedia Card Interface Driver [ 0.761717] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.762710] ledtrig-cpu: registered to indicate activity on CPUs [ 0.763041] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000002 [ 0.763436] hid: raw HID events driver (C) Jiri Kosina [ 0.763509] usbcore: registered new interface driver usbhid [ 0.763516] usbhid: USB HID core driver [ 0.764974] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.774984] NET: Registered PF_INET6 protocol family [ 1.565343] Freeing initrd memory: 17920K [ 1.606665] Segment Routing with IPv6 [ 1.606766] In-situ OAM (IOAM) with IPv6 [ 1.606878] NET: Registered PF_PACKET protocol family [ 1.606986] 8021q: 802.1Q VLAN Support v1.8 [ 1.607057] 9pnet: Installing 9P2000 support [ 1.607153] Key type dns_resolver registered [ 1.613973] registered taskstats version 1 [ 1.614108] Loading compiled-in X.509 certificates [ 1.621508] zswap: loaded using pool zstd/z3fold [ 1.630825] Key type .fscrypt registered [ 1.630841] Key type fscrypt-provisioning registered [ 1.632281] Btrfs loaded, zoned=yes, fsverity=no [ 1.632434] Key type encrypted registered [ 1.632446] AppArmor: AppArmor sha1 policy hashing enabled [ 1.632470] ima: No TPM chip found, activating TPM-bypass! [ 1.632498] ima: Allocated hash algorithm: sha1 [ 1.632529] ima: No architecture policies found [ 1.632595] evm: Initialising EVM extended attributes: [ 1.632600] evm: security.selinux [ 1.632605] evm: security.SMACK64 [ 1.632610] evm: security.SMACK64EXEC [ 1.632615] evm: security.SMACK64TRANSMUTE [ 1.632620] evm: security.SMACK64MMAP [ 1.632624] evm: security.apparmor [ 1.632629] evm: security.ima [ 1.632633] evm: security.capability [ 1.632637] evm: HMAC attrs: 0x1 [ 1.644152] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 1.651925] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 1.652490] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 1.652690] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 1.653349] printk: legacy console [ttyS0] disabled [ 1.653656] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 286, base_baud = 1500000) is a 16550A [ 1.653704] printk: legacy console [ttyS0] enabled [ 1.654911] 5000400.serial: ttyS1 at MMIO 0x5000400 (irq = 287, base_baud = 1500000) is a 16550A [ 1.655167] serial serial0: tty port ttyS1 registered [ 1.672003] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800080eddcd8) [ 1.672177] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800080ee2968) [ 1.672456] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800080edab00) [ 1.672550] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 1.674432] ehci-platform 5101000.usb: EHCI Host Controller [ 1.674465] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1 [ 1.674563] ehci-platform 5200000.usb: EHCI Host Controller [ 1.674582] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 2 [ 1.674596] ehci-platform 5101000.usb: irq 289, io mem 0x05101000 [ 1.674671] ehci-platform 5200000.usb: irq 290, io mem 0x05200000 [ 1.675222] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests [ 1.675240] ohci-platform 5200400.usb: Generic Platform OHCI controller [ 1.675263] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 3 [ 1.675344] ohci-platform 5200400.usb: irq 292, io mem 0x05200400 [ 1.687961] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 1.688218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 1.688232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.688242] usb usb1: Product: EHCI Host Controller [ 1.688250] usb usb1: Manufacturer: Linux 6.7.12-edge-sunxi64 ehci_hcd [ 1.688258] usb usb1: SerialNumber: 5101000.usb [ 1.688725] hub 1-0:1.0: USB hub found [ 1.688765] hub 1-0:1.0: 1 port detected [ 1.703952] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00 [ 1.704192] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 1.704206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.704215] usb usb2: Product: EHCI Host Controller [ 1.704223] usb usb2: Manufacturer: Linux 6.7.12-edge-sunxi64 ehci_hcd [ 1.704231] usb usb2: SerialNumber: 5200000.usb [ 1.704584] hub 2-0:1.0: USB hub found [ 1.704623] hub 2-0:1.0: 1 port detected [ 1.736169] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.07 [ 1.736183] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.736193] usb usb3: Product: Generic Platform OHCI controller [ 1.736202] usb usb3: Manufacturer: Linux 6.7.12-edge-sunxi64 ohci_hcd [ 1.736210] usb usb3: SerialNumber: 5200400.usb [ 1.736572] hub 3-0:1.0: USB hub found [ 1.736613] hub 3-0:1.0: 1 port detected [ 1.879986] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 1.880008] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 4 [ 1.880103] ohci-platform 5101400.usb: irq 291, io mem 0x05101400 [ 1.880146] musb-hdrc musb-hdrc.2.auto: MUSB HDRC host driver [ 1.880165] musb-hdrc musb-hdrc.2.auto: new USB bus registered, assigned bus number 5 [ 1.880373] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 1.880386] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.880396] usb usb5: Product: MUSB HDRC host driver [ 1.880403] usb usb5: Manufacturer: Linux 6.7.12-edge-sunxi64 musb-hcd [ 1.880411] usb usb5: SerialNumber: musb-hdrc.2.auto [ 1.880764] hub 5-0:1.0: USB hub found [ 1.880804] hub 5-0:1.0: 1 port detected [ 1.883234] sun50i_cpufreq_nvmem: Using CPU speed bin speed0 [ 1.884893] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 1.885911] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800080eddcd8) [ 1.886005] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 1.886064] sunxi-mmc 4020000.mmc: Got CD GPIO [ 1.886138] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800080ee2968) [ 1.886376] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800080edab00) [ 1.886468] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 1.888188] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800080eddcd8) [ 1.888358] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800080ee2968) [ 1.888549] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800080edab00) [ 1.888622] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 1.889556] of_cfs_init [ 1.889631] of_cfs_init: OK [ 1.889710] clk: Disabling unused clocks [ 1.889802] ALSA device list: [ 1.889810] No soundcards found. [ 1.911239] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 1.911370] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 1.911517] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 1.912110] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800080eddcd8) [ 1.912265] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800080ee2968) [ 1.912465] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800080edab00) [ 1.912539] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 1.913989] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800080eddcd8) [ 1.914139] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800080ee2968) [ 1.914318] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800080edab00) [ 1.914380] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 1.944229] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.07 [ 1.944243] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.944253] usb usb4: Product: Generic Platform OHCI controller [ 1.944262] usb usb4: Manufacturer: Linux 6.7.12-edge-sunxi64 ohci_hcd [ 1.944270] usb usb4: SerialNumber: 5101400.usb [ 1.944766] hub 4-0:1.0: USB hub found [ 1.944810] hub 4-0:1.0: 1 port detected [ 1.946033] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800080eddcd8) [ 1.946221] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800080ee2968) [ 1.946516] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800080edab00) [ 1.946640] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 1.946754] Freeing unused kernel memory: 3072K [ 1.946830] Run /init as init process [ 1.946837] with arguments: [ 1.946843] /init [ 1.946850] splash [ 1.946856] with environment: [ 1.946861] HOME=/ [ 1.946867] TERM=linux [ 1.946873] ubootpart=7cd110b0-01 [ 1.946879] cgroup_enable=memory [ 1.947102] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.950000] mmc1: new high speed SDXC card at address aaaa [ 1.950771] mmcblk1: mmc1:aaaa SC64G 59.5 GiB [ 1.954191] mmcblk1: p1 [ 1.955539] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800080eddcd8) [ 1.955785] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800080ee2968) [ 1.956084] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800080edab00) [ 1.956199] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.008184] mmc0: new high speed SDIO card at address 0001 [ 2.136022] mmc2: new HS200 MMC card at address 0001 [ 2.136987] mmcblk2: mmc2:0001 95D000 58.7 GiB [ 2.140257] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 [ 2.144061] mmcblk2boot0: mmc2:0001 95D000 4.00 MiB [ 2.145609] mmcblk2boot1: mmc2:0001 95D000 4.00 MiB [ 2.147774] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800080eddcd8) [ 2.148062] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800080ee2968) [ 2.148344] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800080edab00) [ 2.148455] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.347060] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800080eddcd8) [ 2.347347] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800080ee2968) [ 2.347651] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800080edab00) [ 2.347765] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.348164] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.351839] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin [ 2.352424] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.352797] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800080edccc0) [ 2.353548] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.353590] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1 [ 2.422618] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pa not found, using dummy regulator [ 2.422948] dwmac-sun8i 5030000.ethernet: IRQ eth_wake_irq not found [ 2.422961] dwmac-sun8i 5030000.ethernet: IRQ eth_lpi not found [ 2.423161] dwmac-sun8i 5030000.ethernet: supply phy-io not found, using dummy regulator [ 2.423357] dwmac-sun8i 5030000.ethernet: PTP uses main clock [ 2.423384] dwmac-sun8i 5030000.ethernet: Current syscon value is not the default 53fe1 (expect 50000) [ 2.429195] dwmac-sun8i 5030000.ethernet: No HW DMA feature register supported [ 2.429223] dwmac-sun8i 5030000.ethernet: RX Checksum Offload Engine supported [ 2.429231] dwmac-sun8i 5030000.ethernet: COE Type 2 [ 2.429241] dwmac-sun8i 5030000.ethernet: TX Checksum insertion supported [ 2.429249] dwmac-sun8i 5030000.ethernet: Normal descriptors [ 2.429257] dwmac-sun8i 5030000.ethernet: Chain mode enabled [ 2.572202] dwmac-sun8i 5030000.ethernet end0: renamed from eth0 [ 2.904356] Console: switching to colour frame buffer device 160x45 [ 2.953306] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 3.825598] EXT4-fs (mmcblk1p1): mounted filesystem 99b3c530-4c30-4d65-84ef-58529001e6cf ro with writeback data mode. Quota mode: none. [ 4.739738] systemd[1]: System time before build time, advancing clock. [ 4.785530] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.785570] systemd[1]: Detected architecture arm64. [ 4.792079] systemd[1]: Hostname set to <transpeed-8k618-t>. [ 5.833905] systemd[1]: Queued start job for default target graphical.target. [ 5.859773] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 5.861829] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 5.863375] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 5.864470] systemd[1]: Created slice user.slice - User and Session Slice. [ 5.864880] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 5.865778] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 5.865941] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0... [ 5.866158] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 5.866558] systemd[1]: Reached target slices.target - Slice Units. [ 5.866749] systemd[1]: Reached target swap.target - Swaps. [ 5.866904] systemd[1]: Reached target time-set.target - System Time Set. [ 5.867288] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 5.884408] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. [ 5.885406] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 5.885961] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 5.886312] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 5.887387] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 5.887913] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 5.888546] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 5.889266] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 5.889770] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 5.893974] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 5.898407] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 5.903250] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 5.904084] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 5.904960] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 5.911877] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 5.917127] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 5.922575] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 5.928400] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 5.937070] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 5.943221] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 5.949862] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 5.956508] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 5.963885] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 5.968711] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 5.980478] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 5.986238] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 5.992051] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 5.999890] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 6.001514] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 6.002486] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 6.004025] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 6.006513] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 6.007800] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.008392] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 6.008874] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.009687] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 6.011677] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 6.012651] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 6.014389] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.015440] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 6.017496] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 6.018596] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 6.020845] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 6.021828] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 6.028564] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 6.029262] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 6.041210] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 6.065420] fuse: init (API version 7.39) [ 6.067862] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 6.070299] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.071031] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 6.088934] EXT4-fs (mmcblk1p1): re-mounted 99b3c530-4c30-4d65-84ef-58529001e6cf r/w. Quota mode: none. [ 6.092564] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 6.098249] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 6.111441] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 6.113389] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 6.114680] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 6.119559] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 6.127185] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 6.161911] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 6.202143] systemd[1]: Finished systemd-sysusers.service - Create System Users. [ 6.234729] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 6.304991] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ 6.328775] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... [ 6.381944] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 6.383628] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. [ 6.485735] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. [ 6.494781] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... [ 6.501712] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... [ 6.520353] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. [ 6.604750] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. [ 6.638676] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... [ 6.851254] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. [ 6.854404] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. [ 6.855732] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). [ 6.861354] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. [ 6.861685] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 6.984976] mc: Linux media interface: v0.10 [ 7.021450] panfrost 1800000.gpu: clock rate = 432000000 [ 7.021488] panfrost 1800000.gpu: bus_clock rate = 200000000 [ 7.050831] panfrost 1800000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0 [ 7.050860] panfrost 1800000.gpu: features: 00000000,000027f7, issues: 00000000,00000400 [ 7.050869] panfrost 1800000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7 [ 7.050878] panfrost 1800000.gpu: shader_present=0x1 l2_present=0x1 [ 7.080515] videodev: Linux video capture interface: v2.00 [ 7.088232] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1 [ 7.335775] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 7.343493] sun50i-di 1420000.deinterlace: Device registered as /dev/video0 [ 7.355566] cedrus 1c0e000.video-codec: Device registered as /dev/video1 [ 7.376713] Registered IR keymap rc-empty [ 7.376843] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 7.377007] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 7.377134] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input0 [ 7.427869] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 7.448847] ahub_dam-snd-soc-dummy-dai: substream ahub_dam-snd-soc-dummy-dai has no playback, no capture [ 7.448878] sunxi-snd-mach soc:ahub_dam_mach: ASoC: can't create pcm ahub_dam-snd-soc-dummy-dai :-22 [ 7.449132] sunxi-snd-mach: probe of soc:ahub_dam_mach failed with error -22 [ 7.474871] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.486116] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.486778] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 7.580298] Bluetooth: Core ver 2.22 [ 7.580394] NET: Registered PF_BLUETOOTH protocol family [ 7.580399] Bluetooth: HCI device and connection manager initialized [ 7.580417] Bluetooth: HCI socket layer initialized [ 7.580428] Bluetooth: L2CAP socket layer initialized [ 7.580442] Bluetooth: SCO socket layer initialized [ 7.581395] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 7.652003] random: crng init done [ 7.671935] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4335-sdio for chip BCM4335/1 [ 7.685194] Bluetooth: HCI UART driver ver 2.3 [ 7.685226] Bluetooth: HCI UART protocol H4 registered [ 7.685231] Bluetooth: HCI UART protocol BCSP registered [ 7.685335] Bluetooth: HCI UART protocol LL registered [ 7.685341] Bluetooth: HCI UART protocol ATH3K registered [ 7.685371] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 7.704734] Bluetooth: HCI UART protocol Intel registered [ 7.720247] Bluetooth: HCI UART protocol Broadcom registered [ 7.720313] Bluetooth: HCI UART protocol QCA registered [ 7.720320] Bluetooth: HCI UART protocol AG6XX registered [ 7.720354] Bluetooth: HCI UART protocol Marvell registered [ 7.731141] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4335-sdio.clm_blob failed with error -2 [ 7.751147] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed. [ 7.825459] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 7.825689] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 7.856486] systemd[1]: Mounting tmp.mount - /tmp... [ 7.863851] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... [ 7.868687] systemd[1]: Mounted tmp.mount - /tmp. [ 7.870095] systemd[1]: Reached target local-fs.target - Local File Systems. [ 7.875745] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... [ 7.882054] systemd[1]: Starting console-setup.service - Set console font and keymap... [ 7.888452] systemd[1]: Starting networking.service - Raise network interfaces... [ 7.894688] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... [ 7.934378] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... [ 7.934793] systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id). [ 7.936568] systemd[1]: Finished console-setup.service - Set console font and keymap. [ 7.938208] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. [ 7.938957] systemd[1]: Received SIGRTMIN+20 from PID 229 (plymouthd). [ 8.033266] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. [ 8.034597] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 458 (systemd-binfmt) [ 8.048975] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). [ 8.076627] systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System... [ 8.077388] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 8.083142] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 8.089577] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 8.096949] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 8.097397] systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id). [ 8.099044] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 8.099723] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 8.104240] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 8.104862] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 8.105756] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 8.109007] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 8.110096] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 8.111536] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 8.118883] systemd[1]: Mounted proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System. [ 8.128270] systemd[1]: Finished systemd-binfmt.service - Set Up Additional Binary Formats. [ 8.432148] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. [ 8.447194] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). [ 8.447780] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 8.472731] systemd[1]: Starting brltty.service - Braille Device Support... [ 8.479684] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 8.486692] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 8.493842] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 8.494453] systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id). [ 8.503360] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 8.504653] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 8.507484] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 8.508398] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 8.510392] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 8.511070] zram: Added device: zram0 [ 8.511152] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 8.511420] zram: Added device: zram1 [ 8.511714] zram: Added device: zram2 [ 8.513020] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 8.516341] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 8.656368] zram0: detected capacity change from 0 to 4026480 [ 8.659238] systemd[1]: Finished networking.service - Raise network interfaces. [ 8.727670] Adding 2013236k swap on /dev/zram0. Priority:5 extents:1 across:2013236k SS [ 8.999057] zram1: detected capacity change from 0 to 102400 [ 9.073875] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. [ 9.120783] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... [ 9.202620] EXT4-fs (zram1): mounted filesystem 2ad1d28f-20e7-4d84-90bd-c72360d7f107 r/w without journal. Quota mode: none. [ 9.415227] systemd[1]: Started brltty.service - Braille Device Support. [ 9.441171] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input1 [ 9.901754] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 9.901772] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 9.902026] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4335/1 wl0: Mar 24 2013 20:36:01 version 6.30.171.24.20 (B0 Station/P2P) [ 9.987983] Bluetooth: hci1: command 0x0c03 tx timeout [ 9.988039] Bluetooth: hci1: BCM: Reset failed (-110) [ 11.830452] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. [ 11.860812] systemd[1]: Starting systemd-journald.service - Journal Service... [ 12.040061] systemd[1]: Started systemd-journald.service - Journal Service. [ 12.128251] systemd-journald[642]: Received client request to flush runtime journal. [ 12.462088] RPC: Registered named UNIX socket transport module. [ 12.462110] RPC: Registered udp transport module. [ 12.462114] RPC: Registered tcp transport module. [ 12.462118] RPC: Registered tcp-with-tls transport module. [ 12.462122] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.325627] systemd-journald[642]: Received client request to relinquish /var/log/journal/038dd8d2df4b4d8688a4073573fdffb6 access. [ 14.728474] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.728499] Bluetooth: BNEP filters: protocol multicast [ 14.728518] Bluetooth: BNEP socket layer initialized [ 17.332127] dwmac-sun8i 5030000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 17.394854] dwmac-sun8i 5030000.ethernet end0: PHY [stmmac-0:00] driver [Allwinner AC200 EPHY] (irq=POLL) [ 17.394893] dwmac-sun8i 5030000.ethernet end0: No Safety Features support found [ 17.394903] dwmac-sun8i 5030000.ethernet end0: No MAC Management Counters available [ 17.394912] dwmac-sun8i 5030000.ethernet end0: PTP not supported by HW [ 17.395303] dwmac-sun8i 5030000.ethernet end0: configuring for phy/rmii link mode [ 28.214321] hdmi-audio-codec hdmi-audio-codec.5.auto: Only one simultaneous stream supported! [ 28.214353] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -22 [ 36.001852] hdmi-audio-codec hdmi-audio-codec.5.auto: Only one simultaneous stream supported! [ 36.001879] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -22

Maybe the panfork was present in my system and slowing down? I dont know, but i think that not. Panfrost was active and the problem must be drm is better in mainline.

Mesa 24.1 is out, and the graphics team at Collabora has been working hard to bring a slew of new features and bug fixes to Panfrost, Zink, NVK, and Mesa in general. Here's a look at their contributions for this release cycle. View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] Documentation summary for feature / change Add new user to render group, otherwise the non-root user do not have access /dev/dri/renderD128 on RK3399. When login using non-root user to the desktop environment, the GPU acceleration does not work. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Test A Login to the desktop environment using non-root user, glxinfo -B shows the right render device. name of display: :10.0 display: :10 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer): Vendor: Panfrost (0xffffffff) Device: Mali-T860 (Panfrost) (0xffffffff) Version: 22.3.6 Accelerated: yes Video memory: 3860MB Unified memory: yes Preferred profile: core (0x1) Max core profile version: 3.1 Max compat profile version: 3.1 Max GLES1 profile version: 1.1 Max GLES[23] profile version: 3.1 OpenGL vendor string: Panfrost OpenGL renderer string: Mali-T860 (Panfrost) OpenGL core profile version string: 3.1 Mesa 22.3.6 OpenGL core profile shading language version string: 1.40 OpenGL core profile context flags: (none) OpenGL version string: 3.1 Mesa 22.3.6 OpenGL shading language version string: 1.40 OpenGL context flags: (none) OpenGL ES profile version string: OpenGL ES 3.1 Mesa 22.3.6 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10 Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

@usual userHi, I solved this problem. As you said before, the GPU is out of box for using. But I just test `glxinfo -B` using `Xvfb`, which is a virtual desktop, so it always shows `llvmpipe`. Now I try to use xrdp after searching in our forum. Thanks for your help!!!!!!!!!!!!!! name of display: :11.0 display: :11 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer): Vendor: Panfrost (0xffffffff) Device: Mali-T860 (Panfrost) (0xffffffff) Version: 22.3.6 (just using the preinstalled by armbian) Accelerated: yes Video memory: 3860MB Unified memory: yes Preferred profile: core (0x1) Max core profile version: 3.1 Max compat profile version: 3.1 Max GLES1 profile version: 1.1 Max GLES[23] profile version: 3.1 OpenGL vendor string: Panfrost OpenGL renderer string: Mali-T860 (Panfrost) OpenGL core profile version string: 3.1 Mesa 22.3.6 OpenGL core profile shading language version string: 1.40 OpenGL core profile context flags: (none) OpenGL version string: 3.1 Mesa 22.3.6 OpenGL shading language version string: 1.40 OpenGL context flags: (none) OpenGL ES profile version string: OpenGL ES 3.1 Mesa 22.3.6 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10

Bro, I want to give up now. I have checked in the documentation of Debian. All the requirements that GPU works normally have been fulfilled, I have no idea why GPU still does not work. 1. Panfrost [ 4390.653912] panfrost ff9a0000.gpu: clock rate = 500000000 [ 4390.657185] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0 [ 4390.657223] panfrost ff9a0000.gpu: features: 00000000,00000407, issues: 00000000,24040400 [ 4390.657240] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 [ 4390.657260] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1 [ 4390.660559] [drm] Initialized panfrost 1.2.0 20180908 for ff9a0000.gpu on minor 1 2. Mesa name of display: :1.0 display: :1 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer): Vendor: Mesa/X.org (0xffffffff) Device: llvmpipe (LLVM 15.0.6, 128 bits) (0xffffffff) Version: 22.3.6 Accelerated: no Video memory: 3860MB Unified memory: yes Preferred profile: core (0x1) Max core profile version: 4.5 Max compat profile version: 4.5 Max GLES1 profile version: 1.1 Max GLES[23] profile version: 3.2 OpenGL vendor string: Mesa/X.org OpenGL renderer string: llvmpipe (LLVM 15.0.6, 128 bits) OpenGL core profile version string: 4.5 (Core Profile) Mesa 22.3.6 OpenGL core profile shading language version string: 4.50 OpenGL core profile context flags: (none) OpenGL core profile profile mask: core profile OpenGL version string: 4.5 (Compatibility Profile) Mesa 22.3.6 OpenGL shading language version string: 4.50 OpenGL context flags: (none) OpenGL profile mask: compatibility profile OpenGL ES profile version string: OpenGL ES 3.2 Mesa 22.3.6 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20 3. Device Tree &gpu { status = "okay"; mali-supply = <&vdd_gpu>; };