Search the Community
Showing results for tags 'bananapim5'.
-
new release date 8/21, boot goes thru first boot stuff ok, but when it starts the gui, hdmi dies and monitor shuts off, no ssh access either.Tried to dl xfce version, won't. Advise gheskett@shentel.net Earleir image worked fine until update this morning, is now stuck in uboot loop forever. Thanks -
Hi! I try to use GPIO on BananaPi M5 board. But interface doesn't work. Armbian 23.05.1 Jammy with Linux 6.1.30-meson64. /boot/armbianEnv.txt: verbosity=1 console=both overlay_prefix=meson fdtfile=amlogic/meson-sm1-bananapi-m5.dtb rootdev=UUID=d099eb25-cf52-43fb-b826-535b9109637f rootfstype=ext4 overlays=w1-gpio usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u m5@bananapim5:~$ dmesg | grep w1 [ 7.568386] w1-gpio onewire@0: gpio_request (pin) failed [ 7.607814] w1-gpio onewire@0: gpio_request (pin) failed [ 7.620109] w1-gpio onewire@0: gpio_request (pin) failed [ 7.662444] w1-gpio onewire@0: gpio_request (pin) failed [ 7.671512] w1-gpio onewire@0: gpio_request (pin) failed [ 7.677156] w1-gpio onewire@0: gpio_request (pin) failed [ 7.689428] w1-gpio onewire@0: gpio_request (pin) failed [ 7.693341] w1-gpio onewire@0: gpio_request (pin) failed [ 7.711606] w1-gpio onewire@0: gpio_request (pin) failed [ 7.714019] w1-gpio onewire@0: gpio_request (pin) failed [ 7.784669] w1-gpio onewire@0: gpio_request (pin) failed [ 7.836363] w1-gpio onewire@0: gpio_request (pin) failed [ 7.877654] w1-gpio onewire@0: gpio_request (pin) failed [ 7.915447] w1-gpio onewire@0: gpio_request (pin) failed [ 7.975862] w1-gpio onewire@0: gpio_request (pin) failed [ 7.983126] w1-gpio onewire@0: gpio_request (pin) failed [ 18.143361] w1-gpio onewire@0: gpio_request (pin) failed Have any ideas?
-
Hello All, I spent mainly a week figuring out why it was a nightmare with cinnamon on debian I thought it was a matter of cinnamon version and/or mesa version of panfrost but it was a modeline detection problem from xorg. After trying my luck I finally discover where the bad duck resided on debian versions : - bullseye who was lagging , managing to use mali accel but overflowded with log errors - bookworm was loosing HDMI signal just after login in.. I will only talk about bookworm In fact, cinnamon internal xrandr, tool who detect the screen modelines, fails to access and to grab screen EDID modelines like xrandr did. it results it acts like it was in headless mode. Taking this into account I reinstalled the xorg-dummy-video pacakge and my /etc/X11/xorg.conf.d/01-armbian_defaults.conf l provided in then it succeed to login in low res. 720x480 declared in /boot/armbianEnv.txt. Fromcinnamon it is impossible to change the resolution display, the display tool did not react in cinnamon-settings, it crashes. I have to use the alternate arandr. to change the screen resolution on each reboot -
Banani Pi M5, Armbian_23.02.2_Bananapim5_bullseye_current_6.1.11_xfce_desktop into SD card, USB drive connected and auto mounted in fstab. Boot loop looking for system into USB. I have to disconnect USB then it boots up from SD. Any help?
-
Support file: https://paste.armbian.com/enivosames I have connected an LCD touch display via HDMI and USB to the M5. The display shows messages during booting or shutdown but then "freezes" leaving the last few lines of the boot process displayed but does not show the console or anything else. What am I missing?
