Search the Community

Showing results for tags 'solved'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


  • Announcements & first aid
    • Announcements
    • Board doesn't start
  • Community forums
    • Common issues / peer to peer technical support
    • Reviews, Tutorials, Hardware hacks
    • Help wanted
    • Feature Requests
    • TV boxes
    • General chit chat
  • Bug tracker - supported boards and images only
    • Allwinner A20
    • Allwinner H2 & H3
    • Allwinner A64, H5 and H6
    • Armada A388, A3700
    • Amlogic S905(x), S922X
    • NXP (Freescale)
    • Rockchip 3288 & 3328
    • Rockchip 3399
    • Other supported boards
  • Development
    • Development
  • TV Boxes's General Chat
  • TV Boxes's Reviews/Tutorials
  • TV Boxes's FAQ
  • TV Boxes's TV Boxes running Armbian
  • TV Boxes's Rockchip CPU Boxes
  • TV Boxes's Amlogic CPU Boxes
  • TV Boxes's Allwinner CPU Boxes
  • Android fanboys's Forums
  • Gaming on ARM's Reviews
  • Gaming on ARM's Issues
  • Kobol Forum's Helios4
  • Kobol Forum's Helios64

Find results in...

Find results that contain...

Date Created

  • Start


Last Updated

  • Start


Filter by number of...


  • Start






Website URL






  1. I have two NanoPi R1s, both with Armbian Buster. I want to use both as wireless access points, however the wifi seems to be problematic. It always works at first, but not anymore after updating, changing the config and rebooting. My hostapd config is the following: # # armbian hostapd configuration example # # nl80211 mode # ssid=[myssid, contains some numbers] interface=wlan0 hw_mode=g channel=6 [11 on the other one] #bridge=br0 driver=nl80211 logger_syslog=0 logger_syslog_level=0 wmm_enabled=1 wpa=2 preamble=1 wpa_psk=[random thing armbian-config generated] wpa_passphrase=[secret] wpa
  2. I recently updated from very old Armbian image. The update was not smooth so I had to re-image my device with the newest version. After that USB devices cannot be detected at all. I tried USB keyboard and 3D printer (is should looks like generic serial device). Keyboard works perfectly during u-boot but stops working as soon as kernel starts. lsusb doesn't show any devices: $ lsusb -t /: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12
  3. I also like to keep things in order, but forum and this project is too big for me since a long time ago. Keeping this thing organised can only be done together. I appreciate your willingness to do your share! #armbian channel is unofficial for one very banal reason It doesn't have a recording device -> I tried to fix this once - by reaching out to IRC server staff to acquire OP status which is needed to install a bot, now its years ago, but failed. Then this task simply faded off the radar. It has been more than 25 years since I was installing IRC bots
  4. Hi, After building a DEV Pine64 image successfully, I wanted to build a Dev BananaPI image to update 2 banana pis. Unfortunately I have this error (using this commit id : e7aeffb1) : Setting up nplan (0.36.3) ... Setting up networkd-dispatcher (1.7-0ubuntu3.3) ... Installing new version of config file /etc/default/networkd-dispatcher ... Setting up gnupg (2.2.4-1ubuntu1.1) ... Processing triggers for libc-bin (2.27-3ubuntu1) ... Processing triggers for initramfs-tools (0.130ubuntu3.5) ... [ o.k. ] Installing packages for [ Armbian ] Reading package lists... Buil
  5. As I am a new Moderator and I am unfamiliar with this particular board software (apparently called "Invision Community"), I went looking for some docs... Came across The first thing I noticed is that it is proprietary software. Which I think is very out of character for a F/LOSS project at least alluding to the name Debian. Which carries a number of connotations, at least in my mind... Which is a whole another discussion, however... Secondly, a quick read through that Wikipedia article quickly reveals a numbe
  6. I'm looking for udev rules or some other way to read system LEDs without sudo. I tried, but I suspect it's not 100% what I need for the Duo.
  7. In the TV boxes section, it is quite calm and there is enough of the standard option. If the user has the first message on the forum, all messages are put in the moderation queue. If there is at least one approved message, the user can write directly to existing topics. If I see that his messages are spam or violate the rules, I delete them. As far as I understand, for those who have few messages (3-5- ?)- creating a new theme is put in the moderation queue. So far, there have been no problems. I read all messages in the " my " section and can see where there are hidden ads and delete such mes
  8. Thanks for creating a new topic! I am having problems accessing it:
  9. I noticed with the latest bionic image on the Duo it does a soft shutdown when you use the built in button. The problem is I use this button for my own uses. Can this feature be disabled and relinquish control of the button? gpioinfo | grep k1 line 3: unnamed "k1" input active-low [used]
  10. Armbianmonitor for 5.4.6: From switching between 4.19.x and 5.4.x kernels I noticed that the lower cpu frequencies got missing. It should start at 120MHz like this: root@horangepione:~# uname -a Linux honeypot2 4.19.84-sunxi #19.11.3 SMP Mon Nov 18 18:39:42 CET 2019 armv7l GNU/Linux root@horangepione:~# cpufreq-info -o minimum CPU frequency - maximum CPU frequency - governor CPU 0 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 1 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 2 120000
  11. I installed Armbian_5.75_Orangepizeroplus2-h3_Debian_stretch_next_4.19.20. But it can't boot up. These image can boot up. Armbian_5.65_Orangepizeroplus2-h3_Debian_stretch_next_4.14.78 Armbian_5.69_Orangepizeroplus2-h3_Debian_stretch_next_4.19.13
  12. Hello, I am using up to date Armbian - Debian Buster with Armbian Linux 4.19.69-meson64 Linux version 4.19.69-meson64 (root@builder) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #5.95 SMP PREEMPT Mon Sep 2 01:21:39 CEST 2019. I have encountered Ethernet interface lockup on medium traffic (after 30s-120s when copying big files from external usb disk by sshfs - 240Mb/s). At high/medium Ethernet traffic the issue always occurs. It is most likely caused by some kernel update because I didn'
  13. Hi All, Just wanted to share a good story using armbian. I have used in the past 1-wire probes for temperature, and the process included decompiling, editing and recompiling dtb for my Banana Pi M1, which was not easy at all. Every firmware update deleted by changes and had to redo de recompilation. With latest kernels and armbian version, the process is now extremely easy, just edit: /boot/armbianEnv.txt Adding this lines: overlays=w1-gpio param_w1_pin=PI3 # desired pin(7th pin (GCLK) or number 4 on first column where number 1 is +3V)
  14. Hello, Just find out that my USB ports are not working. Quick dig shows that the are disabled: # lsusb # dmesg |grep usb [ 0.000000] Kernel command line: root=UUID=e8491c09-2260-4706-a9a4-1f9f96af1232 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=5b507211-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 1.308752] usbcore: registered new i
  15. Hello, I have trouble with my SD Card - it goes in Read Only mode. What I have: I have Running System from the HDD (installed by nand-sata-install command) My Cubietruck is online for now, but I'm afraid do switch it off. I try to run dd command to make a backup of RO SD card and reuse image on a new SD card, but it does not succeed: # dd if=/dev/mmcblk0 bs=10M | gzip -c > /media/dataPartition/sdcard.img.gz dd: error reading '/dev/mmcblk0': Input/output error 0+0 records in 0+0 records out 0 bytes copied, 0.00503184 s, 0.0 kB/s I read the forum regarding bac
  16. Hi, I spent several days trying to figure this out, which is a bit confusing given all the information that is available and posts and wikis saying that "Waveshare" LCDs are supposed to work, but something is still not right, hope you guys can help. What I have: ASUS Tinker Board S, flashed with Armbian_5.90_Tinkerboard_Debian_buster_default_4.4.182_desktop.img Updated to 4.19.57-rockchip via armbian-config (in order to get the fbtft* modules that were missing in 4.4). The LCD is a 3.5" original Waveshare 32a panel. I started by adding the ove
  17. Espressobin V7 1G 800MHz DDR4 RAM 1GHz cpu purchased last week. The board starts up reliably and gets to the boot prompt ok (using minicom). I downloaded and unpacked Armbian_5.91_Espressobin_Debian_buster_next_4.19.59.img. Ran shasum and got "Ok". I dd'd it to a new Samsung SD card, dd'd it back, and ran shasum again, getting "Ok". I put the card in the board and powered it up. It finds the card and tries to boot but fails, saying: Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Failed to mount ext2 filesyst
  18. Hello, I am new on the embedded system. I am using Orange Pi zero and I am having stuff with wlan configuration. I want to run the static ip for wifi on the board and reconnect after every time rebooting How I do that? I use 2 files below The eth0 works fine with this setup otherwise the wlan not active even though I used ifconfig wlan0 up but I using ifconfig wlan0 down, it got the static ip like the configuration file then I can't turn on or off using ifconfig up/down one more time Anyone help me? Thanks a lot!
  19. Hello, Recently I bought a nanopi fire 3 and installed armbian without any issue (Armbian_5.91_Nanopifire3_Debian_buster_next_4.14.133). The first thing I did was to connect the nanopi to my ADSL router in order to complete the basic configuration. Everything worked fine. Then I connected the nanopi to an Edimax gigabit ethernet switch and here is where the network problems appeared. The ethernet connection was too slow, with ping times of more than 1000ms, and an unstable behavior that made it almost impossible to connect via ssh. 64 bytes from icmp
  20. first i was able to boot my nanopi from SD card and i was able to access it through SSH. then i was trying to boot my nanopi from EMMC but it was not booting. I already installed a different OS which is specialized for Eflasher (nanopi-neo-core_eflasher_friendlycore-xenial_4.14_armhf_20190522 ) . then i followed the steps carefully: ... i_NEO_Core note : i was using commands since there is no HDMI. I typed : eflasher then i choose 1 and typed yes and waited until the OS was installed successfully and finally i powered o
  21. Sorry to be back here I run a Cubox-i. I upgraded to kernel 5.1.16 yesterday. Then I rebooted and everything was running fine. But today my server looked dead: none of my services was answering, no way to ssh to the cubox... I tryied a hard reboot with no success. Here is the log on a putty console: U-Boot SPL 2013.10-rc4-ge4bc4c3 (Dec 18 2014 - 14:55:42) Boot Device: SD1 spl: error reading image u-boot.img, err - -1 Load image from RAW... U-Boot 2013.10-rc4-ge4bc4c3 (Dec 18 2014 - 14:55:42) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Res
  22. I know Lamobo-r1 has many problems and that the support ended, but it works fine for me. Everything works fine with kernel 4.14.84-sunxi, however, when I update the kernel, the b53 switch does not work anymore. I need to update the kernel to add another wifi usb dongle that seems to work only with newer kernels ( Anybody experiencing the same problem? Any ideas for a workaround?
  23. Hi, I can't make usb otg works on orange pi pc armbian stretch. Linux orangepipc 4.19.38-sunxi #5.83 SMP Fri May 3 23:33:25 CEST 2019 armv7l GNU/Linux At boot there is the following message in dmesg: [ 2.252841] usb0-vbus: disabling I tried to enable usbhost0 with armbianconfig overlays, but it doesn't make a difference. Any suggestions ? thanks
  24. Hi! short question: Best way to create a bootable clone of sd card? I did some reading and found ">>create image on windows >> shrink image via gparted" doesn't work for me since I dont have a second computer running linux (will the linux subsystem on windows 10 help?). In the past, I used the rpi-clone on a raspberry, but reading in this forum has taught me that hotcloning an armbian sd card via script is not necessarily safe. Computers availabel to me are: 1) odroid hc2 running armbian 2) acer laptop running windows 10
  25. TRYING TO create an ad-hoc network using wireless adapter( lb-link model: wn155a) on NANOPI NEO (Linux nanopim1 3.4.113-sun8i #28 SMP PREEMPT Thu Feb 2 02:01:28 CET 2017 armv7l GNU/Linux). we used this link BUT ad-hoc WAS NOT CREATED. running iwconfig looks like: lo no wireless extensions. tunl0 no wireless extensions. ra0 Ralink STA ESSID:"11n-AP" Nickname:"MT7601STA" Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:1 Mb/s