Search the Community

Installed: Armbian_23.11.1_Orangepi5-plus_bookworm_edge_6.7.0-rc1 The analog device is visible, but there's no sound from the headphone jack. The hdmi device is not visible. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Analog [Analog], device 0: fe470000.i2s-es8328-hifi-analog es8328-hifi-analog-0 [fe470000.i2s-es8328-hifi-analog es8328-hifi-analog-0] Subdevices: 1/1 Subdevice #0: subdevice #0 There is no sound when I play a test file: aplay -D hw:0,0 /usr/share/sounds/alsa/Noise.wav Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono aplay: set_params:1358: Channels count non available I've looked in the journal log but nothing stands out to me. Sound doesn't appear to be muted, I added amixer output below. What do I do next? amixer output: Simple mixer control 'PCM',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 192 Front Left: 192 [100%] [0.00dB] Front Right: 192 [100%] [0.00dB] Simple mixer control 'Mic PGA',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 8 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'Capture Digital',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 192 Front Left: 0 [0%] [-96.00dB] Front Right: 0 [0%] [-96.00dB] Simple mixer control 'Capture Polarity',0 Capabilities: enum Items: 'Normal' 'L Invert' 'R Invert' 'L + R Invert' Item0: 'Normal' Simple mixer control 'Capture ZC',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'DAC Deemphasis',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Differential Mux',0 Capabilities: enum Items: 'Line 1' 'Line 2' Item0: 'Line 1' Simple mixer control 'Left Line Mux',0 Capabilities: enum Items: 'Line 1' 'Line 2' 'PGA' 'Differential' Item0: 'Line 1' Simple mixer control 'Left Mixer',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Left Mixer Left Bypass',0 Capabilities: volume volume-joined pswitch pswitch-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 7 Mono: 0 [0%] [-15.00dB] Playback [off] Simple mixer control 'Left Mixer Right',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Left Mixer Right Bypass',0 Capabilities: volume volume-joined pswitch pswitch-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 7 Mono: 2 [29%] [-9.00dB] Playback [off] Simple mixer control 'Left PGA Mux',0 Capabilities: enum Items: 'Line 1' 'Line 2' 'Line 3' 'Differential' Item0: 'Line 1' Simple mixer control 'Output 1',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 36 Mono: Front Left: Playback 0 [0%] [-30.00dB] Front Right: Playback 0 [0%] [-30.00dB] Simple mixer control 'Output 2',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 36 Mono: Front Left: Playback 0 [0%] [-30.00dB] Front Right: Playback 0 [0%] [-30.00dB] Simple mixer control 'Right Line Mux',0 Capabilities: enum Items: 'Line 1' 'Line 2' 'PGA' 'Differential' Item0: 'Line 1' Simple mixer control 'Right Mixer',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Right Mixer Left',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Right Mixer Left Bypass',0 Capabilities: volume volume-joined pswitch pswitch-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 7 Mono: 2 [29%] [-9.00dB] Playback [off] Simple mixer control 'Right Mixer Right Bypass',0 Capabilities: volume volume-joined pswitch pswitch-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 7 Mono: 0 [0%] [-15.00dB] Playback [off] Simple mixer control 'Right PGA Mux',0 Capabilities: enum Items: 'Line 1' 'Line 2' 'Line 3' 'Differential' Item0: 'Line 1' Simple mixer control 'Route',0 Capabilities: enum Items: 'Stereo' 'Mono (Left)' 'Mono (Right)' 'Digital Mono' Item0: 'Stereo'

When executing a command - sudo opt upgrade - returns an error: Setting up linux-image-legacy-rk35xx (23.11.1) ... Armbian 'linux-image-legacy-rk35xx' for '5.10.160-legacy-rk35xx': 'postinst' sta rting. * dkms: running auto installation service for kernel 5.10.160-legacy-rk35xx [ OK ] update-initramfs: Generating /boot/initrd.img-5.10.160-legacy-rk35xx W: Possible missing firmware /lib/firmware/rtl_nic/rtl8125a-3.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-1.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168fp-3.fw for module r81 69 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-1.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r816 9 gzip: stdout: No space left on device E: mkinitramfs failure gzip 1 update-initramfs: failed for /boot/initrd.img-5.10.160-legacy-rk35xx with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Free space after deleting the package linux-image-legacy-rk35xx in /boot: 3.6M dpkg: error processing package linux-image-legacy-rk35xx (--configure): installed linux-image-legacy-rk35xx package post-installation script subprocess returned error exit status 1 Errors were encountered while processing: linux-image-legacy-rk35xx E: Sub-process /usr/bin/dpkg returned an error code (1) what could be the problem and how to fix it?

Hello. The official adapter does not work for my orange pi 5 plus. https://aliexpress.ru/item/1005005956334270.html?spm=a2g2w.orderdetail.0.0.4e224aa6r3APff&sku_id=12000035019805399 The problem is this. Wi-Fi works, you turn on bluetooth, bluetooth doesn’t work initially. After turning on bluetooth, Wi-Fi does not work and bluetooth does not work either. Realtek RTL8852BE-CG BE CPU work in all officials builds. Help me please

Hi all, Testing some versions of the Armbian img for the latest Orange Pi 5 Plus, right now im using Armbian_23.8.2_Orangepi5-plus_jammy_legacy_5.10.160_gnome_desktop.img and noticed when Im RDP in from windows machine, the audio from the OPI it doesn't get played back through. I did noticed when re-login locally back on the same user account, the audio card shows "Dummy Output" and no audio from the 3.5mm port. Is there a fix for this ? even on another version ? I have tested a few and all appears same result. bookworm_legacy_5.10.160_cinnamon bookworm_legacy_5.10.160_gnome bookworm_legacy_5.10.160_xfce Regards,

New OPI5+, unable to finish install because ethernet doesn't work. I haven't been able to figure it out and my searches turned up nothing. journalctl has the following messages: - hpptx phy lane locked! - rk_gmac-dwmac fe1c0000.ethernet error: no phy at addr -1 - stmmac_open: cannot attach to phy (error -19) I've checked power supply, cables, edited the interfaces file, and more , with no success. I have an Orange Pi 5 that I can swap as is in its place and everything works. Coupled with the fact that I couldn't find mention of the errors, I'm hoping that someone can help me before I give up and return the OPI5+.

Armbian trixie 24.2.0-trunk.272 - kernel 6.7.0-rc7 Connecting over ssh. When I shutdown the pi (sudo poweroff) it disconnects the ssh session but does not shut down completely. Network and heartbeat leds still flashing. Works fine with the legacy kernel 5.10 What am I missing? thanks

Hi, I've had my 5+ for a week now and tinker with it when I can. Some things I've noticed... Using Amrbian legacy 5.10 legacy.... the system draws about 2.2w idle using a USB meter and no peripherals attached. When using the trying the latest 24.2.0-trunk.79, the power draw increases to 3w idle. I also noted the LED flickers between green and red rather than blue and red with legacy. My guess is more peripherals are being enabled. When using legacy, the first time i run an apt-get update there are 39 'gets'. When I then added a launchpad ppa and run again I only get 6. Not sure why that is. I cannot get my EMMC to boot, i've tried numerous methods from here and orangepi website using the windows tools. No errors, just a constant blue led light when SD card is removed. I've pasted my current system output to the link below if anyone can have a look at it. https://paste.armbian.com/cehirewota I used this command to wipe my EMMC after trying to make it primary / bootable blkdiscard /dev/mmcblk0 -f However there are 2 disks that I don't know how to clear. NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mtdblock0 31:0 0 16M 0 disk mmcblk0 179:0 0 28.9G 0 disk mmcblk0boot0 179:32 0 4M 1 disk mmcblk0boot1 179:64 0 4M 1 disk mmcblk1 179:96 0 119.1G 0 disk ├─mmcblk1p1 179:97 0 256M 0 part /boot └─mmcblk1p2 179:98 0 117.6G 0 part /var/log.hdd / zram0 254:0 0 1.8G 0 disk [SWAP] zram1 254:1 0 50M 0 disk /var/log

Hi, I'm pretty new to this forum may be I will ask some already answered questions, but here they are: I just had a new orangepi 5 plus card and I failed to use the "buses": - I2s: didn't find anywhere how to activate it (i'm trying a dac as a soundcard). Didn't find the hifiberry-dac overlay neither (ok maybe this one is just for raspberry). - spi: I plugged a simple mcp3008 to the spi pins but can't read anything on it (i have the /dev/spidev0.0/1 and /dev/spiddev4.0/1 devices). I think I respected the rights pins. - i2c: when I activate the overlays in armbianEnv.txt, I can see a lot of messages every seconds with dmesg about rk-hdmi. Maybe I put too much overlays in the list ? Any help or leads would be appreciated.

sudo add-apt-repository ppa:liujianfeng1994/rockchip-multimedia [sudo] contraseña para eduardo: Repository: 'deb https://ppa.launchpadcontent.net/liujianfeng1994/rockchip-multimedia/ubuntu/ bookworm main' Description: This ppa provides a package rockchip-multimedia-config to config your system ready for multimedia acceleration. sudo apt install rockchip-multimedia-config Then you're good to go. More info: https://launchpad.net/~liujianfeng1994/+archive/ubuntu/rockchip-multimedia Adding repository. Press [ENTER] to continue or Ctrl-c to cancel. Adding deb entry to /etc/apt/sources.list.d/liujianfeng1994-ubuntu-rockchip-multimedia-bookworm.list Adding disabled deb-src entry to /etc/apt/sources.list.d/liujianfeng1994-ubuntu-rockchip-multimedia-bookworm.list Adding key to /etc/apt/trusted.gpg.d/liujianfeng1994-ubuntu-rockchip-multimedia.gpg with fingerprint 0B2F0747E3BD546820A639B68065BE1FC67AABDE Obj:1 http://deb.debian.org/debian bookworm InRelease Des:3 http://deb.debian.org/debian bookworm-updates InRelease [52.1 kB] Des:5 http://security.debian.org bookworm-security InRelease [48.0 kB] Des:6 http://deb.debian.org/debian bookworm-backports InRelease [56.5 kB] Obj:2 https://cli.github.com/packages stable InRelease Ign:8 https://ppa.launchpadcontent.net/liujianfeng1994/panfork-mesa/ubuntu bookworm InRelease Obj:7 http://armbian.chi.auroradev.org/apt bookworm InRelease Des:4 https://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium InRelease [3 843 B] Des:9 http://deb.debian.org/debian bookworm-backports/main arm64 Packages.diff/Index [63.3 kB] Ign:10 https://ppa.launchpadcontent.net/liujianfeng1994/rockchip-multimedia/ubuntu bookworm InRelease Des:11 http://deb.debian.org/debian bookworm-backports/main arm64 Contents (deb).diff/Index [48.8 kB] Des:12 http://deb.debian.org/debian bookworm-backports/main all Contents (deb).diff/Index [63.6 kB] Err:13 https://ppa.launchpadcontent.net/liujianfeng1994/panfork-mesa/ubuntu bookworm Release 404 Not Found [IP: 185.125.190.52 443] Des:14 http://security.debian.org bookworm-security/main arm64 Packages [92.9 kB] Des:15 http://deb.debian.org/debian bookworm-backports/main arm64 Packages T-2023-11-02-0803.41-F-2023-11-02-0203.47.pdiff [16.4 kB] Des:15 http://deb.debian.org/debian bookworm-backports/main arm64 Packages T-2023-11-02-0803.41-F-2023-11-02-0203.47.pdiff [16.4 kB] Err:16 https://ppa.launchpadcontent.net/liujianfeng1994/rockchip-multimedia/ubuntu bookworm Release 404 Not Found [IP: 185.125.190.52 443] Des:17 https://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium/main arm64 Packages [1 039 B] Des:18 http://deb.debian.org/debian bookworm-backports/main arm64 Contents (deb) T-2023-11-02-0803.41-F-2023-11-02-0803.41.pdiff [85.2 kB] Des:18 http://deb.debian.org/debian bookworm-backports/main arm64 Contents (deb) T-2023-11-02-0803.41-F-2023-11-02-0803.41.pdiff [85.2 kB] Des:19 http://deb.debian.org/debian bookworm-backports/main all Contents (deb) T-2023-11-02-0203.47-F-2023-11-02-0203.47.pdiff [27.2 kB] Des:19 http://deb.debian.org/debian bookworm-backports/main all Contents (deb) T-2023-11-02-0203.47-F-2023-11-02-0203.47.pdiff [27.2 kB] Leyendo lista de paquetes... Hecho E: El repositorio «https://ppa.launchpadcontent.net/liujianfeng1994/panfork-mesa/ubuntu bookworm Release» no tiene un fichero de Publicación. N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión. N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios. E: El repositorio «https://ppa.launchpadcontent.net/liujianfeng1994/rockchip-multimedia/ubuntu bookworm Release» no tiene un fichero de Publicación. N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión. N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios. eduardo@orangepi5-plus:~$

I've noticed a funny thing on 23.11.0-trunk.244, trixie edge. If I use netplan to change the names of the network interfaces, they disappear on the next reboot - linux no longer detects them at all. dmesg will show: ``` rockchip-dw-pcie a40c00000.pcie: Phy link never came up rockchip-dw-pcie a41000000.pcie: Phy link never came up ``` The interfaces will disappear from lspci. Any hint on what's causing this?

I would like to create a LAN teaming on my Orange pi 5 plus. So combine both interfaces. The whole thing should run as load balancing so that the load is distributed evenly. How exactly do I set this up and can there be problems with something like this with Docker?

Hi everyone! I have recently bought an Orange Pi 5 Plus (16 GB RAM) and installed Armbian (the Pi Plus version). Then I enabled GPU hardware acceleration, as suggested on the Armbian download page, which then updated chromium and other things to the rkmpp versions. Now, if I start chromium under Wayland (tried Sway, Gnome, and KDE), the hardware acceleration works nicely, so I get good FPS on e.g. WebGL aquarium, and similar things. However, the antialiasing of some items on the screen does not seem to be working. Antialiasing in WebGL seems off as well. You can see an example in the attached screenshot. Here's what I have tried so far: Before installing GPU acceleration packages from PPAs: antialiasing is good, video + WebGL very slow After installing, antialiasing is not working for some items, but video and WebGL performance is good. Terminal output from chromium: orangepi5-plus:~:% chromium-browser [6045:6045:1014/205303.066564:ERROR:gl_display.cc(520)] EGL Driver message (Error) eglQueryDeviceAttribEXT: eglQueryDeviceAttribEXT [6045:6045:1014/205303.066882:ERROR:gl_angle_util_vulkan.cc(189)] Failed to retrieve vkGetInstanceProcAddr [6045:6045:1014/205303.067071:ERROR:vulkan_instance.cc(91)] Failed to get vkGetInstanceProcAddr pointer from ANGLE. [6001:6001:1014/205306.049251:ERROR:chrome_browser_cloud_management_controller.cc(162)] Cloud management controller initialization aborted as CBCM is not enabled. Failed to query video capabilities: Inappropriate ioctl for device libv4l2: error getting capabilities: Inappropriate ioctl for device Failed to query video capabilities: Inappropriate ioctl for device libv4l2: error getting capabilities: Inappropriate ioctl for device [6045:6045:1014/205314.614093:ERROR:gl_surface_presentation_helper.cc(260)] GetVSyncParametersIfAvailable() failed for 1 times! [6045:6045:1014/205332.225266:ERROR:gl_surface_presentation_helper.cc(260)] GetVSyncParametersIfAvailable() failed for 2 times! [6045:6045:1014/205332.914513:ERROR:gl_surface_presentation_helper.cc(260)] GetVSyncParametersIfAvailable() failed for 3 times! When running Chromium with malirun (I understand that this makes it use blob drivers for Mali), the antialiasing is working again, but attempting to open chrome://gpu leads to a temporary freeze and the following console output. In addition, the keyboard and general interaction with the browser seems laggy, despite good WebGL performance: orangepi5-plus:~:% malirun chromium-browser [3461:3461:1014/211639.485891:ERROR:chrome_browser_cloud_management_controller.cc(162)] Cloud management controller initialization aborted as CBCM is not enabled. arm_release_ver: g13p0-01eac0, rk_so_ver: 3 [3507:3507:1014/211639.630264:ERROR:gl_angle_util_vulkan.cc(22)] EGL_EXT_device_query not supported [3507:3507:1014/211639.630525:ERROR:vulkan_instance.cc(91)] Failed to get vkGetInstanceProcAddr pointer from ANGLE. Failed to query video capabilities: Inappropriate ioctl for device libv4l2: error getting capabilities: Inappropriate ioctl for device Failed to query video capabilities: Inappropriate ioctl for device libv4l2: error getting capabilities: Inappropriate ioctl for device [3461:3492:1014/211640.511695:ERROR:object_proxy.cc(590)] Failed to call method: org.freedesktop.DBus.StartServiceByName: object_path= /org/freedesktop/DBus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Warning: vkCreateInstance: Found no drivers! Error: vkCreateInstance failed with VK_ERROR_INCOMPATIBLE_DRIVER at CheckVkSuccessImpl (../../third_party/dawn/src/dawn/native/vulkan/VulkanError.cpp:88) at CreateVkInstance (../../third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:416) at Initialize (../../third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:302) at Create (../../third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:232) at operator() (../../third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:492) LIBGL: Initialising gl4es LIBGL: v1.1.5 built on Apr 18 2023 02:39:01 LIBGL: Using GLES 2.0 backend LIBGL: loaded: libGLESv2.so LIBGL: loaded: libEGL.so LIBGL: Using GLES 2.0 backend [1014/211839.760567:WARNING:exception_snapshot_linux.cc(263)] fpsimd not found [3461:3461:1014/211839.874801:ERROR:gpu_process_host.cc(953)] GPU process exited unexpectedly: exit_code=512 arm_release_ver: g13p0-01eac0, rk_so_ver: 3 Since I would like to use the OPi5 Plus for some browsing and related things, is there something that I can do to make antialiasing work? Thanks a lot in advance!

Hello. I'm sure this has been discussed a lot but I couldn't find anything recent. I just got my Orange Pi 5 Plus and I installed Armbian 23.8 Bookworm CLI on it. It is really fast and I love it so far. I see that it is unclear whether we have some kind of working vulkan drivers or not but I just installed the mesa-vulkan-drivers package and the vulkaninfo command is actually returning output so does that mean that we have vulkan drivers that work for the G610? Thanks in advance

I've been looking into streaming on the Orange Pi's, which doesn't work, so I thought I would share my findings. I was first told by customer service people that the problem was HDCP, but have found that it is actually the camera. The tech was kind enough to slip that the camera module doesn't have their hooks. I can still view in the browser, and this leaves me to the conclusion that TV boxes and Smart TVs are using the camera modules to record end users without their permission. If the system has the camera hooks, the app is allowed to play. The browser bypasses this, because it has permissions to access private information on our devices, and they dig the system while we watch a show. Reminds me of multi-link. There must be some kind of stub or JNI for the hooks, right? We should be able to patch something in, provided that we knew what their code is calling. Anyone have input or ideas on this?

Every time I stop and then start Chromium, do a search on google, or on youtube, there seems to be a deletion of the cookies, and it asks consent again, login again .... I found lots of possible solutions on internet about that issue, but none work for me! I wonder what this is due to, any ideas?

I am trying to compile a new kernel in order to support some satellite receiver tuner (from TBS). I did that successfully (In February 2023) on Orange Pi 5 with Linux kernel 5.10.110, but I am struggling doing it with Orange PI 5 Plus with Linux 5.10.160 (jammy). Basically I would like to turn as Modules lots of CONFIG_VIDEOBUF2_*, in order to replace the modules with the ones compiled separately (that I know are working fine with my TBS USD card). These are my issues: - I do not manage to set separately those CONFIG_VIDEOBUF2_* through the menu config. - Thus I tried to set the whole "multimedia support" as a module and got the error: -------------------------------------------------- [🔨] /usr/bin/aarch64-linux-gnu-ld: drivers/phy/rockchip/phy-rockchip-samsung-dcphy.o: in function `samsung_mipi_dcphy_power_on': [🔨] phy-rockchip-samsung-dcphy.c:(.text+0xe1c): undefined reference to `v4l2_subdev_call_wrappers' [🔨] /usr/bin/aarch64-linux-gnu-ld: drivers/phy/rockchip/phy-rockchip-samsung-dcphy.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `v4l2_subdev_call_wrappers' which may bind externally can not be used when making a shared object; recompile with -fPIC [🔨] phy-rockchip-samsung-dcphy.c:(.text+0xe1c): dangerous relocation: unsupported relocation [🔨] /usr/bin/aarch64-linux-gnu-ld: phy-rockchip-samsung-dcphy.c:(.text+0xe2c): undefined reference to `v4l2_subdev_call_wrappers' [🔨] /usr/bin/aarch64-linux-gnu-ld: phy-rockchip-samsung-dcphy.c:(.text+0xe74): undefined reference to `v4l2_subdev_call_wrappers' [🔨] /usr/bin/aarch64-linux-gnu-ld: drivers/phy/rockchip/phy-rockchip-samsung-dcphy.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `v4l2_subdev_call_wrappers' which may bind externally can not be used when making a shared object; recompile with -fPIC [🔨] phy-rockchip-samsung-dcphy.c:(.text+0xe74): dangerous relocation: unsupported relocation [🔨] /usr/bin/aarch64-linux-gnu-ld: phy-rockchip-samsung-dcphy.c:(.text+0xe84): undefined reference to `v4l2_subdev_call_wrappers' ------------------------------------------------------- Any idea on how to unblock that? I am compiling on native on the PI 5 Plus. Thanks.

Hi, newbie here again.... I recently switched to Armbian from Orange Pi Ubuntu. I am running Armbian 23.8.1 Jammy with Linux 5.10.160-legacy-rk35xx My issue is a noticeable slowdown in NVME performance. I now get 522.35 MB/sec (as per hdparm test), but before on orange pi ubuntu it was around 1900 MB/s . FYI...Armbian is installed on and booting from the NVME. everything else seems to work perfect and I don't get smartctl errors. Please advise - Crucial P3 4TB PCIe M.2 2280 SSD NVMe (PCIe Gen 3 x4) - Have all the latest updates /dev/nvme0n1: Timing cached reads: 7988 MB in 2.00 seconds = 3997.60 MB/sec Timing buffered disk reads: 1568 MB in 3.00 seconds = 522.35 MB/sec Thank you in advance for any help you can offer.

Armbian 23.08.0-trunk Bookworm with Linux 5.10.160-rk35xx root@orangepi5-plus:~# gpio -v gpio version: 2.46 Copyright (c) 2012-2018 Gordon Henderson This is free software with ABSOLUTELY NO WARRANTY. For details type: gpio -warranty * Device tree is enabled. *--> Orange Pi 5 Plus root@orangepi5-plus:~# gpio readall wiringPiSetup: mmap (GPIO) failed: Operation not permitted

I am new to ARM based systems. I purchased a OPI5 plus. I also have an Aprotti 10 in USB/HDMI touchscreen and I am also trying to use a USB dongle for audio. I installed Armbian on an nvme. Display works fine, but aside from my keyboard and mouse nothing I plug into the USB 3.0 or USB-C ports are detected nor do they work. Powering my system is a Makerfocus UPS for RPIs conneccte to a 10000mah battery. The board is connected to the OPI5 plus and the second power port is connected to my touchscreen display. I am at a lost to determine why none of my peripherals are working. I saw one of the moderators say to run armbianmonitor -u. I ran it and have the URL. Do I post that in here? Thanks in advance from the new guy.

Please advise (see low/high values): nvme-pci-0100 Adapter: PCI adapter Sensor 1: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +39.9°C (low = -273.1°C, high = +65261.8°C) Sensor 8: +31.9°C (low = -273.1°C, high = +65261.8°C)

I received my new orange pi 5 plus. I installed the official Orange PI 5 Plus Ubuntu on a SD card and it worked great. Then I installed the "Armbian_23.8.1_Orangepi5-plus_jammy_legacy_5.10.160_gnome_desktop" on SD card (Yes I took the image from the page with the "archive for orange Pi 5 plus"), and it get stuck on a screen displaying "Orange PI" (I do not see any armbian logo) , and nothing else happens (the blue light on the board does not blink). Why is that? How can I see what is happening? I installed in the past Armbian on an Orange Pi 5 with no issue, so I am really wondering what is going on there. Your view/ideas will be appreciated, thanks in advance,

Hi, my orange pi 5 plus cant boot armbian, its hang and screen goes flicker, im currently not been able to boot android images to (its hang and flicker to),, i cant boot armbian and android version.. but other linux is normally booting fine.. any advise?

Any guidance on getting the native 2-pin fan connector and control working with Armbian Jammy? e.g. using pwm-fan driver to control the fan. Thanks for any help, please be kind, I'm a newbie 🙂

I'm running armbian 23.08 bookworm on an orange pi 5 plus. I'm trying to run VMs that boot with UEFI, but these are hanging. I suspect a bug in the vendor kernel (5.10.160-rk35xx), since this works fine on an AWS bare metal arm64 host. Example: ``` $ sudo apt install qemu-system qemu-efi-aarch64 ... $ cp /usr/share/AAVMF/AAVMF_VARS.fd ./aavmf_efivars.fd $ qemu-system-aarch64 \ -machine virt \ -cpu max \ -drive if=pflash,unit=0,format=raw,readonly=on,file=/usr/share/AAVMF/AAVMF_CODE.fd \ -drive file=aavmf_efivars.fd,format=raw,if=pflash -net none \ -nographic \ -enable-kvm ``` This hangs for me (to exit press C-a x). If I remove `-enable-kvm`, the UEFI shell loads.

Hi Please, find below my current Armbian version in OPI5: Armbian_23.5.5_Orangepi5-plus_jammy_legacy_5.10.160_cinnamon_desktop I’m having a few issues with Orange pi 5 Plus. Wifi/Bluetooth issues: I bought this WIFI/Bluethooth model (RTL8852BE) ( Link ) Bluetooth: When I try finding a new dispositive does not find anyone. However, it’s working with Ubuntu. WIFI: I did not have any problem with SDcard but the NVME gave me wifi problems sometimes when I updated it with “apt upgrade”. Then, the wifi does not work and I have to reboot and switch off bluetooth to make the wifi work. I tried the ubuntu ( Link ) and I did not have any problem with bluetooth and neitherl WIFI. Issues initializing OPI5+ (NVME) Sometimes it’s triggers the following error when I turn on the OPI5+ from the NVME. In order to access the system again, I have to turn off and turn on the orange pi 5 plus. hardware acceleration I believe, I`m having a problem with hardware acceleration, because Youtube on Chromiun with Ubuntu ( Link ) works and now it doesn't work for me. ~:% glxinfo -B name of display: :0 display: :0 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer): Vendor: Panfrost (0xffffffff) Device: Mali-G610 (Panfrost) (0xffffffff) Version: 23.0.0 Accelerated: yes Video memory: 15718MB Unified memory: yes Preferred profile: compat (0x2) Max core profile version: 0.0 Max compat profile version: 3.0 Max GLES1 profile version: 1.1 Max GLES[23] profile version: 3.1 OpenGL vendor string: Panfrost OpenGL renderer string: Mali-G610 (Panfrost) OpenGL version string: 3.0 Mesa 23.0.0-devel OpenGL shading language version string: 1.30 OpenGL context flags: (none) OpenGL ES profile version string: OpenGL ES 3.1 Mesa 23.0.0-devel OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10 GPIO I saw a few colleages using GPIO and when they use this command “gpio readall” it triggers the following error. "wiringPiSetup: mmap (GPIO) failed: Operation not permitted" I found this solution and it worked. ( Link ) write in the console: echo "BOARD=orangepi5plus" | sudo tee /etc/orangepi-release Thank you very much and kind regards, Apologise for any silly question this is a new world for me.