Search the Community

Hi, I am using orangepi+, i have a problem. My os version is Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112_server. but, when i use reboot command, somtimes it's stopped, it's stop point is -> Starting LSB: set CPUFreq Kernel parameters... I don't know why it's stoped.. plz reply. Thanks.

Good afternoon dear experts. I have a problem on my Orange pi plus 2. My hard drive(WD Red WD10JFCX, 1Тб, HDD, SATA III, 2.5") is periodically switched-off (/dev/sda1). in ravines I have: Sep 28 10:48:37 PM dvr kernel: [1678371.474389] ehci_irq: highspeed device disconnect Sep 28 10:48:37 PM dvr kernel: [1678371.474593] usb 3-1: USB disconnect, device number 2 Sep 28 10:48:37 PM dvr kernel: [1678371.479539] Buffer I/O error on device sda1, logical block 76682192 Sep 28 10:48:37 PM dvr kernel: [1678371.479581] Buffer I/O error on device sda1, logical block 76682193 Sep 28 10:48:37 PM dvr kernel: [1678371.479609] Buffer I/O error on device sda1, logical block 76682194 Sep 28 10:48:37 PM dvr kernel: [1678371.479636] Buffer I/O error on device sda1, logical block 76682195 Sep 28 10:48:37 PM dvr kernel: [1678371.479663] Buffer I/O error on device sda1, logical block 76682196 Sep 28 10:48:37 PM dvr kernel: [1678371.479690] Buffer I/O error on device sda1, logical block 76682197 Sep 28 10:48:37 PM dvr kernel: [1678371.479716] Buffer I/O error on device sda1, logical block 76682198 and Sep 28 22:48:37 dvr kernel: [1678371.474593] usb 3-1: USB disconnect, device number 2 Sep 28 22:48:37 dvr kernel: [1678371.480406] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368747 (offset 1900544 size 126976 starting block 76682478) Sep 28 22:48:37 dvr kernel: [1678371.481086] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368747 (offset 2023424 size 73728 starting block 76682496) Sep 28 22:48:37 dvr kernel: [1678371.482205] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368747 (offset 2097152 size 126976 starting block 76683038) Sep 28 22:48:37 dvr kernel: [1678371.483168] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368747 (offset 2220032 size 126976 starting block 76683068) Sep 28 22:48:37 dvr kernel: [1678371.484271] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368747 (offset 2342912 size 126976 starting block 76683098) Sep 28 22:48:37 dvr kernel: [1678371.485228] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368747 (offset 2465792 size 126976 starting block 76683128) Sep 28 22:48:37 dvr kernel: [1678371.485968] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368747 (offset 2588672 size 126976 starting block 76683158) Sep 28 22:48:37 dvr kernel: [1678371.485968] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368747 (offset 2711552 size 126976 starting block 76683188) Sep 28 22:48:37 dvr kernel: [1678371.485968] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368747 (offset 2834432 size 126976 starting block 76683218) Sep 28 22:48:37 dvr kernel: [1678371.485968] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368747 (offset 2957312 size 61440 starting block 76683233) Sep 28 22:48:37 dvr kernel: [1678371.492144] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368748 (offset 860160 size 110592 starting block 76681453) Sep 28 22:48:37 dvr kernel: [1678371.493059] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368748 (offset 737280 size 126976 starting block 76681426) Sep 28 22:48:37 dvr kernel: [1678371.493944] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368748 (offset 614400 size 126976 starting block 76681396) Sep 28 22:48:37 dvr kernel: [1678371.494826] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368748 (offset 491520 size 126976 starting block 76681366) Sep 28 22:48:37 dvr kernel: [1678371.495733] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368748 (offset 368640 size 126976 starting block 76681336) Sep 28 22:48:37 dvr kernel: [1678371.496700] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368748 (offset 245760 size 126976 starting block 76681306) Sep 28 22:48:37 dvr kernel: [1678371.497596] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368748 (offset 122880 size 126976 starting block 76681276) Sep 28 22:48:37 dvr kernel: [1678371.498622] EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 55368748 (offset 0 size 126976 starting block 76681246) Sep 28 22:48:37 dvr kernel: [1678371.499036] JBD2: Detected IO errors while flushing file data on sda1-8 Sep 28 22:48:40 dvr kernel: [1678373.960205] usb 3-1: new high-speed USB device number 3 using sunxi-ehci Sep 28 22:48:40 dvr kernel: [1678374.114545] scsi1 : usb-storage 3-1:1.0 Sep 28 22:48:40 dvr mtp-probe: checking bus 3, device 3: "/sys/devices/platform/sunxi-ehci.4/usb3/3-1" Sep 28 22:48:40 dvr mtp-probe: bus: 3, device: 3 was not an MTP device Sep 28 22:48:41 dvr kernel: [1678375.112846] scsi 1:0:0:0: Direct-Access WDC WD10 JFCX-68N6GN0 0009 PQ: 0 ANSI: 0 Sep 28 22:48:41 dvr kernel: [1678375.115159] sd 1:0:0:0: [sdb] 1953525164 512-byte logical blocks: (1.00 TB/931 GiB) Sep 28 22:48:41 dvr kernel: [1678375.116283] sd 1:0:0:0: [sdb] Write Protect is off Sep 28 22:48:41 dvr kernel: [1678375.155871] sdb: sdb1 Sep 28 22:48:41 dvr kernel: [1678375.160752] sd 1:0:0:0: [sdb] Attached SCSI disk Sep 29 06:42:28 dvr rsyslogd: [origin software="rsyslogd" swVersion="8.4.2" x-pid="1415" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Sep 29 06:42:29 dvr rsyslogd: [origin software="rsyslogd" swVersion="8.4.2" x-pid="1415" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Sep 29 22:50:02 dvr kernel: [1764856.800097] EXT4-fs (sda1): error count since last fsck: 5 Sep 29 22:50:02 dvr kernel: [1764856.800132] EXT4-fs (sda1): initial error at time 1475092117: ext4_journal_start_sb:328 Sep 29 22:50:02 dvr kernel: [1764856.800164] EXT4-fs (sda1): last error at time 1475125069: ext4_find_entry:941: inode 55312385 Orange pi plus 2 works 24 hours a day, 7 days a week, on the hard drive constant record of small videos of files has to be made. Help to solve a problem please.

Hi, I'm Olivier, french engineer, and i have bought an orangepi plus card in april. I use linux (x86) since 1994 Sorry for my bad english ... I was happy to find Armbian because linux images provided by xunlong have many security problems (example / and all system directory aren't owned by root but by orangepi user). Thank for your work on Armbian. My Orangepi + has been installed with a 5.10 armbian image (Armbian_5.10_Orangepiplus_Debian_jessie_3.4.112) and run perfectly. I wanted upgrade to 5.20 and since the card doesn't boot anymore. I can boot with the native android on NAND memory but I can't boot on SDcard. When I boot on sdcard, only green led is on (not red led) and I don't have any display on my HDMI screen. I can restore my sdcard image back up with v5.10 and boot again, the card is OK for me. I followed the upgrade documentation to pass from v5.10 to v5.20 : apt-get update apt-get upgrade apt-get install -f apt-get upgrade apt-get autoremove -y and i had an error message during first apt-get upgrade : /boot/initrd.img-3.4.112-sun8i does not exist. Cannot update. I can mount the sdcard on my linux box (an archlinux) and list directories without problem : on my sdcard image backup (v5.10), in /boot I have : Any idea ? here is the all message of upgrade process :

Hi. My platform is Orange Pi Plus. I connected SATA HDD and installed Armbian. Using nand-sata-install I created the following scenario: boot from SD, system on SATA. I also installed lighttpd. Several days everything works fine and than: ...file system on the root filesystem failed … rebooting automatically due to panic= boot argument... After that the PC just reboots constantly and I can do anything. The only solution I found is to repeat the process of boot SD creation. But after that I need to install everything again. All this I already did for several times... What maybe the reason of this error? Can I exclude the SD card and use eMMC instead? Is there anything I can try in this situation? Thanks.

Hi dear. I have some question about orangepi plus. I am using orangepi+ and The latest Armbian Debian Version was installed in emmc. and i have some BLE Module. but, when i add my module to gpio pin, i can see I/O Error..but it's not always, somtimes there is no error. and when i boot orangepi-plus, it is PULL-UP state. i don't know this reason, how can change default gpio pull-up or pull-down state? or you have some idea? thanks

Hello, I have an Orange Pi+ 2 and Orange Pi+ 2e. I use Armbian, updated to 5.20 with these commands: sudo apt-get update sudo apt-get upgrade so I rebooted and can't start. What can I do? Thanks

First of all ('Boring' alert!): outstanding job with the new updates. It must be lonely at the top. Kudos! Then (just curious!): is there any particular reason known that the amount of memory is an issue for GLshim? Then secondly: I do have an orange pi + (H3, 1 GB memory, Mali400)... according to the changelog GLShim is not in... For me it does not make sense... Regards, Makama80

Hi Harness the Board Orange Pi + 2. I propose to add the configuration for it. sasha@ubuntu:~/orange/sdk/lib$ git diff master..add-orangepiplus2 diff --git a/config/boards/orangepiplus2.conf b/config/boards/orangepiplus2.conf new file mode 100644 index 0000000..5d37e8c --- /dev/null +++ b/config/boards/orangepiplus2.conf @@ -0,0 +1,11 @@ +# H3 quad core 2GB RAM WiFi eMMC +BOARD_NAME="Orange Pi+ 2" +LINUXFAMILY=sun8i +BOOTCONFIG=orangepi_plus_defconfig +MODULES="8189es #gpio_sunxi #w1-sunxi #w1-gpio #w1-therm #gc2035 #vfe_v4l2 #sunxi-cir" +MODULES_NEXT="8189es" +CPUMIN=480000 +CPUMAX=1296000 +CLI_TARGET="jessie:default" +DESKTOP_TARGET="jessie:default" +KERNEL_TARGET="default,dev" diff --git a/scripts/armbianmonitor/armbianmonitor-daemon b/scripts/armbianmonitor/armbianmonitor-daemon index 0dfaa6b..813bafa 100644 --- a/scripts/armbianmonitor/armbianmonitor-daemon +++ b/scripts/armbianmonitor/armbianmonitor-daemon @@ -100,7 +100,7 @@ Main() { DealWithNewBoard # DealWithiMX6 ;; - "Orange Pi PC"|"Orange Pi Plus"|"Orange Pi 2"|"Orange Pi One"|"Orange Pi Lite") + "Orange Pi PC"|"Orange Pi+"|"Orange Pi+ 2"|"Orange Pi 2"|"Orange Pi One"|"Orange Pi Lite") DealWithNewBoard # DealWithH3 ;;

Hi everybody, I have an OPI+ and gc2035 camera module, i try camera with "motion" according to this tutorial and getting one picture on localhost:8081, after this page display "problem loading page". however, This is not the main issue. i try to get picture with gstreamer and i see following errors: libv4l2: error setting pixformat: operation not permitted ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src: Device '/dev/video0' cannot capture at 1600x1200 Call to S_FMT failed for YU12 @ 1600x1200: Operation not permitted. My gstreamer pipeline is: gst-launch v4l2src always-copy=false ! 'video/x-raw-yuv, format=(fourcc)I420, width=1600, height=1200' ! ffmpegcolorspace ! ximagesink I try other resolution but get the same error. vlc player display correct stream with following command: cvlc v4l2:///dev/video0 if problem is v4l2 so why vlc display camera stream? #uname -a Linux orangepiplus 3.4.112-sun8i #14 SMP PREEMPT Tue Jul 5 16:28:14 CEST 2016 armv7l GNU/Linux thanks in advance best regards

I've installed Armbian_5.14_Orangepiplus_Debian_jessie_3.4.112_desktop on a ORANGE PI PLUS 2 H3 QUAD CORE 1,6Gz / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) _ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | |_| |_ | |_| | | | (_| | | | | (_| | __/ | __/| |_ _| \___/|_| \__,_|_| |_|\__, |\___| |_| |_| |_| |___/ Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-sun8i System load: 0.52 Up time: 1 min Memory usage: 14 % of 2013Mb CPU temp: 59°C Usage of /: 19% of 15G then installed lightdm and running the xfce4 desktop with HDMI monitor of 1920x1080 I can't set resolution more than 1280, but the big problem is that video isn't fluid, i.e. if you move mouse, you can't see the arrow moving, and if you open firefox get the same behaviour, it's like a set of snapshot, not a fluid motion. Can this be fixed or am I the only one that is experiencing this? Would you suggest this setup for a web kiosk or are there better options? Thansk, BR

The program nand-sata-installer doesn't work to put the image on the onboard storage with all 4.X kernels (orange pi plus wifi/nand). When i use the older kernel it works fine without any issue. Also when i compile this image by myself it doesn't work either Is there a way to put the SD image to the local storage and how can i do this with this 4.x kernel?

First off, I'd like to thank the maintainers for all the work you've put into Armbian. It's really been a pleasure to use. I'm currently using an OrangePI 2+as a kiosk computer, and I'm wondering if there might be some other way to wake it from sleep other than pressing the power button. Would it be possible for it to wake from sleep if one of the GPIO pins were pulled high, for instance? TIA, -Jim

Hi, I'm new user. I want to install owncloud in my orange pi+2. Someone can help?

Is there any way to get a video player to display subtitles on an H3 board? I've tried VLC and SMPlayer, but neither are able to do so (the problem seems to be that the video output is overlayed *over* the system display rather than mixed with it on a per-pixel basis, so while the subtitles are being displayed by the player, they simply aren't visible). Is there any adjustment/update/other player I can use to fix this problem? Orange Pi Plus 2 I have armbian 5.05 installed, so not sure if there are any updates that might help?

Hello, I have on my Orange Pi 2+ and Orange Pi 2+e Armbian 5.14 and 5.16 and both have the same problem: WiFi isn't constant. The signal fluctuates from 48% to 92% or from 20% to -1%. There is no difference with or without a LAN cable. When I connect the Orange Pi with a WiFi network the signal is constant. Is there somebody, who knows how to fix this problem?

Hi all Need's help, my devoces orange pi plus 2 and distibtion os armbian server, me need hardware acceleration on plexmediaserver, i used more ways, did not help.

CPU load at 100 percent when using pleksmediaserver, I understand that it is not running hardware accelerated video? P.S in Orange pi plus 2 my equipment Orange pi plus 2 my equipment Orange pi plus 2

Hi, I bought about a year ago an orange pi plus. Just a few weeks ago, i tryed the new distro's I love to have debian on the board. And like your distro verry much. I have 2 problems: 1) If i download the file for orangepiplus, the board does nothing. No leds go on, no grafics on screen, nothing I also tryed at home compiling it myself. The result is the same nothing. My Orange Pi Plus has an H3 processor - it is one of the first OrangePi Plus boards. (Is this an error in your piplus distro - just because loborus for piplus works) 2) If i download the orangepih3 file, the board will startup. I can not run sata-nand, because i get an error - about incorrect hardware the ethernet eth0 does not respond, at boot time it waits for about 1:35 min:sec trying to bring it up. Eth0 shows up, but did not get configuration from dhcp. I can give eth0 an ip/mask/gateway but eth0 will not work (i can use an usb-eth adapter as eth1, this works) I have the same problem with loborus debian_wheezy --> no eth0 I can download lubuntu from the orangepi.org (2015-06-25) and this works, also the eth0 works. Can you help I want to try to get you orangePiPlus disto working on my Orangepi Thx

Hi, Just installed Armbian (5.14) on SD card and tried in my OrangePi plus. It doesn't start to boot - it does nothing. I can boot by initiating boot from the system console. I've upgraded to 5.16 but still doesn't boot. Also where do I get gpio? I notice /boot/boot.cmd uses gpio but it doesn't exist. Thanks

Greeting, I installed the OrangePI plus image (desktop) on my Orange PI plus2. It seems to work fine but I can't get any video output. I tested with several h3disp settings, with a HDMI to VGA adapter then with an HDMI to DVI adapter, and finally on the A/V port. I have no hdmi screen to test direct connection without adapters. Ideally I would like to use the HDMI to VGA adapter. any ideas ?

Hi, I would like to make my opi plus in AP mode (standalone). I know the img is shipped with hostapd and interface.hostapd ready but is in bridge mode. I am able to use it in bridge mode but i need it to be standalone. How can i set it to just standalone? I tried install dnsmasq and disable the br0 but i think i did something wrong and the board cant be connected. Cheers

Hi and sorry for this questions. I buy this board, and now i need an working image with wifi. thanks for an answer.

Hello, ... Guys, . did someone had problem with ETH0? I tried on many distributions, . and always ETHO (LAN port) is dead. Any suggestions?

Hello, I have done my iso with script yersterday and when I start the Orange Pi Plus 2 the yellow led appear but nothing else doing ... Why ?

I installed armbian latest release. When i shutdown system desktop closed. After 1-2 seconds, desktop opened again And after 1-2 seconds closed again. Why desktop is launched again after closed? Is it a problem? How can i fix that?