Search the Community

Hello! I have a Zero2 board with 1GB of RAM. I compiled a Debian 12 desktop image for Zero2 using Armbian and I want to play online videos through a web browser. Unfortunately, the results have been disappointing as the performance for 1080p videos is very slow. I tried using swap, but it didn't help. I also attempted to play 1080p videos using MPV and VLC. MPV can still play the videos, but it feels sluggish, and VLC gets stuck on the screen until the playback is finished. I would like to know how to configure Zero2 on Linux to achieve video acceleration. I'm new to this, so I would appreciate some guidance. Thank you!

Hi guys, I've been running an armbian edge image i've compiled using the build tool (armbian bookworm 6.7.12), and it's been working perfectly, with good gpu support and hdmi out working. Now this is not strictly an armbian question, but i've been wondering: is there any way to overclock that chip even slightly? There doesn't seem to be a single post about that that i could find specifically for the H616? Any and all answers welcome!

Hi all, Armbian v23.11 build fails while compiling ATF, reporting weird "cannot find cr" message: https://paste.next.armbian.com/evewilodap Can you please help? Thanks in advance!

I tried to install armbianmonitor on the opi zero 2, but unfortunately this fails: orangepizero2:~$ sudo armbianmonitor -r Installing RPi-Monitor. This can take up to 5 minutes. Be patient pleaseE: Unable to locate package rpimonitor /usr/bin/armbianmonitor: line 697: /usr/share/rpimonitor/scripts/updatePackagesStatus.pl: No such file or directory /usr/bin/armbianmonitor: line 193: /etc/rpimonitor/template/raspbian.conf: No such file or directory /usr/bin/armbianmonitor: line 196: cd: /etc/rpimonitor/: No such file or directory sed: can't read /etc/rpimonitor/template/temperature.conf: No such file or directory sed: can't read /etc/rpimonitor/template/cpu.conf: No such file or directory sed: can't read /etc/rpimonitor/template/version.conf: No such file or directory Can I do something to resolve this or do I just need to have patience

Hi all, I would like to use the PWM1 in order to drive a charge pump, but I am struggling to enable PWM using the DTB on Armbian v23.11. Anyone succeeded in configuring PWMs in H616? Thanks in advance!

Hello all, I am receiving this error while building the image: Error: Partition(s) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64 on /dev/loop0 have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes. I am . This happens in the partitioning phase (lib/functions/image/partitioning.sh line 229, using branch "v23.11" commit bba856bb57823556e12fa180284c7490fdd3708d😞 run_host_command_logged partprobe "${LOOP}" Investigated a lot, tried to unmont the image, losetup -d the loop device but nothing helped. Can you please help me? Kind regards, Andrea

Hello I've tried both Bookworm and Jammy (also older version). None boot up - nothing. The red LED starts blinking after after a few seconds. Yes the SD card is good, Yes the power supply is good (both work with the official images). Yes I've tried different SD card and power supplies. Is there an image/version someone can confirm was tested and works? thank you

I have armbian installed on a 128gb sd card but it looks to be partitioned to about 2gb. How would I go about expanding the partition to include the rest of the 126gb? root@orangepizero2:~# df -h Filesystem Size Used Avail Use% Mounted on udev 422M 0 422M 0% /dev tmpfs 99M 1.9M 97M 2% /run /dev/mmcblk0p1 1.9G 1.7G 125M 94% / tmpfs 493M 0 493M 0% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 493M 0 493M 0% /tmp /dev/zram1 47M 680K 43M 2% /var/log tmpfs 99M 0 99M 0% /run/user/0

I run "armbianmonitor -u" and I got this : https://paste.armbian.com/bapohonaja My SBC is orangepi zero 2, and I tried to use it as a NAS. But sometime the system hangup because I push to much file in my usb-disk. And I G**gle about it. Somebody said because usb driver is "UAS". So I use command "lsusb -t" and bingo, my usb driver is "uas": ``` >: lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 152d:0562 JMicron Technology Corp. / JMicron USA Technology Corp. JMS567 SATA 6Gb/s bridge Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >: lsusb -t /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 480M ``` I tried "/etc/modprobe.d/disable_uas.conf" with "options usb-storage quirks=152d:0562:u" and "update-alternatives -u" and reboot but failed. I tried "/boot/armbianEnv.txt" with "usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u,0x152d:0x0562:u" and "update-alternatives -u" and reboot but failed. Still "uas" there! Is that posible to change "uas" driver to "usb-storage"?

I have been trying to get DS3231 to work with the OrangePi Zero 2 via the i2c bus. I have tried setting the following settings in /boot/armbianEnv.txt overlay_prefix=sun8i-h6 overlay=i2c0 i2c1 i2c2 However, I am not able to use i2c tools to read the DS3231. Any suggestions are welcomed. Thank you in advance!

Just tried the latest image for Orangepi Zero2, the Armbian Focal Image(Armbian_22.02.2_Orangepizero2_focal_edge_5.16.11.img Built March 7 2022) The board has startup issue, the serial output seems to load some files in wrong format: U-Boot SPL 2021.10-armbian (Feb 26 2022 - 17:45:38 +0000) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.6(debug):510155aa-dirty NOTICE: BL31: Built : 17:45:34, Feb 26 2022 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082570, model: OrangePi Zero2 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB INFO: PMIC: aldo1 voltage: 3.300V INFO: PMIC: aldo2 voltage: 3.300V INFO: PMIC: aldo3 voltage: 3.300V INFO: PMIC: bldo1 voltage: 1.800V INFO: PMIC: dcdcd voltage: 1.500V INFO: PMIC: dcdce voltage: 3.300V INFO: Changed devicetree to reserve BL31 memory. INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: cortex_a53: CPU workaround for 1530924 was applied INFO: PSCI: Suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot 2021.10-armbian (Feb 26 2022 - 17:45:38 +0000) Allwinner Technology CPU: Allwinner H616 (SUN50I) Model: OrangePi Zero2 I2C: ready DRAM: 1 GiB MMC: mmc@4020000: 0 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: phy interface7 eth0: ethernet@5020000 Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2612 bytes read in 2 ms (1.2 MiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 131 bytes read in 1 ms (127.9 KiB/s) No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! 12522800 bytes read in 518 ms (23.1 MiB/s) Failed to load '/boot/uImage' Wrong Image Format for bootm command ERROR: can't get kernel image! SCRIPT FAILED: continuing... libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk mmc@4020000.blk... Found 2 disks No EFI system partition BootOrder not defined EFI boot manager: Cannot load any image ethernet@5020000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/01-02-00-86-a3-61-86 ethernet@5020000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 ethernet@5020000 Waiting for PHY auto negotiation to complete.. I tried another image: Armbian_22.02.2_Orangepizero2_focal_legacy_4.9.255.img.xz This one works okay

I'm using the latest image Armbian_23.8.3_Orangepizero2_bookworm_current_6.1.53.img.xz and wifi isn't working. Is there something I need to do to load the module or something? sudo nmcli device show GENERAL.DEVICE: end0 GENERAL.TYPE: ethernet GENERAL.HWADDR: 02:00:9E:C4:55:73 GENERAL.MTU: 1500 GENERAL.STATE: 100 (connected) GENERAL.CONNECTION: Wired connection 1 GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/2 WIRED-PROPERTIES.CARRIER: on IP4.ADDRESS[1]: 10.11.12.140/24 IP4.GATEWAY: 10.11.12.1 IP4.ROUTE[1]: dst = 10.11.12.0/24, nh = 0.0.0.0, mt = 100 IP4.ROUTE[2]: dst = 0.0.0.0/0, nh = 10.11.12.1, mt = 100 IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000 IP4.DNS[1]: 10.11.12.1 IP4.DOMAIN[1]: lan IP4.SEARCHES[1]: lan IP6.ADDRESS[1]: fe80::573f:9a69:7cbf:6308/64 IP6.GATEWAY: -- IP6.ROUTE[1]: dst = fe80::/64, nh = ::, mt = 1024 GENERAL.DEVICE: lo GENERAL.TYPE: loopback GENERAL.HWADDR: 00:00:00:00:00:00 GENERAL.MTU: 65536 GENERAL.STATE: 100 (connected (externally)) GENERAL.CONNECTION: lo GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1 IP4.ADDRESS[1]: 127.0.0.1/8 IP4.GATEWAY: -- IP6.ADDRESS[1]: ::1/128 IP6.GATEWAY: -- I've also tried loading the edge kernel (Linux opizero2 6.4.12-edge-sunxi64 #1 SMP Wed Aug 23 15:32:56 UTC 2023 aarch64 GNU/Linux) and that's not working either.

Greetings, I'm using latest Jammy on an OPIZ2. I've installed the Mate desktop and enabled the desktop with armbian-config. I get no HDMI output. Am I missing a step? Is the Mate desktop appropriate? Thanks. The system works with the vendor's debian distro, but I'd like something better.

Hi there, I am trying to build the image using docker, but I get several "Segmentation fault (core dumped)" error messages and as result the build gets interrupted. Would like to stick to docker build (I am running of fedora 39, and it automatically selects docker), as it looks to be far more efficient rather than running it into a VM. Any idea on how could I get rid of this issue? Thanks is advance! Andrea

I can not ssh into my Orange Pi Zero 2 . I get "incorrect password , permission denied" repeatedly. I have loaded latest Armbian 23.11 and some older images all with same result. I used "1234" as password. My Pc has Linux Mint 21.2 and I used Xfce terminal also XTerm. Both My Pc and Orange Pi Zero2 are plugged into same switch. Also used a laptop with Linux Mint 21.1 and Xfce Terminal with same result. Any ideas would be great , I'm just any average user that tinkers. Thanks

There are a number of people working on getting the orangepi zero3 to work with Armbian. The zero3 is almost identical to the zero2 which is a supported board. The differences between the two have been taken into account by upstream Linux and u-boot changes in at least Linux-6.6 to the point where it is possible to build a working zero3 Armbian image. Everything else in theory should be identical between the two boards. Any changes should apply to both zero2 and 3. My question is, what capabilities are supported by Armbian on the zero2. What is working and tested? - wifi -Bluetooth -HDMI -sound -gpio -i2c, spi It would be helpful to know what works today on zero2 to avoid duplicating efforts on zero3. Any changes being developed for zero3 should also be tested on zero2.

Hi, I'm trying to compile Armbian with TOC0 support for my opi-zero2, but am having difficulty getting the configuration setting to take effect. Opening the compiled disk image in a hex editor shows me what I believe is evidence the current u-boot does not have the toc0 flag set: I started by creating a patch file in userpatches: userpatches/u-boot/v2023.10/board_orangepizero2/orangepizero2_toc0.patch diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig index f13735e91c..31f3c475e4 100644 --- a/configs/orangepi_zero2_defconfig +++ b/configs/orangepi_zero2_defconfig @@ -23,3 +23,4 @@ CONFIG_SPI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_MUSB_GADGET=y +CONFIG_SPL_IMAGE_TYPE_SUNXI_TOC0=y But this did not appear to have an effect on the built image. Next I tried copying the red power LED patch over to userpatches and modifying it: $ cp patch/u-boot/u-boot-sunxi/board_orangepizero2/orangepizero2_light_red_led_on.patch userpatches/u-boot/u-boot-sunxi/board_orangepizero2/orangepizero2_light_red_led_on.patch $ cat userpatches/u-boot/u-boot-sunxi/board_orangepizero2/orangepizero2_light_red_led_on.patch ... diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig index f13735e91c7..c88cd095205 100644 --- a/configs/orangepi_zero2_defconfig +++ b/configs/orangepi_zero2_defconfig @@ -23,3 +23,4 @@ CONFIG_SPI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_MUSB_GADGET=y +CONFIG_PWRLED="PC12" +CONFIG_SPL_IMAGE_TYPE_SUNXI_TOC0=y -- 2.34.1 But this also hasn't had any effect. I would appreciate any pointers as to what I'm misunderstanding about the build system!

Hey, I'm new to armbian/linux and want to use an Orange Pi Zero 2 as a cheap OctoPi alternative. Bare Octoprint is already working, but I don't get the MJPG-Streamer for my usb-webcam to run. The OPiZ2 is running Focal 22.05.3 (5.15.48) and is up to date. (I didn't choose Bullseye because it's on an older kernel and the psu control plugin might need 5.05+) The instruction I found said: cd ~ sudo apt install subversion libjpeg62-turbo-dev imagemagick ffmpeg libv4l-dev cmake git clone https://github.com/jacksonliam/mjpg-streamer.git cd mjpg-streamer/mjpg-streamer-experimental export LD_LIBRARY_PATH=. make but I get: "E: Unable to locate package libjpeg62-turbo-dev" What did I have to do? I have not found any instructions for armbian or the ubuntu I used. Thanks

Hi everyone. FIrst of all, i need to thank this community, you need to be congratulated for the effort you all make to this project. When i restart my router, the wlan0 of my opi zero 2 stops, no network with "nmcli dev wifi" appears. I've already tried restarting the service with "sudo systemctl restart NetworkManager", disable IPv6 and also installing latest armbian-firmware-full.deb, but it still the same. I'm only able to resolve it with a reboot. Previously I used Debian and this did not happen. I'm using this linux version (4.9.318-legacy-sun50iw9) because of compatibility with the SPI LCD TFT display that I'm using. From what I researched here on the forum, this seems to be related to drivers, but I didn't find the solution (if it exists for the version I'm using). Normally I would try another version, but I am unable to remove the SD card from the opi at the moment (the LCD is glued to the front of it), I would like to solve this just through the terminal. I will leave the armbianmonitor log below. thanks. Network/firewall problem detected. Trying fallback... Network/firewall problem detected. Not able to upload debug info. 1 2 ### Activated 1 lzo zram swap devices with 482MB each. 3 ### Activated Armbian ramlog partition with lz4 compression 4 5 Mon Sep 25 10:14:12 AM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 6 7 ### dmesg: 8 9 [ 0.000000] Booting Linux on physical CPU 0x0 10 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 11 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 12 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 13 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 14 [ 0.000000] On node 0 totalpages: 262144 15 [ 0.000000] DMA zone: 4096 pages used for memmap 16 [ 0.000000] DMA zone: 0 pages reserved 17 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 18 [ 0.000000] psci: probing for conduit method from DT. 19 [ 0.000000] psci: PSCIv1.0 detected in firmware. 20 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 21 [ 0.000000] psci: Trusted OS migration not required 22 [ 0.000000] psci: SMC Calling Convention v1.0 23 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 24 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 25 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 26 [ 0.000000] Detected VIPT I-cache on CPU0 27 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 28 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 29 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 30 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 31 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 32 [ 0.000000] log_buf_len min size: 131072 bytes 33 [ 0.000000] log_buf_len: 524288 bytes 34 [ 0.000000] early log buf free: 129352(98%) 35 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 36 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 37 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 38 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 39 [ 0.000000] Virtual kernel memory layout: 40 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 41 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 42 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 43 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 44 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 45 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 46 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 47 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 48 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 49 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 50 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 51 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 52 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 53 [ 0.000000] Preemptible hierarchical RCU implementation. 54 [ 0.000000] Build-time adjustment of leaf fanout to 64. 55 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 56 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 57 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 58 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 59 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 60 [ 0.000225] Console: colour dummy device 80x25 61 [ 0.000240] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 62 [ 0.000249] pid_max: default: 32768 minimum: 301 63 [ 0.000446] Security Framework initialized 64 [ 0.000454] AppArmor: AppArmor disabled by boot time parameter 65 [ 0.000568] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 66 [ 0.000573] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 67 [ 0.001841] sched-energy: CPU device node has no sched-energy-costs 68 [ 0.001855] Invalid sched_group_energy for CPU0 69 [ 0.001863] CPU0: update cpu_capacity 1024 70 [ 0.008981] ASID allocator initialised with 32768 entries 71 [ 0.027980] BOOTEVENT: 27.964624: ON 72 [ 0.055930] Detected VIPT I-cache on CPU1 73 [ 0.055983] Invalid sched_group_energy for CPU1 74 [ 0.055987] CPU1: update cpu_capacity 1024 75 [ 0.055990] CPU1: Booted secondary processor [410fd034] 76 [ 0.079320] Detected VIPT I-cache on CPU2 77 [ 0.079359] Invalid sched_group_energy for CPU2 78 [ 0.079363] CPU2: update cpu_capacity 1024 79 [ 0.079366] CPU2: Booted secondary processor [410fd034] 80 [ 0.102723] Detected VIPT I-cache on CPU3 81 [ 0.102756] Invalid sched_group_energy for CPU3 82 [ 0.102759] CPU3: update cpu_capacity 1024 83 [ 0.102762] CPU3: Booted secondary processor [410fd034] 84 [ 0.102849] Brought up 4 CPUs 85 [ 0.102857] SMP: Total of 4 processors activated. 86 [ 0.102865] CPU features: detected feature: 32-bit EL0 Support 87 [ 0.102871] CPU features: detected feature: Kernel page table isolation (KPTI) 88 [ 0.106635] CPU: All CPU(s) started at EL1 89 [ 0.106656] alternatives: patching kernel code 90 [ 0.106835] Invalid sched_group_energy for CPU3 91 [ 0.106844] CPU3: update max cpu_capacity 1024 92 [ 0.106850] Invalid sched_group_energy for Cluster3 93 [ 0.106855] Invalid sched_group_energy for CPU2 94 [ 0.106860] Invalid sched_group_energy for Cluster2 95 [ 0.106865] Invalid sched_group_energy for CPU1 96 [ 0.106871] Invalid sched_group_energy for Cluster1 97 [ 0.106876] Invalid sched_group_energy for CPU0 98 [ 0.106881] Invalid sched_group_energy for Cluster0 99 [ 0.108304] devtmpfs: initialized 100 [ 0.112733] CPU1: update max cpu_capacity 1024 101 [ 0.143456] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 102 [ 0.143481] futex hash table entries: 1024 (order: 5, 131072 bytes) 103 [ 0.144142] xor: measuring software checksum speed 104 [ 0.176262] 8regs : 1933.200 MB/sec 105 [ 0.209641] 8regs_prefetch: 1720.800 MB/sec 106 [ 0.243028] 32regs : 2287.200 MB/sec 107 [ 0.276415] 32regs_prefetch: 1996.800 MB/sec 108 [ 0.276421] xor: using function: 32regs (2287.200 MB/sec) 109 [ 0.276480] atomic64_test: passed 110 [ 0.276486] pinctrl core: initialized pinctrl subsystem 111 [ 0.277668] NET: Registered protocol family 16 112 [ 0.278918] dump_class_init,861, success 113 [ 0.293134] cpuidle: using governor menu 114 [ 0.294564] sunxi iommu: irq = 8 115 [ 0.294891] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 116 [ 0.294909] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 117 [ 0.296309] DMA: preallocated 256 KiB pool for atomic allocations 118 [ 0.297693] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 119 [ 0.312065] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 120 [ 0.316111] iommu: Adding device 1c0e000.ve to group 0 121 [ 0.316665] iommu: Adding device 1c00000.vp9 to group 0 122 [ 0.328265] iommu: Adding device 1000000.disp to group 0 123 [ 0.329691] iommu: Adding device 1480000.g2d to group 0 124 [ 0.332912] iommu: Adding device csi0 to group 0 125 [ 0.333397] iommu: Adding device csi1 to group 0 126 [ 0.334620] iommu: Adding device 6600800.vind:scaler@0 to group 0 127 [ 0.334913] iommu: Adding device 6600800.vind:scaler@1 to group 0 128 [ 0.335223] iommu: Adding device 6600800.vind:scaler@2 to group 0 129 [ 0.335532] iommu: Adding device 6600800.vind:scaler@3 to group 0 130 [ 0.335833] iommu: Adding device 6600800.vind:scaler@4 to group 0 131 [ 0.336129] iommu: Adding device 6600800.vind:scaler@5 to group 0 132 [ 0.337214] iommu: Adding device vinc0 to group 0 133 [ 0.337719] iommu: Adding device vinc1 to group 0 134 [ 0.339189] iommu: Adding device 1420000.deinterlace to group 0 135 [ 0.381216] HugeTLB registered 2 MB page size, pre-allocated 0 pages 136 [ 0.437337] raid6: int64x1 gen() 391 MB/s 137 [ 0.494101] raid6: int64x1 xor() 362 MB/s 138 [ 0.550863] raid6: int64x2 gen() 591 MB/s 139 [ 0.607537] raid6: int64x2 xor() 513 MB/s 140 [ 0.664318] raid6: int64x4 gen() 840 MB/s 141 [ 0.721054] raid6: int64x4 xor() 629 MB/s 142 [ 0.777759] raid6: int64x8 gen() 964 MB/s 143 [ 0.834536] raid6: int64x8 xor() 655 MB/s 144 [ 0.891292] raid6: neonx1 gen() 648 MB/s 145 [ 0.948026] raid6: neonx1 xor() 641 MB/s 146 [ 1.004736] raid6: neonx2 gen() 975 MB/s 147 [ 1.061478] raid6: neonx2 xor() 819 MB/s 148 [ 1.118260] raid6: neonx4 gen() 1287 MB/s 149 [ 1.174969] raid6: neonx4 xor() 965 MB/s 150 [ 1.231719] raid6: neonx8 gen() 1323 MB/s 151 [ 1.288451] raid6: neonx8 xor() 991 MB/s 152 [ 1.288456] raid6: using algorithm neonx8 gen() 1323 MB/s 153 [ 1.288461] raid6: .... xor() 991 MB/s, rmw enabled 154 [ 1.288467] raid6: using intx1 recovery algorithm 155 [ 1.288648] pwm module init! 156 [ 1.292943] sunxi-pm debug v3.10 157 [ 1.294038] SCSI subsystem initialized 158 [ 1.294659] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 159 [ 1.294743] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 160 [ 1.294863] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 161 [ 1.295349] spi spi0: master is unqueued, this is deprecated 162 [ 1.295659] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 163 [ 1.296234] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 164 [ 1.296315] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 165 [ 1.296427] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 166 [ 1.296879] spi spi1: master is unqueued, this is deprecated 167 [ 1.297185] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 168 [ 1.297961] usbcore: registered new interface driver usbfs 169 [ 1.298051] usbcore: registered new interface driver hub 170 [ 1.298124] usbcore: registered new device driver usb 171 [ 1.298366] sunxi_i2c_adap_init()2522 - init 172 [ 1.298955] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 173 [ 1.299050] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 174 [ 1.299057] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 175 [ 1.299073] twi3 supply twi not found, using dummy regulator 176 [ 1.299150] twi_request_gpio()451 - [i2c3] init name: twi3 177 [ 1.299897] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 178 [ 1.299975] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 179 [ 1.299983] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 180 [ 1.299996] twi5 supply twi not found, using dummy regulator 181 [ 1.300097] twi_request_gpio()451 - [i2c5] init name: twi5 182 [ 1.300584] axp20x-i2c 5-0036: AXP20x variant AXP806 found 183 [ 1.319272] random: fast init done 184 [ 1.330453] axp20x-i2c 5-0036: AXP20X driver loaded 185 [ 1.330939] media: Linux media interface: v0.10 186 [ 1.331023] Linux video capture interface: v2.00 187 [ 1.331851] Advanced Linux Sound Architecture Driver Initialized. 188 [ 1.332584] Bluetooth: Core ver 2.22 189 [ 1.332657] NET: Registered protocol family 31 190 [ 1.332663] Bluetooth: HCI device and connection manager initialized 191 [ 1.332681] Bluetooth: HCI socket layer initialized 192 [ 1.332694] Bluetooth: L2CAP socket layer initialized 193 [ 1.332733] Bluetooth: SCO socket layer initialized 194 [ 1.333495] [DISP]disp_module_init 195 [ 1.334685] [DISP] parser_disp_init_para,line:1403: 196 [ 1.334694] of_property_read fb0_width fail 197 [ 1.334707] [DISP] disp_init,line:2215: 198 [ 1.334713] smooth display screen:0 type:4 mode:10 199 [ 1.352233] [DISP]disp_module_init finish 200 [ 1.353103] clocksource: Switched to clocksource arch_sys_counter 201 [ 1.353356] VFS: Disk quotas dquot_6.6.0 202 [ 1.353442] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 203 [ 1.354182] Console: switching to colour frame buffer device 240x67 204 [ 1.397407] NET: Registered protocol family 2 205 [ 1.397529] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 206 [ 1.416697] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 207 [ 1.416772] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 208 [ 1.416896] TCP: Hash tables configured (established 8192 bind 8192) 209 [ 1.416987] UDP hash table entries: 512 (order: 2, 16384 bytes) 210 [ 1.417016] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 211 [ 1.417337] NET: Registered protocol family 1 212 [ 1.417940] RPC: Registered named UNIX socket transport module. 213 [ 1.417945] RPC: Registered udp transport module. 214 [ 1.417948] RPC: Registered tcp transport module. 215 [ 1.417951] RPC: Registered tcp NFSv4.1 backchannel transport module. 216 [ 1.418220] Trying to unpack rootfs image as initramfs... 217 [ 2.172617] Freeing initrd memory: 17256K 218 [ 2.173741] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 219 [ 2.177671] audit: initializing netlink subsys (disabled) 220 [ 2.177758] audit: type=2000 audit(2.173:1): initialized 221 [ 2.178699] workingset: timestamp_bits=45 max_order=18 bucket_order=0 222 [ 2.189823] DLM installed 223 [ 2.191628] squashfs: version 4.0 (2009/01/31) Phillip Lougher 224 [ 2.191964] Registering sdcardfs 0.1 225 [ 2.192434] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 226 [ 2.194120] ntfs: driver 2.1.32 [Flags: R/W]. 227 [ 2.200780] NET: Registered protocol family 38 228 [ 2.201137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 229 [ 2.201276] io scheduler noop registered 230 [ 2.201285] io scheduler deadline registered 231 [ 2.201454] io scheduler cfq registered (default) 232 [ 2.203658] failed to get easy_light_used assign 233 [ 2.203667] failed to get normal led pin assign 234 [ 2.203673] failed to get standby led pin assign 235 [ 2.203678] failed to get standby led pin assign 236 [ 2.203683] these is zero number for gpio 237 [ 2.203688] gpio_init finish with uesd 238 [ 2.206901] uart uart0: get regulator failed 239 [ 2.207102] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 240 [ 2.207125] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 241 [ 2.207219] console [ttyS0] enabled 242 [ 2.208029] uart uart1: get regulator failed 243 [ 2.208216] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 244 [ 2.208918] uart uart5: get regulator failed 245 [ 2.209103] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 246 [ 2.210433] misc dump reg init 247 [ 2.211574] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 248 [ 2.211910] Unable to detect cache hierarchy for CPU 0 249 [ 2.225936] brd: module loaded 250 [ 2.234300] loop: module loaded 251 [ 2.234492] [NAND][NE] Not found valid nand node on dts 252 [ 2.235082] Get boot type cmd line fail 253 [ 2.235668] sunxi-bt soc@03000000:bt: Missing bt_power. 254 [ 2.235679] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 255 [ 2.235686] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 256 [ 2.235693] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 257 [ 2.235748] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 258 [ 2.235825] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 259 [ 2.236724] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 260 [ 2.236736] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 261 [ 2.236743] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 262 [ 2.236751] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 263 [ 2.236758] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 264 [ 2.236790] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 265 [ 2.236824] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 266 [ 2.236832] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 267 [ 2.236850] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 268 [ 2.237822] [ADDR_MGT] addr_mgt_probe: success. 269 [ 2.244731] tun: Universal TUN/TAP device driver, 1.6 270 [ 2.244743] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 271 [ 2.246912] gmac-power0: NULL 272 [ 2.246922] gmac-power1: NULL 273 [ 2.246928] gmac-power2: NULL 274 [ 2.247873] PPP generic driver version 2.4.2 275 [ 2.248154] PPP BSD Compression module registered 276 [ 2.248165] PPP Deflate Compression module registered 277 [ 2.248191] PPP MPPE Compression module registered 278 [ 2.248199] NET: Registered protocol family 24 279 [ 2.248232] PPTP driver version 0.8.5 280 [ 2.248602] usbcore: registered new interface driver r8152 281 [ 2.248676] usbcore: registered new interface driver asix 282 [ 2.248773] usbcore: registered new interface driver ax88179_178a 283 [ 2.248840] usbcore: registered new interface driver cdc_ether 284 [ 2.248903] usbcore: registered new interface driver net1080 285 [ 2.248970] usbcore: registered new interface driver cdc_subset 286 [ 2.249034] usbcore: registered new interface driver zaurus 287 [ 2.249123] usbcore: registered new interface driver cdc_ncm 288 [ 2.249130] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 289 [ 2.249487] get drv_vbus is fail, 84 290 [ 2.249497] get ehci0-controller, regulator_io is no nocare 291 [ 2.249813] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 292 [ 2.249819] [sunxi-ehci0]: Not init ehci0 293 [ 2.249954] get ehci1-controller, regulator_io is no nocare 294 [ 2.250171] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 295 [ 2.250230] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 296 [ 2.250258] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 297 [ 2.250976] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 298 [ 2.266480] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 299 [ 2.266873] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 300 [ 2.266883] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 301 [ 2.266890] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 302 [ 2.266898] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 303 [ 2.266904] usb usb1: SerialNumber: sunxi-ehci 304 [ 2.267826] hub 1-0:1.0: USB hub found 305 [ 2.267882] hub 1-0:1.0: 1 port detected 306 [ 2.268635] get drv_vbus is fail, 84 307 [ 2.268642] get ehci2-controller, regulator_io is no nocare 308 [ 2.268884] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 309 [ 2.268936] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 310 [ 2.268962] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 311 [ 2.269313] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 312 [ 2.279797] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 313 [ 2.280032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 314 [ 2.280041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 315 [ 2.280049] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 316 [ 2.280056] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 317 [ 2.280062] usb usb2: SerialNumber: sunxi-ehci 318 [ 2.280928] hub 2-0:1.0: USB hub found 319 [ 2.280977] hub 2-0:1.0: 1 port detected 320 [ 2.281647] get drv_vbus is fail, 84 321 [ 2.281655] get ehci3-controller, regulator_io is no nocare 322 [ 2.281903] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 323 [ 2.281955] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 324 [ 2.281979] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 325 [ 2.282294] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 326 [ 2.296448] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 327 [ 2.296651] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 328 [ 2.296659] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 329 [ 2.296667] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 330 [ 2.296674] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 331 [ 2.296681] usb usb3: SerialNumber: sunxi-ehci 332 [ 2.297536] hub 3-0:1.0: USB hub found 333 [ 2.297581] hub 3-0:1.0: 1 port detected 334 [ 2.298516] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 335 [ 2.298886] get drv_vbus is fail, 84 336 [ 2.298894] get ohci0-controller, regulator_io is no nocare 337 [ 2.299227] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 338 [ 2.299232] [sunxi-ohci0]: Not init ohci0 339 [ 2.299350] get ohci1-controller, regulator_io is no nocare 340 [ 2.299509] hci: request ohci1-controller gpio:80 341 [ 2.299586] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 342 [ 2.299637] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 343 [ 2.299662] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 344 [ 2.299740] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 345 [ 2.360641] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 346 [ 2.360652] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 347 [ 2.360659] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 348 [ 2.360666] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 349 [ 2.360673] usb usb4: SerialNumber: sunxi-ohci 350 [ 2.361541] hub 4-0:1.0: USB hub found 351 [ 2.361587] hub 4-0:1.0: 1 port detected 352 [ 2.362260] get drv_vbus is fail, 84 353 [ 2.362267] get ohci2-controller, regulator_io is no nocare 354 [ 2.362601] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 355 [ 2.362650] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 356 [ 2.362676] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 357 [ 2.362753] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 358 [ 2.420614] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 359 [ 2.420625] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 360 [ 2.420632] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 361 [ 2.420640] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 362 [ 2.420646] usb usb5: SerialNumber: sunxi-ohci 363 [ 2.421525] hub 5-0:1.0: USB hub found 364 [ 2.421575] hub 5-0:1.0: 1 port detected 365 [ 2.422259] get drv_vbus is fail, 84 366 [ 2.422267] get ohci3-controller, regulator_io is no nocare 367 [ 2.422597] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 368 [ 2.422646] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 369 [ 2.422671] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 370 [ 2.422754] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 371 [ 2.480615] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 372 [ 2.480625] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 373 [ 2.480632] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 374 [ 2.480640] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 375 [ 2.480646] usb usb6: SerialNumber: sunxi-ohci 376 [ 2.481502] hub 6-0:1.0: USB hub found 377 [ 2.481548] hub 6-0:1.0: 1 port detected 378 [ 2.482475] ohci-platform: OHCI generic platform driver 379 [ 2.483238] usbcore: registered new interface driver uas 380 [ 2.483411] usbcore: registered new interface driver usb-storage 381 [ 2.483521] usbcore: registered new interface driver ums-alauda 382 [ 2.483597] usbcore: registered new interface driver ums-cypress 383 [ 2.483666] usbcore: registered new interface driver ums-datafab 384 [ 2.483735] usbcore: registered new interface driver ums_eneub6250 385 [ 2.483806] usbcore: registered new interface driver ums-freecom 386 [ 2.483879] usbcore: registered new interface driver ums-isd200 387 [ 2.483950] usbcore: registered new interface driver ums-jumpshot 388 [ 2.484023] usbcore: registered new interface driver ums-karma 389 [ 2.484101] usbcore: registered new interface driver ums-onetouch 390 [ 2.484197] usbcore: registered new interface driver ums-realtek 391 [ 2.484276] usbcore: registered new interface driver ums-sddr09 392 [ 2.484349] usbcore: registered new interface driver ums-sddr55 393 [ 2.484422] usbcore: registered new interface driver ums-usbat 394 [ 2.484569] usb_serial_number:20080411 395 [ 2.485793] input: sunxi-keyboard as /devices/virtual/input/input0 396 [ 2.486377] usbcore: registered new interface driver xpad 397 [ 2.486522] usbcore: registered new interface driver usb_acecad 398 [ 2.486622] usbcore: registered new interface driver aiptek 399 [ 2.486706] usbcore: registered new interface driver gtco 400 [ 2.486783] usbcore: registered new interface driver hanwang 401 [ 2.486864] usbcore: registered new interface driver kbtab 402 [ 2.487331] axp2101_pek: axp2101-pek can not register without irq 403 [ 2.487354] axp2101-pek: probe of axp2101-pek.0 failed with error -22 404 [ 2.488835] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 405 [ 2.488902] sunxi-rtc rtc: RTC enabled 406 [ 2.489377] i2c /dev entries driver 407 [ 2.490183] lirc_dev: IR Remote Control driver registered, major 244 408 [ 2.490195] IR NEC protocol handler initialized 409 [ 2.490202] IR RC5(x/sz) protocol handler initialized 410 [ 2.490207] IR RC6 protocol handler initialized 411 [ 2.490213] IR JVC protocol handler initialized 412 [ 2.490218] IR Sony protocol handler initialized 413 [ 2.490224] IR SANYO protocol handler initialized 414 [ 2.490230] IR Sharp protocol handler initialized 415 [ 2.490236] IR MCE Keyboard/mouse protocol handler initialized 416 [ 2.490242] IR LIRC bridge handler initialized 417 [ 2.490247] IR XMP protocol handler initialized 418 [ 2.490771] sunxi_ir_startup: get ir protocol failed 419 [ 2.490814] 7040000.s_cir supply ir0 not found, using dummy regulator 420 [ 2.491018] Registered IR keymap rc_map_sunxi 421 [ 2.491417] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 422 [ 2.491650] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 423 [ 2.492626] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 424 [ 2.493253] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 425 [ 2.493950] sunxi cedar version 0.1 426 [ 2.494148] VE: install start!!! 427 428 [ 2.494344] cedar_ve: cedar-ve the get irq is 278 429 [ 2.494969] VE: get debugfs_mpp_root is NULL, please check mpp 430 431 [ 2.494982] VE: sunxi ve debug register driver failed! 432 433 [ 2.498225] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 434 [ 2.499513] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 435 [ 2.499874] Bluetooth: HCI UART driver ver 2.3 436 [ 2.499886] Bluetooth: HCI UART protocol H4 registered 437 [ 2.499892] Bluetooth: HCI UART protocol LL registered 438 [ 2.499897] Bluetooth: HCI UART protocol Three-wire (H5) registered 439 [ 2.504082] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 440 [ 2.504098] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 441 [ 2.504111] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 442 [ 2.504123] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 443 [ 2.504135] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 444 [ 2.504147] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 445 [ 2.504554] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 446 [ 2.504670] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 447 [ 2.504870] sunxi-mmc sdc0: No vmmc regulator found 448 [ 2.504877] sunxi-mmc sdc0: No vqmmc regulator found 449 [ 2.504884] sunxi-mmc sdc0: No vdmmc regulator found 450 [ 2.504890] sunxi-mmc sdc0: No vd33sw regulator found 451 [ 2.504898] sunxi-mmc sdc0: No vd18sw regulator found 452 [ 2.504904] sunxi-mmc sdc0: No vq33sw regulator found 453 [ 2.504910] sunxi-mmc sdc0: No vq18sw regulator found 454 [ 2.505647] sunxi-mmc sdc0: set host busy 455 [ 2.505745] sunxi-mmc sdc0: Got CD GPIO 456 [ 2.506111] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 457 [ 2.506147] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 458 [ 2.519790] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 459 [ 2.536685] sunxi-mmc sdc0: detmode:gpio irq 460 [ 2.536715] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 461 [ 2.539215] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 462 [ 2.540562] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 463 [ 2.540680] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 464 [ 2.540821] sunxi-mmc sdc1: No vmmc regulator found 465 [ 2.540828] sunxi-mmc sdc1: No vqmmc regulator found 466 [ 2.540834] sunxi-mmc sdc1: No vdmmc regulator found 467 [ 2.540840] sunxi-mmc sdc1: No vd33sw regulator found 468 [ 2.540846] sunxi-mmc sdc1: No vd18sw regulator found 469 [ 2.540852] sunxi-mmc sdc1: No vq33sw regulator found 470 [ 2.540859] sunxi-mmc sdc1: No vq18sw regulator found 471 [ 2.541310] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 472 [ 2.542581] sunxi-mmc sdc1: set host busy 473 [ 2.542659] mmc:failed to get gpios 474 [ 2.543780] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 475 [ 2.545044] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 476 [ 2.559846] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 477 [ 2.568166] mmc0: host does not support reading read-only switch, assuming write-enable 478 [ 2.570079] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 479 [ 2.570163] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 480 [ 2.570517] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 481 [ 2.570613] mmc0: new high speed SDXC card at address 0001 482 [ 2.571691] mmcblk0: mmc0:0001 SD16G 59.5 GiB 483 [ 2.573317] mmcblk0: p1 484 [ 2.576495] sunxi-mmc sdc1: detmode:manually by software 485 [ 2.578689] ledtrig-cpu: registered to indicate activity on CPUs 486 [ 2.579410] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 487 [ 2.580261] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 488 [ 2.580294] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 489 [ 2.582800] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 490 [ 2.584727] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 491 [ 2.585563] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 492 [ 2.586402] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 493 [ 2.586714] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 494 [ 2.586722] sunxi_emce_probe()590emce hw init failed! 495 [ 2.586749] emce: probe of emce failed with error -2 496 [ 2.587041] hidraw: raw HID events driver (C) Jiri Kosina 497 [ 2.587291] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 498 [ 2.587328] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 499 [ 2.591817] usbcore: registered new interface driver usbhid 500 [ 2.591824] usbhid: USB HID core driver 501 [ 2.593303] optee: probing for conduit method from DT. 502 [ 2.593319] optee: api uid mismatch 503 [ 2.593917] usbcore: registered new interface driver snd-usb-audio 504 [ 2.595507] [sunxi_hdmi_codec_init] driver and deivce register finished. 505 [ 2.597254] [sunxi_internal_codec_probe]:get audio avcc failed 506 [ 2.597292] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 507 [ 2.597527] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 508 [ 2.600081] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 509 [ 2.602045] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 510 [ 2.602059] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 511 [ 2.604441] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 512 [ 2.604466] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 513 [ 2.608609] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 514 [ 2.610037] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 515 [ 2.611906] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 516 [ 2.615014] pktgen: Packet Generator for packet performance testing. Version: 2.75 517 [ 2.615450] u32 classifier 518 [ 2.615456] Actions configured 519 [ 2.615469] Netfilter messages via NETLINK v0.30. 520 [ 2.615497] nfnl_acct: registering with nfnetlink. 521 [ 2.615834] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 522 [ 2.616081] ctnetlink v0.93: registering with nfnetlink. 523 [ 2.616896] xt_time: kernel timezone is -0000 524 [ 2.616922] IPVS: Registered protocols (TCP, UDP) 525 [ 2.617030] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 526 [ 2.617156] IPVS: Creating netns size=1928 id=0 527 [ 2.617288] IPVS: ipvs loaded. 528 [ 2.617296] IPVS: [rr] scheduler registered. 529 [ 2.617394] ipip: IPv4 and MPLS over IPv4 tunneling driver 530 [ 2.618098] gre: GRE over IPv4 demultiplexor driver 531 [ 2.618107] ip_gre: GRE over IPv4 tunneling driver 532 [ 2.619384] IPv4 over IPsec tunneling driver 533 [ 2.620321] ip_tables: (C) 2000-2006 Netfilter Core Team 534 [ 2.620601] arp_tables: arp_tables: (C) 2002 David S. Miller 535 [ 2.620666] Initializing XFRM netlink socket 536 [ 2.620699] IPsec XFRM device driver 537 [ 2.621546] NET: Registered protocol family 10 538 [ 2.623459] mip6: Mobile IPv6 539 [ 2.623498] ip6_tables: (C) 2000-2006 Netfilter Core Team 540 [ 2.624821] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 541 [ 2.626490] NET: Registered protocol family 17 542 [ 2.626534] NET: Registered protocol family 15 543 [ 2.626691] Bridge firewalling registered 544 [ 2.626840] Bluetooth: RFCOMM TTY layer initialized 545 [ 2.626857] Bluetooth: RFCOMM socket layer initialized 546 [ 2.626892] Bluetooth: RFCOMM ver 1.11 547 [ 2.626906] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 548 [ 2.626911] Bluetooth: BNEP filters: protocol multicast 549 [ 2.626925] Bluetooth: BNEP socket layer initialized 550 [ 2.626930] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 551 [ 2.626942] Bluetooth: HIDP socket layer initialized 552 [ 2.627033] l2tp_core: L2TP core driver, V2.0 553 [ 2.627049] l2tp_ppp: PPPoL2TP kernel driver, V2.0 554 [ 2.627055] 8021q: 802.1Q VLAN Support v1.8 555 [ 2.627255] sctp: Hash tables configured (bind 256/256) 556 [ 2.627867] Key type dns_resolver registered 557 [ 2.628009] Registered cp15_barrier emulation handler 558 [ 2.628022] Registered setend emulation handler 559 [ 2.628972] registered taskstats version 1 560 [ 2.640511] zswap: default zpool zbud not available 561 [ 2.640519] zswap: pool creation failed 562 [ 2.643399] Btrfs loaded, crc32c=crc32c-arm64-hw 563 [ 2.644156] HDMI 2.0 driver init start! 564 [ 2.644170] boot_hdmi=true 565 [ 2.644969] Can not find the node of esm 566 [ 2.644987] ERROR: pinctrl_get for HDMI2.0 DDC fail 567 [ 2.645072] Get hdmi_power0:vcc-hdmi 568 [ 2.645111] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 569 [ 2.645293] Get hdmi_power1:vdd-hdmi 570 [ 2.645315] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 571 [ 2.646873] hdmi_cec_init 572 [ 2.647368] [DISP] disp_device_attached,line:146: 573 [ 2.647377] attached ok, mgr0<-->device0, type=4 574 [ 2.647387] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 575 [ 2.647400] [DISP] disp_hdmi_set_mode,line:648: 576 [ 2.647404] hdmi_set_mode is null! 577 [ 2.650107] HDMI2.0 module init end 578 [ 2.661230] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 579 [ 2.664683] cpu cpu1: opp_list_debug_create_link: Failed to create link 580 [ 2.664695] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 581 [ 2.664726] cpu cpu2: opp_list_debug_create_link: Failed to create link 582 [ 2.664734] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 583 [ 2.664765] cpu cpu3: opp_list_debug_create_link: Failed to create link 584 [ 2.664772] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 585 [ 2.667109] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 586 [ 2.668077] get det_vbus is fail, 84 587 [ 2.668085] get id is fail, 84 588 [ 2.668561] sunxi-rtc rtc: setting system clock to 2023-09-25 13:13:54 UTC (1695647634) 589 [ 2.672307] ALSA device list: 590 [ 2.672316] #0: audiocodec 591 [ 2.672320] #1: sndahub 592 [ 2.672323] #2: sndhdmi 593 [ 2.674011] Freeing unused kernel memory: 3008K 594 [ 2.719116] random: systemd-udevd: uninitialized urandom read (16 bytes read) 595 [ 2.721130] random: systemd-udevd: uninitialized urandom read (16 bytes read) 596 [ 2.724240] random: systemd-udevd: uninitialized urandom read (16 bytes read) 597 [ 2.782715] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 598 [ 2.943236] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 599 [ 3.053189] HDMI cable is connected 600 [ 3.293196] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 601 [ 3.513560] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 602 [ 3.513569] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 603 [ 3.513574] usb 4-1: Product: Rapoo 2.4G Wireless Device 604 [ 3.513579] usb 4-1: Manufacturer: RAPOO 605 [ 3.521487] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 606 [ 3.522059] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 607 [ 3.528252] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 608 [ 3.583846] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 609 [ 3.587814] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 610 [ 3.645175] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 611 [ 4.175658] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 612 [ 5.121341] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 613 [ 5.121897] cgroup: cgroup2: unknown option "nsdelegate" 614 [ 5.142231] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 615 [ 5.142255] systemd[1]: Detected architecture arm64. 616 [ 5.143380] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 617 [ 5.160788] systemd[1]: Hostname set to <opi>. 618 [ 5.187977] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 619 [ 6.664171] (sd-execut[1456]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 620 [ 6.826549] 621 insmod_device_driver 622 623 [ 6.826799] device_chose finished 124! 624 [ 7.152531] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 625 [ 7.390712] systemd[1]: Queued start job for default target graphical.target. 626 [ 7.398290] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 627 [ 7.400498] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 628 [ 7.402728] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 629 [ 7.404079] systemd[1]: Created slice user.slice - User and Session Slice. 630 [ 7.404752] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 631 [ 7.405299] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 632 [ 7.405628] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 633 [ 7.406181] systemd[1]: Reached target slices.target - Slice Units. 634 [ 7.406565] systemd[1]: Reached target swap.target - Swaps. 635 [ 7.406884] systemd[1]: Reached target time-set.target - System Time Set. 636 [ 7.407367] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 637 [ 7.424824] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 638 [ 7.425902] systemd[1]: Listening on syslog.socket - Syslog Socket. 639 [ 7.426952] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 640 [ 7.427666] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 641 [ 7.429270] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 642 [ 7.430281] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 643 [ 7.431365] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 644 [ 7.433565] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 645 [ 7.434470] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 646 [ 7.438424] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 647 [ 7.442972] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 648 [ 7.447838] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 649 [ 7.449095] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 650 [ 7.450145] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 651 [ 7.458224] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 652 [ 7.463640] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 653 [ 7.469588] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 654 [ 7.476065] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 655 [ 7.483720] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 656 [ 7.493753] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 657 [ 7.505609] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 658 [ 7.513699] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 659 [ 7.521780] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 660 [ 7.523557] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 661 [ 7.533427] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 662 [ 7.539615] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 663 [ 7.545233] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 664 [ 7.555354] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 665 [ 7.557708] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 666 [ 7.560723] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 667 [ 7.563680] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 668 [ 7.567220] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 669 [ 7.570740] systemd[1]: modprobe@configfs.service: Deactivated successfully. 670 [ 7.571596] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 671 [ 7.574513] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 672 [ 7.575328] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 673 [ 7.575934] fuse init (API version 7.26) 674 [ 7.578913] systemd[1]: modprobe@drm.service: Deactivated successfully. 675 [ 7.579585] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 676 [ 7.584245] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 677 [ 7.603909] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 678 [ 7.607255] systemd[1]: modprobe@fuse.service: Deactivated successfully. 679 [ 7.608402] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 680 [ 7.609083] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 681 [ 7.627682] systemd[1]: modprobe@loop.service: Deactivated successfully. 682 [ 7.632223] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 683 [ 7.643261] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 684 [ 7.644042] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 685 [ 7.644053] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 686 [ 7.644258] spidev spi1.1: Deleting spi1.1 687 [ 7.644866] fbtft_device: GPIOS used by 'fb_st7735r': 688 [ 7.644872] fbtft_device: 'reset' = GPIO73 689 [ 7.644876] fbtft_device: 'dc' = GPIO70 690 [ 7.644887] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 691 [ 7.644893] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 692 [ 7.677124] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 693 [ 7.692328] WCN: marlin_init entry! 694 [ 7.693743] WCN: marlin_parse_dt reset gpio=211 695 [ 7.693754] WCN_ERR: gpio reset request err: 211 696 [ 7.693760] WCN: wcn config bt wake host 697 [ 7.694287] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 698 [ 7.694462] WCN: wcn config wifi wake host 699 [ 7.694483] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 700 [ 7.697753] sdiohal:sdiohal_init ok 701 [ 7.698681] WCN: marlin_probe ok! 702 [ 7.707661] mtty_probe init device addr: 0xffffffc009743700 703 [ 7.707871] -->rfkill_bluetooth_init 704 [ 7.708097] <--rfkill_bluetooth_init 705 [ 7.737223] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 706 [ 7.745823] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 707 [ 7.754294] WCN: start_marlin [MARLIN_WIFI] 708 [ 7.754310] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 709 [ 7.754313] WCN: the first power on start 710 [ 7.767251] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 711 [ 7.767919] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 712 [ 7.779068] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 713 [ 7.780247] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 714 [ 7.787054] systemd[1]: Starting systemd-sysusers.service - Create System Users... 715 [ 7.803925] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 716 [ 7.806506] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 717 [ 7.808844] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 718 [ 7.857375] systemd[1]: Finished systemd-sysusers.service - Create System Users. 719 [ 7.863816] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 720 [ 7.869863] WCN: marlin chip en pull up 721 [ 7.896530] sdiohal:sdiohal_scan_card 722 [ 7.896550] sunxi-wlan soc@03000000:wlan: bus_index: 1 723 [ 7.896603] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 724 [ 7.913180] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 725 [ 7.933965] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 726 [ 7.934818] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 727 [ 7.934866] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 728 [ 7.937397] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 729 [ 7.940513] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 730 [ 7.956522] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 731 [ 7.962872] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 732 [ 7.964962] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 733 [ 7.967564] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 734 [ 7.968346] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 735 [ 7.968438] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 736 [ 7.969151] mmc1: new ultra high speed SDR104 SDIO card at address 8800 737 [ 7.969623] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 738 [ 7.969916] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 739 [ 7.969939] WCN: marlin_scan_finish! 740 [ 7.969944] sdiohal:probe ok 741 [ 7.970002] sdiohal:scan end! 742 [ 7.970010] WCN: then marlin start to download 743 [ 7.970035] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 744 [ 7.970722] systemd[1]: Mounting tmp.mount - /tmp... 745 [ 7.976973] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 746 [ 7.996649] systemd[1]: Mounted tmp.mount - /tmp. 747 [ 7.998972] systemd[1]: Reached target local-fs.target - Local File Systems. 748 [ 8.004304] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 749 [ 8.010521] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 750 [ 8.016247] systemd[1]: Starting console-setup.service - Set console font and keymap... 751 [ 8.022617] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 752 [ 8.035416] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 753 [ 8.041679] systemd[1]: Starting ufw.service - Uncomplicated firewall... 754 [ 8.044570] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 755 [ 8.079969] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 756 [ 8.089589] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 757 [ 8.094069] systemd[1]: Finished console-setup.service - Set console font and keymap. 758 [ 8.099049] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 759 [ 8.102140] systemd[1]: Received SIGRTMIN+20 from PID 1419 (plymouthd). 760 [ 8.106775] systemd[1]: Finished ufw.service - Uncomplicated firewall. 761 [ 8.109875] systemd[1]: Reached target network-pre.target - Preparation for Network. 762 [ 8.120853] WCN: combin_img 0 marlin_firmware_write finish and successful 763 [ 8.121037] WCN: marlin_start_run read reset reg val:0x1 764 [ 8.121041] WCN: after do marlin_start_run reset reg val:0x0 765 [ 8.121252] WCN: s_marlin_bootup_time=8121247426 766 [ 8.126767] WCN: clock mode: TSX 767 [ 8.126963] WCN: marlin_write_cali_data sync init_state:0x1a0f50 768 [ 8.153464] WCN: marlin_write_cali_data sync init_state:0x1a0f50 769 [ 8.180042] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 770 [ 8.180049] WCN: sdio_config bt_wake_host trigger:[high] 771 [ 8.180053] WCN: sdio_config irq:[inband] 772 [ 8.180056] WCN: sdio_config wl_wake_host trigger:[high] 773 [ 8.180060] WCN: sdio_config wake_host_level_duration_time:[20ms] 774 [ 8.180063] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 775 [ 8.180068] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 776 [ 8.180420] WCN: marlin_write_cali_data finish 777 [ 8.180599] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 778 [ 8.184298] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 779 [ 8.186570] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 780 [ 8.187145] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 781 [ 8.187683] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 782 [ 8.206808] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 783 [ 8.230273] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 784 [ 8.233417] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 785 [ 8.260159] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 786 [ 8.286681] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 787 [ 8.313421] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 788 [ 8.313431] WCN: marlin_bind_verify confuse data: 0x8badefa1b12bbe26aeffa8d1a5c07 789 [ 8.313451] WCN: marlin_bind_verify verify data: 0xccd7f963c19581907680f88f2044f687 790 [ 8.313993] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 791 [ 8.340033] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 792 [ 8.340041] sdiohal:sdiohal_runtime_get entry 793 [ 8.340206] WCN: get_cp2_version entry! 794 [ 8.342041] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 795 [ 8.342164] WCN: switch_cp2_log - close entry! 796 [ 8.343330] WCN: WCND at cmd read:OK 797 [ 8.343500] WCN: then marlin download finished and run ok 798 [ 8.343507] WCN: start_loopcheck 799 [ 8.358103] WCN: get_board_ant_num [one_ant] 800 [ 8.358115] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 801 [ 8.419895] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 802 [ 8.425761] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 803 [ 8.432774] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 804 [ 8.478091] zram: Added device: zram0 805 [ 8.479072] zram: Added device: zram1 806 [ 8.480095] zram: Added device: zram2 807 [ 8.515448] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 808 [ 8.516740] zswap: can't enable, initialization failed 809 [ 8.523294] systemd[1]: Starting networking.service - Raise network interfaces... 810 [ 8.550425] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 811 [ 8.575402] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 812 [ 8.583681] zram0: detected capacity change from 0 to 506396672 813 [ 8.643939] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 814 [ 8.684828] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 815 [ 8.687032] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 816 [ 8.688075] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 817 [ 8.690095] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 818 [ 9.171003] systemd[1]: Finished networking.service - Raise network interfaces. 819 [ 9.972783] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 820 [ 10.065081] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 821 [ 10.280879] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 822 [ 10.699203] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 823 [ 10.709665] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 824 [ 10.771758] sunxi-bt soc@03000000:bt: set block: 0 825 [ 10.791280] bluetooth_set_power: start_block=0 826 [ 10.791289] WCN: start_marlin [MARLIN_BLUETOOTH] 827 [ 10.791298] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 828 [ 10.791302] WCN: marlin have open, GNSS is closed 829 [ 10.791308] bluetooth_set_power: end_block=0 830 [ 10.801157] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 831 [ 11.015993] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 832 [ 11.035604] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 833 [ 11.035729] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 834 [ 11.036178] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 835 [ 11.052983] systemd[1]: Starting brltty.service - Braille Device Support... 836 [ 11.058965] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 837 [ 11.065165] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 838 [ 11.071992] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 839 [ 11.078964] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 840 [ 11.088671] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 841 [ 11.089344] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 842 [ 11.092894] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 843 [ 11.093819] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 844 [ 11.096164] systemd[1]: modprobe@loop.service: Deactivated successfully. 845 [ 11.096864] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 846 [ 11.098548] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 847 [ 11.098734] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 848 [ 11.150318] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 849 [ 11.150966] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 850 [ 11.151697] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 851 [ 11.624444] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 852 [ 11.768801] zram1: detected capacity change from 0 to 52428800 853 [ 11.824933] systemd[1]: Started brltty.service - Braille Device Support. 854 [ 11.844101] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 855 [ 15.812101] systemd[1]: systemd-rfkill.service: Deactivated successfully. 856 [ 15.870180] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 857 [ 15.876418] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 858 [ 15.938006] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 859 [ 19.478345] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 860 [ 19.484761] systemd[1]: Starting systemd-journald.service - Journal Service... 861 [ 19.754529] systemd-journald[1924]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.2 (1658 of 2204 items, 1269760 file size, 765 bytes per hash table item), suggesting rotation. 862 [ 19.754550] systemd-journald[1924]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 863 [ 19.761899] systemd[1]: Started systemd-journald.service - Journal Service. 864 [ 19.808239] systemd-journald[1924]: Received client request to flush runtime journal. 865 [ 20.043035] IPVS: Creating netns size=1928 id=1 866 867 ### armbian-release: 868 869 # PLEASE DO NOT EDIT THIS FILE 870 BOARD=orangepizero2 871 BOARD_NAME="Orange Pi Zero2" 872 BOARDFAMILY=sun50iw9 873 BUILD_REPOSITORY_URL=https://github.com/armbian/build 874 BUILD_REPOSITORY_COMMIT=ac829eb6 875 LINUXFAMILY=sun50iw9 876 ARCH=arm64 877 IMAGE_TYPE=stable 878 BOARD_TYPE=conf 879 INITRD_ARCH=arm 880 KERNEL_IMAGE_TYPE=Image 881 FORCE_BOOTSCRIPT_UPDATE=yes 882 VENDOR=Armbian 883 BOOTSCRIPT_FORCE_UPDATE="yes" 884 BOOTSCRIPT_DST="boot.cmd" 885 VERSION=23.8.1 886 REVISION=23.8.1 887 BRANCH=legacy 888 889 ### boot environment: 890 891 verbosity=1 892 console=serial 893 #disp_mode=1080p60 894 #fb0_width=1280 895 #fb0_height=720 896 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 897 rootfstype=ext4 898 overlays=spi-spidev 899 param_spidev_spi_bus=1 900 param_spidev_spi_cs=1 901 extraargs=fbcon=map:1 902 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 903 904 ### lsusb: 905 906 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 907 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 908 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 909 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 910 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 911 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 912 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 913 914 ### lscpu: 915 916 Architecture: aarch64 917 CPU op-mode(s): 32-bit, 64-bit 918 Byte Order: Little Endian 919 CPU(s): 4 920 On-line CPU(s) list: 0-3 921 Vendor ID: ARM 922 Model name: Cortex-A53 923 Model: 4 924 Thread(s) per core: 1 925 Core(s) per cluster: 4 926 Socket(s): - 927 Cluster(s): 1 928 Stepping: r0p4 929 CPU(s) scaling MHz: 100% 930 CPU max MHz: 1512.0000 931 CPU min MHz: 480.0000 932 BogoMIPS: 48.00 933 Flags: fp asimd aes pmull sha1 sha2 crc32 934 935 ### cpuinfo: 936 937 processor : 0 938 BogoMIPS : 48.00 939 Features : fp asimd aes pmull sha1 sha2 crc32 940 CPU implementer : 0x41 941 CPU architecture: 8 942 CPU variant : 0x0 943 CPU part : 0xd03 944 CPU revision : 4 945 946 processor : 1 947 BogoMIPS : 48.00 948 Features : fp asimd aes pmull sha1 sha2 crc32 949 CPU implementer : 0x41 950 CPU architecture: 8 951 CPU variant : 0x0 952 CPU part : 0xd03 953 CPU revision : 4 954 955 processor : 2 956 BogoMIPS : 48.00 957 Features : fp asimd aes pmull sha1 sha2 crc32 958 CPU implementer : 0x41 959 CPU architecture: 8 960 CPU variant : 0x0 961 CPU part : 0xd03 962 CPU revision : 4 963 964 processor : 3 965 BogoMIPS : 48.00 966 Features : fp asimd aes pmull sha1 sha2 crc32 967 CPU implementer : 0x41 968 CPU architecture: 8 969 CPU variant : 0x0 970 CPU part : 0xd03 971 CPU revision : 4 972 973 974 ### meminfo: 975 976 MemTotal: 989056 kB 977 MemFree: 798616 kB 978 MemAvailable: 885636 kB 979 Buffers: 15588 kB 980 Cached: 78536 kB 981 SwapCached: 0 kB 982 Active: 65408 kB 983 Inactive: 49780 kB 984 Active(anon): 21248 kB 985 Inactive(anon): 656 kB 986 Active(file): 44160 kB 987 Inactive(file): 49124 kB 988 Unevictable: 0 kB 989 Mlocked: 0 kB 990 SwapTotal: 494524 kB 991 SwapFree: 494524 kB 992 Dirty: 2748 kB 993 Writeback: 0 kB 994 AnonPages: 21120 kB 995 Mapped: 24344 kB 996 Shmem: 828 kB 997 Slab: 32928 kB 998 SReclaimable: 9116 kB 999 SUnreclaim: 23812 kB 1000 KernelStack: 2560 kB 1001 PageTables: 1056 kB 1002 NFS_Unstable: 0 kB 1003 Bounce: 0 kB 1004 WritebackTmp: 0 kB 1005 CommitLimit: 989052 kB 1006 Committed_AS: 79260 kB 1007 VmallocTotal: 263061440 kB 1008 VmallocUsed: 0 kB 1009 VmallocChunk: 0 kB 1010 CmaTotal: 16384 kB 1011 CmaFree: 7468 kB 1012 HugePages_Total: 0 1013 HugePages_Free: 0 1014 HugePages_Rsvd: 0 1015 HugePages_Surp: 0 1016 Hugepagesize: 2048 kB 1017 1018 ### virtual memory: 1019 1020 vm.admin_reserve_kbytes = 8192 1021 vm.block_dump = 0 1022 vm.compact_unevictable_allowed = 1 1023 vm.dirty_background_bytes = 0 1024 vm.dirty_background_ratio = 10 1025 vm.dirty_bytes = 0 1026 vm.dirty_expire_centisecs = 3000 1027 vm.dirty_ratio = 20 1028 vm.dirtytime_expire_seconds = 43200 1029 vm.dirty_writeback_centisecs = 500 1030 vm.extfrag_threshold = 500 1031 vm.extra_free_kbytes = 0 1032 vm.hugepages_treat_as_movable = 0 1033 vm.hugetlb_shm_group = 0 1034 vm.laptop_mode = 0 1035 vm.legacy_va_layout = 0 1036 vm.lowmem_reserve_ratio = 256 32 1037 vm.max_map_count = 65530 1038 vm.min_free_kbytes = 3937 1039 vm.mmap_min_addr = 4096 1040 vm.mmap_rnd_bits = 18 1041 vm.mmap_rnd_compat_bits = 11 1042 vm.nr_hugepages = 0 1043 vm.nr_overcommit_hugepages = 0 1044 vm.nr_pdflush_threads = 0 1045 vm.oom_dump_tasks = 1 1046 vm.oom_kill_allocating_task = 0 1047 vm.overcommit_kbytes = 0 1048 vm.overcommit_memory = 0 1049 vm.overcommit_ratio = 50 1050 vm.page-cluster = 0 1051 vm.panic_on_oom = 0 1052 vm.percpu_pagelist_fraction = 0 1053 vm.stat_interval = 1 1054 vm.swappiness = 100 1055 vm.user_reserve_kbytes = 30004 1056 vm.vfs_cache_pressure = 100 1057 vm.watermark_scale_factor = 10 1058 1059 ### ip addr: 1060 1061 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 1062 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 1063 inet XXX.XXX.0.1/8 scope host lo 1064 valid_lft forever preferred_lft forever 1065 inet6 ::1/128 scope host noprefixroute 1066 valid_lft forever preferred_lft forever 1067 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 1068 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 1069 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 1070 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 1071 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 1072 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 1073 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 1074 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 1075 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 1076 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 1077 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 1078 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 1079 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 1080 link/tunnel6 :: brd :: 1081 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 1082 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 1083 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 1084 link/tunnel6 :: brd :: 1085 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 1086 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 1087 1088 ### partitions: 1089 1090 major minor #blocks name 1091 1092 179 0 62410752 mmcblk0 1093 179 1 61763584 mmcblk0p1 1094 253 0 494528 zram0 1095 253 1 51200 zram1 1096 1097 ### df: 1098 1099 udev 466M 0 466M 0% /dev 1100 tmpfs 97M 2.1M 95M 3% /run 1101 /dev/mmcblk0p1 58G 5.7G 52G 10% / 1102 tmpfs 483M 0 483M 0% /dev/shm 1103 tmpfs 5.0M 0 5.0M 0% /run/lock 1104 tmpfs 483M 4.0K 483M 1% /tmp 1105 /dev/zram1 47M 2.4M 41M 6% /var/log 1106 1107 ### lsblk: 1108 1109 NAME FSTYPE SIZE MOUNTPOINT UUID 1110 mmcblk0 59.5G 1111 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 1112 zram1 50M /var/log 1113 zram2 0B 1114 1115 ### zramctl: 1116 1117 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 1118 /dev/zram1 lz4 50M 2.4M 565.1K 932K 4 /var/log 1119 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 1120 1121 ### mtab: 1122 1123 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 1124 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 1125 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 1126 1127 ### mmc0:0001 info: 1128 1129 manfid: 0x0000fe 1130 cid: fe3432534431364720000000690091f5 1131 fwrev: 0x0 1132 csd: 400e00325b590001dc277f800a40008b 1133 ocr: 0x00200000 1134 type: SD 1135 date: 01/2009 1136 hwrev: 0x2 1137 dsr: 0x404 1138 serial: 0x00000069 1139 erase_size: 512 1140 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 1141 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 1142 scr: 0285808300000000 1143 oemid: 0x3432 1144 preferred_erase_size: 4194304 1145 name: SD16G 1146 1147 ### Boot system health: 1148 1149 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 1150 10:14:14 1512 MHz 1.17 39% 19% 13% 0% 6% 0% 50.0 °C 0/5 1151 10:14:14 1512 MHz 1.17 94% 31% 28% 0% 34% 0% 47.9 °C 0/5 1152 10:14:15 1512 MHz 1.17 100% 29% 55% 1% 14% 0% 47.9 °C 0/5 1153 10:14:15 1512 MHz 1.17 99% 32% 59% 1% 6% 0% 50.0 °C 0/5 1154 10:14:15 1512 MHz 1.17 96% 31% 34% 1% 29% 0% 50.0 °C 0/5 1155 1156 ### Activated 1 lzo zram swap devices with 482MB each. 1157 ### Activated Armbian ramlog partition with lz4 compression 1158 1159 Mon Sep 25 11:53:07 AM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 1160 1161 ### dmesg: 1162 1163 [ 0.000000] Booting Linux on physical CPU 0x0 1164 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 1165 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 1166 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 1167 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 1168 [ 0.000000] On node 0 totalpages: 262144 1169 [ 0.000000] DMA zone: 4096 pages used for memmap 1170 [ 0.000000] DMA zone: 0 pages reserved 1171 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 1172 [ 0.000000] psci: probing for conduit method from DT. 1173 [ 0.000000] psci: PSCIv1.0 detected in firmware. 1174 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 1175 [ 0.000000] psci: Trusted OS migration not required 1176 [ 0.000000] psci: SMC Calling Convention v1.0 1177 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 1178 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 1179 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 1180 [ 0.000000] Detected VIPT I-cache on CPU0 1181 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 1182 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 1183 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 1184 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 1185 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 1186 [ 0.000000] log_buf_len min size: 131072 bytes 1187 [ 0.000000] log_buf_len: 524288 bytes 1188 [ 0.000000] early log buf free: 129352(98%) 1189 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 1190 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 1191 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 1192 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 1193 [ 0.000000] Virtual kernel memory layout: 1194 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 1195 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 1196 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 1197 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 1198 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 1199 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 1200 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 1201 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 1202 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 1203 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 1204 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 1205 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 1206 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 1207 [ 0.000000] Preemptible hierarchical RCU implementation. 1208 [ 0.000000] Build-time adjustment of leaf fanout to 64. 1209 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 1210 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 1211 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 1212 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 1213 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 1214 [ 0.000213] Console: colour dummy device 80x25 1215 [ 0.000228] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 1216 [ 0.000237] pid_max: default: 32768 minimum: 301 1217 [ 0.000434] Security Framework initialized 1218 [ 0.000442] AppArmor: AppArmor disabled by boot time parameter 1219 [ 0.000561] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 1220 [ 0.000567] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 1221 [ 0.001842] sched-energy: CPU device node has no sched-energy-costs 1222 [ 0.001857] Invalid sched_group_energy for CPU0 1223 [ 0.001864] CPU0: update cpu_capacity 1024 1224 [ 0.008938] ASID allocator initialised with 32768 entries 1225 [ 0.027948] BOOTEVENT: 27.933457: ON 1226 [ 0.055888] Detected VIPT I-cache on CPU1 1227 [ 0.055944] Invalid sched_group_energy for CPU1 1228 [ 0.055947] CPU1: update cpu_capacity 1024 1229 [ 0.055951] CPU1: Booted secondary processor [410fd034] 1230 [ 0.079275] Detected VIPT I-cache on CPU2 1231 [ 0.079313] Invalid sched_group_energy for CPU2 1232 [ 0.079316] CPU2: update cpu_capacity 1024 1233 [ 0.079319] CPU2: Booted secondary processor [410fd034] 1234 [ 0.102675] Detected VIPT I-cache on CPU3 1235 [ 0.102708] Invalid sched_group_energy for CPU3 1236 [ 0.102711] CPU3: update cpu_capacity 1024 1237 [ 0.102714] CPU3: Booted secondary processor [410fd034] 1238 [ 0.102794] Brought up 4 CPUs 1239 [ 0.102802] SMP: Total of 4 processors activated. 1240 [ 0.102810] CPU features: detected feature: 32-bit EL0 Support 1241 [ 0.102816] CPU features: detected feature: Kernel page table isolation (KPTI) 1242 [ 0.106583] CPU: All CPU(s) started at EL1 1243 [ 0.106605] alternatives: patching kernel code 1244 [ 0.106777] Invalid sched_group_energy for CPU3 1245 [ 0.106787] CPU3: update max cpu_capacity 1024 1246 [ 0.106792] Invalid sched_group_energy for Cluster3 1247 [ 0.106797] Invalid sched_group_energy for CPU2 1248 [ 0.106803] Invalid sched_group_energy for Cluster2 1249 [ 0.106807] Invalid sched_group_energy for CPU1 1250 [ 0.106813] Invalid sched_group_energy for Cluster1 1251 [ 0.106818] Invalid sched_group_energy for CPU0 1252 [ 0.106823] Invalid sched_group_energy for Cluster0 1253 [ 0.108245] devtmpfs: initialized 1254 [ 0.112692] CPU1: update max cpu_capacity 1024 1255 [ 0.143351] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 1256 [ 0.143380] futex hash table entries: 1024 (order: 5, 131072 bytes) 1257 [ 0.144036] xor: measuring software checksum speed 1258 [ 0.176245] 8regs : 1933.200 MB/sec 1259 [ 0.209624] 8regs_prefetch: 1720.800 MB/sec 1260 [ 0.243010] 32regs : 2287.200 MB/sec 1261 [ 0.276398] 32regs_prefetch: 1935.600 MB/sec 1262 [ 0.276403] xor: using function: 32regs (2287.200 MB/sec) 1263 [ 0.276463] atomic64_test: passed 1264 [ 0.276469] pinctrl core: initialized pinctrl subsystem 1265 [ 0.277635] NET: Registered protocol family 16 1266 [ 0.278886] dump_class_init,861, success 1267 [ 0.296463] cpuidle: using governor menu 1268 [ 0.297922] sunxi iommu: irq = 8 1269 [ 0.298242] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 1270 [ 0.298259] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 1271 [ 0.299679] DMA: preallocated 256 KiB pool for atomic allocations 1272 [ 0.301067] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 1273 [ 0.315448] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 1274 [ 0.319394] iommu: Adding device 1c0e000.ve to group 0 1275 [ 0.319896] iommu: Adding device 1c00000.vp9 to group 0 1276 [ 0.331325] iommu: Adding device 1000000.disp to group 0 1277 [ 0.332744] iommu: Adding device 1480000.g2d to group 0 1278 [ 0.335961] iommu: Adding device csi0 to group 0 1279 [ 0.336420] iommu: Adding device csi1 to group 0 1280 [ 0.337642] iommu: Adding device 6600800.vind:scaler@0 to group 0 1281 [ 0.337941] iommu: Adding device 6600800.vind:scaler@1 to group 0 1282 [ 0.338242] iommu: Adding device 6600800.vind:scaler@2 to group 0 1283 [ 0.338532] iommu: Adding device 6600800.vind:scaler@3 to group 0 1284 [ 0.338818] iommu: Adding device 6600800.vind:scaler@4 to group 0 1285 [ 0.339122] iommu: Adding device 6600800.vind:scaler@5 to group 0 1286 [ 0.340053] iommu: Adding device vinc0 to group 0 1287 [ 0.340603] iommu: Adding device vinc1 to group 0 1288 [ 0.342058] iommu: Adding device 1420000.deinterlace to group 0 1289 [ 0.384529] HugeTLB registered 2 MB page size, pre-allocated 0 pages 1290 [ 0.440807] raid6: int64x1 gen() 392 MB/s 1291 [ 0.497436] raid6: int64x1 xor() 362 MB/s 1292 [ 0.554273] raid6: int64x2 gen() 591 MB/s 1293 [ 0.611040] raid6: int64x2 xor() 512 MB/s 1294 [ 0.667771] raid6: int64x4 gen() 840 MB/s 1295 [ 0.724552] raid6: int64x4 xor() 629 MB/s 1296 [ 0.781384] raid6: int64x8 gen() 965 MB/s 1297 [ 0.838120] raid6: int64x8 xor() 655 MB/s 1298 [ 0.894922] raid6: neonx1 gen() 648 MB/s 1299 [ 0.951679] raid6: neonx1 xor() 641 MB/s 1300 [ 1.008469] raid6: neonx2 gen() 976 MB/s 1301 [ 1.065251] raid6: neonx2 xor() 819 MB/s 1302 [ 1.122039] raid6: neonx4 gen() 1287 MB/s 1303 [ 1.178809] raid6: neonx4 xor() 966 MB/s 1304 [ 1.235591] raid6: neonx8 gen() 1324 MB/s 1305 [ 1.292359] raid6: neonx8 xor() 991 MB/s 1306 [ 1.292365] raid6: using algorithm neonx8 gen() 1324 MB/s 1307 [ 1.292370] raid6: .... xor() 991 MB/s, rmw enabled 1308 [ 1.292375] raid6: using intx1 recovery algorithm 1309 [ 1.292510] pwm module init! 1310 [ 1.296809] sunxi-pm debug v3.10 1311 [ 1.297909] SCSI subsystem initialized 1312 [ 1.298536] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 1313 [ 1.298618] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 1314 [ 1.298739] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 1315 [ 1.299257] spi spi0: master is unqueued, this is deprecated 1316 [ 1.299566] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 1317 [ 1.300133] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 1318 [ 1.300213] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 1319 [ 1.300329] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 1320 [ 1.300793] spi spi1: master is unqueued, this is deprecated 1321 [ 1.301098] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 1322 [ 1.301944] usbcore: registered new interface driver usbfs 1323 [ 1.302032] usbcore: registered new interface driver hub 1324 [ 1.302103] usbcore: registered new device driver usb 1325 [ 1.302262] sunxi_i2c_adap_init()2522 - init 1326 [ 1.302818] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 1327 [ 1.302909] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 1328 [ 1.302917] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 1329 [ 1.302932] twi3 supply twi not found, using dummy regulator 1330 [ 1.303008] twi_request_gpio()451 - [i2c3] init name: twi3 1331 [ 1.303783] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 1332 [ 1.303866] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 1333 [ 1.303873] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 1334 [ 1.303887] twi5 supply twi not found, using dummy regulator 1335 [ 1.303965] twi_request_gpio()451 - [i2c5] init name: twi5 1336 [ 1.304443] axp20x-i2c 5-0036: AXP20x variant AXP806 found 1337 [ 1.323141] random: fast init done 1338 [ 1.334361] axp20x-i2c 5-0036: AXP20X driver loaded 1339 [ 1.334857] media: Linux media interface: v0.10 1340 [ 1.334941] Linux video capture interface: v2.00 1341 [ 1.335668] Advanced Linux Sound Architecture Driver Initialized. 1342 [ 1.336426] Bluetooth: Core ver 2.22 1343 [ 1.336493] NET: Registered protocol family 31 1344 [ 1.336499] Bluetooth: HCI device and connection manager initialized 1345 [ 1.336516] Bluetooth: HCI socket layer initialized 1346 [ 1.336528] Bluetooth: L2CAP socket layer initialized 1347 [ 1.336566] Bluetooth: SCO socket layer initialized 1348 [ 1.337339] [DISP]disp_module_init 1349 [ 1.338520] [DISP] parser_disp_init_para,line:1403: 1350 [ 1.338529] of_property_read fb0_width fail 1351 [ 1.338541] [DISP] disp_init,line:2215: 1352 [ 1.338546] smooth display screen:0 type:4 mode:10 1353 [ 1.355947] [DISP]disp_module_init finish 1354 [ 1.356888] clocksource: Switched to clocksource arch_sys_counter 1355 [ 1.357129] VFS: Disk quotas dquot_6.6.0 1356 [ 1.357217] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 1357 [ 1.357965] Console: switching to colour frame buffer device 240x67 1358 [ 1.401241] NET: Registered protocol family 2 1359 [ 1.401365] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 1360 [ 1.417139] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 1361 [ 1.417212] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 1362 [ 1.417336] TCP: Hash tables configured (established 8192 bind 8192) 1363 [ 1.417423] UDP hash table entries: 512 (order: 2, 16384 bytes) 1364 [ 1.417451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 1365 [ 1.417772] NET: Registered protocol family 1 1366 [ 1.418326] RPC: Registered named UNIX socket transport module. 1367 [ 1.418331] RPC: Registered udp transport module. 1368 [ 1.418336] RPC: Registered tcp transport module. 1369 [ 1.418339] RPC: Registered tcp NFSv4.1 backchannel transport module. 1370 [ 1.418579] Trying to unpack rootfs image as initramfs... 1371 [ 2.172813] Freeing initrd memory: 17256K 1372 [ 2.173902] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 1373 [ 2.177824] audit: initializing netlink subsys (disabled) 1374 [ 2.177911] audit: type=2000 audit(2.173:1): initialized 1375 [ 2.178866] workingset: timestamp_bits=45 max_order=18 bucket_order=0 1376 [ 2.190066] DLM installed 1377 [ 2.191956] squashfs: version 4.0 (2009/01/31) Phillip Lougher 1378 [ 2.192295] Registering sdcardfs 0.1 1379 [ 2.192766] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 1380 [ 2.194332] ntfs: driver 2.1.32 [Flags: R/W]. 1381 [ 2.201080] NET: Registered protocol family 38 1382 [ 2.201448] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 1383 [ 2.201597] io scheduler noop registered 1384 [ 2.201605] io scheduler deadline registered 1385 [ 2.201769] io scheduler cfq registered (default) 1386 [ 2.203715] failed to get easy_light_used assign 1387 [ 2.203726] failed to get normal led pin assign 1388 [ 2.203731] failed to get standby led pin assign 1389 [ 2.203736] failed to get standby led pin assign 1390 [ 2.203742] these is zero number for gpio 1391 [ 2.203746] gpio_init finish with uesd 1392 [ 2.206782] uart uart0: get regulator failed 1393 [ 2.207027] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 1394 [ 2.207051] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 1395 [ 2.207127] console [ttyS0] enabled 1396 [ 2.207945] uart uart1: get regulator failed 1397 [ 2.208135] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 1398 [ 2.208892] uart uart5: get regulator failed 1399 [ 2.209082] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 1400 [ 2.210652] misc dump reg init 1401 [ 2.211842] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 1402 [ 2.212179] Unable to detect cache hierarchy for CPU 0 1403 [ 2.226192] brd: module loaded 1404 [ 2.234375] loop: module loaded 1405 [ 2.234564] [NAND][NE] Not found valid nand node on dts 1406 [ 2.235154] Get boot type cmd line fail 1407 [ 2.235732] sunxi-bt soc@03000000:bt: Missing bt_power. 1408 [ 2.235742] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 1409 [ 2.235749] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 1410 [ 2.235756] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 1411 [ 2.235812] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 1412 [ 2.235884] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 1413 [ 2.236710] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 1414 [ 2.236721] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 1415 [ 2.236728] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 1416 [ 2.236736] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 1417 [ 2.236743] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 1418 [ 2.236772] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 1419 [ 2.236806] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 1420 [ 2.236814] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 1421 [ 2.236832] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 1422 [ 2.237851] [ADDR_MGT] addr_mgt_probe: success. 1423 [ 2.244289] tun: Universal TUN/TAP device driver, 1.6 1424 [ 2.244298] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 1425 [ 2.246294] gmac-power0: NULL 1426 [ 2.246303] gmac-power1: NULL 1427 [ 2.246310] gmac-power2: NULL 1428 [ 2.247346] PPP generic driver version 2.4.2 1429 [ 2.247633] PPP BSD Compression module registered 1430 [ 2.247643] PPP Deflate Compression module registered 1431 [ 2.247670] PPP MPPE Compression module registered 1432 [ 2.247679] NET: Registered protocol family 24 1433 [ 2.247712] PPTP driver version 0.8.5 1434 [ 2.248074] usbcore: registered new interface driver r8152 1435 [ 2.248149] usbcore: registered new interface driver asix 1436 [ 2.248259] usbcore: registered new interface driver ax88179_178a 1437 [ 2.248326] usbcore: registered new interface driver cdc_ether 1438 [ 2.248388] usbcore: registered new interface driver net1080 1439 [ 2.248447] usbcore: registered new interface driver cdc_subset 1440 [ 2.248510] usbcore: registered new interface driver zaurus 1441 [ 2.248604] usbcore: registered new interface driver cdc_ncm 1442 [ 2.248611] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 1443 [ 2.248973] get drv_vbus is fail, 84 1444 [ 2.248982] get ehci0-controller, regulator_io is no nocare 1445 [ 2.249246] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 1446 [ 2.249252] [sunxi-ehci0]: Not init ehci0 1447 [ 2.249365] get ehci1-controller, regulator_io is no nocare 1448 [ 2.249538] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 1449 [ 2.249595] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1450 [ 2.249622] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 1451 [ 2.250274] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 1452 [ 2.263582] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 1453 [ 2.263843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 1454 [ 2.263852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1455 [ 2.263860] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1456 [ 2.263867] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 1457 [ 2.263874] usb usb1: SerialNumber: sunxi-ehci 1458 [ 2.264739] hub 1-0:1.0: USB hub found 1459 [ 2.264787] hub 1-0:1.0: 1 port detected 1460 [ 2.265472] get drv_vbus is fail, 84 1461 [ 2.265480] get ehci2-controller, regulator_io is no nocare 1462 [ 2.265725] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 1463 [ 2.265777] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1464 [ 2.265802] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 1465 [ 2.266086] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 1466 [ 2.276904] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 1467 [ 2.277135] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 1468 [ 2.277144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1469 [ 2.277152] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1470 [ 2.277159] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 1471 [ 2.277165] usb usb2: SerialNumber: sunxi-ehci 1472 [ 2.278004] hub 2-0:1.0: USB hub found 1473 [ 2.278047] hub 2-0:1.0: 1 port detected 1474 [ 2.278715] get drv_vbus is fail, 84 1475 [ 2.278723] get ehci3-controller, regulator_io is no nocare 1476 [ 2.278968] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 1477 [ 2.279019] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1478 [ 2.279044] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 1479 [ 2.279340] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 1480 [ 2.290234] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 1481 [ 2.290420] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 1482 [ 2.290429] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1483 [ 2.290436] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1484 [ 2.290444] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 1485 [ 2.290450] usb usb3: SerialNumber: sunxi-ehci 1486 [ 2.291318] hub 3-0:1.0: USB hub found 1487 [ 2.291367] hub 3-0:1.0: 1 port detected 1488 [ 2.292292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 1489 [ 2.292658] get drv_vbus is fail, 84 1490 [ 2.292666] get ohci0-controller, regulator_io is no nocare 1491 [ 2.293007] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 1492 [ 2.293013] [sunxi-ohci0]: Not init ohci0 1493 [ 2.293128] get ohci1-controller, regulator_io is no nocare 1494 [ 2.293289] hci: request ohci1-controller gpio:80 1495 [ 2.293363] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 1496 [ 2.293413] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 1497 [ 2.293439] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 1498 [ 2.293518] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 1499 [ 2.354426] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 1500 [ 2.354438] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1501 [ 2.354445] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 1502 [ 2.354452] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 1503 [ 2.354459] usb usb4: SerialNumber: sunxi-ohci 1504 [ 2.355317] hub 4-0:1.0: USB hub found 1505 [ 2.355364] hub 4-0:1.0: 1 port detected 1506 [ 2.356047] get drv_vbus is fail, 84 1507 [ 2.356055] get ohci2-controller, regulator_io is no nocare 1508 [ 2.356390] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 1509 [ 2.356438] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 1510 [ 2.356464] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 1511 [ 2.356541] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 1512 [ 2.414401] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 1513 [ 2.414412] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1514 [ 2.414420] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 1515 [ 2.414427] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 1516 [ 2.414434] usb usb5: SerialNumber: sunxi-ohci 1517 [ 2.415308] hub 5-0:1.0: USB hub found 1518 [ 2.415355] hub 5-0:1.0: 1 port detected 1519 [ 2.416037] get drv_vbus is fail, 84 1520 [ 2.416046] get ohci3-controller, regulator_io is no nocare 1521 [ 2.416372] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 1522 [ 2.416422] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 1523 [ 2.416452] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 1524 [ 2.416529] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 1525 [ 2.474400] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 1526 [ 2.474410] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1527 [ 2.474418] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 1528 [ 2.474425] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 1529 [ 2.474432] usb usb6: SerialNumber: sunxi-ohci 1530 [ 2.475298] hub 6-0:1.0: USB hub found 1531 [ 2.475343] hub 6-0:1.0: 1 port detected 1532 [ 2.476263] ohci-platform: OHCI generic platform driver 1533 [ 2.477022] usbcore: registered new interface driver uas 1534 [ 2.477190] usbcore: registered new interface driver usb-storage 1535 [ 2.477275] usbcore: registered new interface driver ums-alauda 1536 [ 2.477351] usbcore: registered new interface driver ums-cypress 1537 [ 2.477424] usbcore: registered new interface driver ums-datafab 1538 [ 2.477496] usbcore: registered new interface driver ums_eneub6250 1539 [ 2.477573] usbcore: registered new interface driver ums-freecom 1540 [ 2.477650] usbcore: registered new interface driver ums-isd200 1541 [ 2.477721] usbcore: registered new interface driver ums-jumpshot 1542 [ 2.477792] usbcore: registered new interface driver ums-karma 1543 [ 2.477869] usbcore: registered new interface driver ums-onetouch 1544 [ 2.477958] usbcore: registered new interface driver ums-realtek 1545 [ 2.478037] usbcore: registered new interface driver ums-sddr09 1546 [ 2.478108] usbcore: registered new interface driver ums-sddr55 1547 [ 2.478191] usbcore: registered new interface driver ums-usbat 1548 [ 2.478340] usb_serial_number:20080411 1549 [ 2.479564] input: sunxi-keyboard as /devices/virtual/input/input0 1550 [ 2.480203] usbcore: registered new interface driver xpad 1551 [ 2.480364] usbcore: registered new interface driver usb_acecad 1552 [ 2.480452] usbcore: registered new interface driver aiptek 1553 [ 2.480528] usbcore: registered new interface driver gtco 1554 [ 2.480605] usbcore: registered new interface driver hanwang 1555 [ 2.480693] usbcore: registered new interface driver kbtab 1556 [ 2.481153] axp2101_pek: axp2101-pek can not register without irq 1557 [ 2.481176] axp2101-pek: probe of axp2101-pek.0 failed with error -22 1558 [ 2.482643] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 1559 [ 2.482710] sunxi-rtc rtc: RTC enabled 1560 [ 2.483183] i2c /dev entries driver 1561 [ 2.484007] lirc_dev: IR Remote Control driver registered, major 244 1562 [ 2.484018] IR NEC protocol handler initialized 1563 [ 2.484025] IR RC5(x/sz) protocol handler initialized 1564 [ 2.484030] IR RC6 protocol handler initialized 1565 [ 2.484036] IR JVC protocol handler initialized 1566 [ 2.484041] IR Sony protocol handler initialized 1567 [ 2.484047] IR SANYO protocol handler initialized 1568 [ 2.484053] IR Sharp protocol handler initialized 1569 [ 2.484059] IR MCE Keyboard/mouse protocol handler initialized 1570 [ 2.484064] IR LIRC bridge handler initialized 1571 [ 2.484070] IR XMP protocol handler initialized 1572 [ 2.484595] sunxi_ir_startup: get ir protocol failed 1573 [ 2.484637] 7040000.s_cir supply ir0 not found, using dummy regulator 1574 [ 2.484818] Registered IR keymap rc_map_sunxi 1575 [ 2.485206] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 1576 [ 2.485444] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 1577 [ 2.486430] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 1578 [ 2.487074] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 1579 [ 2.487772] sunxi cedar version 0.1 1580 [ 2.487968] VE: install start!!! 1581 1582 [ 2.488154] cedar_ve: cedar-ve the get irq is 278 1583 [ 2.488790] VE: get debugfs_mpp_root is NULL, please check mpp 1584 1585 [ 2.488807] VE: sunxi ve debug register driver failed! 1586 1587 [ 2.492026] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 1588 [ 2.493331] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 1589 [ 2.493695] Bluetooth: HCI UART driver ver 2.3 1590 [ 2.493706] Bluetooth: HCI UART protocol H4 registered 1591 [ 2.493712] Bluetooth: HCI UART protocol LL registered 1592 [ 2.493718] Bluetooth: HCI UART protocol Three-wire (H5) registered 1593 [ 2.498055] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 1594 [ 2.498079] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 1595 [ 2.498099] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 1596 [ 2.498122] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 1597 [ 2.498140] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 1598 [ 2.498152] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 1599 [ 2.498522] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 1600 [ 2.498625] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 1601 [ 2.498822] sunxi-mmc sdc0: No vmmc regulator found 1602 [ 2.498829] sunxi-mmc sdc0: No vqmmc regulator found 1603 [ 2.498836] sunxi-mmc sdc0: No vdmmc regulator found 1604 [ 2.498842] sunxi-mmc sdc0: No vd33sw regulator found 1605 [ 2.498848] sunxi-mmc sdc0: No vd18sw regulator found 1606 [ 2.498855] sunxi-mmc sdc0: No vq33sw regulator found 1607 [ 2.498861] sunxi-mmc sdc0: No vq18sw regulator found 1608 [ 2.499542] sunxi-mmc sdc0: set host busy 1609 [ 2.499650] sunxi-mmc sdc0: Got CD GPIO 1610 [ 2.500017] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 1611 [ 2.500052] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 1612 [ 2.513611] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1613 [ 2.530461] sunxi-mmc sdc0: detmode:gpio irq 1614 [ 2.530595] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1615 [ 2.533100] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1616 [ 2.533807] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 1617 [ 2.533916] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 1618 [ 2.534055] sunxi-mmc sdc1: No vmmc regulator found 1619 [ 2.534062] sunxi-mmc sdc1: No vqmmc regulator found 1620 [ 2.534069] sunxi-mmc sdc1: No vdmmc regulator found 1621 [ 2.534075] sunxi-mmc sdc1: No vd33sw regulator found 1622 [ 2.534081] sunxi-mmc sdc1: No vd18sw regulator found 1623 [ 2.534088] sunxi-mmc sdc1: No vq33sw regulator found 1624 [ 2.534094] sunxi-mmc sdc1: No vq18sw regulator found 1625 [ 2.534875] sunxi-mmc sdc1: set host busy 1626 [ 2.534959] mmc:failed to get gpios 1627 [ 2.535163] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1628 [ 2.535258] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 1629 [ 2.537725] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1630 [ 2.550295] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1631 [ 2.561346] mmc0: host does not support reading read-only switch, assuming write-enable 1632 [ 2.563205] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 1633 [ 2.563280] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 1634 [ 2.563558] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 1635 [ 2.563650] mmc0: new high speed SDXC card at address 0001 1636 [ 2.564765] mmcblk0: mmc0:0001 SD16G 59.5 GiB 1637 [ 2.566296] mmcblk0: p1 1638 [ 2.566959] sunxi-mmc sdc1: detmode:manually by software 1639 [ 2.569167] ledtrig-cpu: registered to indicate activity on CPUs 1640 [ 2.569901] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 1641 [ 2.570752] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 1642 [ 2.570783] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1643 [ 2.573287] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1644 [ 2.575096] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 1645 [ 2.575106] sunxi_emce_probe()590emce hw init failed! 1646 [ 2.575133] emce: probe of emce failed with error -2 1647 [ 2.575228] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 1648 [ 2.575408] hidraw: raw HID events driver (C) Jiri Kosina 1649 [ 2.576075] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 1650 [ 2.576936] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 1651 [ 2.577793] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 1652 [ 2.577841] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 1653 [ 2.579927] usbcore: registered new interface driver usbhid 1654 [ 2.579937] usbhid: USB HID core driver 1655 [ 2.581469] optee: probing for conduit method from DT. 1656 [ 2.581482] optee: api uid mismatch 1657 [ 2.582016] usbcore: registered new interface driver snd-usb-audio 1658 [ 2.583647] [sunxi_hdmi_codec_init] driver and deivce register finished. 1659 [ 2.585342] [sunxi_internal_codec_probe]:get audio avcc failed 1660 [ 2.585381] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 1661 [ 2.585630] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 1662 [ 2.588135] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 1663 [ 2.590112] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 1664 [ 2.590125] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 1665 [ 2.592459] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 1666 [ 2.592485] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 1667 [ 2.596456] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 1668 [ 2.598249] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 1669 [ 2.600150] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 1670 [ 2.603089] pktgen: Packet Generator for packet performance testing. Version: 2.75 1671 [ 2.603526] u32 classifier 1672 [ 2.603533] Actions configured 1673 [ 2.603592] Netfilter messages via NETLINK v0.30. 1674 [ 2.603647] nfnl_acct: registering with nfnetlink. 1675 [ 2.603996] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 1676 [ 2.604247] ctnetlink v0.93: registering with nfnetlink. 1677 [ 2.605014] xt_time: kernel timezone is -0000 1678 [ 2.605038] IPVS: Registered protocols (TCP, UDP) 1679 [ 2.605147] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 1680 [ 2.605271] IPVS: Creating netns size=1928 id=0 1681 [ 2.605401] IPVS: ipvs loaded. 1682 [ 2.605409] IPVS: [rr] scheduler registered. 1683 [ 2.605506] ipip: IPv4 and MPLS over IPv4 tunneling driver 1684 [ 2.606212] gre: GRE over IPv4 demultiplexor driver 1685 [ 2.606220] ip_gre: GRE over IPv4 tunneling driver 1686 [ 2.607609] IPv4 over IPsec tunneling driver 1687 [ 2.608486] ip_tables: (C) 2000-2006 Netfilter Core Team 1688 [ 2.608765] arp_tables: arp_tables: (C) 2002 David S. Miller 1689 [ 2.608830] Initializing XFRM netlink socket 1690 [ 2.608865] IPsec XFRM device driver 1691 [ 2.609703] NET: Registered protocol family 10 1692 [ 2.611651] mip6: Mobile IPv6 1693 [ 2.611691] ip6_tables: (C) 2000-2006 Netfilter Core Team 1694 [ 2.613001] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 1695 [ 2.614688] NET: Registered protocol family 17 1696 [ 2.614730] NET: Registered protocol family 15 1697 [ 2.614888] Bridge firewalling registered 1698 [ 2.615022] Bluetooth: RFCOMM TTY layer initialized 1699 [ 2.615040] Bluetooth: RFCOMM socket layer initialized 1700 [ 2.615072] Bluetooth: RFCOMM ver 1.11 1701 [ 2.615087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 1702 [ 2.615092] Bluetooth: BNEP filters: protocol multicast 1703 [ 2.615105] Bluetooth: BNEP socket layer initialized 1704 [ 2.615111] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 1705 [ 2.615123] Bluetooth: HIDP socket layer initialized 1706 [ 2.615216] l2tp_core: L2TP core driver, V2.0 1707 [ 2.615230] l2tp_ppp: PPPoL2TP kernel driver, V2.0 1708 [ 2.615236] 8021q: 802.1Q VLAN Support v1.8 1709 [ 2.615435] sctp: Hash tables configured (bind 256/256) 1710 [ 2.616036] Key type dns_resolver registered 1711 [ 2.616177] Registered cp15_barrier emulation handler 1712 [ 2.616190] Registered setend emulation handler 1713 [ 2.617224] registered taskstats version 1 1714 [ 2.628757] zswap: default zpool zbud not available 1715 [ 2.628764] zswap: pool creation failed 1716 [ 2.631550] Btrfs loaded, crc32c=crc32c-arm64-hw 1717 [ 2.632312] HDMI 2.0 driver init start! 1718 [ 2.632327] boot_hdmi=true 1719 [ 2.633141] Can not find the node of esm 1720 [ 2.633159] ERROR: pinctrl_get for HDMI2.0 DDC fail 1721 [ 2.633247] Get hdmi_power0:vcc-hdmi 1722 [ 2.633286] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 1723 [ 2.633458] Get hdmi_power1:vdd-hdmi 1724 [ 2.633480] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 1725 [ 2.635080] hdmi_cec_init 1726 [ 2.635565] [DISP] disp_device_attached,line:146: 1727 [ 2.635574] attached ok, mgr0<-->device0, type=4 1728 [ 2.635585] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 1729 [ 2.635598] [DISP] disp_hdmi_set_mode,line:648: 1730 [ 2.635602] hdmi_set_mode is null! 1731 [ 2.637248] HDMI2.0 module init end 1732 [ 2.648351] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 1733 [ 2.651812] cpu cpu1: opp_list_debug_create_link: Failed to create link 1734 [ 2.651824] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 1735 [ 2.651859] cpu cpu2: opp_list_debug_create_link: Failed to create link 1736 [ 2.651867] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 1737 [ 2.651897] cpu cpu3: opp_list_debug_create_link: Failed to create link 1738 [ 2.651904] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 1739 [ 2.654207] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 1740 [ 2.655096] get det_vbus is fail, 84 1741 [ 2.655103] get id is fail, 84 1742 [ 2.655576] sunxi-rtc rtc: setting system clock to 2023-09-25 14:52:49 UTC (1695653569) 1743 [ 2.659337] ALSA device list: 1744 [ 2.659345] #0: audiocodec 1745 [ 2.659349] #1: sndahub 1746 [ 2.659352] #2: sndhdmi 1747 [ 2.661025] Freeing unused kernel memory: 3008K 1748 [ 2.706769] random: systemd-udevd: uninitialized urandom read (16 bytes read) 1749 [ 2.708870] random: systemd-udevd: uninitialized urandom read (16 bytes read) 1750 [ 2.711780] random: systemd-udevd: uninitialized urandom read (16 bytes read) 1751 [ 2.783214] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 1752 [ 2.943730] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 1753 [ 3.040328] HDMI cable is connected 1754 [ 3.293593] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 1755 [ 3.514094] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 1756 [ 3.514104] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 1757 [ 3.514109] usb 4-1: Product: Rapoo 2.4G Wireless Device 1758 [ 3.514113] usb 4-1: Manufacturer: RAPOO 1759 [ 3.521911] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 1760 [ 3.522440] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 1761 [ 3.528055] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 1762 [ 3.584346] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 1763 [ 3.588361] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 1764 [ 3.644493] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 1765 [ 4.173433] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 1766 [ 5.101534] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 1767 [ 5.102087] cgroup: cgroup2: unknown option "nsdelegate" 1768 [ 5.122256] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 1769 [ 5.122280] systemd[1]: Detected architecture arm64. 1770 [ 5.123378] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 1771 [ 5.140746] systemd[1]: Hostname set to <opi>. 1772 [ 5.168066] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 1773 [ 6.722904] (sd-execut[1458]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 1774 [ 6.826941] 1775 insmod_device_driver 1776 1777 [ 6.827189] device_chose finished 124! 1778 [ 7.129729] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 1779 [ 7.369172] systemd[1]: Queued start job for default target graphical.target. 1780 [ 7.376823] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 1781 [ 7.379020] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 1782 [ 7.381318] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 1783 [ 7.382600] systemd[1]: Created slice user.slice - User and Session Slice. 1784 [ 7.383253] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 1785 [ 7.383868] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 1786 [ 7.384202] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 1787 [ 7.384756] systemd[1]: Reached target slices.target - Slice Units. 1788 [ 7.385090] systemd[1]: Reached target swap.target - Swaps. 1789 [ 7.385389] systemd[1]: Reached target time-set.target - System Time Set. 1790 [ 7.385902] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 1791 [ 7.403268] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 1792 [ 7.404433] systemd[1]: Listening on syslog.socket - Syslog Socket. 1793 [ 7.405388] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 1794 [ 7.406056] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 1795 [ 7.407727] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 1796 [ 7.408673] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 1797 [ 7.409695] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 1798 [ 7.411938] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 1799 [ 7.412834] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 1800 [ 7.416821] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 1801 [ 7.421468] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 1802 [ 7.426487] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 1803 [ 7.427699] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 1804 [ 7.428681] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 1805 [ 7.436271] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 1806 [ 7.441910] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 1807 [ 7.447703] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 1808 [ 7.454201] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 1809 [ 7.461600] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 1810 [ 7.470060] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 1811 [ 7.478698] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 1812 [ 7.486727] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 1813 [ 7.496520] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 1814 [ 7.498007] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 1815 [ 7.511229] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 1816 [ 7.517677] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 1817 [ 7.523815] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 1818 [ 7.525336] fuse init (API version 7.26) 1819 [ 7.536260] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 1820 [ 7.538668] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 1821 [ 7.541222] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 1822 [ 7.544423] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 1823 [ 7.549066] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 1824 [ 7.553679] systemd[1]: modprobe@configfs.service: Deactivated successfully. 1825 [ 7.554461] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 1826 [ 7.557916] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 1827 [ 7.558773] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 1828 [ 7.603516] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 1829 [ 7.612080] systemd[1]: modprobe@drm.service: Deactivated successfully. 1830 [ 7.627612] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 1831 [ 7.632507] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 1832 [ 7.640673] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 1833 [ 7.641758] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 1834 [ 7.641769] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 1835 [ 7.641965] spidev spi1.1: Deleting spi1.1 1836 [ 7.642784] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 1837 [ 7.643217] fbtft_device: GPIOS used by 'fb_st7735r': 1838 [ 7.643224] fbtft_device: 'reset' = GPIO73 1839 [ 7.643228] fbtft_device: 'dc' = GPIO70 1840 [ 7.643242] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 1841 [ 7.643247] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 1842 [ 7.644283] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 1843 [ 7.665419] systemd[1]: modprobe@fuse.service: Deactivated successfully. 1844 [ 7.680927] WCN: marlin_init entry! 1845 [ 7.682109] WCN: marlin_parse_dt reset gpio=211 1846 [ 7.682120] WCN_ERR: gpio reset request err: 211 1847 [ 7.682125] WCN: wcn config bt wake host 1848 [ 7.682626] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 1849 [ 7.682867] WCN: wcn config wifi wake host 1850 [ 7.682900] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 1851 [ 7.686401] sdiohal:sdiohal_init ok 1852 [ 7.687690] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 1853 [ 7.690160] WCN: marlin_probe ok! 1854 [ 7.692178] systemd[1]: modprobe@loop.service: Deactivated successfully. 1855 [ 7.693023] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 1856 [ 7.696210] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 1857 [ 7.699361] mtty_probe init device addr: 0xffffffc009a62f00 1858 [ 7.702980] -->rfkill_bluetooth_init 1859 [ 7.703219] <--rfkill_bluetooth_init 1860 [ 7.746330] WCN: start_marlin [MARLIN_WIFI] 1861 [ 7.746344] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 1862 [ 7.746348] WCN: the first power on start 1863 [ 7.753319] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 1864 [ 7.759541] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 1865 [ 7.760731] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 1866 [ 7.767285] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 1867 [ 7.768094] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 1868 [ 7.774614] systemd[1]: Starting systemd-sysusers.service - Create System Users... 1869 [ 7.790586] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 1870 [ 7.793206] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 1871 [ 7.808935] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 1872 [ 7.844542] systemd[1]: Finished systemd-sysusers.service - Create System Users. 1873 [ 7.851045] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 1874 [ 7.863660] WCN: marlin chip en pull up 1875 [ 7.893670] sdiohal:sdiohal_scan_card 1876 [ 7.893692] sunxi-wlan soc@03000000:wlan: bus_index: 1 1877 [ 7.893746] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 1878 [ 7.910290] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1879 [ 7.931090] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 1880 [ 7.932031] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 1881 [ 7.932076] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1882 [ 7.934615] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1883 [ 7.937717] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1884 [ 7.953107] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 1885 [ 7.953636] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1886 [ 7.955164] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 1887 [ 7.961258] systemd[1]: Mounting tmp.mount - /tmp... 1888 [ 7.967862] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 1889 [ 7.973982] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 1890 [ 7.974741] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 1891 [ 7.974807] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 1892 [ 7.975417] mmc1: new ultra high speed SDR104 SDIO card at address 8800 1893 [ 7.975947] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 1894 [ 7.976137] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 1895 [ 7.976159] WCN: marlin_scan_finish! 1896 [ 7.976164] sdiohal:probe ok 1897 [ 7.976179] sdiohal:scan end! 1898 [ 7.976185] WCN: then marlin start to download 1899 [ 7.976214] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 1900 [ 7.991119] systemd[1]: Mounted tmp.mount - /tmp. 1901 [ 7.993310] systemd[1]: Reached target local-fs.target - Local File Systems. 1902 [ 7.998567] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 1903 [ 8.004446] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 1904 [ 8.010353] systemd[1]: Starting console-setup.service - Set console font and keymap... 1905 [ 8.015562] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 1906 [ 8.041808] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 1907 [ 8.051646] systemd[1]: Starting ufw.service - Uncomplicated firewall... 1908 [ 8.056330] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 1909 [ 8.061917] systemd[1]: Finished console-setup.service - Set console font and keymap. 1910 [ 8.107595] WCN: combin_img 0 marlin_firmware_write finish and successful 1911 [ 8.107769] WCN: marlin_start_run read reset reg val:0x1 1912 [ 8.107773] WCN: after do marlin_start_run reset reg val:0x0 1913 [ 8.107983] WCN: s_marlin_bootup_time=8107975260 1914 [ 8.111812] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 1915 [ 8.113960] WCN: clock mode: TSX 1916 [ 8.114174] WCN: marlin_write_cali_data sync init_state:0x1a0f50 1917 [ 8.119656] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 1918 [ 8.123269] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 1919 [ 8.126534] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 1920 [ 8.128442] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 1921 [ 8.129410] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 1922 [ 8.134094] systemd[1]: Finished ufw.service - Uncomplicated firewall. 1923 [ 8.137291] systemd[1]: Received SIGRTMIN+20 from PID 1421 (plymouthd). 1924 [ 8.137872] systemd[1]: Reached target network-pre.target - Preparation for Network. 1925 [ 8.140733] WCN: marlin_write_cali_data sync init_state:0x1a0f50 1926 [ 8.167217] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 1927 [ 8.167226] WCN: sdio_config bt_wake_host trigger:[high] 1928 [ 8.167229] WCN: sdio_config irq:[inband] 1929 [ 8.167233] WCN: sdio_config wl_wake_host trigger:[high] 1930 [ 8.167241] WCN: sdio_config wake_host_level_duration_time:[20ms] 1931 [ 8.167244] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 1932 [ 8.167249] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 1933 [ 8.167615] WCN: marlin_write_cali_data finish 1934 [ 8.167904] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 1935 [ 8.193884] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 1936 [ 8.207431] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 1937 [ 8.210652] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 1938 [ 8.220528] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 1939 [ 8.247169] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 1940 [ 8.273851] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 1941 [ 8.300524] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 1942 [ 8.300534] WCN: marlin_bind_verify confuse data: 0x2e197f4f5a117df30c640a9405a3d69 1943 [ 8.300550] WCN: marlin_bind_verify verify data: 0x16d6ab91e1d71b3ae4604f224021aa 1944 [ 8.301247] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 1945 [ 8.327207] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 1946 [ 8.327216] sdiohal:sdiohal_runtime_get entry 1947 [ 8.327429] WCN: get_cp2_version entry! 1948 [ 8.329113] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 1949 [ 8.329144] WCN: switch_cp2_log - close entry! 1950 [ 8.330472] WCN: WCND at cmd read:OK 1951 [ 8.330551] WCN: then marlin download finished and run ok 1952 [ 8.330557] WCN: start_loopcheck 1953 [ 8.344877] WCN: get_board_ant_num [one_ant] 1954 [ 8.344888] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 1955 [ 8.405967] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 1956 [ 8.411352] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 1957 [ 8.419183] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 1958 [ 8.486413] zram: Added device: zram0 1959 [ 8.487193] zram: Added device: zram1 1960 [ 8.488112] zram: Added device: zram2 1961 [ 8.496220] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 1962 [ 8.504088] systemd[1]: Starting networking.service - Raise network interfaces... 1963 [ 8.521937] zswap: can't enable, initialization failed 1964 [ 8.580851] zram0: detected capacity change from 0 to 506396672 1965 [ 8.586326] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 1966 [ 8.603653] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 1967 [ 8.668634] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 1968 [ 8.685418] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 1969 [ 8.687924] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 1970 [ 8.688982] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 1971 [ 8.689622] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 1972 [ 9.128629] systemd[1]: Finished networking.service - Raise network interfaces. 1973 [ 9.763740] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 1974 [ 9.890189] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 1975 [ 10.028067] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 1976 [ 10.654680] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 1977 [ 10.654923] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 1978 [ 10.655554] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 1979 [ 10.667241] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 1980 [ 10.677764] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 1981 [ 10.684938] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 1982 [ 10.698026] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 1983 [ 10.702064] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 1984 [ 10.702944] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 1985 [ 10.707530] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 1986 [ 10.708623] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 1987 [ 10.711708] systemd[1]: modprobe@loop.service: Deactivated successfully. 1988 [ 10.712834] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 1989 [ 10.714975] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 1990 [ 10.715235] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 1991 [ 10.774342] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 1992 [ 10.779309] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 1993 [ 10.780190] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 1994 [ 10.792320] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 1995 [ 10.811076] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 1996 [ 10.857080] sunxi-bt soc@03000000:bt: set block: 0 1997 [ 10.873938] bluetooth_set_power: start_block=0 1998 [ 10.873950] WCN: start_marlin [MARLIN_BLUETOOTH] 1999 [ 10.873960] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 2000 [ 10.873965] WCN: marlin have open, GNSS is closed 2001 [ 10.873970] bluetooth_set_power: end_block=0 2002 [ 10.922196] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 2003 [ 11.094722] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 2004 [ 11.100559] systemd[1]: Starting brltty.service - Braille Device Support... 2005 [ 11.626231] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 2006 [ 11.768144] zram1: detected capacity change from 0 to 52428800 2007 [ 11.859100] systemd[1]: Started brltty.service - Braille Device Support. 2008 [ 11.873324] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 2009 [ 15.857495] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 2010 [ 15.863476] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 2011 [ 15.925725] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 2012 [ 15.937064] systemd[1]: systemd-rfkill.service: Deactivated successfully. 2013 [ 19.597599] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 2014 [ 19.604154] systemd[1]: Starting systemd-journald.service - Journal Service... 2015 [ 19.884029] systemd-journald[1921]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.2 (1658 of 2204 items, 1269760 file size, 765 bytes per hash table item), suggesting rotation. 2016 [ 19.884051] systemd-journald[1921]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 2017 [ 19.891164] systemd[1]: Started systemd-journald.service - Journal Service. 2018 [ 19.938167] systemd-journald[1921]: Received client request to flush runtime journal. 2019 [ 20.306857] IPVS: Creating netns size=1928 id=1 2020 2021 ### armbian-release: 2022 2023 # PLEASE DO NOT EDIT THIS FILE 2024 BOARD=orangepizero2 2025 BOARD_NAME="Orange Pi Zero2" 2026 BOARDFAMILY=sun50iw9 2027 BUILD_REPOSITORY_URL=https://github.com/armbian/build 2028 BUILD_REPOSITORY_COMMIT=ac829eb6 2029 LINUXFAMILY=sun50iw9 2030 ARCH=arm64 2031 IMAGE_TYPE=stable 2032 BOARD_TYPE=conf 2033 INITRD_ARCH=arm 2034 KERNEL_IMAGE_TYPE=Image 2035 FORCE_BOOTSCRIPT_UPDATE=yes 2036 VENDOR=Armbian 2037 BOOTSCRIPT_FORCE_UPDATE="yes" 2038 BOOTSCRIPT_DST="boot.cmd" 2039 VERSION=23.8.1 2040 REVISION=23.8.1 2041 BRANCH=legacy 2042 2043 ### boot environment: 2044 2045 verbosity=1 2046 console=serial 2047 #disp_mode=1080p60 2048 #fb0_width=1280 2049 #fb0_height=720 2050 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 2051 rootfstype=ext4 2052 overlays=spi-spidev 2053 param_spidev_spi_bus=1 2054 param_spidev_spi_cs=1 2055 extraargs=fbcon=map:1 2056 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 2057 2058 ### lsusb: 2059 2060 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 2061 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 2062 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 2063 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 2064 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 2065 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 2066 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 2067 2068 ### lscpu: 2069 2070 Architecture: aarch64 2071 CPU op-mode(s): 32-bit, 64-bit 2072 Byte Order: Little Endian 2073 CPU(s): 4 2074 On-line CPU(s) list: 0-3 2075 Vendor ID: ARM 2076 Model name: Cortex-A53 2077 Model: 4 2078 Thread(s) per core: 1 2079 Core(s) per cluster: 4 2080 Socket(s): - 2081 Cluster(s): 1 2082 Stepping: r0p4 2083 CPU(s) scaling MHz: 100% 2084 CPU max MHz: 1512.0000 2085 CPU min MHz: 480.0000 2086 BogoMIPS: 48.00 2087 Flags: fp asimd aes pmull sha1 sha2 crc32 2088 2089 ### cpuinfo: 2090 2091 processor : 0 2092 BogoMIPS : 48.00 2093 Features : fp asimd aes pmull sha1 sha2 crc32 2094 CPU implementer : 0x41 2095 CPU architecture: 8 2096 CPU variant : 0x0 2097 CPU part : 0xd03 2098 CPU revision : 4 2099 2100 processor : 1 2101 BogoMIPS : 48.00 2102 Features : fp asimd aes pmull sha1 sha2 crc32 2103 CPU implementer : 0x41 2104 CPU architecture: 8 2105 CPU variant : 0x0 2106 CPU part : 0xd03 2107 CPU revision : 4 2108 2109 processor : 2 2110 BogoMIPS : 48.00 2111 Features : fp asimd aes pmull sha1 sha2 crc32 2112 CPU implementer : 0x41 2113 CPU architecture: 8 2114 CPU variant : 0x0 2115 CPU part : 0xd03 2116 CPU revision : 4 2117 2118 processor : 3 2119 BogoMIPS : 48.00 2120 Features : fp asimd aes pmull sha1 sha2 crc32 2121 CPU implementer : 0x41 2122 CPU architecture: 8 2123 CPU variant : 0x0 2124 CPU part : 0xd03 2125 CPU revision : 4 2126 2127 2128 ### meminfo: 2129 2130 MemTotal: 989056 kB 2131 MemFree: 795972 kB 2132 MemAvailable: 885620 kB 2133 Buffers: 15732 kB 2134 Cached: 81084 kB 2135 SwapCached: 0 kB 2136 Active: 65604 kB 2137 Inactive: 52188 kB 2138 Active(anon): 21192 kB 2139 Inactive(anon): 652 kB 2140 Active(file): 44412 kB 2141 Inactive(file): 51536 kB 2142 Unevictable: 0 kB 2143 Mlocked: 0 kB 2144 SwapTotal: 494524 kB 2145 SwapFree: 494524 kB 2146 Dirty: 5340 kB 2147 Writeback: 0 kB 2148 AnonPages: 21100 kB 2149 Mapped: 24592 kB 2150 Shmem: 824 kB 2151 Slab: 33012 kB 2152 SReclaimable: 9044 kB 2153 SUnreclaim: 23968 kB 2154 KernelStack: 2528 kB 2155 PageTables: 1060 kB 2156 NFS_Unstable: 0 kB 2157 Bounce: 0 kB 2158 WritebackTmp: 0 kB 2159 CommitLimit: 989052 kB 2160 Committed_AS: 80292 kB 2161 VmallocTotal: 263061440 kB 2162 VmallocUsed: 0 kB 2163 VmallocChunk: 0 kB 2164 CmaTotal: 16384 kB 2165 CmaFree: 7468 kB 2166 HugePages_Total: 0 2167 HugePages_Free: 0 2168 HugePages_Rsvd: 0 2169 HugePages_Surp: 0 2170 Hugepagesize: 2048 kB 2171 2172 ### virtual memory: 2173 2174 vm.admin_reserve_kbytes = 8192 2175 vm.block_dump = 0 2176 vm.compact_unevictable_allowed = 1 2177 vm.dirty_background_bytes = 0 2178 vm.dirty_background_ratio = 10 2179 vm.dirty_bytes = 0 2180 vm.dirty_expire_centisecs = 3000 2181 vm.dirty_ratio = 20 2182 vm.dirtytime_expire_seconds = 43200 2183 vm.dirty_writeback_centisecs = 500 2184 vm.extfrag_threshold = 500 2185 vm.extra_free_kbytes = 0 2186 vm.hugepages_treat_as_movable = 0 2187 vm.hugetlb_shm_group = 0 2188 vm.laptop_mode = 0 2189 vm.legacy_va_layout = 0 2190 vm.lowmem_reserve_ratio = 256 32 2191 vm.max_map_count = 65530 2192 vm.min_free_kbytes = 3937 2193 vm.mmap_min_addr = 4096 2194 vm.mmap_rnd_bits = 18 2195 vm.mmap_rnd_compat_bits = 11 2196 vm.nr_hugepages = 0 2197 vm.nr_overcommit_hugepages = 0 2198 vm.nr_pdflush_threads = 0 2199 vm.oom_dump_tasks = 1 2200 vm.oom_kill_allocating_task = 0 2201 vm.overcommit_kbytes = 0 2202 vm.overcommit_memory = 0 2203 vm.overcommit_ratio = 50 2204 vm.page-cluster = 0 2205 vm.panic_on_oom = 0 2206 vm.percpu_pagelist_fraction = 0 2207 vm.stat_interval = 1 2208 vm.swappiness = 100 2209 vm.user_reserve_kbytes = 30004 2210 vm.vfs_cache_pressure = 100 2211 vm.watermark_scale_factor = 10 2212 2213 ### ip addr: 2214 2215 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 2216 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2217 inet XXX.XXX.0.1/8 scope host lo 2218 valid_lft forever preferred_lft forever 2219 inet6 ::1/128 scope host noprefixroute 2220 valid_lft forever preferred_lft forever 2221 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 2222 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 2223 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 2224 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 2225 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 2226 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 2227 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 2228 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 2229 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 2230 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 2231 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 2232 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 2233 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 2234 link/tunnel6 :: brd :: 2235 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 2236 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 2237 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 2238 link/tunnel6 :: brd :: 2239 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 2240 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 2241 2242 ### partitions: 2243 2244 major minor #blocks name 2245 2246 179 0 62410752 mmcblk0 2247 179 1 61763584 mmcblk0p1 2248 253 0 494528 zram0 2249 253 1 51200 zram1 2250 2251 ### df: 2252 2253 udev 466M 0 466M 0% /dev 2254 tmpfs 97M 900K 96M 1% /run 2255 /dev/mmcblk0p1 58G 5.7G 52G 10% / 2256 tmpfs 483M 0 483M 0% /dev/shm 2257 tmpfs 5.0M 0 5.0M 0% /run/lock 2258 tmpfs 483M 4.0K 483M 1% /tmp 2259 /dev/zram1 47M 4.8M 39M 11% /var/log 2260 2261 ### lsblk: 2262 2263 NAME FSTYPE SIZE MOUNTPOINT UUID 2264 mmcblk0 59.5G 2265 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 2266 zram1 50M /var/log 2267 zram2 0B 2268 2269 ### zramctl: 2270 2271 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 2272 /dev/zram1 lz4 50M 4.8M 1.4M 1.8M 4 /var/log 2273 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 2274 2275 ### mtab: 2276 2277 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 2278 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 2279 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 2280 2281 ### mmc0:0001 info: 2282 2283 manfid: 0x0000fe 2284 cid: fe3432534431364720000000690091f5 2285 fwrev: 0x0 2286 csd: 400e00325b590001dc277f800a40008b 2287 ocr: 0x00200000 2288 type: SD 2289 date: 01/2009 2290 hwrev: 0x2 2291 dsr: 0x404 2292 serial: 0x00000069 2293 erase_size: 512 2294 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 2295 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 2296 scr: 0285808300000000 2297 oemid: 0x3432 2298 preferred_erase_size: 4194304 2299 name: SD16G 2300 2301 ### Boot system health: 2302 2303 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 2304 11:53:09 1512 MHz 1.25 39% 19% 13% 0% 7% 0% 48.2 °C 0/5 2305 11:53:10 1512 MHz 1.25 97% 21% 45% 2% 28% 0% 48.2 °C 0/5 2306 11:53:10 1512 MHz 1.25 100% 29% 50% 0% 19% 0% 48.9 °C 0/5 2307 11:53:11 1512 MHz 1.25 96% 20% 23% 0% 50% 0% 48.9 °C 0/5 2308 11:53:11 1512 MHz 1.25 99% 27% 40% 1% 30% 0% 48.9 °C 0/5 2309 2310 ### Activated 1 lzo zram swap devices with 482MB each. 2311 ### Activated Armbian ramlog partition with lz4 compression 2312 2313 Mon Sep 25 12:17:53 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 2314 2315 ### dmesg: 2316 2317 [ 0.000000] Booting Linux on physical CPU 0x0 2318 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 2319 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 2320 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 2321 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 2322 [ 0.000000] On node 0 totalpages: 262144 2323 [ 0.000000] DMA zone: 4096 pages used for memmap 2324 [ 0.000000] DMA zone: 0 pages reserved 2325 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 2326 [ 0.000000] psci: probing for conduit method from DT. 2327 [ 0.000000] psci: PSCIv1.0 detected in firmware. 2328 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 2329 [ 0.000000] psci: Trusted OS migration not required 2330 [ 0.000000] psci: SMC Calling Convention v1.0 2331 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 2332 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 2333 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 2334 [ 0.000000] Detected VIPT I-cache on CPU0 2335 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 2336 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 2337 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 2338 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 2339 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 2340 [ 0.000000] log_buf_len min size: 131072 bytes 2341 [ 0.000000] log_buf_len: 524288 bytes 2342 [ 0.000000] early log buf free: 129352(98%) 2343 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 2344 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 2345 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 2346 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 2347 [ 0.000000] Virtual kernel memory layout: 2348 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 2349 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 2350 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 2351 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 2352 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 2353 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 2354 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 2355 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 2356 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 2357 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 2358 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 2359 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 2360 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 2361 [ 0.000000] Preemptible hierarchical RCU implementation. 2362 [ 0.000000] Build-time adjustment of leaf fanout to 64. 2363 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 2364 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 2365 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 2366 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 2367 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 2368 [ 0.000211] Console: colour dummy device 80x25 2369 [ 0.000227] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 2370 [ 0.000235] pid_max: default: 32768 minimum: 301 2371 [ 0.000433] Security Framework initialized 2372 [ 0.000442] AppArmor: AppArmor disabled by boot time parameter 2373 [ 0.000560] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 2374 [ 0.000567] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 2375 [ 0.001839] sched-energy: CPU device node has no sched-energy-costs 2376 [ 0.001854] Invalid sched_group_energy for CPU0 2377 [ 0.001861] CPU0: update cpu_capacity 1024 2378 [ 0.008953] ASID allocator initialised with 32768 entries 2379 [ 0.027923] BOOTEVENT: 27.909457: ON 2380 [ 0.055902] Detected VIPT I-cache on CPU1 2381 [ 0.055955] Invalid sched_group_energy for CPU1 2382 [ 0.055959] CPU1: update cpu_capacity 1024 2383 [ 0.055962] CPU1: Booted secondary processor [410fd034] 2384 [ 0.079289] Detected VIPT I-cache on CPU2 2385 [ 0.079327] Invalid sched_group_energy for CPU2 2386 [ 0.079330] CPU2: update cpu_capacity 1024 2387 [ 0.079333] CPU2: Booted secondary processor [410fd034] 2388 [ 0.102692] Detected VIPT I-cache on CPU3 2389 [ 0.102726] Invalid sched_group_energy for CPU3 2390 [ 0.102729] CPU3: update cpu_capacity 1024 2391 [ 0.102732] CPU3: Booted secondary processor [410fd034] 2392 [ 0.102813] Brought up 4 CPUs 2393 [ 0.102820] SMP: Total of 4 processors activated. 2394 [ 0.102829] CPU features: detected feature: 32-bit EL0 Support 2395 [ 0.102835] CPU features: detected feature: Kernel page table isolation (KPTI) 2396 [ 0.106595] CPU: All CPU(s) started at EL1 2397 [ 0.106617] alternatives: patching kernel code 2398 [ 0.106790] Invalid sched_group_energy for CPU3 2399 [ 0.106800] CPU3: update max cpu_capacity 1024 2400 [ 0.106806] Invalid sched_group_energy for Cluster3 2401 [ 0.106811] Invalid sched_group_energy for CPU2 2402 [ 0.106816] Invalid sched_group_energy for Cluster2 2403 [ 0.106821] Invalid sched_group_energy for CPU1 2404 [ 0.106827] Invalid sched_group_energy for Cluster1 2405 [ 0.106831] Invalid sched_group_energy for CPU0 2406 [ 0.106837] Invalid sched_group_energy for Cluster0 2407 [ 0.108257] devtmpfs: initialized 2408 [ 0.112702] CPU1: update max cpu_capacity 1024 2409 [ 0.143397] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 2410 [ 0.143418] futex hash table entries: 1024 (order: 5, 131072 bytes) 2411 [ 0.144078] xor: measuring software checksum speed 2412 [ 0.176236] 8regs : 1933.200 MB/sec 2413 [ 0.209615] 8regs_prefetch: 1720.800 MB/sec 2414 [ 0.243003] 32regs : 2287.200 MB/sec 2415 [ 0.276391] 32regs_prefetch: 1935.600 MB/sec 2416 [ 0.276396] xor: using function: 32regs (2287.200 MB/sec) 2417 [ 0.276457] atomic64_test: passed 2418 [ 0.276463] pinctrl core: initialized pinctrl subsystem 2419 [ 0.277631] NET: Registered protocol family 16 2420 [ 0.278774] dump_class_init,861, success 2421 [ 0.293110] cpuidle: using governor menu 2422 [ 0.294521] sunxi iommu: irq = 8 2423 [ 0.294837] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 2424 [ 0.294855] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 2425 [ 0.296242] DMA: preallocated 256 KiB pool for atomic allocations 2426 [ 0.297632] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 2427 [ 0.311994] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 2428 [ 0.316021] iommu: Adding device 1c0e000.ve to group 0 2429 [ 0.316543] iommu: Adding device 1c00000.vp9 to group 0 2430 [ 0.328258] iommu: Adding device 1000000.disp to group 0 2431 [ 0.329710] iommu: Adding device 1480000.g2d to group 0 2432 [ 0.332989] iommu: Adding device csi0 to group 0 2433 [ 0.333518] iommu: Adding device csi1 to group 0 2434 [ 0.334714] iommu: Adding device 6600800.vind:scaler@0 to group 0 2435 [ 0.335018] iommu: Adding device 6600800.vind:scaler@1 to group 0 2436 [ 0.335334] iommu: Adding device 6600800.vind:scaler@2 to group 0 2437 [ 0.335638] iommu: Adding device 6600800.vind:scaler@3 to group 0 2438 [ 0.335948] iommu: Adding device 6600800.vind:scaler@4 to group 0 2439 [ 0.336250] iommu: Adding device 6600800.vind:scaler@5 to group 0 2440 [ 0.337321] iommu: Adding device vinc0 to group 0 2441 [ 0.337809] iommu: Adding device vinc1 to group 0 2442 [ 0.339300] iommu: Adding device 1420000.deinterlace to group 0 2443 [ 0.381178] HugeTLB registered 2 MB page size, pre-allocated 0 pages 2444 [ 0.437369] raid6: int64x1 gen() 391 MB/s 2445 [ 0.494025] raid6: int64x1 xor() 362 MB/s 2446 [ 0.550749] raid6: int64x2 gen() 590 MB/s 2447 [ 0.607545] raid6: int64x2 xor() 512 MB/s 2448 [ 0.664291] raid6: int64x4 gen() 840 MB/s 2449 [ 0.721006] raid6: int64x4 xor() 629 MB/s 2450 [ 0.777779] raid6: int64x8 gen() 964 MB/s 2451 [ 0.834480] raid6: int64x8 xor() 655 MB/s 2452 [ 0.891289] raid6: neonx1 gen() 648 MB/s 2453 [ 0.947984] raid6: neonx1 xor() 641 MB/s 2454 [ 1.004732] raid6: neonx2 gen() 976 MB/s 2455 [ 1.061457] raid6: neonx2 xor() 819 MB/s 2456 [ 1.118189] raid6: neonx4 gen() 1286 MB/s 2457 [ 1.174947] raid6: neonx4 xor() 965 MB/s 2458 [ 1.231666] raid6: neonx8 gen() 1323 MB/s 2459 [ 1.288431] raid6: neonx8 xor() 984 MB/s 2460 [ 1.288437] raid6: using algorithm neonx8 gen() 1323 MB/s 2461 [ 1.288442] raid6: .... xor() 984 MB/s, rmw enabled 2462 [ 1.288447] raid6: using intx1 recovery algorithm 2463 [ 1.288624] pwm module init! 2464 [ 1.292929] sunxi-pm debug v3.10 2465 [ 1.294013] SCSI subsystem initialized 2466 [ 1.294627] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 2467 [ 1.294705] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 2468 [ 1.294822] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 2469 [ 1.295322] spi spi0: master is unqueued, this is deprecated 2470 [ 1.295630] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 2471 [ 1.296201] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 2472 [ 1.296283] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 2473 [ 1.296400] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 2474 [ 1.296844] spi spi1: master is unqueued, this is deprecated 2475 [ 1.297148] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 2476 [ 1.297931] usbcore: registered new interface driver usbfs 2477 [ 1.298022] usbcore: registered new interface driver hub 2478 [ 1.298095] usbcore: registered new device driver usb 2479 [ 1.298376] sunxi_i2c_adap_init()2522 - init 2480 [ 1.298937] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 2481 [ 1.299028] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 2482 [ 1.299036] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 2483 [ 1.299051] twi3 supply twi not found, using dummy regulator 2484 [ 1.299127] twi_request_gpio()451 - [i2c3] init name: twi3 2485 [ 1.299888] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 2486 [ 1.299967] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 2487 [ 1.299974] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 2488 [ 1.299990] twi5 supply twi not found, using dummy regulator 2489 [ 1.300065] twi_request_gpio()451 - [i2c5] init name: twi5 2490 [ 1.300552] axp20x-i2c 5-0036: AXP20x variant AXP806 found 2491 [ 1.319041] random: fast init done 2492 [ 1.330217] axp20x-i2c 5-0036: AXP20X driver loaded 2493 [ 1.330704] media: Linux media interface: v0.10 2494 [ 1.330790] Linux video capture interface: v2.00 2495 [ 1.331581] Advanced Linux Sound Architecture Driver Initialized. 2496 [ 1.332328] Bluetooth: Core ver 2.22 2497 [ 1.332427] NET: Registered protocol family 31 2498 [ 1.332433] Bluetooth: HCI device and connection manager initialized 2499 [ 1.332451] Bluetooth: HCI socket layer initialized 2500 [ 1.332463] Bluetooth: L2CAP socket layer initialized 2501 [ 1.332502] Bluetooth: SCO socket layer initialized 2502 [ 1.338283] [DISP]disp_module_init 2503 [ 1.339468] [DISP] parser_disp_init_para,line:1403: 2504 [ 1.339477] of_property_read fb0_width fail 2505 [ 1.339488] [DISP] disp_init,line:2215: 2506 [ 1.339494] smooth display screen:0 type:4 mode:10 2507 [ 1.356890] [DISP]disp_module_init finish 2508 [ 1.357753] clocksource: Switched to clocksource arch_sys_counter 2509 [ 1.357992] VFS: Disk quotas dquot_6.6.0 2510 [ 1.358136] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 2511 [ 1.358889] Console: switching to colour frame buffer device 240x67 2512 [ 1.402311] NET: Registered protocol family 2 2513 [ 1.402441] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 2514 [ 1.414671] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 2515 [ 1.414744] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 2516 [ 1.414866] TCP: Hash tables configured (established 8192 bind 8192) 2517 [ 1.414952] UDP hash table entries: 512 (order: 2, 16384 bytes) 2518 [ 1.414982] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 2519 [ 1.415288] NET: Registered protocol family 1 2520 [ 1.415831] RPC: Registered named UNIX socket transport module. 2521 [ 1.415836] RPC: Registered udp transport module. 2522 [ 1.415839] RPC: Registered tcp transport module. 2523 [ 1.415842] RPC: Registered tcp NFSv4.1 backchannel transport module. 2524 [ 1.416090] Trying to unpack rootfs image as initramfs... 2525 [ 2.170062] Freeing initrd memory: 17256K 2526 [ 2.171184] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 2527 [ 2.175097] audit: initializing netlink subsys (disabled) 2528 [ 2.175153] audit: type=2000 audit(2.170:1): initialized 2529 [ 2.176062] workingset: timestamp_bits=45 max_order=18 bucket_order=0 2530 [ 2.187177] DLM installed 2531 [ 2.189044] squashfs: version 4.0 (2009/01/31) Phillip Lougher 2532 [ 2.189384] Registering sdcardfs 0.1 2533 [ 2.189856] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 2534 [ 2.191393] ntfs: driver 2.1.32 [Flags: R/W]. 2535 [ 2.197821] NET: Registered protocol family 38 2536 [ 2.198201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 2537 [ 2.198330] io scheduler noop registered 2538 [ 2.198338] io scheduler deadline registered 2539 [ 2.198506] io scheduler cfq registered (default) 2540 [ 2.200317] failed to get easy_light_used assign 2541 [ 2.200328] failed to get normal led pin assign 2542 [ 2.200333] failed to get standby led pin assign 2543 [ 2.200338] failed to get standby led pin assign 2544 [ 2.200343] these is zero number for gpio 2545 [ 2.200347] gpio_init finish with uesd 2546 [ 2.203754] uart uart0: get regulator failed 2547 [ 2.203954] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 2548 [ 2.203975] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 2549 [ 2.204067] console [ttyS0] enabled 2550 [ 2.204950] uart uart1: get regulator failed 2551 [ 2.205145] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 2552 [ 2.205881] uart uart5: get regulator failed 2553 [ 2.206067] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 2554 [ 2.207328] misc dump reg init 2555 [ 2.208772] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 2556 [ 2.209114] Unable to detect cache hierarchy for CPU 0 2557 [ 2.223698] brd: module loaded 2558 [ 2.231879] loop: module loaded 2559 [ 2.232069] [NAND][NE] Not found valid nand node on dts 2560 [ 2.232664] Get boot type cmd line fail 2561 [ 2.233251] sunxi-bt soc@03000000:bt: Missing bt_power. 2562 [ 2.233261] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 2563 [ 2.233268] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 2564 [ 2.233275] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 2565 [ 2.233333] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 2566 [ 2.233404] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 2567 [ 2.234235] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 2568 [ 2.234247] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 2569 [ 2.234255] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 2570 [ 2.234262] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 2571 [ 2.234269] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 2572 [ 2.234300] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 2573 [ 2.234341] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 2574 [ 2.234349] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 2575 [ 2.234367] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 2576 [ 2.235492] [ADDR_MGT] addr_mgt_probe: success. 2577 [ 2.242110] tun: Universal TUN/TAP device driver, 1.6 2578 [ 2.242120] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 2579 [ 2.244105] gmac-power0: NULL 2580 [ 2.244115] gmac-power1: NULL 2581 [ 2.244121] gmac-power2: NULL 2582 [ 2.245221] PPP generic driver version 2.4.2 2583 [ 2.245504] PPP BSD Compression module registered 2584 [ 2.245515] PPP Deflate Compression module registered 2585 [ 2.245540] PPP MPPE Compression module registered 2586 [ 2.245550] NET: Registered protocol family 24 2587 [ 2.245582] PPTP driver version 0.8.5 2588 [ 2.245943] usbcore: registered new interface driver r8152 2589 [ 2.246022] usbcore: registered new interface driver asix 2590 [ 2.246115] usbcore: registered new interface driver ax88179_178a 2591 [ 2.246187] usbcore: registered new interface driver cdc_ether 2592 [ 2.246250] usbcore: registered new interface driver net1080 2593 [ 2.246314] usbcore: registered new interface driver cdc_subset 2594 [ 2.246385] usbcore: registered new interface driver zaurus 2595 [ 2.246477] usbcore: registered new interface driver cdc_ncm 2596 [ 2.246484] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 2597 [ 2.246843] get drv_vbus is fail, 84 2598 [ 2.246852] get ehci0-controller, regulator_io is no nocare 2599 [ 2.247115] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 2600 [ 2.247121] [sunxi-ehci0]: Not init ehci0 2601 [ 2.247248] get ehci1-controller, regulator_io is no nocare 2602 [ 2.247431] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 2603 [ 2.247488] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2604 [ 2.247515] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 2605 [ 2.248121] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 2606 [ 2.261108] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 2607 [ 2.261394] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 2608 [ 2.261403] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2609 [ 2.261411] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2610 [ 2.261418] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 2611 [ 2.261425] usb usb1: SerialNumber: sunxi-ehci 2612 [ 2.262279] hub 1-0:1.0: USB hub found 2613 [ 2.262325] hub 1-0:1.0: 1 port detected 2614 [ 2.263019] get drv_vbus is fail, 84 2615 [ 2.263027] get ehci2-controller, regulator_io is no nocare 2616 [ 2.263264] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 2617 [ 2.263314] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2618 [ 2.263339] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 2619 [ 2.263631] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 2620 [ 2.274444] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 2621 [ 2.274652] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 2622 [ 2.274661] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2623 [ 2.274668] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2624 [ 2.274675] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 2625 [ 2.274682] usb usb2: SerialNumber: sunxi-ehci 2626 [ 2.275540] hub 2-0:1.0: USB hub found 2627 [ 2.275583] hub 2-0:1.0: 1 port detected 2628 [ 2.276255] get drv_vbus is fail, 84 2629 [ 2.276263] get ehci3-controller, regulator_io is no nocare 2630 [ 2.276507] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 2631 [ 2.276558] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2632 [ 2.276586] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 2633 [ 2.276883] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 2634 [ 2.287763] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 2635 [ 2.287950] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 2636 [ 2.287959] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2637 [ 2.287966] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2638 [ 2.287974] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 2639 [ 2.287980] usb usb3: SerialNumber: sunxi-ehci 2640 [ 2.288840] hub 3-0:1.0: USB hub found 2641 [ 2.288883] hub 3-0:1.0: 1 port detected 2642 [ 2.289803] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 2643 [ 2.290200] get drv_vbus is fail, 84 2644 [ 2.290208] get ohci0-controller, regulator_io is no nocare 2645 [ 2.290541] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 2646 [ 2.290546] [sunxi-ohci0]: Not init ohci0 2647 [ 2.290664] get ohci1-controller, regulator_io is no nocare 2648 [ 2.290836] hci: request ohci1-controller gpio:80 2649 [ 2.290912] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 2650 [ 2.290964] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 2651 [ 2.290989] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 2652 [ 2.291111] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 2653 [ 2.351931] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 2654 [ 2.351941] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2655 [ 2.351948] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 2656 [ 2.351956] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 2657 [ 2.351963] usb usb4: SerialNumber: sunxi-ohci 2658 [ 2.352841] hub 4-0:1.0: USB hub found 2659 [ 2.352886] hub 4-0:1.0: 1 port detected 2660 [ 2.353559] get drv_vbus is fail, 84 2661 [ 2.353568] get ohci2-controller, regulator_io is no nocare 2662 [ 2.353898] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 2663 [ 2.353953] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 2664 [ 2.353978] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 2665 [ 2.354069] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 2666 [ 2.411931] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 2667 [ 2.411941] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2668 [ 2.411948] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 2669 [ 2.411956] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 2670 [ 2.411963] usb usb5: SerialNumber: sunxi-ohci 2671 [ 2.412833] hub 5-0:1.0: USB hub found 2672 [ 2.412878] hub 5-0:1.0: 1 port detected 2673 [ 2.413565] get drv_vbus is fail, 84 2674 [ 2.413573] get ohci3-controller, regulator_io is no nocare 2675 [ 2.413910] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 2676 [ 2.413960] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 2677 [ 2.413986] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 2678 [ 2.414065] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 2679 [ 2.471929] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 2680 [ 2.471939] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2681 [ 2.471947] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 2682 [ 2.471954] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 2683 [ 2.471961] usb usb6: SerialNumber: sunxi-ohci 2684 [ 2.472806] hub 6-0:1.0: USB hub found 2685 [ 2.472849] hub 6-0:1.0: 1 port detected 2686 [ 2.473771] ohci-platform: OHCI generic platform driver 2687 [ 2.474527] usbcore: registered new interface driver uas 2688 [ 2.474694] usbcore: registered new interface driver usb-storage 2689 [ 2.474789] usbcore: registered new interface driver ums-alauda 2690 [ 2.474870] usbcore: registered new interface driver ums-cypress 2691 [ 2.474939] usbcore: registered new interface driver ums-datafab 2692 [ 2.475007] usbcore: registered new interface driver ums_eneub6250 2693 [ 2.475076] usbcore: registered new interface driver ums-freecom 2694 [ 2.475158] usbcore: registered new interface driver ums-isd200 2695 [ 2.475234] usbcore: registered new interface driver ums-jumpshot 2696 [ 2.475307] usbcore: registered new interface driver ums-karma 2697 [ 2.475380] usbcore: registered new interface driver ums-onetouch 2698 [ 2.475481] usbcore: registered new interface driver ums-realtek 2699 [ 2.475559] usbcore: registered new interface driver ums-sddr09 2700 [ 2.475631] usbcore: registered new interface driver ums-sddr55 2701 [ 2.475702] usbcore: registered new interface driver ums-usbat 2702 [ 2.475853] usb_serial_number:20080411 2703 [ 2.477083] input: sunxi-keyboard as /devices/virtual/input/input0 2704 [ 2.477700] usbcore: registered new interface driver xpad 2705 [ 2.477853] usbcore: registered new interface driver usb_acecad 2706 [ 2.477944] usbcore: registered new interface driver aiptek 2707 [ 2.478024] usbcore: registered new interface driver gtco 2708 [ 2.478124] usbcore: registered new interface driver hanwang 2709 [ 2.478201] usbcore: registered new interface driver kbtab 2710 [ 2.478668] axp2101_pek: axp2101-pek can not register without irq 2711 [ 2.478691] axp2101-pek: probe of axp2101-pek.0 failed with error -22 2712 [ 2.480181] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 2713 [ 2.480245] sunxi-rtc rtc: RTC enabled 2714 [ 2.480724] i2c /dev entries driver 2715 [ 2.481555] lirc_dev: IR Remote Control driver registered, major 244 2716 [ 2.481567] IR NEC protocol handler initialized 2717 [ 2.481573] IR RC5(x/sz) protocol handler initialized 2718 [ 2.481579] IR RC6 protocol handler initialized 2719 [ 2.481585] IR JVC protocol handler initialized 2720 [ 2.481590] IR Sony protocol handler initialized 2721 [ 2.481596] IR SANYO protocol handler initialized 2722 [ 2.481602] IR Sharp protocol handler initialized 2723 [ 2.481608] IR MCE Keyboard/mouse protocol handler initialized 2724 [ 2.481614] IR LIRC bridge handler initialized 2725 [ 2.481619] IR XMP protocol handler initialized 2726 [ 2.482153] sunxi_ir_startup: get ir protocol failed 2727 [ 2.482194] 7040000.s_cir supply ir0 not found, using dummy regulator 2728 [ 2.482379] Registered IR keymap rc_map_sunxi 2729 [ 2.482775] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 2730 [ 2.483007] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 2731 [ 2.483989] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 2732 [ 2.484611] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 2733 [ 2.485311] sunxi cedar version 0.1 2734 [ 2.485516] VE: install start!!! 2735 2736 [ 2.485702] cedar_ve: cedar-ve the get irq is 278 2737 [ 2.486319] VE: get debugfs_mpp_root is NULL, please check mpp 2738 2739 [ 2.486334] VE: sunxi ve debug register driver failed! 2740 2741 [ 2.489573] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 2742 [ 2.490885] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 2743 [ 2.491279] Bluetooth: HCI UART driver ver 2.3 2744 [ 2.491291] Bluetooth: HCI UART protocol H4 registered 2745 [ 2.491297] Bluetooth: HCI UART protocol LL registered 2746 [ 2.491302] Bluetooth: HCI UART protocol Three-wire (H5) registered 2747 [ 2.495501] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 2748 [ 2.495517] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 2749 [ 2.495530] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 2750 [ 2.495542] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 2751 [ 2.495555] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 2752 [ 2.495572] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 2753 [ 2.495970] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 2754 [ 2.496084] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 2755 [ 2.496282] sunxi-mmc sdc0: No vmmc regulator found 2756 [ 2.496289] sunxi-mmc sdc0: No vqmmc regulator found 2757 [ 2.496295] sunxi-mmc sdc0: No vdmmc regulator found 2758 [ 2.496301] sunxi-mmc sdc0: No vd33sw regulator found 2759 [ 2.496308] sunxi-mmc sdc0: No vd18sw regulator found 2760 [ 2.496314] sunxi-mmc sdc0: No vq33sw regulator found 2761 [ 2.496320] sunxi-mmc sdc0: No vq18sw regulator found 2762 [ 2.497017] sunxi-mmc sdc0: set host busy 2763 [ 2.497119] sunxi-mmc sdc0: Got CD GPIO 2764 [ 2.497501] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 2765 [ 2.497535] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 2766 [ 2.511099] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2767 [ 2.528131] sunxi-mmc sdc0: detmode:gpio irq 2768 [ 2.528165] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2769 [ 2.530678] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2770 [ 2.532042] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 2771 [ 2.532176] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 2772 [ 2.532317] sunxi-mmc sdc1: No vmmc regulator found 2773 [ 2.532324] sunxi-mmc sdc1: No vqmmc regulator found 2774 [ 2.532330] sunxi-mmc sdc1: No vdmmc regulator found 2775 [ 2.532336] sunxi-mmc sdc1: No vd33sw regulator found 2776 [ 2.532342] sunxi-mmc sdc1: No vd18sw regulator found 2777 [ 2.532349] sunxi-mmc sdc1: No vq33sw regulator found 2778 [ 2.532355] sunxi-mmc sdc1: No vq18sw regulator found 2779 [ 2.532736] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2780 [ 2.533061] sunxi-mmc sdc1: set host busy 2781 [ 2.533143] mmc:failed to get gpios 2782 [ 2.533427] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 2783 [ 2.535221] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2784 [ 2.547830] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2785 [ 2.558892] mmc0: host does not support reading read-only switch, assuming write-enable 2786 [ 2.560754] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 2787 [ 2.560830] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 2788 [ 2.560973] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 2789 [ 2.561064] mmc0: new high speed SDXC card at address 0001 2790 [ 2.562158] mmcblk0: mmc0:0001 SD16G 59.5 GiB 2791 [ 2.563656] mmcblk0: p1 2792 [ 2.564494] sunxi-mmc sdc1: detmode:manually by software 2793 [ 2.566675] ledtrig-cpu: registered to indicate activity on CPUs 2794 [ 2.567419] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 2795 [ 2.568269] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 2796 [ 2.568310] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2797 [ 2.570817] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2798 [ 2.572739] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 2799 [ 2.573579] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 2800 [ 2.574441] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 2801 [ 2.574713] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 2802 [ 2.574720] sunxi_emce_probe()590emce hw init failed! 2803 [ 2.574746] emce: probe of emce failed with error -2 2804 [ 2.575045] hidraw: raw HID events driver (C) Jiri Kosina 2805 [ 2.575289] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 2806 [ 2.575327] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 2807 [ 2.580189] usbcore: registered new interface driver usbhid 2808 [ 2.580198] usbhid: USB HID core driver 2809 [ 2.581715] optee: probing for conduit method from DT. 2810 [ 2.581728] optee: api uid mismatch 2811 [ 2.582253] usbcore: registered new interface driver snd-usb-audio 2812 [ 2.583847] [sunxi_hdmi_codec_init] driver and deivce register finished. 2813 [ 2.585637] [sunxi_internal_codec_probe]:get audio avcc failed 2814 [ 2.585677] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 2815 [ 2.585942] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 2816 [ 2.588500] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 2817 [ 2.590538] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 2818 [ 2.590551] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 2819 [ 2.592790] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 2820 [ 2.592813] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 2821 [ 2.596752] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 2822 [ 2.598160] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 2823 [ 2.600018] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 2824 [ 2.603083] pktgen: Packet Generator for packet performance testing. Version: 2.75 2825 [ 2.603504] u32 classifier 2826 [ 2.603511] Actions configured 2827 [ 2.603523] Netfilter messages via NETLINK v0.30. 2828 [ 2.603549] nfnl_acct: registering with nfnetlink. 2829 [ 2.603885] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 2830 [ 2.604138] ctnetlink v0.93: registering with nfnetlink. 2831 [ 2.604987] xt_time: kernel timezone is -0000 2832 [ 2.605012] IPVS: Registered protocols (TCP, UDP) 2833 [ 2.605123] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 2834 [ 2.605253] IPVS: Creating netns size=1928 id=0 2835 [ 2.605383] IPVS: ipvs loaded. 2836 [ 2.605391] IPVS: [rr] scheduler registered. 2837 [ 2.605488] ipip: IPv4 and MPLS over IPv4 tunneling driver 2838 [ 2.606202] gre: GRE over IPv4 demultiplexor driver 2839 [ 2.606212] ip_gre: GRE over IPv4 tunneling driver 2840 [ 2.607545] IPv4 over IPsec tunneling driver 2841 [ 2.608494] ip_tables: (C) 2000-2006 Netfilter Core Team 2842 [ 2.608770] arp_tables: arp_tables: (C) 2002 David S. Miller 2843 [ 2.608838] Initializing XFRM netlink socket 2844 [ 2.608870] IPsec XFRM device driver 2845 [ 2.609700] NET: Registered protocol family 10 2846 [ 2.611853] mip6: Mobile IPv6 2847 [ 2.611892] ip6_tables: (C) 2000-2006 Netfilter Core Team 2848 [ 2.613162] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 2849 [ 2.615363] NET: Registered protocol family 17 2850 [ 2.615406] NET: Registered protocol family 15 2851 [ 2.615566] Bridge firewalling registered 2852 [ 2.615697] Bluetooth: RFCOMM TTY layer initialized 2853 [ 2.615713] Bluetooth: RFCOMM socket layer initialized 2854 [ 2.615745] Bluetooth: RFCOMM ver 1.11 2855 [ 2.615759] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 2856 [ 2.615764] Bluetooth: BNEP filters: protocol multicast 2857 [ 2.615778] Bluetooth: BNEP socket layer initialized 2858 [ 2.615784] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 2859 [ 2.615797] Bluetooth: HIDP socket layer initialized 2860 [ 2.615884] l2tp_core: L2TP core driver, V2.0 2861 [ 2.615900] l2tp_ppp: PPPoL2TP kernel driver, V2.0 2862 [ 2.615906] 8021q: 802.1Q VLAN Support v1.8 2863 [ 2.616104] sctp: Hash tables configured (bind 256/256) 2864 [ 2.616687] Key type dns_resolver registered 2865 [ 2.616828] Registered cp15_barrier emulation handler 2866 [ 2.616841] Registered setend emulation handler 2867 [ 2.617802] registered taskstats version 1 2868 [ 2.629196] zswap: default zpool zbud not available 2869 [ 2.629204] zswap: pool creation failed 2870 [ 2.632039] Btrfs loaded, crc32c=crc32c-arm64-hw 2871 [ 2.632775] HDMI 2.0 driver init start! 2872 [ 2.632791] boot_hdmi=true 2873 [ 2.633610] Can not find the node of esm 2874 [ 2.633629] ERROR: pinctrl_get for HDMI2.0 DDC fail 2875 [ 2.633715] Get hdmi_power0:vcc-hdmi 2876 [ 2.633754] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 2877 [ 2.633931] Get hdmi_power1:vdd-hdmi 2878 [ 2.633956] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 2879 [ 2.635580] hdmi_cec_init 2880 [ 2.636048] [DISP] disp_device_attached,line:146: 2881 [ 2.636057] attached ok, mgr0<-->device0, type=4 2882 [ 2.636067] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 2883 [ 2.636080] [DISP] disp_hdmi_set_mode,line:648: 2884 [ 2.636084] hdmi_set_mode is null! 2885 [ 2.638146] HDMI2.0 module init end 2886 [ 2.649346] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 2887 [ 2.652771] cpu cpu1: opp_list_debug_create_link: Failed to create link 2888 [ 2.652782] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 2889 [ 2.652814] cpu cpu2: opp_list_debug_create_link: Failed to create link 2890 [ 2.652822] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 2891 [ 2.652852] cpu cpu3: opp_list_debug_create_link: Failed to create link 2892 [ 2.652859] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 2893 [ 2.655207] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 2894 [ 2.656131] get det_vbus is fail, 84 2895 [ 2.656139] get id is fail, 84 2896 [ 2.656631] sunxi-rtc rtc: setting system clock to 2023-09-25 15:17:35 UTC (1695655055) 2897 [ 2.660427] ALSA device list: 2898 [ 2.660434] #0: audiocodec 2899 [ 2.660438] #1: sndahub 2900 [ 2.660441] #2: sndhdmi 2901 [ 2.662096] Freeing unused kernel memory: 3008K 2902 [ 2.708138] random: systemd-udevd: uninitialized urandom read (16 bytes read) 2903 [ 2.710072] random: systemd-udevd: uninitialized urandom read (16 bytes read) 2904 [ 2.713113] random: systemd-udevd: uninitialized urandom read (16 bytes read) 2905 [ 2.782119] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 2906 [ 2.944603] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 2907 [ 3.044494] HDMI cable is connected 2908 [ 3.294463] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 2909 [ 3.514909] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 2910 [ 3.514918] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2911 [ 3.514923] usb 4-1: Product: Rapoo 2.4G Wireless Device 2912 [ 3.514928] usb 4-1: Manufacturer: RAPOO 2913 [ 3.522735] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 2914 [ 3.523135] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 2915 [ 3.528604] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 2916 [ 3.585698] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 2917 [ 3.590146] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 2918 [ 3.646478] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 2919 [ 4.191576] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 2920 [ 5.116950] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 2921 [ 5.117505] cgroup: cgroup2: unknown option "nsdelegate" 2922 [ 5.137834] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 2923 [ 5.137866] systemd[1]: Detected architecture arm64. 2924 [ 5.139125] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 2925 [ 5.156504] systemd[1]: Hostname set to <opi>. 2926 [ 5.183760] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 2927 [ 6.640306] (sd-execut[1458]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 2928 [ 6.827825] 2929 insmod_device_driver 2930 2931 [ 6.828068] device_chose finished 124! 2932 [ 7.127061] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 2933 [ 7.365547] systemd[1]: Queued start job for default target graphical.target. 2934 [ 7.372711] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 2935 [ 7.374948] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 2936 [ 7.377204] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 2937 [ 7.378599] systemd[1]: Created slice user.slice - User and Session Slice. 2938 [ 7.379271] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 2939 [ 7.379830] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 2940 [ 7.380160] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 2941 [ 7.380639] systemd[1]: Reached target slices.target - Slice Units. 2942 [ 7.380944] systemd[1]: Reached target swap.target - Swaps. 2943 [ 7.381324] systemd[1]: Reached target time-set.target - System Time Set. 2944 [ 7.381840] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 2945 [ 7.398961] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 2946 [ 7.400065] systemd[1]: Listening on syslog.socket - Syslog Socket. 2947 [ 7.400994] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 2948 [ 7.401758] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 2949 [ 7.403353] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 2950 [ 7.404341] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 2951 [ 7.405470] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 2952 [ 7.407607] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 2953 [ 7.408607] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 2954 [ 7.412518] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 2955 [ 7.417120] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 2956 [ 7.422120] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 2957 [ 7.423287] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 2958 [ 7.424224] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 2959 [ 7.432188] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 2960 [ 7.437584] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 2961 [ 7.443303] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 2962 [ 7.449716] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 2963 [ 7.457266] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 2964 [ 7.465871] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 2965 [ 7.475426] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 2966 [ 7.488350] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 2967 [ 7.495482] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 2968 [ 7.496895] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 2969 [ 7.507167] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 2970 [ 7.513093] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 2971 [ 7.518779] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 2972 [ 7.523221] fuse init (API version 7.26) 2973 [ 7.530103] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 2974 [ 7.532552] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 2975 [ 7.534813] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 2976 [ 7.537693] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 2977 [ 7.541476] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 2978 [ 7.545846] systemd[1]: modprobe@configfs.service: Deactivated successfully. 2979 [ 7.547023] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 2980 [ 7.549690] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 2981 [ 7.550392] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 2982 [ 7.552720] systemd[1]: modprobe@drm.service: Deactivated successfully. 2983 [ 7.553388] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 2984 [ 7.562554] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 2985 [ 7.577023] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 2986 [ 7.578523] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 2987 [ 7.602460] systemd[1]: modprobe@fuse.service: Deactivated successfully. 2988 [ 7.624772] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 2989 [ 7.632528] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 2990 [ 7.633381] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 2991 [ 7.633393] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 2992 [ 7.633582] spidev spi1.1: Deleting spi1.1 2993 [ 7.634599] fbtft_device: GPIOS used by 'fb_st7735r': 2994 [ 7.634607] fbtft_device: 'reset' = GPIO73 2995 [ 7.634611] fbtft_device: 'dc' = GPIO70 2996 [ 7.634623] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 2997 [ 7.634629] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 2998 [ 7.638405] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 2999 [ 7.656012] systemd[1]: modprobe@loop.service: Deactivated successfully. 3000 [ 7.656785] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 3001 [ 7.659107] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 3002 [ 7.673950] WCN: marlin_init entry! 3003 [ 7.675259] WCN: marlin_parse_dt reset gpio=211 3004 [ 7.675269] WCN_ERR: gpio reset request err: 211 3005 [ 7.675274] WCN: wcn config bt wake host 3006 [ 7.675777] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 3007 [ 7.675923] WCN: wcn config wifi wake host 3008 [ 7.675946] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 3009 [ 7.679404] sdiohal:sdiohal_init ok 3010 [ 7.680423] WCN: marlin_probe ok! 3011 [ 7.689223] mtty_probe init device addr: 0xffffffc03b686f00 3012 [ 7.689416] -->rfkill_bluetooth_init 3013 [ 7.689618] <--rfkill_bluetooth_init 3014 [ 7.714683] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 3015 [ 7.720905] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 3016 [ 7.721982] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 3017 [ 7.732239] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 3018 [ 7.733223] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 3019 [ 7.741392] WCN: start_marlin [MARLIN_WIFI] 3020 [ 7.741412] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 3021 [ 7.741416] WCN: the first power on start 3022 [ 7.747227] systemd[1]: Starting systemd-sysusers.service - Create System Users... 3023 [ 7.768939] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 3024 [ 7.772395] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 3025 [ 7.802956] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 3026 [ 7.816492] systemd[1]: Finished systemd-sysusers.service - Create System Users. 3027 [ 7.845127] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 3028 [ 7.857896] WCN: marlin chip en pull up 3029 [ 7.884532] sdiohal:sdiohal_scan_card 3030 [ 7.884553] sunxi-wlan soc@03000000:wlan: bus_index: 1 3031 [ 7.884614] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 3032 [ 7.904468] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3033 [ 7.921956] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 3034 [ 7.922803] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 3035 [ 7.922920] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3036 [ 7.925453] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3037 [ 7.928540] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3038 [ 7.940265] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 3039 [ 7.942334] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 3040 [ 7.944519] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3041 [ 7.948376] systemd[1]: Mounting tmp.mount - /tmp... 3042 [ 7.957194] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 3043 [ 7.957973] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 3044 [ 7.958056] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 3045 [ 7.958670] mmc1: new ultra high speed SDR104 SDIO card at address 8800 3046 [ 7.959237] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 3047 [ 7.959428] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 3048 [ 7.959447] WCN: marlin_scan_finish! 3049 [ 7.959450] sdiohal:probe ok 3050 [ 7.959497] sdiohal:scan end! 3051 [ 7.959503] WCN: then marlin start to download 3052 [ 7.959525] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 3053 [ 7.980615] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 3054 [ 7.985643] systemd[1]: Mounted tmp.mount - /tmp. 3055 [ 7.988355] systemd[1]: Reached target local-fs.target - Local File Systems. 3056 [ 7.993461] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 3057 [ 7.998743] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 3058 [ 8.004337] systemd[1]: Starting console-setup.service - Set console font and keymap... 3059 [ 8.009607] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 3060 [ 8.020955] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 3061 [ 8.028067] systemd[1]: Starting ufw.service - Uncomplicated firewall... 3062 [ 8.031494] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 3063 [ 8.065241] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 3064 [ 8.077433] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 3065 [ 8.084326] systemd[1]: Finished console-setup.service - Set console font and keymap. 3066 [ 8.091032] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 3067 [ 8.097665] systemd[1]: Finished ufw.service - Uncomplicated firewall. 3068 [ 8.109390] WCN: combin_img 0 marlin_firmware_write finish and successful 3069 [ 8.109562] WCN: marlin_start_run read reset reg val:0x1 3070 [ 8.109566] WCN: after do marlin_start_run reset reg val:0x0 3071 [ 8.109773] WCN: s_marlin_bootup_time=8109768635 3072 [ 8.114785] WCN: clock mode: TSX 3073 [ 8.115021] WCN: marlin_write_cali_data sync init_state:0x1a0f50 3074 [ 8.141405] WCN: marlin_write_cali_data sync init_state:0x1a0f50 3075 [ 8.155222] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 3076 [ 8.157585] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 3077 [ 8.158802] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 3078 [ 8.162103] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 3079 [ 8.164954] systemd[1]: Received SIGRTMIN+20 from PID 1421 (plymouthd). 3080 [ 8.165457] systemd[1]: Reached target network-pre.target - Preparation for Network. 3081 [ 8.168116] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 3082 [ 8.168126] WCN: sdio_config bt_wake_host trigger:[high] 3083 [ 8.168129] WCN: sdio_config irq:[inband] 3084 [ 8.168132] WCN: sdio_config wl_wake_host trigger:[high] 3085 [ 8.168138] WCN: sdio_config wake_host_level_duration_time:[20ms] 3086 [ 8.168142] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 3087 [ 8.168148] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 3088 [ 8.168533] WCN: marlin_write_cali_data finish 3089 [ 8.168740] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 3090 [ 8.194691] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 3091 [ 8.212239] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 3092 [ 8.221342] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 3093 [ 8.247979] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 3094 [ 8.274697] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 3095 [ 8.301395] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 3096 [ 8.301405] WCN: marlin_bind_verify confuse data: 0x8badefa1b12bbe26aeffa8d1a5c07 3097 [ 8.301421] WCN: marlin_bind_verify verify data: 0xccd7f963c19581907680f88f2044f687 3098 [ 8.301957] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 3099 [ 8.328091] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 3100 [ 8.328099] sdiohal:sdiohal_runtime_get entry 3101 [ 8.328272] WCN: get_cp2_version entry! 3102 [ 8.330032] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 3103 [ 8.330069] WCN: switch_cp2_log - close entry! 3104 [ 8.331459] WCN: WCND at cmd read:OK 3105 [ 8.331968] WCN: then marlin download finished and run ok 3106 [ 8.331979] WCN: start_loopcheck 3107 [ 8.345667] WCN: get_board_ant_num [one_ant] 3108 [ 8.345678] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 3109 [ 8.406865] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 3110 [ 8.412188] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 3111 [ 8.422605] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 3112 [ 8.473090] zram: Added device: zram0 3113 [ 8.474165] zram: Added device: zram1 3114 [ 8.475510] zram: Added device: zram2 3115 [ 8.511484] zswap: can't enable, initialization failed 3116 [ 8.512812] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 3117 [ 8.521326] systemd[1]: Starting networking.service - Raise network interfaces... 3118 [ 8.560988] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 3119 [ 8.574225] zram0: detected capacity change from 0 to 506396672 3120 [ 8.576780] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 3121 [ 8.650334] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 3122 [ 8.663742] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 3123 [ 8.666032] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 3124 [ 8.667282] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 3125 [ 8.667702] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 3126 [ 9.139019] systemd[1]: Finished networking.service - Raise network interfaces. 3127 [ 9.974376] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 3128 [ 10.034288] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 3129 [ 10.270974] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 3130 [ 10.719968] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 3131 [ 10.731951] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 3132 [ 10.797388] sunxi-bt soc@03000000:bt: set block: 0 3133 [ 10.820915] bluetooth_set_power: start_block=0 3134 [ 10.820927] WCN: start_marlin [MARLIN_BLUETOOTH] 3135 [ 10.820936] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 3136 [ 10.820941] WCN: marlin have open, GNSS is closed 3137 [ 10.820947] bluetooth_set_power: end_block=0 3138 [ 10.843784] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 3139 [ 10.959171] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 3140 [ 10.959468] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 3141 [ 10.960277] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 3142 [ 10.966890] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 3143 [ 10.974768] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 3144 [ 10.983934] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 3145 [ 10.992794] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 3146 [ 10.997628] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 3147 [ 10.998777] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 3148 [ 11.003515] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 3149 [ 11.004860] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 3150 [ 11.009415] systemd[1]: modprobe@loop.service: Deactivated successfully. 3151 [ 11.010418] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 3152 [ 11.013885] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 3153 [ 11.014193] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 3154 [ 11.051694] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 3155 [ 11.052227] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 3156 [ 11.068227] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 3157 [ 11.070263] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 3158 [ 11.076378] systemd[1]: Starting brltty.service - Braille Device Support... 3159 [ 11.622057] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 3160 [ 11.766120] zram1: detected capacity change from 0 to 52428800 3161 [ 11.821739] systemd[1]: Started brltty.service - Braille Device Support. 3162 [ 11.840742] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 3163 [ 15.854019] systemd[1]: systemd-rfkill.service: Deactivated successfully. 3164 [ 15.869877] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 3165 [ 15.898811] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 3166 [ 15.959002] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 3167 [ 19.658844] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 3168 [ 19.665165] systemd[1]: Starting systemd-journald.service - Journal Service... 3169 [ 19.940069] systemd-journald[1922]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.2 (1658 of 2204 items, 1269760 file size, 765 bytes per hash table item), suggesting rotation. 3170 [ 19.940091] systemd-journald[1922]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 3171 [ 19.947202] systemd[1]: Started systemd-journald.service - Journal Service. 3172 [ 19.993653] systemd-journald[1922]: Received client request to flush runtime journal. 3173 [ 20.245138] IPVS: Creating netns size=1928 id=1 3174 3175 ### armbian-release: 3176 3177 # PLEASE DO NOT EDIT THIS FILE 3178 BOARD=orangepizero2 3179 BOARD_NAME="Orange Pi Zero2" 3180 BOARDFAMILY=sun50iw9 3181 BUILD_REPOSITORY_URL=https://github.com/armbian/build 3182 BUILD_REPOSITORY_COMMIT=ac829eb6 3183 LINUXFAMILY=sun50iw9 3184 ARCH=arm64 3185 IMAGE_TYPE=stable 3186 BOARD_TYPE=conf 3187 INITRD_ARCH=arm 3188 KERNEL_IMAGE_TYPE=Image 3189 FORCE_BOOTSCRIPT_UPDATE=yes 3190 VENDOR=Armbian 3191 BOOTSCRIPT_FORCE_UPDATE="yes" 3192 BOOTSCRIPT_DST="boot.cmd" 3193 VERSION=23.8.1 3194 REVISION=23.8.1 3195 BRANCH=legacy 3196 3197 ### boot environment: 3198 3199 verbosity=1 3200 console=serial 3201 #disp_mode=1080p60 3202 #fb0_width=1280 3203 #fb0_height=720 3204 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 3205 rootfstype=ext4 3206 overlays=spi-spidev 3207 param_spidev_spi_bus=1 3208 param_spidev_spi_cs=1 3209 extraargs=fbcon=map:1 3210 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 3211 3212 ### lsusb: 3213 3214 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 3215 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 3216 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 3217 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 3218 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 3219 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 3220 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 3221 3222 ### lscpu: 3223 3224 Architecture: aarch64 3225 CPU op-mode(s): 32-bit, 64-bit 3226 Byte Order: Little Endian 3227 CPU(s): 4 3228 On-line CPU(s) list: 0-3 3229 Vendor ID: ARM 3230 Model name: Cortex-A53 3231 Model: 4 3232 Thread(s) per core: 1 3233 Core(s) per cluster: 4 3234 Socket(s): - 3235 Cluster(s): 1 3236 Stepping: r0p4 3237 CPU(s) scaling MHz: 100% 3238 CPU max MHz: 1512.0000 3239 CPU min MHz: 480.0000 3240 BogoMIPS: 48.00 3241 Flags: fp asimd aes pmull sha1 sha2 crc32 3242 3243 ### cpuinfo: 3244 3245 processor : 0 3246 BogoMIPS : 48.00 3247 Features : fp asimd aes pmull sha1 sha2 crc32 3248 CPU implementer : 0x41 3249 CPU architecture: 8 3250 CPU variant : 0x0 3251 CPU part : 0xd03 3252 CPU revision : 4 3253 3254 processor : 1 3255 BogoMIPS : 48.00 3256 Features : fp asimd aes pmull sha1 sha2 crc32 3257 CPU implementer : 0x41 3258 CPU architecture: 8 3259 CPU variant : 0x0 3260 CPU part : 0xd03 3261 CPU revision : 4 3262 3263 processor : 2 3264 BogoMIPS : 48.00 3265 Features : fp asimd aes pmull sha1 sha2 crc32 3266 CPU implementer : 0x41 3267 CPU architecture: 8 3268 CPU variant : 0x0 3269 CPU part : 0xd03 3270 CPU revision : 4 3271 3272 processor : 3 3273 BogoMIPS : 48.00 3274 Features : fp asimd aes pmull sha1 sha2 crc32 3275 CPU implementer : 0x41 3276 CPU architecture: 8 3277 CPU variant : 0x0 3278 CPU part : 0xd03 3279 CPU revision : 4 3280 3281 3282 ### meminfo: 3283 3284 MemTotal: 989056 kB 3285 MemFree: 794528 kB 3286 MemAvailable: 885284 kB 3287 Buffers: 15604 kB 3288 Cached: 82092 kB 3289 SwapCached: 0 kB 3290 Active: 66392 kB 3291 Inactive: 53084 kB 3292 Active(anon): 21848 kB 3293 Inactive(anon): 656 kB 3294 Active(file): 44544 kB 3295 Inactive(file): 52428 kB 3296 Unevictable: 0 kB 3297 Mlocked: 0 kB 3298 SwapTotal: 494524 kB 3299 SwapFree: 494524 kB 3300 Dirty: 6072 kB 3301 Writeback: 0 kB 3302 AnonPages: 21644 kB 3303 Mapped: 24364 kB 3304 Shmem: 824 kB 3305 Slab: 33156 kB 3306 SReclaimable: 9216 kB 3307 SUnreclaim: 23940 kB 3308 KernelStack: 2560 kB 3309 PageTables: 1032 kB 3310 NFS_Unstable: 0 kB 3311 Bounce: 0 kB 3312 WritebackTmp: 0 kB 3313 CommitLimit: 989052 kB 3314 Committed_AS: 77888 kB 3315 VmallocTotal: 263061440 kB 3316 VmallocUsed: 0 kB 3317 VmallocChunk: 0 kB 3318 CmaTotal: 16384 kB 3319 CmaFree: 7468 kB 3320 HugePages_Total: 0 3321 HugePages_Free: 0 3322 HugePages_Rsvd: 0 3323 HugePages_Surp: 0 3324 Hugepagesize: 2048 kB 3325 3326 ### virtual memory: 3327 3328 vm.admin_reserve_kbytes = 8192 3329 vm.block_dump = 0 3330 vm.compact_unevictable_allowed = 1 3331 vm.dirty_background_bytes = 0 3332 vm.dirty_background_ratio = 10 3333 vm.dirty_bytes = 0 3334 vm.dirty_expire_centisecs = 3000 3335 vm.dirty_ratio = 20 3336 vm.dirtytime_expire_seconds = 43200 3337 vm.dirty_writeback_centisecs = 500 3338 vm.extfrag_threshold = 500 3339 vm.extra_free_kbytes = 0 3340 vm.hugepages_treat_as_movable = 0 3341 vm.hugetlb_shm_group = 0 3342 vm.laptop_mode = 0 3343 vm.legacy_va_layout = 0 3344 vm.lowmem_reserve_ratio = 256 32 3345 vm.max_map_count = 65530 3346 vm.min_free_kbytes = 3937 3347 vm.mmap_min_addr = 4096 3348 vm.mmap_rnd_bits = 18 3349 vm.mmap_rnd_compat_bits = 11 3350 vm.nr_hugepages = 0 3351 vm.nr_overcommit_hugepages = 0 3352 vm.nr_pdflush_threads = 0 3353 vm.oom_dump_tasks = 1 3354 vm.oom_kill_allocating_task = 0 3355 vm.overcommit_kbytes = 0 3356 vm.overcommit_memory = 0 3357 vm.overcommit_ratio = 50 3358 vm.page-cluster = 0 3359 vm.panic_on_oom = 0 3360 vm.percpu_pagelist_fraction = 0 3361 vm.stat_interval = 1 3362 vm.swappiness = 100 3363 vm.user_reserve_kbytes = 29999 3364 vm.vfs_cache_pressure = 100 3365 vm.watermark_scale_factor = 10 3366 3367 ### ip addr: 3368 3369 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 3370 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 3371 inet XXX.XXX.0.1/8 scope host lo 3372 valid_lft forever preferred_lft forever 3373 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 3374 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 3375 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 3376 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 3377 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 3378 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 3379 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 3380 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 3381 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 3382 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 3383 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 3384 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 3385 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 3386 link/tunnel6 :: brd :: 3387 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 3388 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 3389 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 3390 link/tunnel6 :: brd :: 3391 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 3392 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 3393 3394 ### partitions: 3395 3396 major minor #blocks name 3397 3398 179 0 62410752 mmcblk0 3399 179 1 61763584 mmcblk0p1 3400 253 0 494528 zram0 3401 253 1 51200 zram1 3402 3403 ### df: 3404 3405 udev 466M 0 466M 0% /dev 3406 tmpfs 97M 884K 96M 1% /run 3407 /dev/mmcblk0p1 58G 5.7G 52G 10% / 3408 tmpfs 483M 0 483M 0% /dev/shm 3409 tmpfs 5.0M 0 5.0M 0% /run/lock 3410 tmpfs 483M 4.0K 483M 1% /tmp 3411 /dev/zram1 47M 5.8M 38M 14% /var/log 3412 3413 ### lsblk: 3414 3415 NAME FSTYPE SIZE MOUNTPOINT UUID 3416 mmcblk0 59.5G 3417 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 3418 zram1 50M /var/log 3419 zram2 0B 3420 3421 ### zramctl: 3422 3423 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 3424 /dev/zram1 lz4 50M 5.6M 1.6M 2M 4 /var/log 3425 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 3426 3427 ### mtab: 3428 3429 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 3430 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 3431 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 3432 3433 ### mmc0:0001 info: 3434 3435 manfid: 0x0000fe 3436 cid: fe3432534431364720000000690091f5 3437 fwrev: 0x0 3438 csd: 400e00325b590001dc277f800a40008b 3439 ocr: 0x00200000 3440 type: SD 3441 date: 01/2009 3442 hwrev: 0x2 3443 dsr: 0x404 3444 serial: 0x00000069 3445 erase_size: 512 3446 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 3447 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 3448 scr: 0285808300000000 3449 oemid: 0x3432 3450 preferred_erase_size: 4194304 3451 name: SD16G 3452 3453 ### Boot system health: 3454 3455 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 3456 12:17:55 1512 MHz 1.17 39% 19% 13% 0% 6% 0% 50.2 °C 0/5 3457 12:17:55 1512 MHz 1.17 92% 22% 22% 2% 45% 0% 50.2 °C 0/5 3458 12:17:56 1512 MHz 1.17 99% 40% 53% 1% 3% 0% 50.2 °C 0/5 3459 12:17:56 1512 MHz 1.17 100% 33% 59% 1% 5% 0% 49.4 °C 0/5 3460 12:17:57 1512 MHz 1.17 92% 23% 28% 0% 38% 0% 49.4 °C 0/5 3461 3462 ### Activated 1 lzo zram swap devices with 482MB each. 3463 ### Activated Armbian ramlog partition with lz4 compression 3464 3465 ### Activated 1 lzo zram swap devices with 482MB each. 3466 ### Activated Armbian ramlog partition with lz4 compression 3467 3468 Mon Sep 25 02:17:34 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 3469 3470 ### dmesg: 3471 3472 [ 0.000000] Booting Linux on physical CPU 0x0 3473 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 3474 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 3475 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 3476 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 3477 [ 0.000000] On node 0 totalpages: 262144 3478 [ 0.000000] DMA zone: 4096 pages used for memmap 3479 [ 0.000000] DMA zone: 0 pages reserved 3480 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 3481 [ 0.000000] psci: probing for conduit method from DT. 3482 [ 0.000000] psci: PSCIv1.0 detected in firmware. 3483 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 3484 [ 0.000000] psci: Trusted OS migration not required 3485 [ 0.000000] psci: SMC Calling Convention v1.0 3486 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 3487 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 3488 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 3489 [ 0.000000] Detected VIPT I-cache on CPU0 3490 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 3491 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 3492 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 3493 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 3494 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 3495 [ 0.000000] log_buf_len min size: 131072 bytes 3496 [ 0.000000] log_buf_len: 524288 bytes 3497 [ 0.000000] early log buf free: 129352(98%) 3498 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 3499 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 3500 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 3501 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 3502 [ 0.000000] Virtual kernel memory layout: 3503 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 3504 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 3505 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 3506 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 3507 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 3508 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 3509 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 3510 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 3511 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 3512 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 3513 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 3514 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 3515 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 3516 [ 0.000000] Preemptible hierarchical RCU implementation. 3517 [ 0.000000] Build-time adjustment of leaf fanout to 64. 3518 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 3519 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 3520 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 3521 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 3522 [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 3523 [ 0.000223] Console: colour dummy device 80x25 3524 [ 0.000237] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 3525 [ 0.000245] pid_max: default: 32768 minimum: 301 3526 [ 0.000441] Security Framework initialized 3527 [ 0.000449] AppArmor: AppArmor disabled by boot time parameter 3528 [ 0.000563] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 3529 [ 0.000569] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 3530 [ 0.001849] sched-energy: CPU device node has no sched-energy-costs 3531 [ 0.001863] Invalid sched_group_energy for CPU0 3532 [ 0.001871] CPU0: update cpu_capacity 1024 3533 [ 0.008959] ASID allocator initialised with 32768 entries 3534 [ 0.027939] BOOTEVENT: 27.924665: ON 3535 [ 0.055908] Detected VIPT I-cache on CPU1 3536 [ 0.055961] Invalid sched_group_energy for CPU1 3537 [ 0.055964] CPU1: update cpu_capacity 1024 3538 [ 0.055967] CPU1: Booted secondary processor [410fd034] 3539 [ 0.079292] Detected VIPT I-cache on CPU2 3540 [ 0.079328] Invalid sched_group_energy for CPU2 3541 [ 0.079331] CPU2: update cpu_capacity 1024 3542 [ 0.079334] CPU2: Booted secondary processor [410fd034] 3543 [ 0.102694] Detected VIPT I-cache on CPU3 3544 [ 0.102727] Invalid sched_group_energy for CPU3 3545 [ 0.102731] CPU3: update cpu_capacity 1024 3546 [ 0.102733] CPU3: Booted secondary processor [410fd034] 3547 [ 0.102813] Brought up 4 CPUs 3548 [ 0.102821] SMP: Total of 4 processors activated. 3549 [ 0.102829] CPU features: detected feature: 32-bit EL0 Support 3550 [ 0.102835] CPU features: detected feature: Kernel page table isolation (KPTI) 3551 [ 0.106604] CPU: All CPU(s) started at EL1 3552 [ 0.106626] alternatives: patching kernel code 3553 [ 0.106803] Invalid sched_group_energy for CPU3 3554 [ 0.106813] CPU3: update max cpu_capacity 1024 3555 [ 0.106818] Invalid sched_group_energy for Cluster3 3556 [ 0.106823] Invalid sched_group_energy for CPU2 3557 [ 0.106829] Invalid sched_group_energy for Cluster2 3558 [ 0.106834] Invalid sched_group_energy for CPU1 3559 [ 0.106840] Invalid sched_group_energy for Cluster1 3560 [ 0.106845] Invalid sched_group_energy for CPU0 3561 [ 0.106850] Invalid sched_group_energy for Cluster0 3562 [ 0.108277] devtmpfs: initialized 3563 [ 0.112711] CPU1: update max cpu_capacity 1024 3564 [ 0.143411] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 3565 [ 0.143432] futex hash table entries: 1024 (order: 5, 131072 bytes) 3566 [ 0.144088] xor: measuring software checksum speed 3567 [ 0.176249] 8regs : 1933.200 MB/sec 3568 [ 0.209628] 8regs_prefetch: 1720.800 MB/sec 3569 [ 0.243016] 32regs : 2287.200 MB/sec 3570 [ 0.276403] 32regs_prefetch: 1935.600 MB/sec 3571 [ 0.276409] xor: using function: 32regs (2287.200 MB/sec) 3572 [ 0.276469] atomic64_test: passed 3573 [ 0.276476] pinctrl core: initialized pinctrl subsystem 3574 [ 0.277649] NET: Registered protocol family 16 3575 [ 0.278817] dump_class_init,861, success 3576 [ 0.293122] cpuidle: using governor menu 3577 [ 0.294524] sunxi iommu: irq = 8 3578 [ 0.294861] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 3579 [ 0.294879] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 3580 [ 0.296271] DMA: preallocated 256 KiB pool for atomic allocations 3581 [ 0.297666] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 3582 [ 0.312044] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 3583 [ 0.316075] iommu: Adding device 1c0e000.ve to group 0 3584 [ 0.316634] iommu: Adding device 1c00000.vp9 to group 0 3585 [ 0.328200] iommu: Adding device 1000000.disp to group 0 3586 [ 0.329618] iommu: Adding device 1480000.g2d to group 0 3587 [ 0.332832] iommu: Adding device csi0 to group 0 3588 [ 0.333308] iommu: Adding device csi1 to group 0 3589 [ 0.334535] iommu: Adding device 6600800.vind:scaler@0 to group 0 3590 [ 0.334833] iommu: Adding device 6600800.vind:scaler@1 to group 0 3591 [ 0.335141] iommu: Adding device 6600800.vind:scaler@2 to group 0 3592 [ 0.335436] iommu: Adding device 6600800.vind:scaler@3 to group 0 3593 [ 0.335725] iommu: Adding device 6600800.vind:scaler@4 to group 0 3594 [ 0.336009] iommu: Adding device 6600800.vind:scaler@5 to group 0 3595 [ 0.337039] iommu: Adding device vinc0 to group 0 3596 [ 0.337542] iommu: Adding device vinc1 to group 0 3597 [ 0.338994] iommu: Adding device 1420000.deinterlace to group 0 3598 [ 0.377854] HugeTLB registered 2 MB page size, pre-allocated 0 pages 3599 [ 0.433963] raid6: int64x1 gen() 391 MB/s 3600 [ 0.490701] raid6: int64x1 xor() 365 MB/s 3601 [ 0.547455] raid6: int64x2 gen() 591 MB/s 3602 [ 0.604205] raid6: int64x2 xor() 512 MB/s 3603 [ 0.660963] raid6: int64x4 gen() 840 MB/s 3604 [ 0.717685] raid6: int64x4 xor() 629 MB/s 3605 [ 0.774389] raid6: int64x8 gen() 964 MB/s 3606 [ 0.831166] raid6: int64x8 xor() 655 MB/s 3607 [ 0.887951] raid6: neonx1 gen() 648 MB/s 3608 [ 0.944646] raid6: neonx1 xor() 641 MB/s 3609 [ 1.001423] raid6: neonx2 gen() 976 MB/s 3610 [ 1.058128] raid6: neonx2 xor() 819 MB/s 3611 [ 1.114888] raid6: neonx4 gen() 1287 MB/s 3612 [ 1.171618] raid6: neonx4 xor() 965 MB/s 3613 [ 1.228373] raid6: neonx8 gen() 1323 MB/s 3614 [ 1.285089] raid6: neonx8 xor() 991 MB/s 3615 [ 1.285094] raid6: using algorithm neonx8 gen() 1323 MB/s 3616 [ 1.285099] raid6: .... xor() 991 MB/s, rmw enabled 3617 [ 1.285104] raid6: using intx1 recovery algorithm 3618 [ 1.285271] pwm module init! 3619 [ 1.289618] sunxi-pm debug v3.10 3620 [ 1.290703] SCSI subsystem initialized 3621 [ 1.291325] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 3622 [ 1.291408] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 3623 [ 1.291528] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 3624 [ 1.292011] spi spi0: master is unqueued, this is deprecated 3625 [ 1.292319] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 3626 [ 1.292903] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 3627 [ 1.292982] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 3628 [ 1.293098] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 3629 [ 1.293547] spi spi1: master is unqueued, this is deprecated 3630 [ 1.293854] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 3631 [ 1.294585] usbcore: registered new interface driver usbfs 3632 [ 1.294684] usbcore: registered new interface driver hub 3633 [ 1.294763] usbcore: registered new device driver usb 3634 [ 1.295046] sunxi_i2c_adap_init()2522 - init 3635 [ 1.295603] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 3636 [ 1.295695] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 3637 [ 1.295702] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 3638 [ 1.295717] twi3 supply twi not found, using dummy regulator 3639 [ 1.295792] twi_request_gpio()451 - [i2c3] init name: twi3 3640 [ 1.296525] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 3641 [ 1.296604] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 3642 [ 1.296611] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 3643 [ 1.296625] twi5 supply twi not found, using dummy regulator 3644 [ 1.296702] twi_request_gpio()451 - [i2c5] init name: twi5 3645 [ 1.297164] axp20x-i2c 5-0036: AXP20x variant AXP806 found 3646 [ 1.310180] axp806-aldo2: Bringing 700000uV into 3300000-3300000uV 3647 [ 1.313858] axp806-aldo3: Bringing 700000uV into 3300000-3300000uV 3648 [ 1.315058] random: fast init done 3649 [ 1.330654] axp20x-i2c 5-0036: AXP20X driver loaded 3650 [ 1.331139] media: Linux media interface: v0.10 3651 [ 1.331217] Linux video capture interface: v2.00 3652 [ 1.332015] Advanced Linux Sound Architecture Driver Initialized. 3653 [ 1.332808] Bluetooth: Core ver 2.22 3654 [ 1.332882] NET: Registered protocol family 31 3655 [ 1.332888] Bluetooth: HCI device and connection manager initialized 3656 [ 1.332906] Bluetooth: HCI socket layer initialized 3657 [ 1.332919] Bluetooth: L2CAP socket layer initialized 3658 [ 1.332958] Bluetooth: SCO socket layer initialized 3659 [ 1.333781] [DISP]disp_module_init 3660 [ 1.335074] [DISP] parser_disp_init_para,line:1403: 3661 [ 1.335083] of_property_read fb0_width fail 3662 [ 1.335094] [DISP] disp_init,line:2215: 3663 [ 1.335100] smooth display screen:0 type:4 mode:10 3664 [ 1.352552] [DISP]disp_module_init finish 3665 [ 1.353418] clocksource: Switched to clocksource arch_sys_counter 3666 [ 1.353675] VFS: Disk quotas dquot_6.6.0 3667 [ 1.353767] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 3668 [ 1.354501] Console: switching to colour frame buffer device 240x67 3669 [ 1.397742] NET: Registered protocol family 2 3670 [ 1.397862] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 3671 [ 1.417007] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 3672 [ 1.417080] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 3673 [ 1.417203] TCP: Hash tables configured (established 8192 bind 8192) 3674 [ 1.417289] UDP hash table entries: 512 (order: 2, 16384 bytes) 3675 [ 1.417318] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 3676 [ 1.417641] NET: Registered protocol family 1 3677 [ 1.418269] RPC: Registered named UNIX socket transport module. 3678 [ 1.418274] RPC: Registered udp transport module. 3679 [ 1.418277] RPC: Registered tcp transport module. 3680 [ 1.418281] RPC: Registered tcp NFSv4.1 backchannel transport module. 3681 [ 1.418556] Trying to unpack rootfs image as initramfs... 3682 [ 2.173216] Freeing initrd memory: 17256K 3683 [ 2.174337] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 3684 [ 2.178251] audit: initializing netlink subsys (disabled) 3685 [ 2.178333] audit: type=2000 audit(2.173:1): initialized 3686 [ 2.179242] workingset: timestamp_bits=45 max_order=18 bucket_order=0 3687 [ 2.190594] DLM installed 3688 [ 2.192418] squashfs: version 4.0 (2009/01/31) Phillip Lougher 3689 [ 2.192757] Registering sdcardfs 0.1 3690 [ 2.193223] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 3691 [ 2.194880] ntfs: driver 2.1.32 [Flags: R/W]. 3692 [ 2.201328] NET: Registered protocol family 38 3693 [ 2.201686] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 3694 [ 2.201804] io scheduler noop registered 3695 [ 2.201811] io scheduler deadline registered 3696 [ 2.201970] io scheduler cfq registered (default) 3697 [ 2.203899] failed to get easy_light_used assign 3698 [ 2.203911] failed to get normal led pin assign 3699 [ 2.203916] failed to get standby led pin assign 3700 [ 2.203921] failed to get standby led pin assign 3701 [ 2.203926] these is zero number for gpio 3702 [ 2.203930] gpio_init finish with uesd 3703 [ 2.207432] uart uart0: get regulator failed 3704 [ 2.207645] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 3705 [ 2.207668] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 3706 [ 2.207762] console [ttyS0] enabled 3707 [ 2.208572] uart uart1: get regulator failed 3708 [ 2.208760] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 3709 [ 2.209477] uart uart5: get regulator failed 3710 [ 2.209658] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 3711 [ 2.210972] misc dump reg init 3712 [ 2.212103] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 3713 [ 2.212441] Unable to detect cache hierarchy for CPU 0 3714 [ 2.226536] brd: module loaded 3715 [ 2.234698] loop: module loaded 3716 [ 2.234889] [NAND][NE] Not found valid nand node on dts 3717 [ 2.235466] Get boot type cmd line fail 3718 [ 2.236050] sunxi-bt soc@03000000:bt: Missing bt_power. 3719 [ 2.236060] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 3720 [ 2.236067] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 3721 [ 2.236074] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 3722 [ 2.236132] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 3723 [ 2.236205] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 3724 [ 2.237089] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 3725 [ 2.237100] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 3726 [ 2.237108] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 3727 [ 2.237116] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 3728 [ 2.237123] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 3729 [ 2.237151] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 3730 [ 2.237185] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 3731 [ 2.237194] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 3732 [ 2.237211] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 3733 [ 2.238161] [ADDR_MGT] addr_mgt_probe: success. 3734 [ 2.244758] tun: Universal TUN/TAP device driver, 1.6 3735 [ 2.244768] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 3736 [ 2.246839] gmac-power0: NULL 3737 [ 2.246850] gmac-power1: NULL 3738 [ 2.246856] gmac-power2: NULL 3739 [ 2.247778] PPP generic driver version 2.4.2 3740 [ 2.248063] PPP BSD Compression module registered 3741 [ 2.248073] PPP Deflate Compression module registered 3742 [ 2.248100] PPP MPPE Compression module registered 3743 [ 2.248109] NET: Registered protocol family 24 3744 [ 2.248143] PPTP driver version 0.8.5 3745 [ 2.248502] usbcore: registered new interface driver r8152 3746 [ 2.248585] usbcore: registered new interface driver asix 3747 [ 2.248683] usbcore: registered new interface driver ax88179_178a 3748 [ 2.248751] usbcore: registered new interface driver cdc_ether 3749 [ 2.248820] usbcore: registered new interface driver net1080 3750 [ 2.248880] usbcore: registered new interface driver cdc_subset 3751 [ 2.248942] usbcore: registered new interface driver zaurus 3752 [ 2.249035] usbcore: registered new interface driver cdc_ncm 3753 [ 2.249042] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 3754 [ 2.249397] get drv_vbus is fail, 84 3755 [ 2.249405] get ehci0-controller, regulator_io is no nocare 3756 [ 2.249677] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 3757 [ 2.249682] [sunxi-ehci0]: Not init ehci0 3758 [ 2.249797] get ehci1-controller, regulator_io is no nocare 3759 [ 2.249973] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 3760 [ 2.250030] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3761 [ 2.250057] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 3762 [ 2.250724] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 3763 [ 2.263435] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 3764 [ 2.263740] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 3765 [ 2.263749] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3766 [ 2.263756] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3767 [ 2.263764] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 3768 [ 2.263770] usb usb1: SerialNumber: sunxi-ehci 3769 [ 2.264681] hub 1-0:1.0: USB hub found 3770 [ 2.264732] hub 1-0:1.0: 1 port detected 3771 [ 2.265411] get drv_vbus is fail, 84 3772 [ 2.265419] get ehci2-controller, regulator_io is no nocare 3773 [ 2.265664] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 3774 [ 2.265715] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3775 [ 2.265740] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 3776 [ 2.266053] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 3777 [ 2.276778] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 3778 [ 2.276987] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 3779 [ 2.276996] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3780 [ 2.277004] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3781 [ 2.277011] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 3782 [ 2.277018] usb usb2: SerialNumber: sunxi-ehci 3783 [ 2.277863] hub 2-0:1.0: USB hub found 3784 [ 2.277909] hub 2-0:1.0: 1 port detected 3785 [ 2.278579] get drv_vbus is fail, 84 3786 [ 2.278587] get ehci3-controller, regulator_io is no nocare 3787 [ 2.278830] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 3788 [ 2.278881] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3789 [ 2.278906] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 3790 [ 2.279195] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 3791 [ 2.290095] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 3792 [ 2.290315] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 3793 [ 2.290324] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3794 [ 2.290332] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3795 [ 2.290339] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 3796 [ 2.290346] usb usb3: SerialNumber: sunxi-ehci 3797 [ 2.291181] hub 3-0:1.0: USB hub found 3798 [ 2.291223] hub 3-0:1.0: 1 port detected 3799 [ 2.292140] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 3800 [ 2.292518] get drv_vbus is fail, 84 3801 [ 2.292526] get ohci0-controller, regulator_io is no nocare 3802 [ 2.292859] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 3803 [ 2.292865] [sunxi-ohci0]: Not init ohci0 3804 [ 2.292978] get ohci1-controller, regulator_io is no nocare 3805 [ 2.293134] hci: request ohci1-controller gpio:80 3806 [ 2.293209] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 3807 [ 2.293258] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 3808 [ 2.293284] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 3809 [ 2.293362] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 3810 [ 2.354289] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 3811 [ 2.354300] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3812 [ 2.354308] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 3813 [ 2.354315] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 3814 [ 2.354322] usb usb4: SerialNumber: sunxi-ohci 3815 [ 2.355199] hub 4-0:1.0: USB hub found 3816 [ 2.355247] hub 4-0:1.0: 1 port detected 3817 [ 2.355924] get drv_vbus is fail, 84 3818 [ 2.355933] get ohci2-controller, regulator_io is no nocare 3819 [ 2.356264] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 3820 [ 2.356314] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 3821 [ 2.356346] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 3822 [ 2.356424] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 3823 [ 2.414263] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 3824 [ 2.414273] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3825 [ 2.414281] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 3826 [ 2.414288] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 3827 [ 2.414295] usb usb5: SerialNumber: sunxi-ohci 3828 [ 2.415160] hub 5-0:1.0: USB hub found 3829 [ 2.415205] hub 5-0:1.0: 1 port detected 3830 [ 2.415902] get drv_vbus is fail, 84 3831 [ 2.415911] get ohci3-controller, regulator_io is no nocare 3832 [ 2.416242] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 3833 [ 2.416292] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 3834 [ 2.416319] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 3835 [ 2.416395] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 3836 [ 2.474264] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 3837 [ 2.474275] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3838 [ 2.474283] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 3839 [ 2.474290] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 3840 [ 2.474297] usb usb6: SerialNumber: sunxi-ohci 3841 [ 2.475152] hub 6-0:1.0: USB hub found 3842 [ 2.475202] hub 6-0:1.0: 1 port detected 3843 [ 2.476122] ohci-platform: OHCI generic platform driver 3844 [ 2.476901] usbcore: registered new interface driver uas 3845 [ 2.477073] usbcore: registered new interface driver usb-storage 3846 [ 2.477158] usbcore: registered new interface driver ums-alauda 3847 [ 2.477252] usbcore: registered new interface driver ums-cypress 3848 [ 2.477331] usbcore: registered new interface driver ums-datafab 3849 [ 2.477404] usbcore: registered new interface driver ums_eneub6250 3850 [ 2.477476] usbcore: registered new interface driver ums-freecom 3851 [ 2.477550] usbcore: registered new interface driver ums-isd200 3852 [ 2.477619] usbcore: registered new interface driver ums-jumpshot 3853 [ 2.477690] usbcore: registered new interface driver ums-karma 3854 [ 2.477764] usbcore: registered new interface driver ums-onetouch 3855 [ 2.477863] usbcore: registered new interface driver ums-realtek 3856 [ 2.477942] usbcore: registered new interface driver ums-sddr09 3857 [ 2.478011] usbcore: registered new interface driver ums-sddr55 3858 [ 2.478083] usbcore: registered new interface driver ums-usbat 3859 [ 2.478230] usb_serial_number:20080411 3860 [ 2.479464] input: sunxi-keyboard as /devices/virtual/input/input0 3861 [ 2.480122] usbcore: registered new interface driver xpad 3862 [ 2.480243] usbcore: registered new interface driver usb_acecad 3863 [ 2.480331] usbcore: registered new interface driver aiptek 3864 [ 2.480421] usbcore: registered new interface driver gtco 3865 [ 2.480501] usbcore: registered new interface driver hanwang 3866 [ 2.480579] usbcore: registered new interface driver kbtab 3867 [ 2.481065] axp2101_pek: axp2101-pek can not register without irq 3868 [ 2.481088] axp2101-pek: probe of axp2101-pek.0 failed with error -22 3869 [ 2.482496] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 3870 [ 2.482563] sunxi-rtc rtc: RTC enabled 3871 [ 2.483043] i2c /dev entries driver 3872 [ 2.483871] lirc_dev: IR Remote Control driver registered, major 244 3873 [ 2.483882] IR NEC protocol handler initialized 3874 [ 2.483888] IR RC5(x/sz) protocol handler initialized 3875 [ 2.483894] IR RC6 protocol handler initialized 3876 [ 2.483900] IR JVC protocol handler initialized 3877 [ 2.483905] IR Sony protocol handler initialized 3878 [ 2.483911] IR SANYO protocol handler initialized 3879 [ 2.483917] IR Sharp protocol handler initialized 3880 [ 2.483923] IR MCE Keyboard/mouse protocol handler initialized 3881 [ 2.483928] IR LIRC bridge handler initialized 3882 [ 2.483934] IR XMP protocol handler initialized 3883 [ 2.484454] sunxi_ir_startup: get ir protocol failed 3884 [ 2.484497] 7040000.s_cir supply ir0 not found, using dummy regulator 3885 [ 2.484692] Registered IR keymap rc_map_sunxi 3886 [ 2.485095] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 3887 [ 2.485338] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 3888 [ 2.486311] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 3889 [ 2.486942] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 3890 [ 2.487670] sunxi cedar version 0.1 3891 [ 2.487858] VE: install start!!! 3892 3893 [ 2.488044] cedar_ve: cedar-ve the get irq is 278 3894 [ 2.488650] VE: get debugfs_mpp_root is NULL, please check mpp 3895 3896 [ 2.488660] VE: sunxi ve debug register driver failed! 3897 3898 [ 2.491889] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 3899 [ 2.493179] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 3900 [ 2.493547] Bluetooth: HCI UART driver ver 2.3 3901 [ 2.493558] Bluetooth: HCI UART protocol H4 registered 3902 [ 2.493563] Bluetooth: HCI UART protocol LL registered 3903 [ 2.493569] Bluetooth: HCI UART protocol Three-wire (H5) registered 3904 [ 2.497768] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 3905 [ 2.497783] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 3906 [ 2.497796] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 3907 [ 2.497808] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 3908 [ 2.497820] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 3909 [ 2.497832] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 3910 [ 2.498249] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 3911 [ 2.498364] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 3912 [ 2.498560] sunxi-mmc sdc0: No vmmc regulator found 3913 [ 2.498567] sunxi-mmc sdc0: No vqmmc regulator found 3914 [ 2.498573] sunxi-mmc sdc0: No vdmmc regulator found 3915 [ 2.498580] sunxi-mmc sdc0: No vd33sw regulator found 3916 [ 2.498586] sunxi-mmc sdc0: No vd18sw regulator found 3917 [ 2.498592] sunxi-mmc sdc0: No vq33sw regulator found 3918 [ 2.498598] sunxi-mmc sdc0: No vq18sw regulator found 3919 [ 2.499326] sunxi-mmc sdc0: set host busy 3920 [ 2.499426] sunxi-mmc sdc0: Got CD GPIO 3921 [ 2.499813] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 3922 [ 2.499850] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 3923 [ 2.516764] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3924 [ 2.533806] sunxi-mmc sdc0: detmode:gpio irq 3925 [ 2.533839] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3926 [ 2.536344] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3927 [ 2.537075] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 3928 [ 2.537176] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 3929 [ 2.537314] sunxi-mmc sdc1: No vmmc regulator found 3930 [ 2.537321] sunxi-mmc sdc1: No vqmmc regulator found 3931 [ 2.537327] sunxi-mmc sdc1: No vdmmc regulator found 3932 [ 2.537334] sunxi-mmc sdc1: No vd33sw regulator found 3933 [ 2.537340] sunxi-mmc sdc1: No vd18sw regulator found 3934 [ 2.537346] sunxi-mmc sdc1: No vq33sw regulator found 3935 [ 2.537352] sunxi-mmc sdc1: No vq18sw regulator found 3936 [ 2.537991] sunxi-mmc sdc1: set host busy 3937 [ 2.538076] mmc:failed to get gpios 3938 [ 2.538370] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 3939 [ 2.538666] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3940 [ 2.541218] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3941 [ 2.553490] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3942 [ 2.558774] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3943 [ 2.558814] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 3944 [ 2.570101] sunxi-mmc sdc1: detmode:manually by software 3945 [ 2.570939] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 3946 [ 2.571786] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 3947 [ 2.571829] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3948 [ 2.573470] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3949 [ 2.574340] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3950 [ 2.575452] ledtrig-cpu: registered to indicate activity on CPUs 3951 [ 2.576225] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 3952 [ 2.577065] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 3953 [ 2.577910] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 3954 [ 2.578743] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 3955 [ 2.578780] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 3956 [ 2.581383] mmc0: host does not support reading read-only switch, assuming write-enable 3957 [ 2.581747] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 3958 [ 2.581754] sunxi_emce_probe()590emce hw init failed! 3959 [ 2.581781] emce: probe of emce failed with error -2 3960 [ 2.582055] hidraw: raw HID events driver (C) Jiri Kosina 3961 [ 2.582071] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 3962 [ 2.583133] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 3963 [ 2.583288] sunxi-mmc sdc0: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 3964 [ 2.583498] mmc0: new ultra high speed SDR104 SDXC card at address 0001 3965 [ 2.584650] mmcblk0: mmc0:0001 SD16G 59.5 GiB 3966 [ 2.586287] mmcblk0: p1 3967 [ 2.588546] usbcore: registered new interface driver usbhid 3968 [ 2.588555] usbhid: USB HID core driver 3969 [ 2.589976] optee: probing for conduit method from DT. 3970 [ 2.589990] optee: api uid mismatch 3971 [ 2.590582] usbcore: registered new interface driver snd-usb-audio 3972 [ 2.592188] [sunxi_hdmi_codec_init] driver and deivce register finished. 3973 [ 2.593979] [sunxi_internal_codec_probe]:get audio avcc failed 3974 [ 2.594019] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 3975 [ 2.594256] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 3976 [ 2.596798] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 3977 [ 2.598699] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 3978 [ 2.598712] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 3979 [ 2.600998] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 3980 [ 2.601022] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 3981 [ 2.605039] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 3982 [ 2.606425] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 3983 [ 2.608467] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 3984 [ 2.611539] pktgen: Packet Generator for packet performance testing. Version: 2.75 3985 [ 2.611969] u32 classifier 3986 [ 2.611976] Actions configured 3987 [ 2.611988] Netfilter messages via NETLINK v0.30. 3988 [ 2.612017] nfnl_acct: registering with nfnetlink. 3989 [ 2.612355] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 3990 [ 2.612612] ctnetlink v0.93: registering with nfnetlink. 3991 [ 2.613365] xt_time: kernel timezone is -0000 3992 [ 2.613388] IPVS: Registered protocols (TCP, UDP) 3993 [ 2.613601] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 3994 [ 2.613739] IPVS: Creating netns size=1928 id=0 3995 [ 2.613881] IPVS: ipvs loaded. 3996 [ 2.613890] IPVS: [rr] scheduler registered. 3997 [ 2.613990] ipip: IPv4 and MPLS over IPv4 tunneling driver 3998 [ 2.614729] gre: GRE over IPv4 demultiplexor driver 3999 [ 2.614738] ip_gre: GRE over IPv4 tunneling driver 4000 [ 2.616062] IPv4 over IPsec tunneling driver 4001 [ 2.616986] ip_tables: (C) 2000-2006 Netfilter Core Team 4002 [ 2.617288] arp_tables: arp_tables: (C) 2002 David S. Miller 4003 [ 2.617354] Initializing XFRM netlink socket 4004 [ 2.617387] IPsec XFRM device driver 4005 [ 2.618249] NET: Registered protocol family 10 4006 [ 2.620158] mip6: Mobile IPv6 4007 [ 2.620199] ip6_tables: (C) 2000-2006 Netfilter Core Team 4008 [ 2.621525] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 4009 [ 2.623174] NET: Registered protocol family 17 4010 [ 2.623215] NET: Registered protocol family 15 4011 [ 2.623379] Bridge firewalling registered 4012 [ 2.623597] Bluetooth: RFCOMM TTY layer initialized 4013 [ 2.623616] Bluetooth: RFCOMM socket layer initialized 4014 [ 2.623649] Bluetooth: RFCOMM ver 1.11 4015 [ 2.623663] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 4016 [ 2.623669] Bluetooth: BNEP filters: protocol multicast 4017 [ 2.623682] Bluetooth: BNEP socket layer initialized 4018 [ 2.623688] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 4019 [ 2.623700] Bluetooth: HIDP socket layer initialized 4020 [ 2.623787] l2tp_core: L2TP core driver, V2.0 4021 [ 2.623803] l2tp_ppp: PPPoL2TP kernel driver, V2.0 4022 [ 2.623809] 8021q: 802.1Q VLAN Support v1.8 4023 [ 2.624029] sctp: Hash tables configured (bind 256/256) 4024 [ 2.624619] Key type dns_resolver registered 4025 [ 2.624759] Registered cp15_barrier emulation handler 4026 [ 2.624775] Registered setend emulation handler 4027 [ 2.625732] registered taskstats version 1 4028 [ 2.637412] zswap: default zpool zbud not available 4029 [ 2.637420] zswap: pool creation failed 4030 [ 2.640238] Btrfs loaded, crc32c=crc32c-arm64-hw 4031 [ 2.640984] HDMI 2.0 driver init start! 4032 [ 2.640999] boot_hdmi=true 4033 [ 2.641888] Can not find the node of esm 4034 [ 2.641910] ERROR: pinctrl_get for HDMI2.0 DDC fail 4035 [ 2.642000] Get hdmi_power0:vcc-hdmi 4036 [ 2.642039] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 4037 [ 2.642213] Get hdmi_power1:vdd-hdmi 4038 [ 2.642235] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 4039 [ 2.643781] hdmi_cec_init 4040 [ 2.644253] [DISP] disp_device_attached,line:146: 4041 [ 2.644263] attached ok, mgr0<-->device0, type=4 4042 [ 2.644273] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 4043 [ 2.644286] [DISP] disp_hdmi_set_mode,line:648: 4044 [ 2.644291] hdmi_set_mode is null! 4045 [ 2.646282] HDMI2.0 module init end 4046 [ 2.657625] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 4047 [ 2.661018] cpu cpu1: opp_list_debug_create_link: Failed to create link 4048 [ 2.661029] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 4049 [ 2.661062] cpu cpu2: opp_list_debug_create_link: Failed to create link 4050 [ 2.661069] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 4051 [ 2.661099] cpu cpu3: opp_list_debug_create_link: Failed to create link 4052 [ 2.661106] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 4053 [ 2.663372] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 4054 [ 2.664357] get det_vbus is fail, 84 4055 [ 2.664364] get id is fail, 84 4056 [ 2.664853] sunxi-rtc rtc: setting system clock to 1970-01-01 00:00:08 UTC (8) 4057 [ 2.666258] axp806-dcdcb: disabling 4058 [ 2.668244] axp806-cldo1: disabling 4059 [ 2.669878] ALSA device list: 4060 [ 2.669883] #0: audiocodec 4061 [ 2.669887] #1: sndahub 4062 [ 2.669890] #2: sndhdmi 4063 [ 2.671549] Freeing unused kernel memory: 3008K 4064 [ 2.716878] random: systemd-udevd: uninitialized urandom read (16 bytes read) 4065 [ 2.718849] random: systemd-udevd: uninitialized urandom read (16 bytes read) 4066 [ 2.721751] random: systemd-udevd: uninitialized urandom read (16 bytes read) 4067 [ 2.787155] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 4068 [ 2.950231] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 4069 [ 3.050169] HDMI cable is connected 4070 [ 3.300112] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 4071 [ 3.520629] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 4072 [ 3.520637] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 4073 [ 3.520642] usb 4-1: Product: Rapoo 2.4G Wireless Device 4074 [ 3.520647] usb 4-1: Manufacturer: RAPOO 4075 [ 3.528552] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 4076 [ 3.529137] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 4077 [ 3.535296] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 4078 [ 3.590987] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 4079 [ 3.594916] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 4080 [ 3.652089] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 4081 [ 4.648774] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 4082 [ 5.149026] systemd[1]: System time before build time, advancing clock. 4083 [ 5.153888] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 4084 [ 5.154532] cgroup: cgroup2: unknown option "nsdelegate" 4085 [ 5.167122] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 4086 [ 5.167146] systemd[1]: Detected architecture arm64. 4087 [ 5.168243] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 4088 [ 5.174347] systemd[1]: Hostname set to <opi>. 4089 [ 5.189012] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 4090 [ 6.048114] (sd-execut[1463]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 4091 [ 6.404139] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 4092 [ 6.630871] systemd[1]: Queued start job for default target graphical.target. 4093 [ 6.638188] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 4094 [ 6.640492] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 4095 [ 6.642717] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 4096 [ 6.644107] systemd[1]: Created slice user.slice - User and Session Slice. 4097 [ 6.644745] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 4098 [ 6.645300] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 4099 [ 6.645621] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 4100 [ 6.646126] systemd[1]: Reached target slices.target - Slice Units. 4101 [ 6.646424] systemd[1]: Reached target swap.target - Swaps. 4102 [ 6.646693] systemd[1]: Reached target time-set.target - System Time Set. 4103 [ 6.647210] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 4104 [ 6.664481] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 4105 [ 6.665565] systemd[1]: Listening on syslog.socket - Syslog Socket. 4106 [ 6.666493] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 4107 [ 6.667249] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 4108 [ 6.668873] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 4109 [ 6.669806] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 4110 [ 6.670921] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 4111 [ 6.672981] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 4112 [ 6.673962] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 4113 [ 6.677940] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 4114 [ 6.682530] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 4115 [ 6.687914] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 4116 [ 6.689005] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 4117 [ 6.690001] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 4118 [ 6.697394] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 4119 [ 6.702802] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 4120 [ 6.708936] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 4121 [ 6.717640] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 4122 [ 6.727773] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 4123 [ 6.734831] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 4124 [ 6.742802] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 4125 [ 6.750866] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 4126 [ 6.758016] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 4127 [ 6.760255] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 4128 [ 6.770670] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 4129 [ 6.777606] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 4130 [ 6.784370] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 4131 [ 6.793365] fuse init (API version 7.26) 4132 [ 6.800338] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 4133 [ 6.804451] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 4134 [ 6.807719] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 4135 [ 6.811750] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 4136 [ 6.815623] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 4137 [ 6.819314] systemd[1]: modprobe@configfs.service: Deactivated successfully. 4138 [ 6.821122] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 4139 [ 6.825927] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 4140 [ 6.826881] 4141 insmod_device_driver 4142 4143 [ 6.827201] device_chose finished 124! 4144 [ 6.827936] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 4145 [ 6.834941] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 4146 [ 6.844869] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 4147 [ 6.852000] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 4148 [ 6.852967] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 4149 [ 6.852977] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 4150 [ 6.853169] spidev spi1.1: Deleting spi1.1 4151 [ 6.854092] fbtft_device: GPIOS used by 'fb_st7735r': 4152 [ 6.854099] fbtft_device: 'reset' = GPIO73 4153 [ 6.854103] fbtft_device: 'dc' = GPIO70 4154 [ 6.854114] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 4155 [ 6.854120] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 4156 [ 6.879009] WCN: marlin_init entry! 4157 [ 6.880228] WCN: marlin_parse_dt reset gpio=211 4158 [ 6.880239] WCN_ERR: gpio reset request err: 211 4159 [ 6.880245] WCN: wcn config bt wake host 4160 [ 6.880795] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 4161 [ 6.881011] WCN: wcn config wifi wake host 4162 [ 6.881033] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 4163 [ 6.884501] sdiohal:sdiohal_init ok 4164 [ 6.885358] WCN: marlin_probe ok! 4165 [ 6.892654] mtty_probe init device addr: 0xffffffc0097acc00 4166 [ 6.892873] -->rfkill_bluetooth_init 4167 [ 6.893072] <--rfkill_bluetooth_init 4168 [ 6.901683] systemd[1]: modprobe@drm.service: Deactivated successfully. 4169 [ 6.902493] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 4170 [ 6.909481] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 4171 [ 6.910525] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 4172 [ 6.913492] systemd[1]: modprobe@fuse.service: Deactivated successfully. 4173 [ 6.914447] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 4174 [ 6.918362] systemd[1]: modprobe@loop.service: Deactivated successfully. 4175 [ 6.921887] WCN: start_marlin [MARLIN_WIFI] 4176 [ 6.921901] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 4177 [ 6.921904] WCN: the first power on start 4178 [ 6.964092] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 4179 [ 6.990704] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 4180 [ 6.998780] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 4181 [ 7.004536] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 4182 [ 7.005551] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 4183 [ 7.036842] WCN: marlin chip en pull up 4184 [ 7.041179] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 4185 [ 7.042418] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 4186 [ 7.049265] systemd[1]: Starting systemd-sysusers.service - Create System Users... 4187 [ 7.063498] sdiohal:sdiohal_scan_card 4188 [ 7.063518] sunxi-wlan soc@03000000:wlan: bus_index: 1 4189 [ 7.063715] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 4190 [ 7.065203] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 4191 [ 7.067908] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 4192 [ 7.070056] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 4193 [ 7.080184] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4194 [ 7.097638] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 4195 [ 7.098517] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 4196 [ 7.098557] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4197 [ 7.101071] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4198 [ 7.104191] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4199 [ 7.111988] systemd[1]: Finished systemd-sysusers.service - Create System Users. 4200 [ 7.118800] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 4201 [ 7.120218] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4202 [ 7.131520] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 4203 [ 7.132273] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 4204 [ 7.132328] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 4205 [ 7.132926] mmc1: new ultra high speed SDR104 SDIO card at address 8800 4206 [ 7.133371] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 4207 [ 7.133770] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 4208 [ 7.133804] sdiohal:scan end! 4209 [ 7.133815] WCN: marlin_scan_finish! 4210 [ 7.133827] WCN: then marlin start to download 4211 [ 7.133837] sdiohal:probe ok 4212 [ 7.133871] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 4213 [ 7.201228] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 4214 [ 7.203486] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 4215 [ 7.209184] systemd[1]: Mounting tmp.mount - /tmp... 4216 [ 7.214720] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 4217 [ 7.217170] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 4218 [ 7.222287] systemd[1]: Mounted tmp.mount - /tmp. 4219 [ 7.224625] systemd[1]: Reached target local-fs.target - Local File Systems. 4220 [ 7.253090] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 4221 [ 7.258291] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 4222 [ 7.263770] systemd[1]: Starting console-setup.service - Set console font and keymap... 4223 [ 7.273395] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 4224 [ 7.280051] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 4225 [ 7.297697] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 4226 [ 7.305671] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 4227 [ 7.312960] systemd[1]: Starting ufw.service - Uncomplicated firewall... 4228 [ 7.316886] systemd[1]: Finished console-setup.service - Set console font and keymap. 4229 [ 7.321392] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 4230 [ 7.324235] systemd[1]: Received SIGRTMIN+20 from PID 1421 (plymouthd). 4231 [ 7.364894] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 4232 [ 7.367838] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 4233 [ 7.368732] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 4234 [ 7.369688] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 4235 [ 7.372600] systemd[1]: Finished ufw.service - Uncomplicated firewall. 4236 [ 7.385284] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 4237 [ 7.388680] systemd[1]: Reached target network-pre.target - Preparation for Network. 4238 [ 7.563709] zram: Added device: zram0 4239 [ 7.564594] zram: Added device: zram1 4240 [ 7.565372] zram: Added device: zram2 4241 [ 7.596641] zswap: can't enable, initialization failed 4242 [ 7.631630] zram0: detected capacity change from 0 to 506396672 4243 [ 7.717088] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 4244 [ 7.730819] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 4245 [ 7.788683] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 4246 [ 7.791220] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 4247 [ 7.792262] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 4248 [ 7.792933] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 4249 [ 7.808929] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 4250 [ 8.160208] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 4251 [ 9.153318] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 4252 [ 9.173543] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 4253 [ 9.242911] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 4254 [ 9.380524] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 4255 [ 9.671062] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 4256 [ 9.686402] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 4257 [ 9.729479] sunxi-bt soc@03000000:bt: set block: 0 4258 [ 9.749704] bluetooth_set_power: start_block=0 4259 [ 9.749717] WCN: start_marlin [MARLIN_BLUETOOTH] 4260 [ 9.873282] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 4261 [ 9.873595] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 4262 [ 9.874250] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 4263 [ 9.880617] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 4264 [ 9.891122] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 4265 [ 9.902156] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 4266 [ 9.910280] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 4267 [ 9.914021] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 4268 [ 9.914867] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 4269 [ 9.917807] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 4270 [ 9.921733] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 4271 [ 9.926699] systemd[1]: modprobe@loop.service: Deactivated successfully. 4272 [ 9.970866] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 4273 [ 9.973118] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 4274 [ 9.974600] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 4275 [ 9.975497] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 4276 [ 9.977899] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 4277 [ 9.978199] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 4278 [ 10.041010] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 4279 [ 10.046987] systemd[1]: Starting brltty.service - Braille Device Support... 4280 [ 10.186775] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 4281 [ 10.660377] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 4282 [ 10.715393] systemd[1]: Started brltty.service - Braille Device Support. 4283 [ 10.724860] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 4284 [ 10.825855] zram1: detected capacity change from 0 to 52428800 4285 [ 11.200171] WCN_ERR: btwifi_download_firmware request firmware error 4286 [ 14.879269] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 4287 [ 14.885303] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 4288 [ 14.941500] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 4289 [ 18.419212] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 4290 [ 18.425601] systemd[1]: Starting systemd-journald.service - Journal Service... 4291 [ 18.697120] systemd-journald[1844]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.1 (1655 of 2204 items, 1269760 file size, 767 bytes per hash table item), suggesting rotation. 4292 [ 18.697143] systemd-journald[1844]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 4293 [ 18.701111] systemd[1]: Started systemd-journald.service - Journal Service. 4294 [ 18.742686] systemd-journald[1844]: Received client request to flush runtime journal. 4295 [ 19.006495] IPVS: Creating netns size=1928 id=1 4296 [ 19.976211] random: crng init done 4297 [ 19.976222] random: 7 urandom warning(s) missed due to ratelimiting 4298 [ 37.173491] WCN_ERR: marlin download timeout 4299 [ 37.173503] sdiohal:sdiohal_runtime_put entry 4300 [ 37.173609] sdiohal:sdiohal_runtime_put wait xmit_cnt end 4301 [ 37.173653] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 1 4302 [ 37.173658] WCN: no module to power on, start to power on 4303 [ 37.184625] sdiohal err:sdiohal_adma_pt_write xmit_cnt:0 xmit_start:0,not have card 4304 [ 37.184647] sdiohal err:sdiohal_aon_writeb xmit_cnt:0 xmit_start:0,not have card 4305 [ 37.184652] sdiohal err:sdiohal_aon_writeb xmit_cnt:0 xmit_start:0,not have card 4306 [ 37.200146] sdiohal:sdiohal_scan_card 4307 [ 37.200158] sdiohal:Already exist card!, xmit_cnt=0x0 4308 [ 37.200172] sunxi-wlan soc@03000000:wlan: bus_index: 1 4309 [ 37.200294] sdiohal:[sdiohal_remove]enter 4310 [ 37.200310] sdiohal:remove card end 4311 [ 37.200462] mmc1: card 8800 removed 4312 [ 37.200559] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 4313 [ 37.201660] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 4314 [ 37.216764] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4315 [ 37.234165] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4316 [ 37.236691] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4317 [ 37.239806] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4318 [ 37.253438] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4319 [ 37.264006] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 4320 [ 37.264734] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 4321 [ 37.264783] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 4322 [ 37.265328] mmc1: new ultra high speed SDR104 SDIO card at address 8800 4323 [ 37.306765] sunxi-wlan soc@03000000:wlan: bus_index: 1 4324 [ 37.307017] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 4325 [ 37.307095] WCN: marlin_scan_finish! 4326 [ 37.307100] sdiohal:probe ok 4327 [ 37.307190] sdiohal:scan end! 4328 [ 37.307197] WCN: only marlin start to download 4329 [ 37.307218] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 4330 [ 38.320161] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 4331 [ 39.333502] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 4332 [ 40.346784] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 4333 [ 40.379920] unisoc_wifi: probe of unisoc_wifi failed with error -1 4334 4335 ### armbian-release: 4336 4337 # PLEASE DO NOT EDIT THIS FILE 4338 BOARD=orangepizero2 4339 BOARD_NAME="Orange Pi Zero2" 4340 BOARDFAMILY=sun50iw9 4341 BUILD_REPOSITORY_URL=https://github.com/armbian/build 4342 BUILD_REPOSITORY_COMMIT=ac829eb6 4343 LINUXFAMILY=sun50iw9 4344 ARCH=arm64 4345 IMAGE_TYPE=stable 4346 BOARD_TYPE=conf 4347 INITRD_ARCH=arm 4348 KERNEL_IMAGE_TYPE=Image 4349 FORCE_BOOTSCRIPT_UPDATE=yes 4350 VENDOR=Armbian 4351 BOOTSCRIPT_FORCE_UPDATE="yes" 4352 BOOTSCRIPT_DST="boot.cmd" 4353 VERSION=23.8.1 4354 REVISION=23.8.1 4355 BRANCH=legacy 4356 4357 ### boot environment: 4358 4359 verbosity=1 4360 console=serial 4361 #disp_mode=1080p60 4362 #fb0_width=1280 4363 #fb0_height=720 4364 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 4365 rootfstype=ext4 4366 overlays=spi-spidev 4367 param_spidev_spi_bus=1 4368 param_spidev_spi_cs=1 4369 extraargs=fbcon=map:1 4370 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 4371 4372 ### lsusb: 4373 4374 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 4375 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 4376 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 4377 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 4378 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 4379 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 4380 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 4381 4382 ### lscpu: 4383 4384 Architecture: aarch64 4385 CPU op-mode(s): 32-bit, 64-bit 4386 Byte Order: Little Endian 4387 CPU(s): 4 4388 On-line CPU(s) list: 0-3 4389 Vendor ID: ARM 4390 Model name: Cortex-A53 4391 Model: 4 4392 Thread(s) per core: 1 4393 Core(s) per cluster: 4 4394 Socket(s): - 4395 Cluster(s): 1 4396 Stepping: r0p4 4397 CPU(s) scaling MHz: 100% 4398 CPU max MHz: 1512.0000 4399 CPU min MHz: 480.0000 4400 BogoMIPS: 48.00 4401 Flags: fp asimd aes pmull sha1 sha2 crc32 4402 4403 ### cpuinfo: 4404 4405 processor : 0 4406 BogoMIPS : 48.00 4407 Features : fp asimd aes pmull sha1 sha2 crc32 4408 CPU implementer : 0x41 4409 CPU architecture: 8 4410 CPU variant : 0x0 4411 CPU part : 0xd03 4412 CPU revision : 4 4413 4414 processor : 1 4415 BogoMIPS : 48.00 4416 Features : fp asimd aes pmull sha1 sha2 crc32 4417 CPU implementer : 0x41 4418 CPU architecture: 8 4419 CPU variant : 0x0 4420 CPU part : 0xd03 4421 CPU revision : 4 4422 4423 processor : 2 4424 BogoMIPS : 48.00 4425 Features : fp asimd aes pmull sha1 sha2 crc32 4426 CPU implementer : 0x41 4427 CPU architecture: 8 4428 CPU variant : 0x0 4429 CPU part : 0xd03 4430 CPU revision : 4 4431 4432 processor : 3 4433 BogoMIPS : 48.00 4434 Features : fp asimd aes pmull sha1 sha2 crc32 4435 CPU implementer : 0x41 4436 CPU architecture: 8 4437 CPU variant : 0x0 4438 CPU part : 0xd03 4439 CPU revision : 4 4440 4441 4442 ### meminfo: 4443 4444 MemTotal: 989056 kB 4445 MemFree: 798200 kB 4446 MemAvailable: 886428 kB 4447 Buffers: 15720 kB 4448 Cached: 79444 kB 4449 SwapCached: 0 kB 4450 Active: 68448 kB 4451 Inactive: 50800 kB 4452 Active(anon): 24192 kB 4453 Inactive(anon): 644 kB 4454 Active(file): 44256 kB 4455 Inactive(file): 50156 kB 4456 Unevictable: 0 kB 4457 Mlocked: 0 kB 4458 SwapTotal: 494524 kB 4459 SwapFree: 494524 kB 4460 Dirty: 712 kB 4461 Writeback: 0 kB 4462 AnonPages: 23968 kB 4463 Mapped: 24876 kB 4464 Shmem: 812 kB 4465 Slab: 28268 kB 4466 SReclaimable: 9280 kB 4467 SUnreclaim: 18988 kB 4468 KernelStack: 2560 kB 4469 PageTables: 1036 kB 4470 NFS_Unstable: 0 kB 4471 Bounce: 0 kB 4472 WritebackTmp: 0 kB 4473 CommitLimit: 989052 kB 4474 Committed_AS: 83364 kB 4475 VmallocTotal: 263061440 kB 4476 VmallocUsed: 0 kB 4477 VmallocChunk: 0 kB 4478 CmaTotal: 16384 kB 4479 CmaFree: 7468 kB 4480 HugePages_Total: 0 4481 HugePages_Free: 0 4482 HugePages_Rsvd: 0 4483 HugePages_Surp: 0 4484 Hugepagesize: 2048 kB 4485 4486 ### virtual memory: 4487 4488 vm.admin_reserve_kbytes = 8192 4489 vm.block_dump = 0 4490 vm.compact_unevictable_allowed = 1 4491 vm.dirty_background_bytes = 0 4492 vm.dirty_background_ratio = 10 4493 vm.dirty_bytes = 0 4494 vm.dirty_expire_centisecs = 3000 4495 vm.dirty_ratio = 20 4496 vm.dirtytime_expire_seconds = 43200 4497 vm.dirty_writeback_centisecs = 500 4498 vm.extfrag_threshold = 500 4499 vm.extra_free_kbytes = 0 4500 vm.hugepages_treat_as_movable = 0 4501 vm.hugetlb_shm_group = 0 4502 vm.laptop_mode = 0 4503 vm.legacy_va_layout = 0 4504 vm.lowmem_reserve_ratio = 256 32 4505 vm.max_map_count = 65530 4506 vm.min_free_kbytes = 3937 4507 vm.mmap_min_addr = 4096 4508 vm.mmap_rnd_bits = 18 4509 vm.mmap_rnd_compat_bits = 11 4510 vm.nr_hugepages = 0 4511 vm.nr_overcommit_hugepages = 0 4512 vm.nr_pdflush_threads = 0 4513 vm.oom_dump_tasks = 1 4514 vm.oom_kill_allocating_task = 0 4515 vm.overcommit_kbytes = 0 4516 vm.overcommit_memory = 0 4517 vm.overcommit_ratio = 50 4518 vm.page-cluster = 0 4519 vm.panic_on_oom = 0 4520 vm.percpu_pagelist_fraction = 0 4521 vm.stat_interval = 1 4522 vm.swappiness = 100 4523 vm.user_reserve_kbytes = 30007 4524 vm.vfs_cache_pressure = 100 4525 vm.watermark_scale_factor = 10 4526 4527 ### ip addr: 4528 4529 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 4530 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 4531 inet XXX.XXX.0.1/8 scope host lo 4532 valid_lft forever preferred_lft forever 4533 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 4534 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 4535 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 4536 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 4537 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 4538 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 4539 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 4540 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 4541 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 4542 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 4543 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 4544 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 4545 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 4546 link/tunnel6 :: brd :: 4547 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 4548 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 4549 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 4550 link/tunnel6 :: brd :: 4551 4552 ### partitions: 4553 4554 major minor #blocks name 4555 4556 179 0 62410752 mmcblk0 4557 179 1 61763584 mmcblk0p1 4558 253 0 494528 zram0 4559 253 1 51200 zram1 4560 4561 ### df: 4562 4563 udev 466M 0 466M 0% /dev 4564 tmpfs 97M 2.1M 95M 3% /run 4565 /dev/mmcblk0p1 58G 6.3G 52G 11% / 4566 tmpfs 483M 0 483M 0% /dev/shm 4567 tmpfs 5.0M 0 5.0M 0% /run/lock 4568 tmpfs 483M 4.0K 483M 1% /tmp 4569 /dev/zram1 47M 6.9M 37M 16% /var/log 4570 4571 ### lsblk: 4572 4573 NAME FSTYPE SIZE MOUNTPOINT UUID 4574 mmcblk0 59.5G 4575 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 4576 zram1 50M /var/log 4577 zram2 0B 4578 4579 ### zramctl: 4580 4581 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 4582 /dev/zram1 lz4 50M 7M 2M 2.4M 4 /var/log 4583 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 4584 4585 ### mtab: 4586 4587 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 4588 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 4589 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 4590 4591 ### mmc0:0001 info: 4592 4593 manfid: 0x0000fe 4594 cid: fe3432534431364720000000690091f5 4595 fwrev: 0x0 4596 csd: 400e00325b590001dc277f800a40008b 4597 ocr: 0x00200000 4598 type: SD 4599 date: 01/2009 4600 hwrev: 0x2 4601 dsr: 0x404 4602 serial: 0x00000069 4603 erase_size: 512 4604 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 4605 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 4606 scr: 0285808300000000 4607 oemid: 0x3432 4608 preferred_erase_size: 4194304 4609 name: SD16G 4610 4611 ### Boot system health: 4612 4613 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 4614 14:17:38 1512 MHz 1.54 23% 11% 10% 0% 1% 0% 51.3 °C 0/5 4615 14:17:39 1512 MHz 1.54 96% 11% 59% 0% 24% 0% 51.3 °C 0/5 4616 14:17:39 1512 MHz 2.29 93% 13% 54% 1% 24% 0% 51.3 °C 0/5 4617 14:17:40 1512 MHz 2.29 86% 10% 54% 2% 19% 0% 49.6 °C 0/5 4618 14:17:40 1512 MHz 2.29 58% 6% 29% 2% 19% 0% 49.6 °C 0/5 4619 4620 ### Activated 1 lzo zram swap devices with 482MB each. 4621 ### Activated Armbian ramlog partition with lz4 compression 4622 4623 Mon Sep 25 02:27:47 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 4624 4625 ### dmesg: 4626 4627 [ 0.000000] Booting Linux on physical CPU 0x0 4628 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 4629 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 4630 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 4631 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 4632 [ 0.000000] On node 0 totalpages: 262144 4633 [ 0.000000] DMA zone: 4096 pages used for memmap 4634 [ 0.000000] DMA zone: 0 pages reserved 4635 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 4636 [ 0.000000] psci: probing for conduit method from DT. 4637 [ 0.000000] psci: PSCIv1.0 detected in firmware. 4638 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 4639 [ 0.000000] psci: Trusted OS migration not required 4640 [ 0.000000] psci: SMC Calling Convention v1.0 4641 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 4642 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 4643 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 4644 [ 0.000000] Detected VIPT I-cache on CPU0 4645 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 4646 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 4647 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 4648 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 4649 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 4650 [ 0.000000] log_buf_len min size: 131072 bytes 4651 [ 0.000000] log_buf_len: 524288 bytes 4652 [ 0.000000] early log buf free: 129352(98%) 4653 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 4654 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 4655 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 4656 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 4657 [ 0.000000] Virtual kernel memory layout: 4658 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 4659 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 4660 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 4661 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 4662 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 4663 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 4664 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 4665 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 4666 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 4667 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 4668 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 4669 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 4670 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 4671 [ 0.000000] Preemptible hierarchical RCU implementation. 4672 [ 0.000000] Build-time adjustment of leaf fanout to 64. 4673 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 4674 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 4675 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 4676 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 4677 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 4678 [ 0.000232] Console: colour dummy device 80x25 4679 [ 0.000248] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 4680 [ 0.000256] pid_max: default: 32768 minimum: 301 4681 [ 0.000453] Security Framework initialized 4682 [ 0.000463] AppArmor: AppArmor disabled by boot time parameter 4683 [ 0.000575] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 4684 [ 0.000581] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 4685 [ 0.001858] sched-energy: CPU device node has no sched-energy-costs 4686 [ 0.001872] Invalid sched_group_energy for CPU0 4687 [ 0.001880] CPU0: update cpu_capacity 1024 4688 [ 0.008940] ASID allocator initialised with 32768 entries 4689 [ 0.027902] BOOTEVENT: 27.887873: ON 4690 [ 0.055885] Detected VIPT I-cache on CPU1 4691 [ 0.055939] Invalid sched_group_energy for CPU1 4692 [ 0.055943] CPU1: update cpu_capacity 1024 4693 [ 0.055946] CPU1: Booted secondary processor [410fd034] 4694 [ 0.079271] Detected VIPT I-cache on CPU2 4695 [ 0.079310] Invalid sched_group_energy for CPU2 4696 [ 0.079313] CPU2: update cpu_capacity 1024 4697 [ 0.079316] CPU2: Booted secondary processor [410fd034] 4698 [ 0.102675] Detected VIPT I-cache on CPU3 4699 [ 0.102709] Invalid sched_group_energy for CPU3 4700 [ 0.102712] CPU3: update cpu_capacity 1024 4701 [ 0.102715] CPU3: Booted secondary processor [410fd034] 4702 [ 0.102795] Brought up 4 CPUs 4703 [ 0.102802] SMP: Total of 4 processors activated. 4704 [ 0.102810] CPU features: detected feature: 32-bit EL0 Support 4705 [ 0.102816] CPU features: detected feature: Kernel page table isolation (KPTI) 4706 [ 0.106582] CPU: All CPU(s) started at EL1 4707 [ 0.106603] alternatives: patching kernel code 4708 [ 0.106779] Invalid sched_group_energy for CPU3 4709 [ 0.106788] CPU3: update max cpu_capacity 1024 4710 [ 0.106794] Invalid sched_group_energy for Cluster3 4711 [ 0.106799] Invalid sched_group_energy for CPU2 4712 [ 0.106805] Invalid sched_group_energy for Cluster2 4713 [ 0.106810] Invalid sched_group_energy for CPU1 4714 [ 0.106816] Invalid sched_group_energy for Cluster1 4715 [ 0.106820] Invalid sched_group_energy for CPU0 4716 [ 0.106826] Invalid sched_group_energy for Cluster0 4717 [ 0.108252] devtmpfs: initialized 4718 [ 0.112691] CPU1: update max cpu_capacity 1024 4719 [ 0.143391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 4720 [ 0.143418] futex hash table entries: 1024 (order: 5, 131072 bytes) 4721 [ 0.144081] xor: measuring software checksum speed 4722 [ 0.176232] 8regs : 1933.200 MB/sec 4723 [ 0.209611] 8regs_prefetch: 1720.800 MB/sec 4724 [ 0.242998] 32regs : 2287.200 MB/sec 4725 [ 0.276385] 32regs_prefetch: 1935.600 MB/sec 4726 [ 0.276391] xor: using function: 32regs (2287.200 MB/sec) 4727 [ 0.276450] atomic64_test: passed 4728 [ 0.276456] pinctrl core: initialized pinctrl subsystem 4729 [ 0.277619] NET: Registered protocol family 16 4730 [ 0.278704] dump_class_init,861, success 4731 [ 0.293114] cpuidle: using governor menu 4732 [ 0.294550] sunxi iommu: irq = 8 4733 [ 0.294876] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 4734 [ 0.294894] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 4735 [ 0.296301] DMA: preallocated 256 KiB pool for atomic allocations 4736 [ 0.297673] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 4737 [ 0.312051] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 4738 [ 0.316005] iommu: Adding device 1c0e000.ve to group 0 4739 [ 0.316524] iommu: Adding device 1c00000.vp9 to group 0 4740 [ 0.327918] iommu: Adding device 1000000.disp to group 0 4741 [ 0.329325] iommu: Adding device 1480000.g2d to group 0 4742 [ 0.332536] iommu: Adding device csi0 to group 0 4743 [ 0.332989] iommu: Adding device csi1 to group 0 4744 [ 0.334193] iommu: Adding device 6600800.vind:scaler@0 to group 0 4745 [ 0.334491] iommu: Adding device 6600800.vind:scaler@1 to group 0 4746 [ 0.334795] iommu: Adding device 6600800.vind:scaler@2 to group 0 4747 [ 0.335085] iommu: Adding device 6600800.vind:scaler@3 to group 0 4748 [ 0.335375] iommu: Adding device 6600800.vind:scaler@4 to group 0 4749 [ 0.335667] iommu: Adding device 6600800.vind:scaler@5 to group 0 4750 [ 0.336601] iommu: Adding device vinc0 to group 0 4751 [ 0.337176] iommu: Adding device vinc1 to group 0 4752 [ 0.338627] iommu: Adding device 1420000.deinterlace to group 0 4753 [ 0.381265] HugeTLB registered 2 MB page size, pre-allocated 0 pages 4754 [ 0.437401] raid6: int64x1 gen() 391 MB/s 4755 [ 0.494198] raid6: int64x1 xor() 362 MB/s 4756 [ 0.551001] raid6: int64x2 gen() 591 MB/s 4757 [ 0.607743] raid6: int64x2 xor() 512 MB/s 4758 [ 0.664516] raid6: int64x4 gen() 840 MB/s 4759 [ 0.721310] raid6: int64x4 xor() 629 MB/s 4760 [ 0.778092] raid6: int64x8 gen() 965 MB/s 4761 [ 0.834848] raid6: int64x8 xor() 655 MB/s 4762 [ 0.891626] raid6: neonx1 gen() 648 MB/s 4763 [ 0.948406] raid6: neonx1 xor() 641 MB/s 4764 [ 1.005173] raid6: neonx2 gen() 976 MB/s 4765 [ 1.061984] raid6: neonx2 xor() 820 MB/s 4766 [ 1.118763] raid6: neonx4 gen() 1287 MB/s 4767 [ 1.175509] raid6: neonx4 xor() 965 MB/s 4768 [ 1.232299] raid6: neonx8 gen() 1324 MB/s 4769 [ 1.289082] raid6: neonx8 xor() 991 MB/s 4770 [ 1.289088] raid6: using algorithm neonx8 gen() 1324 MB/s 4771 [ 1.289093] raid6: .... xor() 991 MB/s, rmw enabled 4772 [ 1.289099] raid6: using intx1 recovery algorithm 4773 [ 1.289234] pwm module init! 4774 [ 1.293531] sunxi-pm debug v3.10 4775 [ 1.294638] SCSI subsystem initialized 4776 [ 1.295261] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 4777 [ 1.295345] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 4778 [ 1.295466] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 4779 [ 1.295982] spi spi0: master is unqueued, this is deprecated 4780 [ 1.296291] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 4781 [ 1.296861] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 4782 [ 1.296943] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 4783 [ 1.297058] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 4784 [ 1.297525] spi spi1: master is unqueued, this is deprecated 4785 [ 1.297869] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 4786 [ 1.298680] usbcore: registered new interface driver usbfs 4787 [ 1.298773] usbcore: registered new interface driver hub 4788 [ 1.298845] usbcore: registered new device driver usb 4789 [ 1.299003] sunxi_i2c_adap_init()2522 - init 4790 [ 1.299574] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 4791 [ 1.299662] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 4792 [ 1.299670] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 4793 [ 1.299685] twi3 supply twi not found, using dummy regulator 4794 [ 1.299761] twi_request_gpio()451 - [i2c3] init name: twi3 4795 [ 1.300506] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 4796 [ 1.300585] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 4797 [ 1.300592] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 4798 [ 1.300606] twi5 supply twi not found, using dummy regulator 4799 [ 1.300685] twi_request_gpio()451 - [i2c5] init name: twi5 4800 [ 1.301170] axp20x-i2c 5-0036: AXP20x variant AXP806 found 4801 [ 1.319867] random: fast init done 4802 [ 1.331019] axp20x-i2c 5-0036: AXP20X driver loaded 4803 [ 1.331548] media: Linux media interface: v0.10 4804 [ 1.331628] Linux video capture interface: v2.00 4805 [ 1.332254] Advanced Linux Sound Architecture Driver Initialized. 4806 [ 1.332978] Bluetooth: Core ver 2.22 4807 [ 1.333045] NET: Registered protocol family 31 4808 [ 1.333051] Bluetooth: HCI device and connection manager initialized 4809 [ 1.333066] Bluetooth: HCI socket layer initialized 4810 [ 1.333078] Bluetooth: L2CAP socket layer initialized 4811 [ 1.333117] Bluetooth: SCO socket layer initialized 4812 [ 1.333961] [DISP]disp_module_init 4813 [ 1.335211] [DISP] parser_disp_init_para,line:1403: 4814 [ 1.335219] of_property_read fb0_width fail 4815 [ 1.335231] [DISP] disp_init,line:2215: 4816 [ 1.335237] smooth display screen:0 type:4 mode:10 4817 [ 1.352707] [DISP]disp_module_init finish 4818 [ 1.353576] clocksource: Switched to clocksource arch_sys_counter 4819 [ 1.353836] VFS: Disk quotas dquot_6.6.0 4820 [ 1.353924] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 4821 [ 1.354663] Console: switching to colour frame buffer device 240x67 4822 [ 1.398069] NET: Registered protocol family 2 4823 [ 1.398194] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 4824 [ 1.420504] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 4825 [ 1.420578] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 4826 [ 1.420700] TCP: Hash tables configured (established 8192 bind 8192) 4827 [ 1.420788] UDP hash table entries: 512 (order: 2, 16384 bytes) 4828 [ 1.420816] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 4829 [ 1.421140] NET: Registered protocol family 1 4830 [ 1.421730] RPC: Registered named UNIX socket transport module. 4831 [ 1.421735] RPC: Registered udp transport module. 4832 [ 1.421738] RPC: Registered tcp transport module. 4833 [ 1.421741] RPC: Registered tcp NFSv4.1 backchannel transport module. 4834 [ 1.421982] Trying to unpack rootfs image as initramfs... 4835 [ 2.176299] Freeing initrd memory: 17256K 4836 [ 2.177391] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 4837 [ 2.181283] audit: initializing netlink subsys (disabled) 4838 [ 2.181341] audit: type=2000 audit(2.176:1): initialized 4839 [ 2.182247] workingset: timestamp_bits=45 max_order=18 bucket_order=0 4840 [ 2.193379] DLM installed 4841 [ 2.195253] squashfs: version 4.0 (2009/01/31) Phillip Lougher 4842 [ 2.195608] Registering sdcardfs 0.1 4843 [ 2.196095] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 4844 [ 2.197649] ntfs: driver 2.1.32 [Flags: R/W]. 4845 [ 2.204503] NET: Registered protocol family 38 4846 [ 2.204869] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 4847 [ 2.205012] io scheduler noop registered 4848 [ 2.205021] io scheduler deadline registered 4849 [ 2.205187] io scheduler cfq registered (default) 4850 [ 2.207065] failed to get easy_light_used assign 4851 [ 2.207077] failed to get normal led pin assign 4852 [ 2.207082] failed to get standby led pin assign 4853 [ 2.207087] failed to get standby led pin assign 4854 [ 2.207093] these is zero number for gpio 4855 [ 2.207097] gpio_init finish with uesd 4856 [ 2.210188] uart uart0: get regulator failed 4857 [ 2.210559] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 4858 [ 2.210585] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 4859 [ 2.210703] console [ttyS0] enabled 4860 [ 2.211592] uart uart1: get regulator failed 4861 [ 2.211786] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 4862 [ 2.212494] uart uart5: get regulator failed 4863 [ 2.212677] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 4864 [ 2.213975] misc dump reg init 4865 [ 2.215108] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 4866 [ 2.215446] Unable to detect cache hierarchy for CPU 0 4867 [ 2.229903] brd: module loaded 4868 [ 2.238374] loop: module loaded 4869 [ 2.238564] [NAND][NE] Not found valid nand node on dts 4870 [ 2.239152] Get boot type cmd line fail 4871 [ 2.239735] sunxi-bt soc@03000000:bt: Missing bt_power. 4872 [ 2.239746] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 4873 [ 2.239753] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 4874 [ 2.239760] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 4875 [ 2.239815] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 4876 [ 2.239885] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 4877 [ 2.240792] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 4878 [ 2.240804] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 4879 [ 2.240812] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 4880 [ 2.240819] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 4881 [ 2.240826] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 4882 [ 2.240858] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 4883 [ 2.240891] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 4884 [ 2.240899] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 4885 [ 2.240916] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 4886 [ 2.241850] [ADDR_MGT] addr_mgt_probe: success. 4887 [ 2.248669] tun: Universal TUN/TAP device driver, 1.6 4888 [ 2.248681] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 4889 [ 2.250720] gmac-power0: NULL 4890 [ 2.250730] gmac-power1: NULL 4891 [ 2.250736] gmac-power2: NULL 4892 [ 2.251659] PPP generic driver version 2.4.2 4893 [ 2.251945] PPP BSD Compression module registered 4894 [ 2.251954] PPP Deflate Compression module registered 4895 [ 2.251980] PPP MPPE Compression module registered 4896 [ 2.251989] NET: Registered protocol family 24 4897 [ 2.252024] PPTP driver version 0.8.5 4898 [ 2.252376] usbcore: registered new interface driver r8152 4899 [ 2.252452] usbcore: registered new interface driver asix 4900 [ 2.252547] usbcore: registered new interface driver ax88179_178a 4901 [ 2.252621] usbcore: registered new interface driver cdc_ether 4902 [ 2.252683] usbcore: registered new interface driver net1080 4903 [ 2.252751] usbcore: registered new interface driver cdc_subset 4904 [ 2.252812] usbcore: registered new interface driver zaurus 4905 [ 2.252897] usbcore: registered new interface driver cdc_ncm 4906 [ 2.252904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 4907 [ 2.253270] get drv_vbus is fail, 84 4908 [ 2.253279] get ehci0-controller, regulator_io is no nocare 4909 [ 2.253543] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 4910 [ 2.253549] [sunxi-ehci0]: Not init ehci0 4911 [ 2.253781] get ehci1-controller, regulator_io is no nocare 4912 [ 2.253992] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 4913 [ 2.254050] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4914 [ 2.254077] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 4915 [ 2.254622] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 4916 [ 2.266929] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 4917 [ 2.267218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 4918 [ 2.267227] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4919 [ 2.267235] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4920 [ 2.267242] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 4921 [ 2.267249] usb usb1: SerialNumber: sunxi-ehci 4922 [ 2.268117] hub 1-0:1.0: USB hub found 4923 [ 2.268163] hub 1-0:1.0: 1 port detected 4924 [ 2.268836] get drv_vbus is fail, 84 4925 [ 2.268844] get ehci2-controller, regulator_io is no nocare 4926 [ 2.269091] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 4927 [ 2.269143] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4928 [ 2.269169] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 4929 [ 2.269444] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 4930 [ 2.280267] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 4931 [ 2.280504] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 4932 [ 2.280513] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4933 [ 2.280520] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4934 [ 2.280527] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 4935 [ 2.280534] usb usb2: SerialNumber: sunxi-ehci 4936 [ 2.281378] hub 2-0:1.0: USB hub found 4937 [ 2.281421] hub 2-0:1.0: 1 port detected 4938 [ 2.282089] get drv_vbus is fail, 84 4939 [ 2.282097] get ehci3-controller, regulator_io is no nocare 4940 [ 2.282342] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 4941 [ 2.282405] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4942 [ 2.282431] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 4943 [ 2.282717] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 4944 [ 2.293595] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 4945 [ 2.293782] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 4946 [ 2.293791] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4947 [ 2.293799] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4948 [ 2.293806] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 4949 [ 2.293813] usb usb3: SerialNumber: sunxi-ehci 4950 [ 2.294681] hub 3-0:1.0: USB hub found 4951 [ 2.294727] hub 3-0:1.0: 1 port detected 4952 [ 2.295653] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 4953 [ 2.296022] get drv_vbus is fail, 84 4954 [ 2.296030] get ohci0-controller, regulator_io is no nocare 4955 [ 2.296362] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 4956 [ 2.296367] [sunxi-ohci0]: Not init ohci0 4957 [ 2.296487] get ohci1-controller, regulator_io is no nocare 4958 [ 2.296652] hci: request ohci1-controller gpio:80 4959 [ 2.296729] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 4960 [ 2.296780] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 4961 [ 2.296806] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 4962 [ 2.296885] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 4963 [ 2.357785] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 4964 [ 2.357797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4965 [ 2.357804] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 4966 [ 2.357811] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 4967 [ 2.357818] usb usb4: SerialNumber: sunxi-ohci 4968 [ 2.358708] hub 4-0:1.0: USB hub found 4969 [ 2.358756] hub 4-0:1.0: 1 port detected 4970 [ 2.359439] get drv_vbus is fail, 84 4971 [ 2.359447] get ohci2-controller, regulator_io is no nocare 4972 [ 2.359782] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 4973 [ 2.359832] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 4974 [ 2.359858] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 4975 [ 2.359935] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 4976 [ 2.417759] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 4977 [ 2.417769] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4978 [ 2.417777] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 4979 [ 2.417784] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 4980 [ 2.417791] usb usb5: SerialNumber: sunxi-ohci 4981 [ 2.418665] hub 5-0:1.0: USB hub found 4982 [ 2.418712] hub 5-0:1.0: 1 port detected 4983 [ 2.419383] get drv_vbus is fail, 84 4984 [ 2.419391] get ohci3-controller, regulator_io is no nocare 4985 [ 2.419729] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 4986 [ 2.419779] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 4987 [ 2.419808] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 4988 [ 2.419885] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 4989 [ 2.477754] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 4990 [ 2.477764] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4991 [ 2.477771] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 4992 [ 2.477779] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 4993 [ 2.477785] usb usb6: SerialNumber: sunxi-ohci 4994 [ 2.478632] hub 6-0:1.0: USB hub found 4995 [ 2.478678] hub 6-0:1.0: 1 port detected 4996 [ 2.479616] ohci-platform: OHCI generic platform driver 4997 [ 2.480358] usbcore: registered new interface driver uas 4998 [ 2.480526] usbcore: registered new interface driver usb-storage 4999 [ 2.480618] usbcore: registered new interface driver ums-alauda 5000 [ 2.480699] usbcore: registered new interface driver ums-cypress 5001 [ 2.480772] usbcore: registered new interface driver ums-datafab 5002 [ 2.480840] usbcore: registered new interface driver ums_eneub6250 5003 [ 2.480914] usbcore: registered new interface driver ums-freecom 5004 [ 2.480988] usbcore: registered new interface driver ums-isd200 5005 [ 2.481057] usbcore: registered new interface driver ums-jumpshot 5006 [ 2.481127] usbcore: registered new interface driver ums-karma 5007 [ 2.481196] usbcore: registered new interface driver ums-onetouch 5008 [ 2.481293] usbcore: registered new interface driver ums-realtek 5009 [ 2.481375] usbcore: registered new interface driver ums-sddr09 5010 [ 2.481456] usbcore: registered new interface driver ums-sddr55 5011 [ 2.481530] usbcore: registered new interface driver ums-usbat 5012 [ 2.481679] usb_serial_number:20080411 5013 [ 2.482917] input: sunxi-keyboard as /devices/virtual/input/input0 5014 [ 2.483538] usbcore: registered new interface driver xpad 5015 [ 2.483708] usbcore: registered new interface driver usb_acecad 5016 [ 2.483807] usbcore: registered new interface driver aiptek 5017 [ 2.483894] usbcore: registered new interface driver gtco 5018 [ 2.483974] usbcore: registered new interface driver hanwang 5019 [ 2.484055] usbcore: registered new interface driver kbtab 5020 [ 2.484523] axp2101_pek: axp2101-pek can not register without irq 5021 [ 2.484545] axp2101-pek: probe of axp2101-pek.0 failed with error -22 5022 [ 2.485934] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 5023 [ 2.486005] sunxi-rtc rtc: RTC enabled 5024 [ 2.486472] i2c /dev entries driver 5025 [ 2.487521] lirc_dev: IR Remote Control driver registered, major 244 5026 [ 2.487532] IR NEC protocol handler initialized 5027 [ 2.487538] IR RC5(x/sz) protocol handler initialized 5028 [ 2.487544] IR RC6 protocol handler initialized 5029 [ 2.487550] IR JVC protocol handler initialized 5030 [ 2.487555] IR Sony protocol handler initialized 5031 [ 2.487561] IR SANYO protocol handler initialized 5032 [ 2.487567] IR Sharp protocol handler initialized 5033 [ 2.487573] IR MCE Keyboard/mouse protocol handler initialized 5034 [ 2.487578] IR LIRC bridge handler initialized 5035 [ 2.487584] IR XMP protocol handler initialized 5036 [ 2.488107] sunxi_ir_startup: get ir protocol failed 5037 [ 2.488149] 7040000.s_cir supply ir0 not found, using dummy regulator 5038 [ 2.488335] Registered IR keymap rc_map_sunxi 5039 [ 2.488734] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 5040 [ 2.488964] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 5041 [ 2.489991] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 5042 [ 2.490615] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 5043 [ 2.491320] sunxi cedar version 0.1 5044 [ 2.491509] VE: install start!!! 5045 5046 [ 2.491695] cedar_ve: cedar-ve the get irq is 278 5047 [ 2.492315] VE: get debugfs_mpp_root is NULL, please check mpp 5048 5049 [ 2.492328] VE: sunxi ve debug register driver failed! 5050 5051 [ 2.495523] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 5052 [ 2.496822] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 5053 [ 2.497216] Bluetooth: HCI UART driver ver 2.3 5054 [ 2.497227] Bluetooth: HCI UART protocol H4 registered 5055 [ 2.497233] Bluetooth: HCI UART protocol LL registered 5056 [ 2.497238] Bluetooth: HCI UART protocol Three-wire (H5) registered 5057 [ 2.501443] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 5058 [ 2.501460] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 5059 [ 2.501473] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 5060 [ 2.501485] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 5061 [ 2.501497] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 5062 [ 2.501509] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 5063 [ 2.501919] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 5064 [ 2.502028] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 5065 [ 2.502231] sunxi-mmc sdc0: No vmmc regulator found 5066 [ 2.502238] sunxi-mmc sdc0: No vqmmc regulator found 5067 [ 2.502244] sunxi-mmc sdc0: No vdmmc regulator found 5068 [ 2.502250] sunxi-mmc sdc0: No vd33sw regulator found 5069 [ 2.502257] sunxi-mmc sdc0: No vd18sw regulator found 5070 [ 2.502263] sunxi-mmc sdc0: No vq33sw regulator found 5071 [ 2.502269] sunxi-mmc sdc0: No vq18sw regulator found 5072 [ 2.502988] sunxi-mmc sdc0: set host busy 5073 [ 2.503089] sunxi-mmc sdc0: Got CD GPIO 5074 [ 2.503446] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 5075 [ 2.503481] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 5076 [ 2.516936] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5077 [ 2.537167] sunxi-mmc sdc0: detmode:gpio irq 5078 [ 2.537198] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5079 [ 2.539695] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5080 [ 2.541065] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 5081 [ 2.541206] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 5082 [ 2.541347] sunxi-mmc sdc1: No vmmc regulator found 5083 [ 2.541353] sunxi-mmc sdc1: No vqmmc regulator found 5084 [ 2.541360] sunxi-mmc sdc1: No vdmmc regulator found 5085 [ 2.541366] sunxi-mmc sdc1: No vd33sw regulator found 5086 [ 2.541372] sunxi-mmc sdc1: No vd18sw regulator found 5087 [ 2.541378] sunxi-mmc sdc1: No vq33sw regulator found 5088 [ 2.541384] sunxi-mmc sdc1: No vq18sw regulator found 5089 [ 2.541756] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5090 [ 2.542140] sunxi-mmc sdc1: set host busy 5091 [ 2.542223] mmc:failed to get gpios 5092 [ 2.542515] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 5093 [ 2.544240] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5094 [ 2.556988] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5095 [ 2.567590] mmc0: host does not support reading read-only switch, assuming write-enable 5096 [ 2.569443] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 5097 [ 2.569513] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 5098 [ 2.569656] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 5099 [ 2.569747] mmc0: new high speed SDXC card at address 0001 5100 [ 2.570802] mmcblk0: mmc0:0001 SD16G 59.5 GiB 5101 [ 2.572337] mmcblk0: p1 5102 [ 2.573637] sunxi-mmc sdc1: detmode:manually by software 5103 [ 2.576045] ledtrig-cpu: registered to indicate activity on CPUs 5104 [ 2.576546] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 5105 [ 2.577391] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 5106 [ 2.577425] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5107 [ 2.579918] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5108 [ 2.581843] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 5109 [ 2.582681] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 5110 [ 2.583518] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 5111 [ 2.584356] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 5112 [ 2.584394] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 5113 [ 2.584398] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 5114 [ 2.584402] sunxi_emce_probe()590emce hw init failed! 5115 [ 2.584429] emce: probe of emce failed with error -2 5116 [ 2.584698] hidraw: raw HID events driver (C) Jiri Kosina 5117 [ 2.589321] usbcore: registered new interface driver usbhid 5118 [ 2.589329] usbhid: USB HID core driver 5119 [ 2.590831] optee: probing for conduit method from DT. 5120 [ 2.590844] optee: api uid mismatch 5121 [ 2.591387] usbcore: registered new interface driver snd-usb-audio 5122 [ 2.592969] [sunxi_hdmi_codec_init] driver and deivce register finished. 5123 [ 2.594731] [sunxi_internal_codec_probe]:get audio avcc failed 5124 [ 2.594772] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 5125 [ 2.595003] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 5126 [ 2.597532] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 5127 [ 2.599510] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 5128 [ 2.599523] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 5129 [ 2.601936] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 5130 [ 2.601959] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 5131 [ 2.606020] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 5132 [ 2.607650] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 5133 [ 2.609571] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 5134 [ 2.612620] pktgen: Packet Generator for packet performance testing. Version: 2.75 5135 [ 2.613063] u32 classifier 5136 [ 2.613070] Actions configured 5137 [ 2.613084] Netfilter messages via NETLINK v0.30. 5138 [ 2.613112] nfnl_acct: registering with nfnetlink. 5139 [ 2.613436] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 5140 [ 2.613748] ctnetlink v0.93: registering with nfnetlink. 5141 [ 2.614517] xt_time: kernel timezone is -0000 5142 [ 2.614541] IPVS: Registered protocols (TCP, UDP) 5143 [ 2.614649] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 5144 [ 2.614777] IPVS: Creating netns size=1928 id=0 5145 [ 2.614915] IPVS: ipvs loaded. 5146 [ 2.614923] IPVS: [rr] scheduler registered. 5147 [ 2.615020] ipip: IPv4 and MPLS over IPv4 tunneling driver 5148 [ 2.615732] gre: GRE over IPv4 demultiplexor driver 5149 [ 2.615741] ip_gre: GRE over IPv4 tunneling driver 5150 [ 2.617217] IPv4 over IPsec tunneling driver 5151 [ 2.618081] ip_tables: (C) 2000-2006 Netfilter Core Team 5152 [ 2.618374] arp_tables: arp_tables: (C) 2002 David S. Miller 5153 [ 2.618439] Initializing XFRM netlink socket 5154 [ 2.618473] IPsec XFRM device driver 5155 [ 2.619316] NET: Registered protocol family 10 5156 [ 2.621244] mip6: Mobile IPv6 5157 [ 2.621282] ip6_tables: (C) 2000-2006 Netfilter Core Team 5158 [ 2.622597] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 5159 [ 2.624303] NET: Registered protocol family 17 5160 [ 2.624344] NET: Registered protocol family 15 5161 [ 2.624512] Bridge firewalling registered 5162 [ 2.624645] Bluetooth: RFCOMM TTY layer initialized 5163 [ 2.624662] Bluetooth: RFCOMM socket layer initialized 5164 [ 2.624692] Bluetooth: RFCOMM ver 1.11 5165 [ 2.624706] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 5166 [ 2.624711] Bluetooth: BNEP filters: protocol multicast 5167 [ 2.624725] Bluetooth: BNEP socket layer initialized 5168 [ 2.624730] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 5169 [ 2.624742] Bluetooth: HIDP socket layer initialized 5170 [ 2.624829] l2tp_core: L2TP core driver, V2.0 5171 [ 2.624843] l2tp_ppp: PPPoL2TP kernel driver, V2.0 5172 [ 2.624849] 8021q: 802.1Q VLAN Support v1.8 5173 [ 2.625048] sctp: Hash tables configured (bind 256/256) 5174 [ 2.625633] Key type dns_resolver registered 5175 [ 2.625774] Registered cp15_barrier emulation handler 5176 [ 2.625790] Registered setend emulation handler 5177 [ 2.626760] registered taskstats version 1 5178 [ 2.638328] zswap: default zpool zbud not available 5179 [ 2.638336] zswap: pool creation failed 5180 [ 2.641182] Btrfs loaded, crc32c=crc32c-arm64-hw 5181 [ 2.641924] HDMI 2.0 driver init start! 5182 [ 2.641939] boot_hdmi=true 5183 [ 2.642724] Can not find the node of esm 5184 [ 2.642744] ERROR: pinctrl_get for HDMI2.0 DDC fail 5185 [ 2.642832] Get hdmi_power0:vcc-hdmi 5186 [ 2.642873] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 5187 [ 2.643061] Get hdmi_power1:vdd-hdmi 5188 [ 2.643085] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 5189 [ 2.644764] hdmi_cec_init 5190 [ 2.645234] [DISP] disp_device_attached,line:146: 5191 [ 2.645243] attached ok, mgr0<-->device0, type=4 5192 [ 2.645254] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 5193 [ 2.645265] [DISP] disp_hdmi_set_mode,line:648: 5194 [ 2.645270] hdmi_set_mode is null! 5195 [ 2.647260] HDMI2.0 module init end 5196 [ 2.658460] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 5197 [ 2.661895] cpu cpu1: opp_list_debug_create_link: Failed to create link 5198 [ 2.661907] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 5199 [ 2.661938] cpu cpu2: opp_list_debug_create_link: Failed to create link 5200 [ 2.661946] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 5201 [ 2.661976] cpu cpu3: opp_list_debug_create_link: Failed to create link 5202 [ 2.661983] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 5203 [ 2.664324] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 5204 [ 2.665265] get det_vbus is fail, 84 5205 [ 2.665272] get id is fail, 84 5206 [ 2.665750] sunxi-rtc rtc: setting system clock to 1970-01-01 00:10:40 UTC (640) 5207 [ 2.669552] ALSA device list: 5208 [ 2.669560] #0: audiocodec 5209 [ 2.669564] #1: sndahub 5210 [ 2.669568] #2: sndhdmi 5211 [ 2.671225] Freeing unused kernel memory: 3008K 5212 [ 2.716495] random: systemd-udevd: uninitialized urandom read (16 bytes read) 5213 [ 2.718640] random: systemd-udevd: uninitialized urandom read (16 bytes read) 5214 [ 2.721557] random: systemd-udevd: uninitialized urandom read (16 bytes read) 5215 [ 2.790590] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 5216 [ 2.957015] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 5217 [ 3.050291] HDMI cable is connected 5218 [ 3.310321] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 5219 [ 3.530364] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 5220 [ 3.530373] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 5221 [ 3.530378] usb 4-1: Product: Rapoo 2.4G Wireless Device 5222 [ 3.530383] usb 4-1: Manufacturer: RAPOO 5223 [ 3.538164] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 5224 [ 3.538556] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 5225 [ 3.544172] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 5226 [ 3.601540] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 5227 [ 3.605612] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 5228 [ 3.662259] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 5229 [ 4.184305] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 5230 [ 5.107278] systemd[1]: System time before build time, advancing clock. 5231 [ 5.111989] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 5232 [ 5.112548] cgroup: cgroup2: unknown option "nsdelegate" 5233 [ 5.132864] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 5234 [ 5.132888] systemd[1]: Detected architecture arm64. 5235 [ 5.134059] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 5236 [ 5.144226] systemd[1]: Hostname set to <opi>. 5237 [ 5.171708] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 5238 [ 6.785192] (sd-execut[1457]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 5239 [ 6.827008] 5240 insmod_device_driver 5241 5242 [ 6.827282] device_chose finished 124! 5243 [ 7.151137] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 5244 [ 7.389532] systemd[1]: Queued start job for default target graphical.target. 5245 [ 7.396979] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 5246 [ 7.399185] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 5247 [ 7.401496] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 5248 [ 7.402807] systemd[1]: Created slice user.slice - User and Session Slice. 5249 [ 7.403444] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 5250 [ 7.404067] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 5251 [ 7.404407] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 5252 [ 7.404970] systemd[1]: Reached target slices.target - Slice Units. 5253 [ 7.405321] systemd[1]: Reached target swap.target - Swaps. 5254 [ 7.405576] systemd[1]: Reached target time-set.target - System Time Set. 5255 [ 7.406053] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 5256 [ 7.423447] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 5257 [ 7.424620] systemd[1]: Listening on syslog.socket - Syslog Socket. 5258 [ 7.425513] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 5259 [ 7.426148] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 5260 [ 7.427828] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 5261 [ 7.428788] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 5262 [ 7.429848] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 5263 [ 7.432086] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 5264 [ 7.432982] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 5265 [ 7.437017] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 5266 [ 7.441506] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 5267 [ 7.446652] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 5268 [ 7.447895] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 5269 [ 7.448829] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 5270 [ 7.456252] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 5271 [ 7.461856] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 5272 [ 7.467672] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 5273 [ 7.475944] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 5274 [ 7.482378] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 5275 [ 7.497854] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 5276 [ 7.505020] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 5277 [ 7.513050] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 5278 [ 7.520455] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 5279 [ 7.521688] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 5280 [ 7.530978] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 5281 [ 7.537310] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 5282 [ 7.542303] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 5283 [ 7.552627] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 5284 [ 7.554939] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 5285 [ 7.557337] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 5286 [ 7.559936] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 5287 [ 7.563508] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 5288 [ 7.567852] systemd[1]: modprobe@configfs.service: Deactivated successfully. 5289 [ 7.568459] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 5290 [ 7.571252] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 5291 [ 7.572800] fuse init (API version 7.26) 5292 [ 7.613687] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 5293 [ 7.617515] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 5294 [ 7.622990] systemd[1]: modprobe@drm.service: Deactivated successfully. 5295 [ 7.623514] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 5296 [ 7.625599] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 5297 [ 7.626142] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 5298 [ 7.628359] systemd[1]: modprobe@fuse.service: Deactivated successfully. 5299 [ 7.628905] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 5300 [ 7.631043] systemd[1]: modprobe@loop.service: Deactivated successfully. 5301 [ 7.631176] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 5302 [ 7.631706] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 5303 [ 7.634441] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 5304 [ 7.642017] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 5305 [ 7.647591] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 5306 [ 7.648414] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 5307 [ 7.648423] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 5308 [ 7.648613] spidev spi1.1: Deleting spi1.1 5309 [ 7.649260] fbtft_device: GPIOS used by 'fb_st7735r': 5310 [ 7.649268] fbtft_device: 'reset' = GPIO73 5311 [ 7.649272] fbtft_device: 'dc' = GPIO70 5312 [ 7.649284] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 5313 [ 7.649290] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 5314 [ 7.687336] WCN: marlin_init entry! 5315 [ 7.688479] WCN: marlin_parse_dt reset gpio=211 5316 [ 7.688490] WCN_ERR: gpio reset request err: 211 5317 [ 7.688496] WCN: wcn config bt wake host 5318 [ 7.689006] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 5319 [ 7.689225] WCN: wcn config wifi wake host 5320 [ 7.689248] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 5321 [ 7.692552] sdiohal:sdiohal_init ok 5322 [ 7.693427] WCN: marlin_probe ok! 5323 [ 7.702198] mtty_probe init device addr: 0xffffffc03b74c000 5324 [ 7.702415] -->rfkill_bluetooth_init 5325 [ 7.702606] <--rfkill_bluetooth_init 5326 [ 7.745836] WCN: start_marlin [MARLIN_WIFI] 5327 [ 7.745849] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 5328 [ 7.745853] WCN: the first power on start 5329 [ 7.766598] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 5330 [ 7.767360] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 5331 [ 7.773105] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 5332 [ 7.773959] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 5333 [ 7.780312] systemd[1]: Starting systemd-sysusers.service - Create System Users... 5334 [ 7.788980] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 5335 [ 7.801249] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 5336 [ 7.803813] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 5337 [ 7.859166] systemd[1]: Finished systemd-sysusers.service - Create System Users. 5338 [ 7.860302] WCN: marlin chip en pull up 5339 [ 7.865715] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 5340 [ 7.886985] sdiohal:sdiohal_scan_card 5341 [ 7.887008] sunxi-wlan soc@03000000:wlan: bus_index: 1 5342 [ 7.887335] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 5343 [ 7.903713] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5344 [ 7.921174] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 5345 [ 7.922022] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 5346 [ 7.922042] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5347 [ 7.924568] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5348 [ 7.927805] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5349 [ 7.943663] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5350 [ 7.954915] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 5351 [ 7.955678] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 5352 [ 7.955761] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 5353 [ 7.956446] mmc1: new ultra high speed SDR104 SDIO card at address 8800 5354 [ 7.957308] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 5355 [ 7.957495] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 5356 [ 7.957518] WCN: marlin_scan_finish! 5357 [ 7.957522] sdiohal:probe ok 5358 [ 7.957533] sdiohal:scan end! 5359 [ 7.957539] WCN: then marlin start to download 5360 [ 7.957569] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 5361 [ 7.970097] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 5362 [ 7.972015] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 5363 [ 7.977767] systemd[1]: Mounting tmp.mount - /tmp... 5364 [ 7.984217] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 5365 [ 8.000771] systemd[1]: Mounted tmp.mount - /tmp. 5366 [ 8.003318] systemd[1]: Reached target local-fs.target - Local File Systems. 5367 [ 8.008578] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 5368 [ 8.013818] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 5369 [ 8.019504] systemd[1]: Starting console-setup.service - Set console font and keymap... 5370 [ 8.024942] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 5371 [ 8.040209] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 5372 [ 8.047139] systemd[1]: Starting ufw.service - Uncomplicated firewall... 5373 [ 8.051022] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 5374 [ 8.084374] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 5375 [ 8.092187] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 5376 [ 8.100670] systemd[1]: Finished console-setup.service - Set console font and keymap. 5377 [ 8.103043] systemd[1]: Received SIGRTMIN+20 from PID 1420 (plymouthd). 5378 [ 8.147246] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 5379 [ 8.153190] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 5380 [ 8.154607] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 5381 [ 8.155638] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 5382 [ 8.160081] systemd[1]: Finished ufw.service - Uncomplicated firewall. 5383 [ 8.177515] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 5384 [ 8.180109] systemd[1]: Reached target network-pre.target - Preparation for Network. 5385 [ 8.210840] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 5386 [ 8.451940] zram: Added device: zram0 5387 [ 8.452691] zram: Added device: zram1 5388 [ 8.453473] zram: Added device: zram2 5389 [ 8.485148] zswap: can't enable, initialization failed 5390 [ 8.531886] zram0: detected capacity change from 0 to 506396672 5391 [ 8.533302] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 5392 [ 8.547536] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 5393 [ 8.609483] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 5394 [ 8.615789] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 5395 [ 8.618153] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 5396 [ 8.618996] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 5397 [ 8.619587] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 5398 [ 8.987033] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 5399 [ 9.661041] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 5400 [ 9.697069] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 5401 [ 9.909975] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 5402 [ 10.000388] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 5403 [ 10.482601] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 5404 [ 10.482810] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 5405 [ 10.483353] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 5406 [ 10.496267] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 5407 [ 10.507236] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 5408 [ 10.515133] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 5409 [ 10.523273] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 5410 [ 10.532717] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 5411 [ 10.533541] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 5412 [ 10.540494] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 5413 [ 10.541319] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 5414 [ 10.544077] systemd[1]: modprobe@loop.service: Deactivated successfully. 5415 [ 10.547054] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 5416 [ 10.549615] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 5417 [ 10.549951] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 5418 [ 10.610953] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 5419 [ 10.612020] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 5420 [ 10.619382] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 5421 [ 10.631739] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 5422 [ 10.676370] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 5423 [ 10.723858] sunxi-bt soc@03000000:bt: block state already is 1 5424 [ 10.729174] bluetooth_set_power: start_block=1 5425 [ 10.866278] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 5426 [ 10.872162] systemd[1]: Starting brltty.service - Braille Device Support... 5427 [ 11.013680] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 5428 [ 11.574902] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 5429 [ 11.595538] systemd[1]: Started brltty.service - Braille Device Support. 5430 [ 11.611377] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 5431 [ 11.742636] zram1: detected capacity change from 0 to 52428800 5432 [ 12.026952] WCN_ERR: btwifi_download_firmware request firmware error 5433 [ 15.819983] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 5434 [ 15.826001] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 5435 [ 15.888604] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 5436 [ 19.668573] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 5437 [ 19.674901] systemd[1]: Starting systemd-journald.service - Journal Service... 5438 [ 19.948113] systemd-journald[1838]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.1 (1656 of 2204 items, 1269760 file size, 766 bytes per hash table item), suggesting rotation. 5439 [ 19.948134] systemd-journald[1838]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 5440 [ 19.951727] systemd[1]: Started systemd-journald.service - Journal Service. 5441 [ 19.998127] systemd-journald[1838]: Received client request to flush runtime journal. 5442 [ 20.253092] IPVS: Creating netns size=1928 id=1 5443 [ 21.264355] random: crng init done 5444 [ 21.264368] random: 7 urandom warning(s) missed due to ratelimiting 5445 [ 38.880315] WCN_ERR: marlin download timeout 5446 [ 38.880327] sdiohal:sdiohal_runtime_put entry 5447 [ 38.880443] sdiohal:sdiohal_runtime_put wait xmit_cnt end 5448 [ 38.880492] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0 5449 [ 38.880500] bluetooth_set_power: end_block=1 5450 [ 38.891587] sdiohal err:sdiohal_adma_pt_write xmit_cnt:0 xmit_start:0,not have card 5451 [ 38.891609] sdiohal err:sdiohal_aon_writeb xmit_cnt:0 xmit_start:0,not have card 5452 [ 38.891613] sdiohal err:sdiohal_aon_writeb xmit_cnt:0 xmit_start:0,not have card 5453 [ 42.086720] unisoc_wifi: probe of unisoc_wifi failed with error -1 5454 5455 ### armbian-release: 5456 5457 # PLEASE DO NOT EDIT THIS FILE 5458 BOARD=orangepizero2 5459 BOARD_NAME="Orange Pi Zero2" 5460 BOARDFAMILY=sun50iw9 5461 BUILD_REPOSITORY_URL=https://github.com/armbian/build 5462 BUILD_REPOSITORY_COMMIT=ac829eb6 5463 LINUXFAMILY=sun50iw9 5464 ARCH=arm64 5465 IMAGE_TYPE=stable 5466 BOARD_TYPE=conf 5467 INITRD_ARCH=arm 5468 KERNEL_IMAGE_TYPE=Image 5469 FORCE_BOOTSCRIPT_UPDATE=yes 5470 VENDOR=Armbian 5471 BOOTSCRIPT_FORCE_UPDATE="yes" 5472 BOOTSCRIPT_DST="boot.cmd" 5473 VERSION=23.8.1 5474 REVISION=23.8.1 5475 BRANCH=legacy 5476 5477 ### boot environment: 5478 5479 verbosity=1 5480 console=serial 5481 #disp_mode=1080p60 5482 #fb0_width=1280 5483 #fb0_height=720 5484 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 5485 rootfstype=ext4 5486 overlays=spi-spidev 5487 param_spidev_spi_bus=1 5488 param_spidev_spi_cs=1 5489 extraargs=fbcon=map:1 5490 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 5491 5492 ### lsusb: 5493 5494 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 5495 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 5496 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 5497 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 5498 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 5499 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 5500 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 5501 5502 ### lscpu: 5503 5504 Architecture: aarch64 5505 CPU op-mode(s): 32-bit, 64-bit 5506 Byte Order: Little Endian 5507 CPU(s): 4 5508 On-line CPU(s) list: 0-3 5509 Vendor ID: ARM 5510 Model name: Cortex-A53 5511 Model: 4 5512 Thread(s) per core: 1 5513 Core(s) per cluster: 4 5514 Socket(s): - 5515 Cluster(s): 1 5516 Stepping: r0p4 5517 CPU(s) scaling MHz: 100% 5518 CPU max MHz: 1512.0000 5519 CPU min MHz: 480.0000 5520 BogoMIPS: 48.00 5521 Flags: fp asimd aes pmull sha1 sha2 crc32 5522 5523 ### cpuinfo: 5524 5525 processor : 0 5526 BogoMIPS : 48.00 5527 Features : fp asimd aes pmull sha1 sha2 crc32 5528 CPU implementer : 0x41 5529 CPU architecture: 8 5530 CPU variant : 0x0 5531 CPU part : 0xd03 5532 CPU revision : 4 5533 5534 processor : 1 5535 BogoMIPS : 48.00 5536 Features : fp asimd aes pmull sha1 sha2 crc32 5537 CPU implementer : 0x41 5538 CPU architecture: 8 5539 CPU variant : 0x0 5540 CPU part : 0xd03 5541 CPU revision : 4 5542 5543 processor : 2 5544 BogoMIPS : 48.00 5545 Features : fp asimd aes pmull sha1 sha2 crc32 5546 CPU implementer : 0x41 5547 CPU architecture: 8 5548 CPU variant : 0x0 5549 CPU part : 0xd03 5550 CPU revision : 4 5551 5552 processor : 3 5553 BogoMIPS : 48.00 5554 Features : fp asimd aes pmull sha1 sha2 crc32 5555 CPU implementer : 0x41 5556 CPU architecture: 8 5557 CPU variant : 0x0 5558 CPU part : 0xd03 5559 CPU revision : 4 5560 5561 5562 ### meminfo: 5563 5564 MemTotal: 989056 kB 5565 MemFree: 798740 kB 5566 MemAvailable: 887012 kB 5567 Buffers: 15096 kB 5568 Cached: 80252 kB 5569 SwapCached: 0 kB 5570 Active: 67012 kB 5571 Inactive: 51664 kB 5572 Active(anon): 23516 kB 5573 Inactive(anon): 652 kB 5574 Active(file): 43496 kB 5575 Inactive(file): 51012 kB 5576 Unevictable: 0 kB 5577 Mlocked: 0 kB 5578 SwapTotal: 494524 kB 5579 SwapFree: 494524 kB 5580 Dirty: 692 kB 5581 Writeback: 0 kB 5582 AnonPages: 23400 kB 5583 Mapped: 23472 kB 5584 Shmem: 828 kB 5585 Slab: 27944 kB 5586 SReclaimable: 9176 kB 5587 SUnreclaim: 18768 kB 5588 KernelStack: 2480 kB 5589 PageTables: 1148 kB 5590 NFS_Unstable: 0 kB 5591 Bounce: 0 kB 5592 WritebackTmp: 0 kB 5593 CommitLimit: 989052 kB 5594 Committed_AS: 83468 kB 5595 VmallocTotal: 263061440 kB 5596 VmallocUsed: 0 kB 5597 VmallocChunk: 0 kB 5598 CmaTotal: 16384 kB 5599 CmaFree: 7468 kB 5600 HugePages_Total: 0 5601 HugePages_Free: 0 5602 HugePages_Rsvd: 0 5603 HugePages_Surp: 0 5604 Hugepagesize: 2048 kB 5605 5606 ### virtual memory: 5607 5608 vm.admin_reserve_kbytes = 8192 5609 vm.block_dump = 0 5610 vm.compact_unevictable_allowed = 1 5611 vm.dirty_background_bytes = 0 5612 vm.dirty_background_ratio = 10 5613 vm.dirty_bytes = 0 5614 vm.dirty_expire_centisecs = 3000 5615 vm.dirty_ratio = 20 5616 vm.dirtytime_expire_seconds = 43200 5617 vm.dirty_writeback_centisecs = 500 5618 vm.extfrag_threshold = 500 5619 vm.extra_free_kbytes = 0 5620 vm.hugepages_treat_as_movable = 0 5621 vm.hugetlb_shm_group = 0 5622 vm.laptop_mode = 0 5623 vm.legacy_va_layout = 0 5624 vm.lowmem_reserve_ratio = 256 32 5625 vm.max_map_count = 65530 5626 vm.min_free_kbytes = 3937 5627 vm.mmap_min_addr = 4096 5628 vm.mmap_rnd_bits = 18 5629 vm.mmap_rnd_compat_bits = 11 5630 vm.nr_hugepages = 0 5631 vm.nr_overcommit_hugepages = 0 5632 vm.nr_pdflush_threads = 0 5633 vm.oom_dump_tasks = 1 5634 vm.oom_kill_allocating_task = 0 5635 vm.overcommit_kbytes = 0 5636 vm.overcommit_memory = 0 5637 vm.overcommit_ratio = 50 5638 vm.page-cluster = 0 5639 vm.panic_on_oom = 0 5640 vm.percpu_pagelist_fraction = 0 5641 vm.stat_interval = 1 5642 vm.swappiness = 100 5643 vm.user_reserve_kbytes = 30000 5644 vm.vfs_cache_pressure = 100 5645 vm.watermark_scale_factor = 10 5646 5647 ### ip addr: 5648 5649 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 5650 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 5651 inet XXX.XXX.0.1/8 scope host lo 5652 valid_lft forever preferred_lft forever 5653 inet6 ::1/128 scope host noprefixroute 5654 valid_lft forever preferred_lft forever 5655 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 5656 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 5657 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 5658 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 5659 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 5660 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 5661 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 5662 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 5663 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 5664 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 5665 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 5666 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 5667 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 5668 link/tunnel6 :: brd :: 5669 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 5670 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 5671 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 5672 link/tunnel6 :: brd :: 5673 5674 ### partitions: 5675 5676 major minor #blocks name 5677 5678 179 0 62410752 mmcblk0 5679 179 1 61763584 mmcblk0p1 5680 253 0 494528 zram0 5681 253 1 51200 zram1 5682 5683 ### df: 5684 5685 udev 466M 0 466M 0% /dev 5686 tmpfs 97M 868K 96M 1% /run 5687 /dev/mmcblk0p1 58G 6.4G 51G 12% / 5688 tmpfs 483M 0 483M 0% /dev/shm 5689 tmpfs 5.0M 0 5.0M 0% /run/lock 5690 tmpfs 483M 4.0K 483M 1% /tmp 5691 /dev/zram1 47M 7.9M 36M 19% /var/log 5692 5693 ### lsblk: 5694 5695 NAME FSTYPE SIZE MOUNTPOINT UUID 5696 mmcblk0 59.5G 5697 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 5698 zram1 50M /var/log 5699 zram2 0B 5700 5701 ### zramctl: 5702 5703 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 5704 /dev/zram1 lz4 50M 7.7M 2.1M 2.5M 4 /var/log 5705 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 5706 5707 ### mtab: 5708 5709 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 5710 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 5711 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 5712 5713 ### mmc0:0001 info: 5714 5715 manfid: 0x0000fe 5716 cid: fe3432534431364720000000690091f5 5717 fwrev: 0x0 5718 csd: 400e00325b590001dc277f800a40008b 5719 ocr: 0x00200000 5720 type: SD 5721 date: 01/2009 5722 hwrev: 0x2 5723 dsr: 0x404 5724 serial: 0x00000069 5725 erase_size: 512 5726 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 5727 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 5728 scr: 0285808300000000 5729 oemid: 0x3432 5730 preferred_erase_size: 4194304 5731 name: SD16G 5732 5733 ### Boot system health: 5734 5735 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 5736 14:27:49 1512 MHz 1.56 19% 9% 6% 0% 3% 0% 47.8 °C 0/5 5737 14:27:50 1512 MHz 1.56 89% 17% 17% 1% 53% 0% 47.2 °C 0/5 5738 14:27:50 1512 MHz 2.56 98% 34% 50% 1% 12% 0% 47.2 °C 0/5 5739 14:27:51 1512 MHz 2.56 100% 34% 61% 0% 3% 0% 49.4 °C 0/5 5740 14:27:51 1512 MHz 2.56 100% 39% 51% 1% 7% 0% 49.4 °C 0/5 5741 5742 ### Activated 1 lzo zram swap devices with 482MB each. 5743 ### Activated Armbian ramlog partition with lz4 compression 5744 5745 Mon Sep 25 02:38:27 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 5746 5747 ### dmesg: 5748 5749 [ 0.000000] Booting Linux on physical CPU 0x0 5750 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 5751 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 5752 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 5753 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 5754 [ 0.000000] On node 0 totalpages: 262144 5755 [ 0.000000] DMA zone: 4096 pages used for memmap 5756 [ 0.000000] DMA zone: 0 pages reserved 5757 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 5758 [ 0.000000] psci: probing for conduit method from DT. 5759 [ 0.000000] psci: PSCIv1.0 detected in firmware. 5760 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 5761 [ 0.000000] psci: Trusted OS migration not required 5762 [ 0.000000] psci: SMC Calling Convention v1.0 5763 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 5764 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 5765 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 5766 [ 0.000000] Detected VIPT I-cache on CPU0 5767 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 5768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 5769 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 5770 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 5771 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 5772 [ 0.000000] log_buf_len min size: 131072 bytes 5773 [ 0.000000] log_buf_len: 524288 bytes 5774 [ 0.000000] early log buf free: 129352(98%) 5775 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 5776 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 5777 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 5778 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 5779 [ 0.000000] Virtual kernel memory layout: 5780 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 5781 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 5782 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 5783 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 5784 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 5785 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 5786 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 5787 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 5788 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 5789 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 5790 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 5791 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 5792 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 5793 [ 0.000000] Preemptible hierarchical RCU implementation. 5794 [ 0.000000] Build-time adjustment of leaf fanout to 64. 5795 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 5796 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 5797 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 5798 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 5799 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 5800 [ 0.000238] Console: colour dummy device 80x25 5801 [ 0.000253] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 5802 [ 0.000262] pid_max: default: 32768 minimum: 301 5803 [ 0.000458] Security Framework initialized 5804 [ 0.000467] AppArmor: AppArmor disabled by boot time parameter 5805 [ 0.000582] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 5806 [ 0.000588] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 5807 [ 0.001861] sched-energy: CPU device node has no sched-energy-costs 5808 [ 0.001876] Invalid sched_group_energy for CPU0 5809 [ 0.001883] CPU0: update cpu_capacity 1024 5810 [ 0.008972] ASID allocator initialised with 32768 entries 5811 [ 0.027956] BOOTEVENT: 27.942499: ON 5812 [ 0.055924] Detected VIPT I-cache on CPU1 5813 [ 0.055978] Invalid sched_group_energy for CPU1 5814 [ 0.055982] CPU1: update cpu_capacity 1024 5815 [ 0.055985] CPU1: Booted secondary processor [410fd034] 5816 [ 0.079315] Detected VIPT I-cache on CPU2 5817 [ 0.079353] Invalid sched_group_energy for CPU2 5818 [ 0.079357] CPU2: update cpu_capacity 1024 5819 [ 0.079360] CPU2: Booted secondary processor [410fd034] 5820 [ 0.102713] Detected VIPT I-cache on CPU3 5821 [ 0.102747] Invalid sched_group_energy for CPU3 5822 [ 0.102750] CPU3: update cpu_capacity 1024 5823 [ 0.102753] CPU3: Booted secondary processor [410fd034] 5824 [ 0.102832] Brought up 4 CPUs 5825 [ 0.102840] SMP: Total of 4 processors activated. 5826 [ 0.102848] CPU features: detected feature: 32-bit EL0 Support 5827 [ 0.102854] CPU features: detected feature: Kernel page table isolation (KPTI) 5828 [ 0.106614] CPU: All CPU(s) started at EL1 5829 [ 0.106637] alternatives: patching kernel code 5830 [ 0.106815] Invalid sched_group_energy for CPU3 5831 [ 0.106824] CPU3: update max cpu_capacity 1024 5832 [ 0.106830] Invalid sched_group_energy for Cluster3 5833 [ 0.106835] Invalid sched_group_energy for CPU2 5834 [ 0.106840] Invalid sched_group_energy for Cluster2 5835 [ 0.106845] Invalid sched_group_energy for CPU1 5836 [ 0.106851] Invalid sched_group_energy for Cluster1 5837 [ 0.106855] Invalid sched_group_energy for CPU0 5838 [ 0.106861] Invalid sched_group_energy for Cluster0 5839 [ 0.108293] devtmpfs: initialized 5840 [ 0.112726] CPU1: update max cpu_capacity 1024 5841 [ 0.143431] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 5842 [ 0.143451] futex hash table entries: 1024 (order: 5, 131072 bytes) 5843 [ 0.144111] xor: measuring software checksum speed 5844 [ 0.176260] 8regs : 1933.200 MB/sec 5845 [ 0.209639] 8regs_prefetch: 1720.800 MB/sec 5846 [ 0.243027] 32regs : 2287.200 MB/sec 5847 [ 0.276414] 32regs_prefetch: 1935.600 MB/sec 5848 [ 0.276419] xor: using function: 32regs (2287.200 MB/sec) 5849 [ 0.276479] atomic64_test: passed 5850 [ 0.276485] pinctrl core: initialized pinctrl subsystem 5851 [ 0.277657] NET: Registered protocol family 16 5852 [ 0.278906] dump_class_init,861, success 5853 [ 0.296479] cpuidle: using governor menu 5854 [ 0.297894] sunxi iommu: irq = 8 5855 [ 0.298211] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 5856 [ 0.298229] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 5857 [ 0.299634] DMA: preallocated 256 KiB pool for atomic allocations 5858 [ 0.301012] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 5859 [ 0.315393] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 5860 [ 0.319314] iommu: Adding device 1c0e000.ve to group 0 5861 [ 0.319820] iommu: Adding device 1c00000.vp9 to group 0 5862 [ 0.331245] iommu: Adding device 1000000.disp to group 0 5863 [ 0.332650] iommu: Adding device 1480000.g2d to group 0 5864 [ 0.335865] iommu: Adding device csi0 to group 0 5865 [ 0.336319] iommu: Adding device csi1 to group 0 5866 [ 0.337515] iommu: Adding device 6600800.vind:scaler@0 to group 0 5867 [ 0.337814] iommu: Adding device 6600800.vind:scaler@1 to group 0 5868 [ 0.338113] iommu: Adding device 6600800.vind:scaler@2 to group 0 5869 [ 0.338403] iommu: Adding device 6600800.vind:scaler@3 to group 0 5870 [ 0.338693] iommu: Adding device 6600800.vind:scaler@4 to group 0 5871 [ 0.338987] iommu: Adding device 6600800.vind:scaler@5 to group 0 5872 [ 0.339927] iommu: Adding device vinc0 to group 0 5873 [ 0.340536] iommu: Adding device vinc1 to group 0 5874 [ 0.341999] iommu: Adding device 1420000.deinterlace to group 0 5875 [ 0.387969] HugeTLB registered 2 MB page size, pre-allocated 0 pages 5876 [ 0.444207] raid6: int64x1 gen() 393 MB/s 5877 [ 0.500872] raid6: int64x1 xor() 365 MB/s 5878 [ 0.557597] raid6: int64x2 gen() 590 MB/s 5879 [ 0.614378] raid6: int64x2 xor() 512 MB/s 5880 [ 0.671168] raid6: int64x4 gen() 840 MB/s 5881 [ 0.727954] raid6: int64x4 xor() 629 MB/s 5882 [ 0.784771] raid6: int64x8 gen() 965 MB/s 5883 [ 0.841502] raid6: int64x8 xor() 655 MB/s 5884 [ 0.898290] raid6: neonx1 gen() 648 MB/s 5885 [ 0.955061] raid6: neonx1 xor() 641 MB/s 5886 [ 1.011844] raid6: neonx2 gen() 976 MB/s 5887 [ 1.068646] raid6: neonx2 xor() 820 MB/s 5888 [ 1.125400] raid6: neonx4 gen() 1287 MB/s 5889 [ 1.182198] raid6: neonx4 xor() 966 MB/s 5890 [ 1.238981] raid6: neonx8 gen() 1324 MB/s 5891 [ 1.295733] raid6: neonx8 xor() 991 MB/s 5892 [ 1.295738] raid6: using algorithm neonx8 gen() 1324 MB/s 5893 [ 1.295743] raid6: .... xor() 991 MB/s, rmw enabled 5894 [ 1.295749] raid6: using intx1 recovery algorithm 5895 [ 1.295881] pwm module init! 5896 [ 1.300143] sunxi-pm debug v3.10 5897 [ 1.301215] SCSI subsystem initialized 5898 [ 1.301842] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 5899 [ 1.301924] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 5900 [ 1.302044] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 5901 [ 1.302561] spi spi0: master is unqueued, this is deprecated 5902 [ 1.302868] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 5903 [ 1.303441] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 5904 [ 1.303519] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 5905 [ 1.303635] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 5906 [ 1.304098] spi spi1: master is unqueued, this is deprecated 5907 [ 1.304403] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 5908 [ 1.305208] usbcore: registered new interface driver usbfs 5909 [ 1.305292] usbcore: registered new interface driver hub 5910 [ 1.305365] usbcore: registered new device driver usb 5911 [ 1.305526] sunxi_i2c_adap_init()2522 - init 5912 [ 1.306099] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 5913 [ 1.306194] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 5914 [ 1.306202] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 5915 [ 1.306217] twi3 supply twi not found, using dummy regulator 5916 [ 1.306291] twi_request_gpio()451 - [i2c3] init name: twi3 5917 [ 1.307063] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 5918 [ 1.307144] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 5919 [ 1.307151] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 5920 [ 1.307165] twi5 supply twi not found, using dummy regulator 5921 [ 1.307238] twi_request_gpio()451 - [i2c5] init name: twi5 5922 [ 1.307723] axp20x-i2c 5-0036: AXP20x variant AXP806 found 5923 [ 1.326445] random: fast init done 5924 [ 1.337599] axp20x-i2c 5-0036: AXP20X driver loaded 5925 [ 1.338134] media: Linux media interface: v0.10 5926 [ 1.338214] Linux video capture interface: v2.00 5927 [ 1.338950] Advanced Linux Sound Architecture Driver Initialized. 5928 [ 1.339676] Bluetooth: Core ver 2.22 5929 [ 1.339753] NET: Registered protocol family 31 5930 [ 1.339759] Bluetooth: HCI device and connection manager initialized 5931 [ 1.339775] Bluetooth: HCI socket layer initialized 5932 [ 1.339788] Bluetooth: L2CAP socket layer initialized 5933 [ 1.339825] Bluetooth: SCO socket layer initialized 5934 [ 1.340637] [DISP]disp_module_init 5935 [ 1.341879] [DISP] parser_disp_init_para,line:1403: 5936 [ 1.341888] of_property_read fb0_width fail 5937 [ 1.341898] [DISP] disp_init,line:2215: 5938 [ 1.341904] smooth display screen:0 type:4 mode:10 5939 [ 1.359383] [DISP]disp_module_init finish 5940 [ 1.360268] clocksource: Switched to clocksource arch_sys_counter 5941 [ 1.360527] VFS: Disk quotas dquot_6.6.0 5942 [ 1.360615] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 5943 [ 1.361355] Console: switching to colour frame buffer device 240x67 5944 [ 1.404965] NET: Registered protocol family 2 5945 [ 1.405091] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 5946 [ 1.420527] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 5947 [ 1.420600] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 5948 [ 1.420724] TCP: Hash tables configured (established 8192 bind 8192) 5949 [ 1.420812] UDP hash table entries: 512 (order: 2, 16384 bytes) 5950 [ 1.420841] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 5951 [ 1.421169] NET: Registered protocol family 1 5952 [ 1.421788] RPC: Registered named UNIX socket transport module. 5953 [ 1.421793] RPC: Registered udp transport module. 5954 [ 1.421796] RPC: Registered tcp transport module. 5955 [ 1.421799] RPC: Registered tcp NFSv4.1 backchannel transport module. 5956 [ 1.422067] Trying to unpack rootfs image as initramfs... 5957 [ 2.176429] Freeing initrd memory: 17256K 5958 [ 2.177558] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 5959 [ 2.181455] audit: initializing netlink subsys (disabled) 5960 [ 2.181510] audit: type=2000 audit(2.176:1): initialized 5961 [ 2.182415] workingset: timestamp_bits=45 max_order=18 bucket_order=0 5962 [ 2.193668] DLM installed 5963 [ 2.195511] squashfs: version 4.0 (2009/01/31) Phillip Lougher 5964 [ 2.195852] Registering sdcardfs 0.1 5965 [ 2.196316] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 5966 [ 2.197871] ntfs: driver 2.1.32 [Flags: R/W]. 5967 [ 2.204515] NET: Registered protocol family 38 5968 [ 2.204881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 5969 [ 2.205015] io scheduler noop registered 5970 [ 2.205022] io scheduler deadline registered 5971 [ 2.205184] io scheduler cfq registered (default) 5972 [ 2.207233] failed to get easy_light_used assign 5973 [ 2.207243] failed to get normal led pin assign 5974 [ 2.207249] failed to get standby led pin assign 5975 [ 2.207254] failed to get standby led pin assign 5976 [ 2.207259] these is zero number for gpio 5977 [ 2.207264] gpio_init finish with uesd 5978 [ 2.210400] uart uart0: get regulator failed 5979 [ 2.210603] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 5980 [ 2.210625] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 5981 [ 2.210711] console [ttyS0] enabled 5982 [ 2.211510] uart uart1: get regulator failed 5983 [ 2.211708] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 5984 [ 2.212410] uart uart5: get regulator failed 5985 [ 2.212594] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 5986 [ 2.213915] misc dump reg init 5987 [ 2.215056] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 5988 [ 2.215392] Unable to detect cache hierarchy for CPU 0 5989 [ 2.229485] brd: module loaded 5990 [ 2.237791] loop: module loaded 5991 [ 2.237983] [NAND][NE] Not found valid nand node on dts 5992 [ 2.238568] Get boot type cmd line fail 5993 [ 2.239150] sunxi-bt soc@03000000:bt: Missing bt_power. 5994 [ 2.239160] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 5995 [ 2.239167] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 5996 [ 2.239174] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 5997 [ 2.239230] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 5998 [ 2.239301] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 5999 [ 2.240148] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 6000 [ 2.240159] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 6001 [ 2.240166] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 6002 [ 2.240174] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 6003 [ 2.240181] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 6004 [ 2.240211] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 6005 [ 2.240245] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 6006 [ 2.240311] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 6007 [ 2.240332] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 6008 [ 2.241315] [ADDR_MGT] addr_mgt_probe: success. 6009 [ 2.247933] tun: Universal TUN/TAP device driver, 1.6 6010 [ 2.247945] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 6011 [ 2.249924] gmac-power0: NULL 6012 [ 2.249934] gmac-power1: NULL 6013 [ 2.249940] gmac-power2: NULL 6014 [ 2.250894] PPP generic driver version 2.4.2 6015 [ 2.251187] PPP BSD Compression module registered 6016 [ 2.251197] PPP Deflate Compression module registered 6017 [ 2.251225] PPP MPPE Compression module registered 6018 [ 2.251234] NET: Registered protocol family 24 6019 [ 2.251267] PPTP driver version 0.8.5 6020 [ 2.251630] usbcore: registered new interface driver r8152 6021 [ 2.251705] usbcore: registered new interface driver asix 6022 [ 2.251803] usbcore: registered new interface driver ax88179_178a 6023 [ 2.251872] usbcore: registered new interface driver cdc_ether 6024 [ 2.251932] usbcore: registered new interface driver net1080 6025 [ 2.252001] usbcore: registered new interface driver cdc_subset 6026 [ 2.252068] usbcore: registered new interface driver zaurus 6027 [ 2.252156] usbcore: registered new interface driver cdc_ncm 6028 [ 2.252163] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 6029 [ 2.252552] get drv_vbus is fail, 84 6030 [ 2.252561] get ehci0-controller, regulator_io is no nocare 6031 [ 2.252825] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 6032 [ 2.252831] [sunxi-ehci0]: Not init ehci0 6033 [ 2.252946] get ehci1-controller, regulator_io is no nocare 6034 [ 2.253136] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 6035 [ 2.253195] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6036 [ 2.253222] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 6037 [ 2.253891] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 6038 [ 2.270279] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 6039 [ 2.270552] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 6040 [ 2.270560] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6041 [ 2.270568] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6042 [ 2.270575] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 6043 [ 2.270582] usb usb1: SerialNumber: sunxi-ehci 6044 [ 2.271442] hub 1-0:1.0: USB hub found 6045 [ 2.271486] hub 1-0:1.0: 1 port detected 6046 [ 2.272176] get drv_vbus is fail, 84 6047 [ 2.272184] get ehci2-controller, regulator_io is no nocare 6048 [ 2.272428] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 6049 [ 2.272479] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6050 [ 2.272503] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 6051 [ 2.272783] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 6052 [ 2.283632] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 6053 [ 2.283861] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 6054 [ 2.283870] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6055 [ 2.283878] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6056 [ 2.283885] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 6057 [ 2.283892] usb usb2: SerialNumber: sunxi-ehci 6058 [ 2.284749] hub 2-0:1.0: USB hub found 6059 [ 2.284793] hub 2-0:1.0: 1 port detected 6060 [ 2.285459] get drv_vbus is fail, 84 6061 [ 2.285466] get ehci3-controller, regulator_io is no nocare 6062 [ 2.285708] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 6063 [ 2.285758] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6064 [ 2.285783] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 6065 [ 2.286072] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 6066 [ 2.296944] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 6067 [ 2.297151] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 6068 [ 2.297159] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6069 [ 2.297167] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6070 [ 2.297174] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 6071 [ 2.297181] usb usb3: SerialNumber: sunxi-ehci 6072 [ 2.298000] hub 3-0:1.0: USB hub found 6073 [ 2.298055] hub 3-0:1.0: 1 port detected 6074 [ 2.298981] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 6075 [ 2.299346] get drv_vbus is fail, 84 6076 [ 2.299354] get ohci0-controller, regulator_io is no nocare 6077 [ 2.299693] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 6078 [ 2.299700] [sunxi-ohci0]: Not init ohci0 6079 [ 2.299812] get ohci1-controller, regulator_io is no nocare 6080 [ 2.299981] hci: request ohci1-controller gpio:80 6081 [ 2.300057] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 6082 [ 2.300109] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 6083 [ 2.300135] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 6084 [ 2.300223] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 6085 [ 2.361139] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 6086 [ 2.361150] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6087 [ 2.361158] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 6088 [ 2.361165] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 6089 [ 2.361172] usb usb4: SerialNumber: sunxi-ohci 6090 [ 2.362029] hub 4-0:1.0: USB hub found 6091 [ 2.362074] hub 4-0:1.0: 1 port detected 6092 [ 2.362745] get drv_vbus is fail, 84 6093 [ 2.362754] get ohci2-controller, regulator_io is no nocare 6094 [ 2.363081] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 6095 [ 2.363130] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 6096 [ 2.363160] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 6097 [ 2.363237] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 6098 [ 2.421123] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 6099 [ 2.421134] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6100 [ 2.421142] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 6101 [ 2.421149] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 6102 [ 2.421156] usb usb5: SerialNumber: sunxi-ohci 6103 [ 2.422016] hub 5-0:1.0: USB hub found 6104 [ 2.422065] hub 5-0:1.0: 1 port detected 6105 [ 2.422745] get drv_vbus is fail, 84 6106 [ 2.422753] get ohci3-controller, regulator_io is no nocare 6107 [ 2.423090] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 6108 [ 2.423138] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 6109 [ 2.423165] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 6110 [ 2.423241] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 6111 [ 2.481119] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 6112 [ 2.481129] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6113 [ 2.481137] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 6114 [ 2.481144] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 6115 [ 2.481151] usb usb6: SerialNumber: sunxi-ohci 6116 [ 2.481999] hub 6-0:1.0: USB hub found 6117 [ 2.482044] hub 6-0:1.0: 1 port detected 6118 [ 2.482968] ohci-platform: OHCI generic platform driver 6119 [ 2.483728] usbcore: registered new interface driver uas 6120 [ 2.483903] usbcore: registered new interface driver usb-storage 6121 [ 2.483998] usbcore: registered new interface driver ums-alauda 6122 [ 2.484075] usbcore: registered new interface driver ums-cypress 6123 [ 2.484150] usbcore: registered new interface driver ums-datafab 6124 [ 2.484223] usbcore: registered new interface driver ums_eneub6250 6125 [ 2.484316] usbcore: registered new interface driver ums-freecom 6126 [ 2.484395] usbcore: registered new interface driver ums-isd200 6127 [ 2.484468] usbcore: registered new interface driver ums-jumpshot 6128 [ 2.484540] usbcore: registered new interface driver ums-karma 6129 [ 2.484613] usbcore: registered new interface driver ums-onetouch 6130 [ 2.484704] usbcore: registered new interface driver ums-realtek 6131 [ 2.484780] usbcore: registered new interface driver ums-sddr09 6132 [ 2.484857] usbcore: registered new interface driver ums-sddr55 6133 [ 2.484941] usbcore: registered new interface driver ums-usbat 6134 [ 2.485089] usb_serial_number:20080411 6135 [ 2.486316] input: sunxi-keyboard as /devices/virtual/input/input0 6136 [ 2.486971] usbcore: registered new interface driver xpad 6137 [ 2.487100] usbcore: registered new interface driver usb_acecad 6138 [ 2.487191] usbcore: registered new interface driver aiptek 6139 [ 2.487279] usbcore: registered new interface driver gtco 6140 [ 2.487364] usbcore: registered new interface driver hanwang 6141 [ 2.487447] usbcore: registered new interface driver kbtab 6142 [ 2.487928] axp2101_pek: axp2101-pek can not register without irq 6143 [ 2.487951] axp2101-pek: probe of axp2101-pek.0 failed with error -22 6144 [ 2.489416] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 6145 [ 2.489483] sunxi-rtc rtc: RTC enabled 6146 [ 2.489972] i2c /dev entries driver 6147 [ 2.490942] lirc_dev: IR Remote Control driver registered, major 244 6148 [ 2.490955] IR NEC protocol handler initialized 6149 [ 2.490961] IR RC5(x/sz) protocol handler initialized 6150 [ 2.490967] IR RC6 protocol handler initialized 6151 [ 2.490973] IR JVC protocol handler initialized 6152 [ 2.490978] IR Sony protocol handler initialized 6153 [ 2.490984] IR SANYO protocol handler initialized 6154 [ 2.490990] IR Sharp protocol handler initialized 6155 [ 2.490996] IR MCE Keyboard/mouse protocol handler initialized 6156 [ 2.491002] IR LIRC bridge handler initialized 6157 [ 2.491007] IR XMP protocol handler initialized 6158 [ 2.491532] sunxi_ir_startup: get ir protocol failed 6159 [ 2.491574] 7040000.s_cir supply ir0 not found, using dummy regulator 6160 [ 2.491767] Registered IR keymap rc_map_sunxi 6161 [ 2.492173] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 6162 [ 2.492424] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 6163 [ 2.493405] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 6164 [ 2.494022] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 6165 [ 2.494730] sunxi cedar version 0.1 6166 [ 2.494906] VE: install start!!! 6167 6168 [ 2.495095] cedar_ve: cedar-ve the get irq is 278 6169 [ 2.495719] VE: get debugfs_mpp_root is NULL, please check mpp 6170 6171 [ 2.495733] VE: sunxi ve debug register driver failed! 6172 6173 [ 2.498983] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 6174 [ 2.500304] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 6175 [ 2.504005] Bluetooth: HCI UART driver ver 2.3 6176 [ 2.504017] Bluetooth: HCI UART protocol H4 registered 6177 [ 2.504023] Bluetooth: HCI UART protocol LL registered 6178 [ 2.504029] Bluetooth: HCI UART protocol Three-wire (H5) registered 6179 [ 2.508037] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 6180 [ 2.508053] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 6181 [ 2.508065] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 6182 [ 2.508077] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 6183 [ 2.508090] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 6184 [ 2.508101] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 6185 [ 2.508459] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 6186 [ 2.508558] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 6187 [ 2.508751] sunxi-mmc sdc0: No vmmc regulator found 6188 [ 2.508758] sunxi-mmc sdc0: No vqmmc regulator found 6189 [ 2.508764] sunxi-mmc sdc0: No vdmmc regulator found 6190 [ 2.508771] sunxi-mmc sdc0: No vd33sw regulator found 6191 [ 2.508777] sunxi-mmc sdc0: No vd18sw regulator found 6192 [ 2.508783] sunxi-mmc sdc0: No vq33sw regulator found 6193 [ 2.508789] sunxi-mmc sdc0: No vq18sw regulator found 6194 [ 2.509499] sunxi-mmc sdc0: set host busy 6195 [ 2.509585] sunxi-mmc sdc0: Got CD GPIO 6196 [ 2.509947] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 6197 [ 2.509981] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 6198 [ 2.523690] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6199 [ 2.540522] sunxi-mmc sdc0: detmode:gpio irq 6200 [ 2.540557] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6201 [ 2.543067] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6202 [ 2.544448] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 6203 [ 2.544584] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 6204 [ 2.544724] sunxi-mmc sdc1: No vmmc regulator found 6205 [ 2.544731] sunxi-mmc sdc1: No vqmmc regulator found 6206 [ 2.544737] sunxi-mmc sdc1: No vdmmc regulator found 6207 [ 2.544744] sunxi-mmc sdc1: No vd33sw regulator found 6208 [ 2.544750] sunxi-mmc sdc1: No vd18sw regulator found 6209 [ 2.544756] sunxi-mmc sdc1: No vq33sw regulator found 6210 [ 2.544762] sunxi-mmc sdc1: No vq18sw regulator found 6211 [ 2.545126] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6212 [ 2.545596] sunxi-mmc sdc1: set host busy 6213 [ 2.545679] mmc:failed to get gpios 6214 [ 2.545966] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 6215 [ 2.547614] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6216 [ 2.560348] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6217 [ 2.571412] mmc0: host does not support reading read-only switch, assuming write-enable 6218 [ 2.573275] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 6219 [ 2.573349] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 6220 [ 2.573493] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 6221 [ 2.573584] mmc0: new high speed SDXC card at address 0001 6222 [ 2.577048] sunxi-mmc sdc1: detmode:manually by software 6223 [ 2.578128] mmcblk0: mmc0:0001 SD16G 59.5 GiB 6224 [ 2.579024] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 6225 [ 2.579653] ledtrig-cpu: registered to indicate activity on CPUs 6226 [ 2.579944] mmcblk0: p1 6227 [ 2.580248] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 6228 [ 2.580338] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6229 [ 2.582890] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6230 [ 2.584840] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 6231 [ 2.585679] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 6232 [ 2.586138] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 6233 [ 2.586147] sunxi_emce_probe()590emce hw init failed! 6234 [ 2.586174] emce: probe of emce failed with error -2 6235 [ 2.586465] hidraw: raw HID events driver (C) Jiri Kosina 6236 [ 2.586518] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 6237 [ 2.587372] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 6238 [ 2.587423] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 6239 [ 2.591403] usbcore: registered new interface driver usbhid 6240 [ 2.591411] usbhid: USB HID core driver 6241 [ 2.592834] optee: probing for conduit method from DT. 6242 [ 2.592847] optee: api uid mismatch 6243 [ 2.593428] usbcore: registered new interface driver snd-usb-audio 6244 [ 2.595169] [sunxi_hdmi_codec_init] driver and deivce register finished. 6245 [ 2.596779] [sunxi_internal_codec_probe]:get audio avcc failed 6246 [ 2.596820] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 6247 [ 2.597237] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 6248 [ 2.599761] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 6249 [ 2.601723] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 6250 [ 2.601737] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 6251 [ 2.604011] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 6252 [ 2.604036] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 6253 [ 2.608032] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 6254 [ 2.609428] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 6255 [ 2.611366] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 6256 [ 2.614415] pktgen: Packet Generator for packet performance testing. Version: 2.75 6257 [ 2.614849] u32 classifier 6258 [ 2.614856] Actions configured 6259 [ 2.614868] Netfilter messages via NETLINK v0.30. 6260 [ 2.614895] nfnl_acct: registering with nfnetlink. 6261 [ 2.615228] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 6262 [ 2.615480] ctnetlink v0.93: registering with nfnetlink. 6263 [ 2.616249] xt_time: kernel timezone is -0000 6264 [ 2.616273] IPVS: Registered protocols (TCP, UDP) 6265 [ 2.616381] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 6266 [ 2.616505] IPVS: Creating netns size=1928 id=0 6267 [ 2.616637] IPVS: ipvs loaded. 6268 [ 2.616645] IPVS: [rr] scheduler registered. 6269 [ 2.616742] ipip: IPv4 and MPLS over IPv4 tunneling driver 6270 [ 2.617538] gre: GRE over IPv4 demultiplexor driver 6271 [ 2.617547] ip_gre: GRE over IPv4 tunneling driver 6272 [ 2.618849] IPv4 over IPsec tunneling driver 6273 [ 2.619693] ip_tables: (C) 2000-2006 Netfilter Core Team 6274 [ 2.619971] arp_tables: arp_tables: (C) 2002 David S. Miller 6275 [ 2.620039] Initializing XFRM netlink socket 6276 [ 2.620073] IPsec XFRM device driver 6277 [ 2.620976] NET: Registered protocol family 10 6278 [ 2.622825] mip6: Mobile IPv6 6279 [ 2.622863] ip6_tables: (C) 2000-2006 Netfilter Core Team 6280 [ 2.624413] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 6281 [ 2.626030] NET: Registered protocol family 17 6282 [ 2.626072] NET: Registered protocol family 15 6283 [ 2.626229] Bridge firewalling registered 6284 [ 2.626375] Bluetooth: RFCOMM TTY layer initialized 6285 [ 2.626393] Bluetooth: RFCOMM socket layer initialized 6286 [ 2.626423] Bluetooth: RFCOMM ver 1.11 6287 [ 2.626438] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 6288 [ 2.626444] Bluetooth: BNEP filters: protocol multicast 6289 [ 2.626458] Bluetooth: BNEP socket layer initialized 6290 [ 2.626463] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 6291 [ 2.626475] Bluetooth: HIDP socket layer initialized 6292 [ 2.626579] l2tp_core: L2TP core driver, V2.0 6293 [ 2.626595] l2tp_ppp: PPPoL2TP kernel driver, V2.0 6294 [ 2.626601] 8021q: 802.1Q VLAN Support v1.8 6295 [ 2.626806] sctp: Hash tables configured (bind 256/256) 6296 [ 2.627451] Key type dns_resolver registered 6297 [ 2.627591] Registered cp15_barrier emulation handler 6298 [ 2.627604] Registered setend emulation handler 6299 [ 2.628525] registered taskstats version 1 6300 [ 2.640055] zswap: default zpool zbud not available 6301 [ 2.640063] zswap: pool creation failed 6302 [ 2.642876] Btrfs loaded, crc32c=crc32c-arm64-hw 6303 [ 2.643649] HDMI 2.0 driver init start! 6304 [ 2.643665] boot_hdmi=true 6305 [ 2.644470] Can not find the node of esm 6306 [ 2.644492] ERROR: pinctrl_get for HDMI2.0 DDC fail 6307 [ 2.644582] Get hdmi_power0:vcc-hdmi 6308 [ 2.644623] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 6309 [ 2.644796] Get hdmi_power1:vdd-hdmi 6310 [ 2.644817] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 6311 [ 2.646384] hdmi_cec_init 6312 [ 2.646837] [DISP] disp_device_attached,line:146: 6313 [ 2.646845] attached ok, mgr0<-->device0, type=4 6314 [ 2.646856] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 6315 [ 2.646868] [DISP] disp_hdmi_set_mode,line:648: 6316 [ 2.646873] hdmi_set_mode is null! 6317 [ 2.647942] HDMI2.0 module init end 6318 [ 2.659175] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 6319 [ 2.662696] cpu cpu1: opp_list_debug_create_link: Failed to create link 6320 [ 2.662709] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 6321 [ 2.662740] cpu cpu2: opp_list_debug_create_link: Failed to create link 6322 [ 2.662748] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 6323 [ 2.662778] cpu cpu3: opp_list_debug_create_link: Failed to create link 6324 [ 2.662785] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 6325 [ 2.665054] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 6326 [ 2.665950] get det_vbus is fail, 84 6327 [ 2.665958] get id is fail, 84 6328 [ 2.666440] sunxi-rtc rtc: setting system clock to 1970-01-01 00:22:04 UTC (1324) 6329 [ 2.670300] ALSA device list: 6330 [ 2.670309] #0: audiocodec 6331 [ 2.670312] #1: sndahub 6332 [ 2.670315] #2: sndhdmi 6333 [ 2.671925] Freeing unused kernel memory: 3008K 6334 [ 2.717256] random: systemd-udevd: uninitialized urandom read (16 bytes read) 6335 [ 2.719187] random: systemd-udevd: uninitialized urandom read (16 bytes read) 6336 [ 2.722174] random: systemd-udevd: uninitialized urandom read (16 bytes read) 6337 [ 2.790881] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 6338 [ 2.953709] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 6339 [ 3.050362] HDMI cable is connected 6340 [ 3.306956] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 6341 [ 3.527153] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 6342 [ 3.527162] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 6343 [ 3.527168] usb 4-1: Product: Rapoo 2.4G Wireless Device 6344 [ 3.527172] usb 4-1: Manufacturer: RAPOO 6345 [ 3.535130] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 6346 [ 3.535857] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 6347 [ 3.542018] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 6348 [ 3.598482] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 6349 [ 3.602405] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 6350 [ 3.659004] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 6351 [ 4.254527] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 6352 [ 5.147597] systemd[1]: System time before build time, advancing clock. 6353 [ 5.152434] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 6354 [ 5.152993] cgroup: cgroup2: unknown option "nsdelegate" 6355 [ 5.173411] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 6356 [ 5.173436] systemd[1]: Detected architecture arm64. 6357 [ 5.174620] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 6358 [ 5.184716] systemd[1]: Hostname set to <opi>. 6359 [ 5.211711] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 6360 [ 6.679990] (sd-execut[1459]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 6361 [ 6.827012] 6362 insmod_device_driver 6363 6364 [ 6.827268] device_chose finished 124! 6365 [ 7.178621] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 6366 [ 7.418011] systemd[1]: Queued start job for default target graphical.target. 6367 [ 7.425278] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 6368 [ 7.427470] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 6369 [ 7.429662] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 6370 [ 7.431043] systemd[1]: Created slice user.slice - User and Session Slice. 6371 [ 7.431679] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 6372 [ 7.432218] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 6373 [ 7.432550] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 6374 [ 7.433083] systemd[1]: Reached target slices.target - Slice Units. 6375 [ 7.433377] systemd[1]: Reached target swap.target - Swaps. 6376 [ 7.433743] systemd[1]: Reached target time-set.target - System Time Set. 6377 [ 7.434281] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 6378 [ 7.451639] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 6379 [ 7.452724] systemd[1]: Listening on syslog.socket - Syslog Socket. 6380 [ 7.453747] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 6381 [ 7.454427] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 6382 [ 7.456042] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 6383 [ 7.457073] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 6384 [ 7.458147] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 6385 [ 7.460405] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 6386 [ 7.461331] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 6387 [ 7.465149] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 6388 [ 7.469688] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 6389 [ 7.474704] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 6390 [ 7.475827] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 6391 [ 7.476789] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 6392 [ 7.484676] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 6393 [ 7.490408] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 6394 [ 7.496305] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 6395 [ 7.504391] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 6396 [ 7.513221] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 6397 [ 7.521256] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 6398 [ 7.534210] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 6399 [ 7.541610] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 6400 [ 7.548969] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 6401 [ 7.552011] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 6402 [ 7.560987] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 6403 [ 7.566893] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 6404 [ 7.572008] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 6405 [ 7.582594] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 6406 [ 7.585445] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 6407 [ 7.587692] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 6408 [ 7.590770] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 6409 [ 7.594680] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 6410 [ 7.598538] systemd[1]: modprobe@configfs.service: Deactivated successfully. 6411 [ 7.599539] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 6412 [ 7.600206] fuse init (API version 7.26) 6413 [ 7.602681] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 6414 [ 7.604458] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 6415 [ 7.608567] systemd[1]: modprobe@drm.service: Deactivated successfully. 6416 [ 7.624464] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 6417 [ 7.647729] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 6418 [ 7.671022] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 6419 [ 7.678825] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 6420 [ 7.679738] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 6421 [ 7.679751] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 6422 [ 7.679938] spidev spi1.1: Deleting spi1.1 6423 [ 7.681122] fbtft_device: GPIOS used by 'fb_st7735r': 6424 [ 7.681130] fbtft_device: 'reset' = GPIO73 6425 [ 7.681134] fbtft_device: 'dc' = GPIO70 6426 [ 7.681147] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 6427 [ 7.681152] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 6428 [ 7.682299] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 6429 [ 7.694285] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 6430 [ 7.700918] systemd[1]: modprobe@fuse.service: Deactivated successfully. 6431 [ 7.701801] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 6432 [ 7.704713] systemd[1]: modprobe@loop.service: Deactivated successfully. 6433 [ 7.705487] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 6434 [ 7.718320] WCN: marlin_init entry! 6435 [ 7.719543] WCN: marlin_parse_dt reset gpio=211 6436 [ 7.719554] WCN_ERR: gpio reset request err: 211 6437 [ 7.719560] WCN: wcn config bt wake host 6438 [ 7.720070] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 6439 [ 7.720400] WCN: wcn config wifi wake host 6440 [ 7.720428] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 6441 [ 7.723976] sdiohal:sdiohal_init ok 6442 [ 7.724860] WCN: marlin_probe ok! 6443 [ 7.733508] mtty_probe init device addr: 0xffffffc009756300 6444 [ 7.733750] -->rfkill_bluetooth_init 6445 [ 7.733974] <--rfkill_bluetooth_init 6446 [ 7.751476] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 6447 [ 7.760549] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 6448 [ 7.777992] WCN: start_marlin [MARLIN_WIFI] 6449 [ 7.778004] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 6450 [ 7.778007] WCN: the first power on start 6451 [ 7.784001] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 6452 [ 7.785242] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 6453 [ 7.791742] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 6454 [ 7.792850] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 6455 [ 7.799736] systemd[1]: Starting systemd-sysusers.service - Create System Users... 6456 [ 7.816104] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 6457 [ 7.818743] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 6458 [ 7.824547] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 6459 [ 7.880072] systemd[1]: Finished systemd-sysusers.service - Create System Users. 6460 [ 7.893738] WCN: marlin chip en pull up 6461 [ 7.913856] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 6462 [ 7.923686] sdiohal:sdiohal_scan_card 6463 [ 7.923702] sunxi-wlan soc@03000000:wlan: bus_index: 1 6464 [ 7.923749] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 6465 [ 7.940352] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6466 [ 7.957817] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 6467 [ 7.958681] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 6468 [ 7.958732] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6469 [ 7.961342] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6470 [ 7.964519] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6471 [ 7.980323] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6472 [ 7.991478] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 6473 [ 7.992265] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 6474 [ 7.992481] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 6475 [ 7.993275] mmc1: new ultra high speed SDR104 SDIO card at address 8800 6476 [ 7.994154] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 6477 [ 7.994414] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 6478 [ 7.994440] WCN: marlin_scan_finish! 6479 [ 7.994444] sdiohal:probe ok 6480 [ 7.994497] sdiohal:scan end! 6481 [ 7.994504] WCN: then marlin start to download 6482 [ 7.994525] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 6483 [ 8.028352] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 6484 [ 8.064490] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 6485 [ 8.070144] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 6486 [ 8.072860] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 6487 [ 8.075576] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 6488 [ 8.083857] systemd[1]: Mounting tmp.mount - /tmp... 6489 [ 8.104791] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 6490 [ 8.108173] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 6491 [ 8.114375] systemd[1]: Mounted tmp.mount - /tmp. 6492 [ 8.125610] systemd[1]: Reached target local-fs.target - Local File Systems. 6493 [ 8.131996] WCN: combin_img 0 marlin_firmware_write finish and successful 6494 [ 8.132017] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 6495 [ 8.132412] WCN: marlin_start_run read reset reg val:0x1 6496 [ 8.132420] WCN: after do marlin_start_run reset reg val:0x0 6497 [ 8.132740] WCN: s_marlin_bootup_time=8132731884 6498 [ 8.139412] WCN: clock mode: TSX 6499 [ 8.139605] WCN: marlin_write_cali_data sync init_state:0x1a0f50 6500 [ 8.158138] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 6501 [ 8.165206] systemd[1]: Starting console-setup.service - Set console font and keymap... 6502 [ 8.166614] WCN: marlin_write_cali_data sync init_state:0x1a0f50 6503 [ 8.172428] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 6504 [ 8.186760] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 6505 [ 8.190913] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 6506 [ 8.190922] WCN: sdio_config bt_wake_host trigger:[high] 6507 [ 8.190926] WCN: sdio_config irq:[inband] 6508 [ 8.190929] WCN: sdio_config wl_wake_host trigger:[high] 6509 [ 8.190934] WCN: sdio_config wake_host_level_duration_time:[20ms] 6510 [ 8.190937] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 6511 [ 8.190941] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 6512 [ 8.191424] WCN: marlin_write_cali_data finish 6513 [ 8.191680] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 6514 [ 8.195894] systemd[1]: Starting ufw.service - Uncomplicated firewall... 6515 [ 8.206647] systemd[1]: Finished console-setup.service - Set console font and keymap. 6516 [ 8.217359] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 6517 [ 8.243964] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 6518 [ 8.248385] systemd[1]: Received SIGRTMIN+20 from PID 1421 (plymouthd). 6519 [ 8.250720] systemd[1]: Finished ufw.service - Uncomplicated firewall. 6520 [ 8.255168] systemd[1]: Reached target network-pre.target - Preparation for Network. 6521 [ 8.261346] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 6522 [ 8.270807] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 6523 [ 8.290946] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 6524 [ 8.291585] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 6525 [ 8.297313] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 6526 [ 8.307628] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 6527 [ 8.318753] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 6528 [ 8.324025] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 6529 [ 8.324035] WCN: marlin_bind_verify confuse data: 0x8badefa1b12bbe26aeffa8d1a5c07 6530 [ 8.324052] WCN: marlin_bind_verify verify data: 0xccd7f963c19581907680f88f2044f687 6531 [ 8.324656] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 6532 [ 8.350520] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 6533 [ 8.350528] sdiohal:sdiohal_runtime_get entry 6534 [ 8.350678] WCN: get_cp2_version entry! 6535 [ 8.352067] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 6536 [ 8.352082] WCN: switch_cp2_log - close entry! 6537 [ 8.353466] WCN: WCND at cmd read:OK 6538 [ 8.353509] WCN: then marlin download finished and run ok 6539 [ 8.353515] WCN: start_loopcheck 6540 [ 8.366973] WCN: get_board_ant_num [one_ant] 6541 [ 8.366985] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 6542 [ 8.459917] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 6543 [ 8.464808] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 6544 [ 8.471521] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 6545 [ 8.538395] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 6546 [ 8.548382] systemd[1]: Starting networking.service - Raise network interfaces... 6547 [ 8.612143] zram: Added device: zram0 6548 [ 8.614514] zram: Added device: zram1 6549 [ 8.615542] zram: Added device: zram2 6550 [ 8.651867] zswap: can't enable, initialization failed 6551 [ 8.699500] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 6552 [ 8.703442] zram0: detected capacity change from 0 to 506396672 6553 [ 8.720976] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 6554 [ 8.786344] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 6555 [ 8.792421] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 6556 [ 8.794501] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 6557 [ 8.795219] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 6558 [ 8.805873] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 6559 [ 9.145127] systemd[1]: Finished networking.service - Raise network interfaces. 6560 [ 10.030601] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 6561 [ 10.148026] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 6562 [ 10.292618] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 6563 [ 10.937818] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 6564 [ 10.938089] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 6565 [ 10.938840] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 6566 [ 10.939951] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 6567 [ 10.953804] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 6568 [ 10.966397] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 6569 [ 10.976169] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 6570 [ 10.983026] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 6571 [ 10.988631] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 6572 [ 10.989717] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 6573 [ 10.994754] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 6574 [ 10.995641] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 6575 [ 11.002768] systemd[1]: modprobe@loop.service: Deactivated successfully. 6576 [ 11.003539] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 6577 [ 11.006299] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 6578 [ 11.006531] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 6579 [ 11.061551] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 6580 [ 11.063576] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 6581 [ 11.064633] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 6582 [ 11.065824] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 6583 [ 11.105893] sunxi-bt soc@03000000:bt: block state already is 1 6584 [ 11.108477] bluetooth_set_power: start_block=1 6585 [ 11.108493] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 0 6586 [ 11.108497] WCN: can not power off, other module is on 6587 [ 11.108505] bluetooth_set_power: end_block=1 6588 [ 11.119009] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 6589 [ 11.163270] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 6590 [ 11.169077] systemd[1]: Starting brltty.service - Braille Device Support... 6591 [ 11.738965] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 6592 [ 11.887401] zram1: detected capacity change from 0 to 52428800 6593 [ 11.901934] systemd[1]: Started brltty.service - Braille Device Support. 6594 [ 11.929997] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 6595 [ 15.993123] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 6596 [ 15.999188] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 6597 [ 16.060586] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 6598 [ 16.128164] systemd[1]: systemd-rfkill.service: Deactivated successfully. 6599 [ 19.887335] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 6600 [ 19.894062] systemd[1]: Starting systemd-journald.service - Journal Service... 6601 [ 20.169716] systemd-journald[1922]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.0 (1654 of 2204 items, 1269760 file size, 767 bytes per hash table item), suggesting rotation. 6602 [ 20.169738] systemd-journald[1922]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 6603 [ 20.176762] systemd[1]: Started systemd-journald.service - Journal Service. 6604 [ 20.223448] systemd-journald[1922]: Received client request to flush runtime journal. 6605 [ 20.493386] IPVS: Creating netns size=1928 id=1 6606 6607 ### armbian-release: 6608 6609 # PLEASE DO NOT EDIT THIS FILE 6610 BOARD=orangepizero2 6611 BOARD_NAME="Orange Pi Zero2" 6612 BOARDFAMILY=sun50iw9 6613 BUILD_REPOSITORY_URL=https://github.com/armbian/build 6614 BUILD_REPOSITORY_COMMIT=ac829eb6 6615 LINUXFAMILY=sun50iw9 6616 ARCH=arm64 6617 IMAGE_TYPE=stable 6618 BOARD_TYPE=conf 6619 INITRD_ARCH=arm 6620 KERNEL_IMAGE_TYPE=Image 6621 FORCE_BOOTSCRIPT_UPDATE=yes 6622 VENDOR=Armbian 6623 BOOTSCRIPT_FORCE_UPDATE="yes" 6624 BOOTSCRIPT_DST="boot.cmd" 6625 VERSION=23.8.1 6626 REVISION=23.8.1 6627 BRANCH=legacy 6628 6629 ### boot environment: 6630 6631 verbosity=1 6632 console=serial 6633 #disp_mode=1080p60 6634 #fb0_width=1280 6635 #fb0_height=720 6636 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 6637 rootfstype=ext4 6638 overlays=spi-spidev 6639 param_spidev_spi_bus=1 6640 param_spidev_spi_cs=1 6641 extraargs=fbcon=map:1 6642 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 6643 6644 ### lsusb: 6645 6646 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 6647 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 6648 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 6649 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 6650 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 6651 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 6652 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 6653 6654 ### lscpu: 6655 6656 Architecture: aarch64 6657 CPU op-mode(s): 32-bit, 64-bit 6658 Byte Order: Little Endian 6659 CPU(s): 4 6660 On-line CPU(s) list: 0-3 6661 Vendor ID: ARM 6662 Model name: Cortex-A53 6663 Model: 4 6664 Thread(s) per core: 1 6665 Core(s) per cluster: 4 6666 Socket(s): - 6667 Cluster(s): 1 6668 Stepping: r0p4 6669 CPU(s) scaling MHz: 100% 6670 CPU max MHz: 1512.0000 6671 CPU min MHz: 480.0000 6672 BogoMIPS: 48.00 6673 Flags: fp asimd aes pmull sha1 sha2 crc32 6674 6675 ### cpuinfo: 6676 6677 processor : 0 6678 BogoMIPS : 48.00 6679 Features : fp asimd aes pmull sha1 sha2 crc32 6680 CPU implementer : 0x41 6681 CPU architecture: 8 6682 CPU variant : 0x0 6683 CPU part : 0xd03 6684 CPU revision : 4 6685 6686 processor : 1 6687 BogoMIPS : 48.00 6688 Features : fp asimd aes pmull sha1 sha2 crc32 6689 CPU implementer : 0x41 6690 CPU architecture: 8 6691 CPU variant : 0x0 6692 CPU part : 0xd03 6693 CPU revision : 4 6694 6695 processor : 2 6696 BogoMIPS : 48.00 6697 Features : fp asimd aes pmull sha1 sha2 crc32 6698 CPU implementer : 0x41 6699 CPU architecture: 8 6700 CPU variant : 0x0 6701 CPU part : 0xd03 6702 CPU revision : 4 6703 6704 processor : 3 6705 BogoMIPS : 48.00 6706 Features : fp asimd aes pmull sha1 sha2 crc32 6707 CPU implementer : 0x41 6708 CPU architecture: 8 6709 CPU variant : 0x0 6710 CPU part : 0xd03 6711 CPU revision : 4 6712 6713 6714 ### meminfo: 6715 6716 MemTotal: 989056 kB 6717 MemFree: 792776 kB 6718 MemAvailable: 886300 kB 6719 Buffers: 15368 kB 6720 Cached: 85348 kB 6721 SwapCached: 0 kB 6722 Active: 64416 kB 6723 Inactive: 56496 kB 6724 Active(anon): 20552 kB 6725 Inactive(anon): 644 kB 6726 Active(file): 43864 kB 6727 Inactive(file): 55852 kB 6728 Unevictable: 0 kB 6729 Mlocked: 0 kB 6730 SwapTotal: 494524 kB 6731 SwapFree: 494524 kB 6732 Dirty: 9360 kB 6733 Writeback: 0 kB 6734 AnonPages: 20404 kB 6735 Mapped: 24492 kB 6736 Shmem: 828 kB 6737 Slab: 33092 kB 6738 SReclaimable: 9260 kB 6739 SUnreclaim: 23832 kB 6740 KernelStack: 2544 kB 6741 PageTables: 1056 kB 6742 NFS_Unstable: 0 kB 6743 Bounce: 0 kB 6744 WritebackTmp: 0 kB 6745 CommitLimit: 989052 kB 6746 Committed_AS: 75080 kB 6747 VmallocTotal: 263061440 kB 6748 VmallocUsed: 0 kB 6749 VmallocChunk: 0 kB 6750 CmaTotal: 16384 kB 6751 CmaFree: 7468 kB 6752 HugePages_Total: 0 6753 HugePages_Free: 0 6754 HugePages_Rsvd: 0 6755 HugePages_Surp: 0 6756 Hugepagesize: 2048 kB 6757 6758 ### virtual memory: 6759 6760 vm.admin_reserve_kbytes = 8192 6761 vm.block_dump = 0 6762 vm.compact_unevictable_allowed = 1 6763 vm.dirty_background_bytes = 0 6764 vm.dirty_background_ratio = 10 6765 vm.dirty_bytes = 0 6766 vm.dirty_expire_centisecs = 3000 6767 vm.dirty_ratio = 20 6768 vm.dirtytime_expire_seconds = 43200 6769 vm.dirty_writeback_centisecs = 500 6770 vm.extfrag_threshold = 500 6771 vm.extra_free_kbytes = 0 6772 vm.hugepages_treat_as_movable = 0 6773 vm.hugetlb_shm_group = 0 6774 vm.laptop_mode = 0 6775 vm.legacy_va_layout = 0 6776 vm.lowmem_reserve_ratio = 256 32 6777 vm.max_map_count = 65530 6778 vm.min_free_kbytes = 3937 6779 vm.mmap_min_addr = 4096 6780 vm.mmap_rnd_bits = 18 6781 vm.mmap_rnd_compat_bits = 11 6782 vm.nr_hugepages = 0 6783 vm.nr_overcommit_hugepages = 0 6784 vm.nr_pdflush_threads = 0 6785 vm.oom_dump_tasks = 1 6786 vm.oom_kill_allocating_task = 0 6787 vm.overcommit_kbytes = 0 6788 vm.overcommit_memory = 0 6789 vm.overcommit_ratio = 50 6790 vm.page-cluster = 0 6791 vm.panic_on_oom = 0 6792 vm.percpu_pagelist_fraction = 0 6793 vm.stat_interval = 1 6794 vm.swappiness = 100 6795 vm.user_reserve_kbytes = 30000 6796 vm.vfs_cache_pressure = 100 6797 vm.watermark_scale_factor = 10 6798 6799 ### ip addr: 6800 6801 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 6802 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 6803 inet XXX.XXX.0.1/8 scope host lo 6804 valid_lft forever preferred_lft forever 6805 inet6 ::1/128 scope host noprefixroute 6806 valid_lft forever preferred_lft forever 6807 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 6808 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 6809 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 6810 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 6811 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 6812 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 6813 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 6814 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 6815 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 6816 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6817 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 6818 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 6819 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 6820 link/tunnel6 :: brd :: 6821 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 6822 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 6823 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 6824 link/tunnel6 :: brd :: 6825 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 6826 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 6827 6828 ### partitions: 6829 6830 major minor #blocks name 6831 6832 179 0 62410752 mmcblk0 6833 179 1 61763584 mmcblk0p1 6834 253 0 494528 zram0 6835 253 1 51200 zram1 6836 6837 ### df: 6838 6839 udev 466M 0 466M 0% /dev 6840 tmpfs 97M 2.1M 95M 3% /run 6841 /dev/mmcblk0p1 58G 7.3G 51G 13% / 6842 tmpfs 483M 0 483M 0% /dev/shm 6843 tmpfs 5.0M 0 5.0M 0% /run/lock 6844 tmpfs 483M 4.0K 483M 1% /tmp 6845 /dev/zram1 47M 8.8M 35M 21% /var/log 6846 6847 ### lsblk: 6848 6849 NAME FSTYPE SIZE MOUNTPOINT UUID 6850 mmcblk0 59.5G 6851 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 6852 zram1 50M /var/log 6853 zram2 0B 6854 6855 ### zramctl: 6856 6857 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 6858 /dev/zram1 lz4 50M 8.9M 2.4M 2.9M 4 /var/log 6859 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 6860 6861 ### mtab: 6862 6863 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 6864 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 6865 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 6866 6867 ### mmc0:0001 info: 6868 6869 manfid: 0x0000fe 6870 cid: fe3432534431364720000000690091f5 6871 fwrev: 0x0 6872 csd: 400e00325b590001dc277f800a40008b 6873 ocr: 0x00200000 6874 type: SD 6875 date: 01/2009 6876 hwrev: 0x2 6877 dsr: 0x404 6878 serial: 0x00000069 6879 erase_size: 512 6880 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 6881 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 6882 scr: 0285808300000000 6883 oemid: 0x3432 6884 preferred_erase_size: 4194304 6885 name: SD16G 6886 6887 ### Boot system health: 6888 6889 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 6890 14:38:29 1512 MHz 1.17 39% 18% 13% 0% 6% 0% 50.8 °C 0/5 6891 14:38:29 1512 MHz 1.17 95% 32% 36% 0% 25% 0% 50.8 °C 0/5 6892 14:38:30 1512 MHz 1.17 100% 34% 57% 1% 7% 0% 49.7 °C 0/5 6893 14:38:30 1512 MHz 1.17 99% 27% 42% 0% 29% 0% 49.7 °C 0/5 6894 14:38:31 1512 MHz 1.17 94% 10% 12% 1% 71% 0% 50.2 °C 0/5 6895 6896 ### Activated 1 lzo zram swap devices with 482MB each. 6897 ### Activated Armbian ramlog partition with lz4 compression 6898 6899 Mon Sep 25 03:19:04 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 6900 6901 ### dmesg: 6902 6903 [ 0.000000] Booting Linux on physical CPU 0x0 6904 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 6905 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 6906 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 6907 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 6908 [ 0.000000] On node 0 totalpages: 262144 6909 [ 0.000000] DMA zone: 4096 pages used for memmap 6910 [ 0.000000] DMA zone: 0 pages reserved 6911 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 6912 [ 0.000000] psci: probing for conduit method from DT. 6913 [ 0.000000] psci: PSCIv1.0 detected in firmware. 6914 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 6915 [ 0.000000] psci: Trusted OS migration not required 6916 [ 0.000000] psci: SMC Calling Convention v1.0 6917 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 6918 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 6919 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 6920 [ 0.000000] Detected VIPT I-cache on CPU0 6921 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 6922 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 6923 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 6924 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 6925 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 6926 [ 0.000000] log_buf_len min size: 131072 bytes 6927 [ 0.000000] log_buf_len: 524288 bytes 6928 [ 0.000000] early log buf free: 129352(98%) 6929 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 6930 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 6931 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 6932 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 6933 [ 0.000000] Virtual kernel memory layout: 6934 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 6935 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 6936 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 6937 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 6938 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 6939 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 6940 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 6941 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 6942 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 6943 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 6944 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 6945 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 6946 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 6947 [ 0.000000] Preemptible hierarchical RCU implementation. 6948 [ 0.000000] Build-time adjustment of leaf fanout to 64. 6949 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 6950 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 6951 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 6952 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 6953 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 6954 [ 0.000233] Console: colour dummy device 80x25 6955 [ 0.000248] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 6956 [ 0.000257] pid_max: default: 32768 minimum: 301 6957 [ 0.000453] Security Framework initialized 6958 [ 0.000462] AppArmor: AppArmor disabled by boot time parameter 6959 [ 0.000578] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 6960 [ 0.000584] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 6961 [ 0.001853] sched-energy: CPU device node has no sched-energy-costs 6962 [ 0.001868] Invalid sched_group_energy for CPU0 6963 [ 0.001875] CPU0: update cpu_capacity 1024 6964 [ 0.008962] ASID allocator initialised with 32768 entries 6965 [ 0.027934] BOOTEVENT: 27.918666: ON 6966 [ 0.055912] Detected VIPT I-cache on CPU1 6967 [ 0.055965] Invalid sched_group_energy for CPU1 6968 [ 0.055970] CPU1: update cpu_capacity 1024 6969 [ 0.055973] CPU1: Booted secondary processor [410fd034] 6970 [ 0.079298] Detected VIPT I-cache on CPU2 6971 [ 0.079335] Invalid sched_group_energy for CPU2 6972 [ 0.079338] CPU2: update cpu_capacity 1024 6973 [ 0.079341] CPU2: Booted secondary processor [410fd034] 6974 [ 0.102698] Detected VIPT I-cache on CPU3 6975 [ 0.102733] Invalid sched_group_energy for CPU3 6976 [ 0.102736] CPU3: update cpu_capacity 1024 6977 [ 0.102739] CPU3: Booted secondary processor [410fd034] 6978 [ 0.102819] Brought up 4 CPUs 6979 [ 0.102827] SMP: Total of 4 processors activated. 6980 [ 0.102835] CPU features: detected feature: 32-bit EL0 Support 6981 [ 0.102841] CPU features: detected feature: Kernel page table isolation (KPTI) 6982 [ 0.106589] CPU: All CPU(s) started at EL1 6983 [ 0.106610] alternatives: patching kernel code 6984 [ 0.106786] Invalid sched_group_energy for CPU3 6985 [ 0.106795] CPU3: update max cpu_capacity 1024 6986 [ 0.106801] Invalid sched_group_energy for Cluster3 6987 [ 0.106806] Invalid sched_group_energy for CPU2 6988 [ 0.106811] Invalid sched_group_energy for Cluster2 6989 [ 0.106816] Invalid sched_group_energy for CPU1 6990 [ 0.106822] Invalid sched_group_energy for Cluster1 6991 [ 0.106826] Invalid sched_group_energy for CPU0 6992 [ 0.106832] Invalid sched_group_energy for Cluster0 6993 [ 0.108261] devtmpfs: initialized 6994 [ 0.112714] CPU1: update max cpu_capacity 1024 6995 [ 0.143376] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 6996 [ 0.143397] futex hash table entries: 1024 (order: 5, 131072 bytes) 6997 [ 0.144050] xor: measuring software checksum speed 6998 [ 0.176262] 8regs : 1933.200 MB/sec 6999 [ 0.209641] 8regs_prefetch: 1720.800 MB/sec 7000 [ 0.243028] 32regs : 2287.200 MB/sec 7001 [ 0.276414] 32regs_prefetch: 1995.600 MB/sec 7002 [ 0.276420] xor: using function: 32regs (2287.200 MB/sec) 7003 [ 0.276481] atomic64_test: passed 7004 [ 0.276487] pinctrl core: initialized pinctrl subsystem 7005 [ 0.277654] NET: Registered protocol family 16 7006 [ 0.278817] dump_class_init,861, success 7007 [ 0.296479] cpuidle: using governor menu 7008 [ 0.297921] sunxi iommu: irq = 8 7009 [ 0.298250] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 7010 [ 0.298267] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 7011 [ 0.299690] DMA: preallocated 256 KiB pool for atomic allocations 7012 [ 0.301073] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 7013 [ 0.315450] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 7014 [ 0.319373] iommu: Adding device 1c0e000.ve to group 0 7015 [ 0.319896] iommu: Adding device 1c00000.vp9 to group 0 7016 [ 0.331336] iommu: Adding device 1000000.disp to group 0 7017 [ 0.332744] iommu: Adding device 1480000.g2d to group 0 7018 [ 0.335938] iommu: Adding device csi0 to group 0 7019 [ 0.336392] iommu: Adding device csi1 to group 0 7020 [ 0.337594] iommu: Adding device 6600800.vind:scaler@0 to group 0 7021 [ 0.337887] iommu: Adding device 6600800.vind:scaler@1 to group 0 7022 [ 0.338197] iommu: Adding device 6600800.vind:scaler@2 to group 0 7023 [ 0.338484] iommu: Adding device 6600800.vind:scaler@3 to group 0 7024 [ 0.338767] iommu: Adding device 6600800.vind:scaler@4 to group 0 7025 [ 0.339049] iommu: Adding device 6600800.vind:scaler@5 to group 0 7026 [ 0.340020] iommu: Adding device vinc0 to group 0 7027 [ 0.340615] iommu: Adding device vinc1 to group 0 7028 [ 0.342081] iommu: Adding device 1420000.deinterlace to group 0 7029 [ 0.387873] HugeTLB registered 2 MB page size, pre-allocated 0 pages 7030 [ 0.444149] raid6: int64x1 gen() 393 MB/s 7031 [ 0.500762] raid6: int64x1 xor() 364 MB/s 7032 [ 0.557586] raid6: int64x2 gen() 591 MB/s 7033 [ 0.614335] raid6: int64x2 xor() 512 MB/s 7034 [ 0.671105] raid6: int64x4 gen() 840 MB/s 7035 [ 0.727900] raid6: int64x4 xor() 629 MB/s 7036 [ 0.784647] raid6: int64x8 gen() 964 MB/s 7037 [ 0.841457] raid6: int64x8 xor() 655 MB/s 7038 [ 0.898234] raid6: neonx1 gen() 648 MB/s 7039 [ 0.954993] raid6: neonx1 xor() 641 MB/s 7040 [ 1.011776] raid6: neonx2 gen() 976 MB/s 7041 [ 1.068564] raid6: neonx2 xor() 819 MB/s 7042 [ 1.125350] raid6: neonx4 gen() 1287 MB/s 7043 [ 1.182100] raid6: neonx4 xor() 965 MB/s 7044 [ 1.238914] raid6: neonx8 gen() 1324 MB/s 7045 [ 1.295675] raid6: neonx8 xor() 991 MB/s 7046 [ 1.295680] raid6: using algorithm neonx8 gen() 1324 MB/s 7047 [ 1.295685] raid6: .... xor() 991 MB/s, rmw enabled 7048 [ 1.295691] raid6: using intx1 recovery algorithm 7049 [ 1.295829] pwm module init! 7050 [ 1.300128] sunxi-pm debug v3.10 7051 [ 1.301208] SCSI subsystem initialized 7052 [ 1.301846] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 7053 [ 1.301929] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 7054 [ 1.302048] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 7055 [ 1.302569] spi spi0: master is unqueued, this is deprecated 7056 [ 1.302881] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 7057 [ 1.303458] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 7058 [ 1.303540] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 7059 [ 1.303657] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 7060 [ 1.304121] spi spi1: master is unqueued, this is deprecated 7061 [ 1.304430] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 7062 [ 1.305270] usbcore: registered new interface driver usbfs 7063 [ 1.305352] usbcore: registered new interface driver hub 7064 [ 1.305421] usbcore: registered new device driver usb 7065 [ 1.305590] sunxi_i2c_adap_init()2522 - init 7066 [ 1.306154] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 7067 [ 1.306248] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 7068 [ 1.306255] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 7069 [ 1.306271] twi3 supply twi not found, using dummy regulator 7070 [ 1.306354] twi_request_gpio()451 - [i2c3] init name: twi3 7071 [ 1.307109] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 7072 [ 1.307190] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 7073 [ 1.307197] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 7074 [ 1.307211] twi5 supply twi not found, using dummy regulator 7075 [ 1.307285] twi_request_gpio()451 - [i2c5] init name: twi5 7076 [ 1.307766] axp20x-i2c 5-0036: AXP20x variant AXP806 found 7077 [ 1.326358] random: fast init done 7078 [ 1.337543] axp20x-i2c 5-0036: AXP20X driver loaded 7079 [ 1.338038] media: Linux media interface: v0.10 7080 [ 1.338149] Linux video capture interface: v2.00 7081 [ 1.341644] Advanced Linux Sound Architecture Driver Initialized. 7082 [ 1.342376] Bluetooth: Core ver 2.22 7083 [ 1.342475] NET: Registered protocol family 31 7084 [ 1.342481] Bluetooth: HCI device and connection manager initialized 7085 [ 1.342497] Bluetooth: HCI socket layer initialized 7086 [ 1.342510] Bluetooth: L2CAP socket layer initialized 7087 [ 1.342549] Bluetooth: SCO socket layer initialized 7088 [ 1.343348] [DISP]disp_module_init 7089 [ 1.344556] [DISP] parser_disp_init_para,line:1403: 7090 [ 1.344565] of_property_read fb0_width fail 7091 [ 1.344577] [DISP] disp_init,line:2215: 7092 [ 1.344583] smooth display screen:0 type:4 mode:10 7093 [ 1.361858] [DISP]disp_module_init finish 7094 [ 1.362779] clocksource: Switched to clocksource arch_sys_counter 7095 [ 1.363033] VFS: Disk quotas dquot_6.6.0 7096 [ 1.363120] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 7097 [ 1.363882] Console: switching to colour frame buffer device 240x67 7098 [ 1.407227] NET: Registered protocol family 2 7099 [ 1.407354] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 7100 [ 1.426377] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 7101 [ 1.426450] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 7102 [ 1.426572] TCP: Hash tables configured (established 8192 bind 8192) 7103 [ 1.426659] UDP hash table entries: 512 (order: 2, 16384 bytes) 7104 [ 1.426686] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 7105 [ 1.427011] NET: Registered protocol family 1 7106 [ 1.427623] RPC: Registered named UNIX socket transport module. 7107 [ 1.427628] RPC: Registered udp transport module. 7108 [ 1.427631] RPC: Registered tcp transport module. 7109 [ 1.427634] RPC: Registered tcp NFSv4.1 backchannel transport module. 7110 [ 1.427904] Trying to unpack rootfs image as initramfs... 7111 [ 2.181948] Freeing initrd memory: 17256K 7112 [ 2.183090] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 7113 [ 2.186984] audit: initializing netlink subsys (disabled) 7114 [ 2.187040] audit: type=2000 audit(2.183:1): initialized 7115 [ 2.187965] workingset: timestamp_bits=45 max_order=18 bucket_order=0 7116 [ 2.199123] DLM installed 7117 [ 2.200975] squashfs: version 4.0 (2009/01/31) Phillip Lougher 7118 [ 2.201311] Registering sdcardfs 0.1 7119 [ 2.201792] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 7120 [ 2.203342] ntfs: driver 2.1.32 [Flags: R/W]. 7121 [ 2.209765] NET: Registered protocol family 38 7122 [ 2.210131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 7123 [ 2.210270] io scheduler noop registered 7124 [ 2.210278] io scheduler deadline registered 7125 [ 2.210443] io scheduler cfq registered (default) 7126 [ 2.212267] failed to get easy_light_used assign 7127 [ 2.212277] failed to get normal led pin assign 7128 [ 2.212283] failed to get standby led pin assign 7129 [ 2.212288] failed to get standby led pin assign 7130 [ 2.212293] these is zero number for gpio 7131 [ 2.212298] gpio_init finish with uesd 7132 [ 2.215523] uart uart0: get regulator failed 7133 [ 2.215723] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 7134 [ 2.215746] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 7135 [ 2.215842] console [ttyS0] enabled 7136 [ 2.216722] uart uart1: get regulator failed 7137 [ 2.216914] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 7138 [ 2.217636] uart uart5: get regulator failed 7139 [ 2.217824] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 7140 [ 2.219118] misc dump reg init 7141 [ 2.220682] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 7142 [ 2.221027] Unable to detect cache hierarchy for CPU 0 7143 [ 2.235199] brd: module loaded 7144 [ 2.243362] loop: module loaded 7145 [ 2.243551] [NAND][NE] Not found valid nand node on dts 7146 [ 2.244133] Get boot type cmd line fail 7147 [ 2.244717] sunxi-bt soc@03000000:bt: Missing bt_power. 7148 [ 2.244727] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 7149 [ 2.244735] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 7150 [ 2.244741] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 7151 [ 2.244798] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 7152 [ 2.244869] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 7153 [ 2.245712] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 7154 [ 2.245723] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 7155 [ 2.245730] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 7156 [ 2.245737] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 7157 [ 2.245744] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 7158 [ 2.245774] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 7159 [ 2.245806] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 7160 [ 2.245814] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 7161 [ 2.245831] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 7162 [ 2.246834] [ADDR_MGT] addr_mgt_probe: success. 7163 [ 2.253317] tun: Universal TUN/TAP device driver, 1.6 7164 [ 2.253327] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 7165 [ 2.255320] gmac-power0: NULL 7166 [ 2.255329] gmac-power1: NULL 7167 [ 2.255335] gmac-power2: NULL 7168 [ 2.256289] PPP generic driver version 2.4.2 7169 [ 2.256610] PPP BSD Compression module registered 7170 [ 2.256620] PPP Deflate Compression module registered 7171 [ 2.256652] PPP MPPE Compression module registered 7172 [ 2.256661] NET: Registered protocol family 24 7173 [ 2.256695] PPTP driver version 0.8.5 7174 [ 2.257063] usbcore: registered new interface driver r8152 7175 [ 2.257140] usbcore: registered new interface driver asix 7176 [ 2.257232] usbcore: registered new interface driver ax88179_178a 7177 [ 2.257297] usbcore: registered new interface driver cdc_ether 7178 [ 2.257357] usbcore: registered new interface driver net1080 7179 [ 2.257416] usbcore: registered new interface driver cdc_subset 7180 [ 2.257474] usbcore: registered new interface driver zaurus 7181 [ 2.257574] usbcore: registered new interface driver cdc_ncm 7182 [ 2.257581] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 7183 [ 2.257942] get drv_vbus is fail, 84 7184 [ 2.257950] get ehci0-controller, regulator_io is no nocare 7185 [ 2.258212] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 7186 [ 2.258218] [sunxi-ehci0]: Not init ehci0 7187 [ 2.258335] get ehci1-controller, regulator_io is no nocare 7188 [ 2.258519] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 7189 [ 2.258578] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7190 [ 2.258604] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 7191 [ 2.259184] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 7192 [ 2.269475] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 7193 [ 2.269763] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 7194 [ 2.269772] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7195 [ 2.269780] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7196 [ 2.269787] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 7197 [ 2.269794] usb usb1: SerialNumber: sunxi-ehci 7198 [ 2.270655] hub 1-0:1.0: USB hub found 7199 [ 2.270701] hub 1-0:1.0: 1 port detected 7200 [ 2.271370] get drv_vbus is fail, 84 7201 [ 2.271379] get ehci2-controller, regulator_io is no nocare 7202 [ 2.271622] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 7203 [ 2.271682] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7204 [ 2.271707] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 7205 [ 2.271982] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 7206 [ 2.282810] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 7207 [ 2.283024] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 7208 [ 2.283033] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7209 [ 2.283040] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7210 [ 2.283048] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 7211 [ 2.283054] usb usb2: SerialNumber: sunxi-ehci 7212 [ 2.283925] hub 2-0:1.0: USB hub found 7213 [ 2.283969] hub 2-0:1.0: 1 port detected 7214 [ 2.284638] get drv_vbus is fail, 84 7215 [ 2.284646] get ehci3-controller, regulator_io is no nocare 7216 [ 2.284893] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 7217 [ 2.284944] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7218 [ 2.284969] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 7219 [ 2.285283] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 7220 [ 2.296127] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 7221 [ 2.296319] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 7222 [ 2.296328] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7223 [ 2.296336] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7224 [ 2.296343] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 7225 [ 2.296350] usb usb3: SerialNumber: sunxi-ehci 7226 [ 2.297209] hub 3-0:1.0: USB hub found 7227 [ 2.297254] hub 3-0:1.0: 1 port detected 7228 [ 2.298190] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 7229 [ 2.298560] get drv_vbus is fail, 84 7230 [ 2.298568] get ohci0-controller, regulator_io is no nocare 7231 [ 2.298901] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 7232 [ 2.298906] [sunxi-ohci0]: Not init ohci0 7233 [ 2.299023] get ohci1-controller, regulator_io is no nocare 7234 [ 2.299189] hci: request ohci1-controller gpio:80 7235 [ 2.299268] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 7236 [ 2.299319] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 7237 [ 2.299345] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 7238 [ 2.299423] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 7239 [ 2.360295] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 7240 [ 2.360306] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7241 [ 2.360313] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 7242 [ 2.360321] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 7243 [ 2.360328] usb usb4: SerialNumber: sunxi-ohci 7244 [ 2.361205] hub 4-0:1.0: USB hub found 7245 [ 2.361252] hub 4-0:1.0: 1 port detected 7246 [ 2.361920] get drv_vbus is fail, 84 7247 [ 2.361928] get ohci2-controller, regulator_io is no nocare 7248 [ 2.362257] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 7249 [ 2.362308] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 7250 [ 2.362335] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 7251 [ 2.362419] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 7252 [ 2.420292] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 7253 [ 2.420302] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7254 [ 2.420310] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 7255 [ 2.420317] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 7256 [ 2.420324] usb usb5: SerialNumber: sunxi-ohci 7257 [ 2.421182] hub 5-0:1.0: USB hub found 7258 [ 2.421226] hub 5-0:1.0: 1 port detected 7259 [ 2.421906] get drv_vbus is fail, 84 7260 [ 2.421914] get ohci3-controller, regulator_io is no nocare 7261 [ 2.422239] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 7262 [ 2.422288] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 7263 [ 2.422313] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 7264 [ 2.422392] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 7265 [ 2.480310] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 7266 [ 2.480320] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7267 [ 2.480328] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 7268 [ 2.480335] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 7269 [ 2.480342] usb usb6: SerialNumber: sunxi-ohci 7270 [ 2.481176] hub 6-0:1.0: USB hub found 7271 [ 2.481227] hub 6-0:1.0: 1 port detected 7272 [ 2.482149] ohci-platform: OHCI generic platform driver 7273 [ 2.482889] usbcore: registered new interface driver uas 7274 [ 2.483057] usbcore: registered new interface driver usb-storage 7275 [ 2.483145] usbcore: registered new interface driver ums-alauda 7276 [ 2.483221] usbcore: registered new interface driver ums-cypress 7277 [ 2.483291] usbcore: registered new interface driver ums-datafab 7278 [ 2.483370] usbcore: registered new interface driver ums_eneub6250 7279 [ 2.483440] usbcore: registered new interface driver ums-freecom 7280 [ 2.483511] usbcore: registered new interface driver ums-isd200 7281 [ 2.483579] usbcore: registered new interface driver ums-jumpshot 7282 [ 2.483648] usbcore: registered new interface driver ums-karma 7283 [ 2.483717] usbcore: registered new interface driver ums-onetouch 7284 [ 2.483809] usbcore: registered new interface driver ums-realtek 7285 [ 2.483893] usbcore: registered new interface driver ums-sddr09 7286 [ 2.483964] usbcore: registered new interface driver ums-sddr55 7287 [ 2.484034] usbcore: registered new interface driver ums-usbat 7288 [ 2.484183] usb_serial_number:20080411 7289 [ 2.485425] input: sunxi-keyboard as /devices/virtual/input/input0 7290 [ 2.486025] usbcore: registered new interface driver xpad 7291 [ 2.486169] usbcore: registered new interface driver usb_acecad 7292 [ 2.486264] usbcore: registered new interface driver aiptek 7293 [ 2.486343] usbcore: registered new interface driver gtco 7294 [ 2.486422] usbcore: registered new interface driver hanwang 7295 [ 2.486501] usbcore: registered new interface driver kbtab 7296 [ 2.486984] axp2101_pek: axp2101-pek can not register without irq 7297 [ 2.487007] axp2101-pek: probe of axp2101-pek.0 failed with error -22 7298 [ 2.488438] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 7299 [ 2.488502] sunxi-rtc rtc: RTC enabled 7300 [ 2.489001] i2c /dev entries driver 7301 [ 2.489834] lirc_dev: IR Remote Control driver registered, major 244 7302 [ 2.489847] IR NEC protocol handler initialized 7303 [ 2.489853] IR RC5(x/sz) protocol handler initialized 7304 [ 2.489859] IR RC6 protocol handler initialized 7305 [ 2.489865] IR JVC protocol handler initialized 7306 [ 2.489870] IR Sony protocol handler initialized 7307 [ 2.489876] IR SANYO protocol handler initialized 7308 [ 2.489882] IR Sharp protocol handler initialized 7309 [ 2.489888] IR MCE Keyboard/mouse protocol handler initialized 7310 [ 2.489893] IR LIRC bridge handler initialized 7311 [ 2.489898] IR XMP protocol handler initialized 7312 [ 2.490427] sunxi_ir_startup: get ir protocol failed 7313 [ 2.490471] 7040000.s_cir supply ir0 not found, using dummy regulator 7314 [ 2.490653] Registered IR keymap rc_map_sunxi 7315 [ 2.491052] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 7316 [ 2.491306] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 7317 [ 2.492317] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 7318 [ 2.492953] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 7319 [ 2.493657] sunxi cedar version 0.1 7320 [ 2.493847] VE: install start!!! 7321 7322 [ 2.494037] cedar_ve: cedar-ve the get irq is 278 7323 [ 2.494672] VE: get debugfs_mpp_root is NULL, please check mpp 7324 7325 [ 2.494685] VE: sunxi ve debug register driver failed! 7326 7327 [ 2.497872] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 7328 [ 2.499171] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 7329 [ 2.499531] Bluetooth: HCI UART driver ver 2.3 7330 [ 2.499542] Bluetooth: HCI UART protocol H4 registered 7331 [ 2.499547] Bluetooth: HCI UART protocol LL registered 7332 [ 2.499554] Bluetooth: HCI UART protocol Three-wire (H5) registered 7333 [ 2.503735] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 7334 [ 2.503751] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 7335 [ 2.503764] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 7336 [ 2.503776] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 7337 [ 2.503788] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 7338 [ 2.503800] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 7339 [ 2.504220] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 7340 [ 2.504336] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 7341 [ 2.504533] sunxi-mmc sdc0: No vmmc regulator found 7342 [ 2.504540] sunxi-mmc sdc0: No vqmmc regulator found 7343 [ 2.504546] sunxi-mmc sdc0: No vdmmc regulator found 7344 [ 2.504552] sunxi-mmc sdc0: No vd33sw regulator found 7345 [ 2.504559] sunxi-mmc sdc0: No vd18sw regulator found 7346 [ 2.504565] sunxi-mmc sdc0: No vq33sw regulator found 7347 [ 2.504571] sunxi-mmc sdc0: No vq18sw regulator found 7348 [ 2.505287] sunxi-mmc sdc0: set host busy 7349 [ 2.505383] sunxi-mmc sdc0: Got CD GPIO 7350 [ 2.505768] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 7351 [ 2.505807] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 7352 [ 2.519473] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7353 [ 2.536426] sunxi-mmc sdc0: detmode:gpio irq 7354 [ 2.536459] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7355 [ 2.538963] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7356 [ 2.540325] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 7357 [ 2.540461] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 7358 [ 2.540604] sunxi-mmc sdc1: No vmmc regulator found 7359 [ 2.540611] sunxi-mmc sdc1: No vqmmc regulator found 7360 [ 2.540617] sunxi-mmc sdc1: No vdmmc regulator found 7361 [ 2.540624] sunxi-mmc sdc1: No vd33sw regulator found 7362 [ 2.540630] sunxi-mmc sdc1: No vd18sw regulator found 7363 [ 2.540636] sunxi-mmc sdc1: No vq33sw regulator found 7364 [ 2.540642] sunxi-mmc sdc1: No vq18sw regulator found 7365 [ 2.541246] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7366 [ 2.542509] sunxi-mmc sdc1: set host busy 7367 [ 2.542591] mmc:failed to get gpios 7368 [ 2.543734] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7369 [ 2.545000] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 7370 [ 2.559526] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7371 [ 2.567486] mmc0: host does not support reading read-only switch, assuming write-enable 7372 [ 2.569393] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 7373 [ 2.569483] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 7374 [ 2.569629] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 7375 [ 2.569719] mmc0: new high speed SDXC card at address 0001 7376 [ 2.574095] mmcblk0: mmc0:0001 SD16G 59.5 GiB 7377 [ 2.575723] mmcblk0: p1 7378 [ 2.576275] sunxi-mmc sdc1: detmode:manually by software 7379 [ 2.577158] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 7380 [ 2.578572] ledtrig-cpu: registered to indicate activity on CPUs 7381 [ 2.579300] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 7382 [ 2.579336] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7383 [ 2.581911] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7384 [ 2.583839] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 7385 [ 2.584675] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 7386 [ 2.585510] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 7387 [ 2.586345] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 7388 [ 2.586391] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 7389 [ 2.586772] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 7390 [ 2.586778] sunxi_emce_probe()590emce hw init failed! 7391 [ 2.586804] emce: probe of emce failed with error -2 7392 [ 2.587070] hidraw: raw HID events driver (C) Jiri Kosina 7393 [ 2.590537] usbcore: registered new interface driver usbhid 7394 [ 2.590545] usbhid: USB HID core driver 7395 [ 2.591815] optee: probing for conduit method from DT. 7396 [ 2.591827] optee: api uid mismatch 7397 [ 2.592469] usbcore: registered new interface driver snd-usb-audio 7398 [ 2.594847] [sunxi_hdmi_codec_init] driver and deivce register finished. 7399 [ 2.597097] [sunxi_internal_codec_probe]:get audio avcc failed 7400 [ 2.597135] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 7401 [ 2.597359] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 7402 [ 2.599957] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 7403 [ 2.601928] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 7404 [ 2.601941] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 7405 [ 2.604379] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 7406 [ 2.604404] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 7407 [ 2.608337] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 7408 [ 2.609749] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 7409 [ 2.611618] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 7410 [ 2.614757] pktgen: Packet Generator for packet performance testing. Version: 2.75 7411 [ 2.615204] u32 classifier 7412 [ 2.615211] Actions configured 7413 [ 2.615223] Netfilter messages via NETLINK v0.30. 7414 [ 2.615251] nfnl_acct: registering with nfnetlink. 7415 [ 2.615593] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 7416 [ 2.615842] ctnetlink v0.93: registering with nfnetlink. 7417 [ 2.616662] xt_time: kernel timezone is -0000 7418 [ 2.616686] IPVS: Registered protocols (TCP, UDP) 7419 [ 2.616790] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 7420 [ 2.616915] IPVS: Creating netns size=1928 id=0 7421 [ 2.617048] IPVS: ipvs loaded. 7422 [ 2.617056] IPVS: [rr] scheduler registered. 7423 [ 2.617156] ipip: IPv4 and MPLS over IPv4 tunneling driver 7424 [ 2.617859] gre: GRE over IPv4 demultiplexor driver 7425 [ 2.617869] ip_gre: GRE over IPv4 tunneling driver 7426 [ 2.619142] IPv4 over IPsec tunneling driver 7427 [ 2.620078] ip_tables: (C) 2000-2006 Netfilter Core Team 7428 [ 2.620360] arp_tables: arp_tables: (C) 2002 David S. Miller 7429 [ 2.620428] Initializing XFRM netlink socket 7430 [ 2.620461] IPsec XFRM device driver 7431 [ 2.621305] NET: Registered protocol family 10 7432 [ 2.623214] mip6: Mobile IPv6 7433 [ 2.623253] ip6_tables: (C) 2000-2006 Netfilter Core Team 7434 [ 2.624571] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 7435 [ 2.626483] NET: Registered protocol family 17 7436 [ 2.626533] NET: Registered protocol family 15 7437 [ 2.626696] Bridge firewalling registered 7438 [ 2.626857] Bluetooth: RFCOMM TTY layer initialized 7439 [ 2.626878] Bluetooth: RFCOMM socket layer initialized 7440 [ 2.626915] Bluetooth: RFCOMM ver 1.11 7441 [ 2.626930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 7442 [ 2.626936] Bluetooth: BNEP filters: protocol multicast 7443 [ 2.626950] Bluetooth: BNEP socket layer initialized 7444 [ 2.626955] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 7445 [ 2.626967] Bluetooth: HIDP socket layer initialized 7446 [ 2.627052] l2tp_core: L2TP core driver, V2.0 7447 [ 2.627068] l2tp_ppp: PPPoL2TP kernel driver, V2.0 7448 [ 2.627074] 8021q: 802.1Q VLAN Support v1.8 7449 [ 2.627278] sctp: Hash tables configured (bind 256/256) 7450 [ 2.627866] Key type dns_resolver registered 7451 [ 2.628005] Registered cp15_barrier emulation handler 7452 [ 2.628017] Registered setend emulation handler 7453 [ 2.628922] registered taskstats version 1 7454 [ 2.640553] zswap: default zpool zbud not available 7455 [ 2.640561] zswap: pool creation failed 7456 [ 2.643425] Btrfs loaded, crc32c=crc32c-arm64-hw 7457 [ 2.644174] HDMI 2.0 driver init start! 7458 [ 2.644189] boot_hdmi=true 7459 [ 2.645058] Can not find the node of esm 7460 [ 2.645079] ERROR: pinctrl_get for HDMI2.0 DDC fail 7461 [ 2.645170] Get hdmi_power0:vcc-hdmi 7462 [ 2.645210] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 7463 [ 2.645401] Get hdmi_power1:vdd-hdmi 7464 [ 2.645425] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 7465 [ 2.647008] hdmi_cec_init 7466 [ 2.647509] [DISP] disp_device_attached,line:146: 7467 [ 2.647519] attached ok, mgr0<-->device0, type=4 7468 [ 2.647529] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 7469 [ 2.647541] [DISP] disp_hdmi_set_mode,line:648: 7470 [ 2.647546] hdmi_set_mode is null! 7471 [ 2.649787] HDMI2.0 module init end 7472 [ 2.660885] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 7473 [ 2.664523] cpu cpu1: opp_list_debug_create_link: Failed to create link 7474 [ 2.664535] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 7475 [ 2.664568] cpu cpu2: opp_list_debug_create_link: Failed to create link 7476 [ 2.664575] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 7477 [ 2.664605] cpu cpu3: opp_list_debug_create_link: Failed to create link 7478 [ 2.664613] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 7479 [ 2.666916] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 7480 [ 2.667820] get det_vbus is fail, 84 7481 [ 2.667827] get id is fail, 84 7482 [ 2.668300] sunxi-rtc rtc: setting system clock to 2023-09-25 18:18:46 UTC (1695665926) 7483 [ 2.672091] ALSA device list: 7484 [ 2.672099] #0: audiocodec 7485 [ 2.672103] #1: sndahub 7486 [ 2.672106] #2: sndhdmi 7487 [ 2.673747] Freeing unused kernel memory: 3008K 7488 [ 2.718922] random: systemd-udevd: uninitialized urandom read (16 bytes read) 7489 [ 2.721056] random: systemd-udevd: uninitialized urandom read (16 bytes read) 7490 [ 2.724330] random: systemd-udevd: uninitialized urandom read (16 bytes read) 7491 [ 2.796516] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 7492 [ 2.959558] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 7493 [ 3.052820] HDMI cable is connected 7494 [ 3.309468] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 7495 [ 3.529904] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 7496 [ 3.529914] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 7497 [ 3.529919] usb 4-1: Product: Rapoo 2.4G Wireless Device 7498 [ 3.529924] usb 4-1: Manufacturer: RAPOO 7499 [ 3.537841] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 7500 [ 3.538427] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 7501 [ 3.544586] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 7502 [ 3.600307] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 7503 [ 3.604165] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 7504 [ 3.661441] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 7505 [ 4.240626] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 7506 [ 5.145795] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 7507 [ 5.146414] cgroup: cgroup2: unknown option "nsdelegate" 7508 [ 5.166417] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 7509 [ 5.166442] systemd[1]: Detected architecture arm64. 7510 [ 5.167573] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 7511 [ 5.177663] systemd[1]: Hostname set to <opi>. 7512 [ 5.204773] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 7513 [ 6.811857] (sd-execut[1456]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 7514 [ 6.829498] 7515 insmod_device_driver 7516 7517 [ 6.829774] device_chose finished 124! 7518 [ 7.179240] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 7519 [ 7.418750] systemd[1]: Queued start job for default target graphical.target. 7520 [ 7.426080] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 7521 [ 7.428409] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 7522 [ 7.430737] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 7523 [ 7.432003] systemd[1]: Created slice user.slice - User and Session Slice. 7524 [ 7.432654] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 7525 [ 7.433310] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 7526 [ 7.433681] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 7527 [ 7.434215] systemd[1]: Reached target slices.target - Slice Units. 7528 [ 7.434632] systemd[1]: Reached target swap.target - Swaps. 7529 [ 7.434911] systemd[1]: Reached target time-set.target - System Time Set. 7530 [ 7.435401] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 7531 [ 7.452861] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 7532 [ 7.453967] systemd[1]: Listening on syslog.socket - Syslog Socket. 7533 [ 7.454906] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 7534 [ 7.455555] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 7535 [ 7.457208] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 7536 [ 7.458156] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 7537 [ 7.459235] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 7538 [ 7.461469] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 7539 [ 7.462357] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 7540 [ 7.466421] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 7541 [ 7.471032] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 7542 [ 7.475978] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 7543 [ 7.477424] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 7544 [ 7.478405] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 7545 [ 7.486045] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 7546 [ 7.491690] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 7547 [ 7.497469] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 7548 [ 7.506003] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 7549 [ 7.515590] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 7550 [ 7.527791] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 7551 [ 7.535173] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 7552 [ 7.543132] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 7553 [ 7.551053] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 7554 [ 7.552604] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 7555 [ 7.562751] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 7556 [ 7.569321] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 7557 [ 7.574418] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 7558 [ 7.584799] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 7559 [ 7.587299] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 7560 [ 7.589247] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 7561 [ 7.592005] fuse init (API version 7.26) 7562 [ 7.593312] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 7563 [ 7.599112] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 7564 [ 7.603263] systemd[1]: modprobe@configfs.service: Deactivated successfully. 7565 [ 7.603890] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 7566 [ 7.608223] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 7567 [ 7.644815] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 7568 [ 7.656743] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 7569 [ 7.662023] systemd[1]: modprobe@drm.service: Deactivated successfully. 7570 [ 7.662567] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 7571 [ 7.664769] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 7572 [ 7.665330] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 7573 [ 7.667531] systemd[1]: modprobe@fuse.service: Deactivated successfully. 7574 [ 7.668055] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 7575 [ 7.670976] systemd[1]: modprobe@loop.service: Deactivated successfully. 7576 [ 7.675122] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 7577 [ 7.683286] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 7578 [ 7.684222] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 7579 [ 7.684232] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 7580 [ 7.684421] spidev spi1.1: Deleting spi1.1 7581 [ 7.685390] fbtft_device: GPIOS used by 'fb_st7735r': 7582 [ 7.685397] fbtft_device: 'reset' = GPIO73 7583 [ 7.685401] fbtft_device: 'dc' = GPIO70 7584 [ 7.685412] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 7585 [ 7.685418] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 7586 [ 7.696780] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 7587 [ 7.722550] WCN: marlin_init entry! 7588 [ 7.723788] WCN: marlin_parse_dt reset gpio=211 7589 [ 7.723799] WCN_ERR: gpio reset request err: 211 7590 [ 7.723804] WCN: wcn config bt wake host 7591 [ 7.724317] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 7592 [ 7.724446] WCN: wcn config wifi wake host 7593 [ 7.724465] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 7594 [ 7.728152] sdiohal:sdiohal_init ok 7595 [ 7.729058] WCN: marlin_probe ok! 7596 [ 7.737855] mtty_probe init device addr: 0xffffffc0095b6e00 7597 [ 7.738035] -->rfkill_bluetooth_init 7598 [ 7.738242] <--rfkill_bluetooth_init 7599 [ 7.750168] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 7600 [ 7.758288] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 7601 [ 7.764967] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 7602 [ 7.765975] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 7603 [ 7.782030] WCN: start_marlin [MARLIN_WIFI] 7604 [ 7.782044] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 7605 [ 7.782048] WCN: the first power on start 7606 [ 7.791125] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 7607 [ 7.791851] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 7608 [ 7.798448] systemd[1]: Starting systemd-sysusers.service - Create System Users... 7609 [ 7.804260] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 7610 [ 7.807510] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 7611 [ 7.825607] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 7612 [ 7.884017] systemd[1]: Finished systemd-sysusers.service - Create System Users. 7613 [ 7.890545] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 7614 [ 7.896198] WCN: marlin chip en pull up 7615 [ 7.922933] sdiohal:sdiohal_scan_card 7616 [ 7.922967] sunxi-wlan soc@03000000:wlan: bus_index: 1 7617 [ 7.923018] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 7618 [ 7.939528] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7619 [ 7.960381] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 7620 [ 7.961290] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 7621 [ 7.961331] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7622 [ 7.963903] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7623 [ 7.967016] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7624 [ 7.982832] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7625 [ 7.989419] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 7626 [ 7.991496] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 7627 [ 7.993907] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 7628 [ 7.994700] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 7629 [ 7.994798] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 7630 [ 7.995529] mmc1: new ultra high speed SDR104 SDIO card at address 8800 7631 [ 7.996246] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 7632 [ 7.996461] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 7633 [ 7.996490] WCN: marlin_scan_finish! 7634 [ 7.996494] sdiohal:probe ok 7635 [ 7.996505] sdiohal:scan end! 7636 [ 7.996511] WCN: then marlin start to download 7637 [ 7.996551] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 7638 [ 7.997527] systemd[1]: Mounting tmp.mount - /tmp... 7639 [ 8.033608] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 7640 [ 8.038411] systemd[1]: Mounted tmp.mount - /tmp. 7641 [ 8.041135] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 7642 [ 8.043567] systemd[1]: Reached target local-fs.target - Local File Systems. 7643 [ 8.048513] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 7644 [ 8.053562] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 7645 [ 8.087280] systemd[1]: Starting console-setup.service - Set console font and keymap... 7646 [ 8.102521] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 7647 [ 8.112421] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 7648 [ 8.130433] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 7649 [ 8.133574] WCN: combin_img 0 marlin_firmware_write finish and successful 7650 [ 8.133756] WCN: marlin_start_run read reset reg val:0x1 7651 [ 8.133760] WCN: after do marlin_start_run reset reg val:0x0 7652 [ 8.133966] WCN: s_marlin_bootup_time=8133959468 7653 [ 8.138879] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 7654 [ 8.139807] WCN: clock mode: TSX 7655 [ 8.140084] WCN: marlin_write_cali_data sync init_state:0x1a0f50 7656 [ 8.147303] systemd[1]: Starting ufw.service - Uncomplicated firewall... 7657 [ 8.151926] systemd[1]: Finished console-setup.service - Set console font and keymap. 7658 [ 8.164753] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 7659 [ 8.167222] WCN: marlin_write_cali_data sync init_state:0x1a0f50 7660 [ 8.182202] systemd[1]: Received SIGRTMIN+20 from PID 1419 (plymouthd). 7661 [ 8.193224] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 7662 [ 8.193235] WCN: sdio_config bt_wake_host trigger:[high] 7663 [ 8.193239] WCN: sdio_config irq:[inband] 7664 [ 8.193244] WCN: sdio_config wl_wake_host trigger:[high] 7665 [ 8.193249] WCN: sdio_config wake_host_level_duration_time:[20ms] 7666 [ 8.193252] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 7667 [ 8.193256] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 7668 [ 8.193618] WCN: marlin_write_cali_data finish 7669 [ 8.193804] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 7670 [ 8.210627] systemd[1]: Finished ufw.service - Uncomplicated firewall. 7671 [ 8.217819] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 7672 [ 8.219776] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 7673 [ 8.222579] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 7674 [ 8.223377] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 7675 [ 8.224142] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 7676 [ 8.227534] systemd[1]: Reached target network-pre.target - Preparation for Network. 7677 [ 8.246350] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 7678 [ 8.270355] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 7679 [ 8.273053] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 7680 [ 8.299706] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 7681 [ 8.327502] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 7682 [ 8.327514] WCN: marlin_bind_verify confuse data: 0x2e197f4f5a117df30c640a9405a3d69 7683 [ 8.327533] WCN: marlin_bind_verify verify data: 0x16d6ab91e1d71b3ae4604f224021aa 7684 [ 8.328066] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 7685 [ 8.353173] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 7686 [ 8.353181] sdiohal:sdiohal_runtime_get entry 7687 [ 8.353343] WCN: get_cp2_version entry! 7688 [ 8.354857] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 7689 [ 8.354887] WCN: switch_cp2_log - close entry! 7690 [ 8.356169] WCN: WCND at cmd read:OK 7691 [ 8.356226] WCN: then marlin download finished and run ok 7692 [ 8.356231] WCN: start_loopcheck 7693 [ 8.374295] WCN: get_board_ant_num [one_ant] 7694 [ 8.374308] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 7695 [ 8.436980] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 7696 [ 8.441339] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 7697 [ 8.449680] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 7698 [ 8.520727] zram: Added device: zram0 7699 [ 8.521818] zram: Added device: zram1 7700 [ 8.522652] zram: Added device: zram2 7701 [ 8.547016] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 7702 [ 8.556837] systemd[1]: Starting networking.service - Raise network interfaces... 7703 [ 8.560976] zswap: can't enable, initialization failed 7704 [ 8.593041] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 7705 [ 8.612058] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 7706 [ 8.622557] zram0: detected capacity change from 0 to 506396672 7707 [ 8.689130] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 7708 [ 8.695579] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 7709 [ 8.697665] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 7710 [ 8.698424] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 7711 [ 8.698850] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 7712 [ 9.164249] systemd[1]: Finished networking.service - Raise network interfaces. 7713 [ 9.885868] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 7714 [ 9.949826] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 7715 [ 10.196492] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 7716 [ 10.835602] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 7717 [ 10.835936] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 7718 [ 10.837595] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 7719 [ 10.838464] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 7720 [ 10.858823] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 7721 [ 10.892384] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 7722 [ 10.902749] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 7723 [ 10.912628] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 7724 [ 10.919820] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 7725 [ 10.927187] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 7726 [ 10.936512] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 7727 [ 10.938331] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 7728 [ 10.941050] systemd[1]: modprobe@loop.service: Deactivated successfully. 7729 [ 10.941884] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 7730 [ 10.954859] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 7731 [ 10.955133] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 7732 [ 11.014423] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 7733 [ 11.017667] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 7734 [ 11.018461] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 7735 [ 11.020090] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 7736 [ 11.054368] sunxi-bt soc@03000000:bt: set block: 0 7737 [ 11.068226] bluetooth_set_power: start_block=0 7738 [ 11.068238] WCN: start_marlin [MARLIN_BLUETOOTH] 7739 [ 11.068249] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 7740 [ 11.068253] WCN: marlin have open, GNSS is closed 7741 [ 11.068258] bluetooth_set_power: end_block=0 7742 [ 11.082041] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 7743 [ 11.101996] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 7744 [ 11.107741] systemd[1]: Starting brltty.service - Braille Device Support... 7745 [ 11.665490] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 7746 [ 11.811684] zram1: detected capacity change from 0 to 52428800 7747 [ 11.867311] systemd[1]: Started brltty.service - Braille Device Support. 7748 [ 11.887015] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 7749 [ 15.912948] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 7750 [ 15.918761] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 7751 [ 15.980222] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 7752 [ 16.099167] systemd[1]: systemd-rfkill.service: Deactivated successfully. 7753 [ 19.866397] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 7754 [ 19.872691] systemd[1]: Starting systemd-journald.service - Journal Service... 7755 [ 20.143398] systemd-journald[1921]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.2 (1658 of 2204 items, 1269760 file size, 765 bytes per hash table item), suggesting rotation. 7756 [ 20.143420] systemd-journald[1921]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 7757 [ 20.150867] systemd[1]: Started systemd-journald.service - Journal Service. 7758 [ 20.197915] systemd-journald[1921]: Received client request to flush runtime journal. 7759 [ 20.271279] systemd-journald[1921]: Data hash table of /var/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 77.0 (3505 of 4551 items, 2621440 file size, 747 bytes per hash table item), suggesting rotation. 7760 [ 20.271303] systemd-journald[1921]: /var/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 7761 [ 20.676205] IPVS: Creating netns size=1928 id=1 7762 7763 ### armbian-release: 7764 7765 # PLEASE DO NOT EDIT THIS FILE 7766 BOARD=orangepizero2 7767 BOARD_NAME="Orange Pi Zero2" 7768 BOARDFAMILY=sun50iw9 7769 BUILD_REPOSITORY_URL=https://github.com/armbian/build 7770 BUILD_REPOSITORY_COMMIT=ac829eb6 7771 LINUXFAMILY=sun50iw9 7772 ARCH=arm64 7773 IMAGE_TYPE=stable 7774 BOARD_TYPE=conf 7775 INITRD_ARCH=arm 7776 KERNEL_IMAGE_TYPE=Image 7777 FORCE_BOOTSCRIPT_UPDATE=yes 7778 VENDOR=Armbian 7779 BOOTSCRIPT_FORCE_UPDATE="yes" 7780 BOOTSCRIPT_DST="boot.cmd" 7781 VERSION=23.8.1 7782 REVISION=23.8.1 7783 BRANCH=legacy 7784 7785 ### boot environment: 7786 7787 verbosity=1 7788 console=serial 7789 #disp_mode=1080p60 7790 #fb0_width=1280 7791 #fb0_height=720 7792 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 7793 rootfstype=ext4 7794 overlays=spi-spidev 7795 param_spidev_spi_bus=1 7796 param_spidev_spi_cs=1 7797 extraargs=fbcon=map:1 7798 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 7799 7800 ### lsusb: 7801 7802 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 7803 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 7804 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 7805 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 7806 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 7807 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 7808 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 7809 7810 ### lscpu: 7811 7812 Architecture: aarch64 7813 CPU op-mode(s): 32-bit, 64-bit 7814 Byte Order: Little Endian 7815 CPU(s): 4 7816 On-line CPU(s) list: 0-3 7817 Vendor ID: ARM 7818 Model name: Cortex-A53 7819 Model: 4 7820 Thread(s) per core: 1 7821 Core(s) per cluster: 4 7822 Socket(s): - 7823 Cluster(s): 1 7824 Stepping: r0p4 7825 CPU(s) scaling MHz: 100% 7826 CPU max MHz: 1512.0000 7827 CPU min MHz: 480.0000 7828 BogoMIPS: 48.00 7829 Flags: fp asimd aes pmull sha1 sha2 crc32 7830 7831 ### cpuinfo: 7832 7833 processor : 0 7834 BogoMIPS : 48.00 7835 Features : fp asimd aes pmull sha1 sha2 crc32 7836 CPU implementer : 0x41 7837 CPU architecture: 8 7838 CPU variant : 0x0 7839 CPU part : 0xd03 7840 CPU revision : 4 7841 7842 processor : 1 7843 BogoMIPS : 48.00 7844 Features : fp asimd aes pmull sha1 sha2 crc32 7845 CPU implementer : 0x41 7846 CPU architecture: 8 7847 CPU variant : 0x0 7848 CPU part : 0xd03 7849 CPU revision : 4 7850 7851 processor : 2 7852 BogoMIPS : 48.00 7853 Features : fp asimd aes pmull sha1 sha2 crc32 7854 CPU implementer : 0x41 7855 CPU architecture: 8 7856 CPU variant : 0x0 7857 CPU part : 0xd03 7858 CPU revision : 4 7859 7860 processor : 3 7861 BogoMIPS : 48.00 7862 Features : fp asimd aes pmull sha1 sha2 crc32 7863 CPU implementer : 0x41 7864 CPU architecture: 8 7865 CPU variant : 0x0 7866 CPU part : 0xd03 7867 CPU revision : 4 7868 7869 7870 ### meminfo: 7871 7872 MemTotal: 989056 kB 7873 MemFree: 791132 kB 7874 MemAvailable: 886204 kB 7875 Buffers: 15672 kB 7876 Cached: 86408 kB 7877 SwapCached: 0 kB 7878 Active: 66432 kB 7879 Inactive: 56804 kB 7880 Active(anon): 21348 kB 7881 Inactive(anon): 632 kB 7882 Active(file): 45084 kB 7883 Inactive(file): 56172 kB 7884 Unevictable: 0 kB 7885 Mlocked: 0 kB 7886 SwapTotal: 494524 kB 7887 SwapFree: 494524 kB 7888 Dirty: 10092 kB 7889 Writeback: 0 kB 7890 AnonPages: 21068 kB 7891 Mapped: 24172 kB 7892 Shmem: 808 kB 7893 Slab: 33212 kB 7894 SReclaimable: 9276 kB 7895 SUnreclaim: 23936 kB 7896 KernelStack: 2544 kB 7897 PageTables: 1056 kB 7898 NFS_Unstable: 0 kB 7899 Bounce: 0 kB 7900 WritebackTmp: 0 kB 7901 CommitLimit: 989052 kB 7902 Committed_AS: 79860 kB 7903 VmallocTotal: 263061440 kB 7904 VmallocUsed: 0 kB 7905 VmallocChunk: 0 kB 7906 CmaTotal: 16384 kB 7907 CmaFree: 7468 kB 7908 HugePages_Total: 0 7909 HugePages_Free: 0 7910 HugePages_Rsvd: 0 7911 HugePages_Surp: 0 7912 Hugepagesize: 2048 kB 7913 7914 ### virtual memory: 7915 7916 vm.admin_reserve_kbytes = 8192 7917 vm.block_dump = 0 7918 vm.compact_unevictable_allowed = 1 7919 vm.dirty_background_bytes = 0 7920 vm.dirty_background_ratio = 10 7921 vm.dirty_bytes = 0 7922 vm.dirty_expire_centisecs = 3000 7923 vm.dirty_ratio = 20 7924 vm.dirtytime_expire_seconds = 43200 7925 vm.dirty_writeback_centisecs = 500 7926 vm.extfrag_threshold = 500 7927 vm.extra_free_kbytes = 0 7928 vm.hugepages_treat_as_movable = 0 7929 vm.hugetlb_shm_group = 0 7930 vm.laptop_mode = 0 7931 vm.legacy_va_layout = 0 7932 vm.lowmem_reserve_ratio = 256 32 7933 vm.max_map_count = 65530 7934 vm.min_free_kbytes = 3937 7935 vm.mmap_min_addr = 4096 7936 vm.mmap_rnd_bits = 18 7937 vm.mmap_rnd_compat_bits = 11 7938 vm.nr_hugepages = 0 7939 vm.nr_overcommit_hugepages = 0 7940 vm.nr_pdflush_threads = 0 7941 vm.oom_dump_tasks = 1 7942 vm.oom_kill_allocating_task = 0 7943 vm.overcommit_kbytes = 0 7944 vm.overcommit_memory = 0 7945 vm.overcommit_ratio = 50 7946 vm.page-cluster = 0 7947 vm.panic_on_oom = 0 7948 vm.percpu_pagelist_fraction = 0 7949 vm.stat_interval = 1 7950 vm.swappiness = 100 7951 vm.user_reserve_kbytes = 29994 7952 vm.vfs_cache_pressure = 100 7953 vm.watermark_scale_factor = 10 7954 7955 ### ip addr: 7956 7957 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 7958 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 7959 inet XXX.XXX.0.1/8 scope host lo 7960 valid_lft forever preferred_lft forever 7961 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 7962 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 7963 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 7964 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 7965 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 7966 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 7967 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 7968 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 7969 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 7970 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 7971 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 7972 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 7973 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 7974 link/tunnel6 :: brd :: 7975 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 7976 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 7977 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 7978 link/tunnel6 :: brd :: 7979 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 7980 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 7981 7982 ### partitions: 7983 7984 major minor #blocks name 7985 7986 179 0 62410752 mmcblk0 7987 179 1 61763584 mmcblk0p1 7988 253 0 494528 zram0 7989 253 1 51200 zram1 7990 7991 ### df: 7992 7993 udev 466M 0 466M 0% /dev 7994 tmpfs 97M 2.1M 95M 3% /run 7995 /dev/mmcblk0p1 58G 7.3G 51G 13% / 7996 tmpfs 483M 0 483M 0% /dev/shm 7997 tmpfs 5.0M 0 5.0M 0% /run/lock 7998 tmpfs 483M 4.0K 483M 1% /tmp 7999 /dev/zram1 47M 9.8M 34M 23% /var/log 8000 8001 ### lsblk: 8002 8003 NAME FSTYPE SIZE MOUNTPOINT UUID 8004 mmcblk0 59.5G 8005 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 8006 zram1 50M /var/log 8007 zram2 0B 8008 8009 ### zramctl: 8010 8011 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 8012 /dev/zram1 lz4 50M 9.8M 2.6M 3.1M 4 /var/log 8013 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 8014 8015 ### mtab: 8016 8017 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 8018 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 8019 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 8020 8021 ### mmc0:0001 info: 8022 8023 manfid: 0x0000fe 8024 cid: fe3432534431364720000000690091f5 8025 fwrev: 0x0 8026 csd: 400e00325b590001dc277f800a40008b 8027 ocr: 0x00200000 8028 type: SD 8029 date: 01/2009 8030 hwrev: 0x2 8031 dsr: 0x404 8032 serial: 0x00000069 8033 erase_size: 512 8034 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 8035 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 8036 scr: 0285808300000000 8037 oemid: 0x3432 8038 preferred_erase_size: 4194304 8039 name: SD16G 8040 8041 ### Boot system health: 8042 8043 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 8044 15:19:07 1512 MHz 1.10 39% 19% 13% 0% 6% 0% 52.2 °C 0/5 8045 15:19:07 1512 MHz 1.10 95% 31% 45% 1% 17% 0% 49.6 °C 0/5 8046 15:19:07 1512 MHz 1.10 99% 29% 48% 0% 20% 0% 49.6 °C 0/5 8047 15:19:08 1512 MHz 1.10 99% 38% 52% 0% 7% 0% 51.7 °C 0/5 8048 15:19:08 1512 MHz 1.10 98% 28% 63% 0% 5% 0% 51.7 °C 0/5 8049 8050 ### Activated 1 lzo zram swap devices with 482MB each. 8051 ### Activated Armbian ramlog partition with lz4 compression 8052 8053 Mon Sep 25 03:30:19 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 8054 8055 ### dmesg: 8056 8057 [ 0.000000] Booting Linux on physical CPU 0x0 8058 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 8059 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 8060 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 8061 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 8062 [ 0.000000] On node 0 totalpages: 262144 8063 [ 0.000000] DMA zone: 4096 pages used for memmap 8064 [ 0.000000] DMA zone: 0 pages reserved 8065 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 8066 [ 0.000000] psci: probing for conduit method from DT. 8067 [ 0.000000] psci: PSCIv1.0 detected in firmware. 8068 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 8069 [ 0.000000] psci: Trusted OS migration not required 8070 [ 0.000000] psci: SMC Calling Convention v1.0 8071 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 8072 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 8073 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 8074 [ 0.000000] Detected VIPT I-cache on CPU0 8075 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 8076 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 8077 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 8078 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 8079 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 8080 [ 0.000000] log_buf_len min size: 131072 bytes 8081 [ 0.000000] log_buf_len: 524288 bytes 8082 [ 0.000000] early log buf free: 129352(98%) 8083 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 8084 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 8085 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 8086 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 8087 [ 0.000000] Virtual kernel memory layout: 8088 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 8089 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 8090 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 8091 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 8092 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 8093 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 8094 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 8095 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 8096 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 8097 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 8098 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 8099 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 8100 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 8101 [ 0.000000] Preemptible hierarchical RCU implementation. 8102 [ 0.000000] Build-time adjustment of leaf fanout to 64. 8103 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 8104 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 8105 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 8106 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 8107 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 8108 [ 0.000226] Console: colour dummy device 80x25 8109 [ 0.000240] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 8110 [ 0.000250] pid_max: default: 32768 minimum: 301 8111 [ 0.000445] Security Framework initialized 8112 [ 0.000453] AppArmor: AppArmor disabled by boot time parameter 8113 [ 0.000570] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 8114 [ 0.000576] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 8115 [ 0.001838] sched-energy: CPU device node has no sched-energy-costs 8116 [ 0.001854] Invalid sched_group_energy for CPU0 8117 [ 0.001861] CPU0: update cpu_capacity 1024 8118 [ 0.008972] ASID allocator initialised with 32768 entries 8119 [ 0.027949] BOOTEVENT: 27.933623: ON 8120 [ 0.055922] Detected VIPT I-cache on CPU1 8121 [ 0.055976] Invalid sched_group_energy for CPU1 8122 [ 0.055979] CPU1: update cpu_capacity 1024 8123 [ 0.055982] CPU1: Booted secondary processor [410fd034] 8124 [ 0.079312] Detected VIPT I-cache on CPU2 8125 [ 0.079350] Invalid sched_group_energy for CPU2 8126 [ 0.079353] CPU2: update cpu_capacity 1024 8127 [ 0.079356] CPU2: Booted secondary processor [410fd034] 8128 [ 0.102713] Detected VIPT I-cache on CPU3 8129 [ 0.102748] Invalid sched_group_energy for CPU3 8130 [ 0.102752] CPU3: update cpu_capacity 1024 8131 [ 0.102754] CPU3: Booted secondary processor [410fd034] 8132 [ 0.102833] Brought up 4 CPUs 8133 [ 0.102841] SMP: Total of 4 processors activated. 8134 [ 0.102849] CPU features: detected feature: 32-bit EL0 Support 8135 [ 0.102855] CPU features: detected feature: Kernel page table isolation (KPTI) 8136 [ 0.106620] CPU: All CPU(s) started at EL1 8137 [ 0.106643] alternatives: patching kernel code 8138 [ 0.106819] Invalid sched_group_energy for CPU3 8139 [ 0.106829] CPU3: update max cpu_capacity 1024 8140 [ 0.106834] Invalid sched_group_energy for Cluster3 8141 [ 0.106839] Invalid sched_group_energy for CPU2 8142 [ 0.106845] Invalid sched_group_energy for Cluster2 8143 [ 0.106849] Invalid sched_group_energy for CPU1 8144 [ 0.106855] Invalid sched_group_energy for Cluster1 8145 [ 0.106860] Invalid sched_group_energy for CPU0 8146 [ 0.106865] Invalid sched_group_energy for Cluster0 8147 [ 0.108291] devtmpfs: initialized 8148 [ 0.112724] CPU1: update max cpu_capacity 1024 8149 [ 0.143412] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 8150 [ 0.143433] futex hash table entries: 1024 (order: 5, 131072 bytes) 8151 [ 0.144092] xor: measuring software checksum speed 8152 [ 0.176256] 8regs : 1933.200 MB/sec 8153 [ 0.209635] 8regs_prefetch: 1720.800 MB/sec 8154 [ 0.243021] 32regs : 2287.200 MB/sec 8155 [ 0.276408] 32regs_prefetch: 1935.600 MB/sec 8156 [ 0.276414] xor: using function: 32regs (2287.200 MB/sec) 8157 [ 0.276474] atomic64_test: passed 8158 [ 0.276480] pinctrl core: initialized pinctrl subsystem 8159 [ 0.277654] NET: Registered protocol family 16 8160 [ 0.278809] dump_class_init,861, success 8161 [ 0.296468] cpuidle: using governor menu 8162 [ 0.297898] sunxi iommu: irq = 8 8163 [ 0.298211] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 8164 [ 0.298228] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 8165 [ 0.299630] DMA: preallocated 256 KiB pool for atomic allocations 8166 [ 0.301010] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 8167 [ 0.315366] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 8168 [ 0.319287] iommu: Adding device 1c0e000.ve to group 0 8169 [ 0.319799] iommu: Adding device 1c00000.vp9 to group 0 8170 [ 0.331254] iommu: Adding device 1000000.disp to group 0 8171 [ 0.332671] iommu: Adding device 1480000.g2d to group 0 8172 [ 0.335875] iommu: Adding device csi0 to group 0 8173 [ 0.336335] iommu: Adding device csi1 to group 0 8174 [ 0.337567] iommu: Adding device 6600800.vind:scaler@0 to group 0 8175 [ 0.337861] iommu: Adding device 6600800.vind:scaler@1 to group 0 8176 [ 0.338173] iommu: Adding device 6600800.vind:scaler@2 to group 0 8177 [ 0.338459] iommu: Adding device 6600800.vind:scaler@3 to group 0 8178 [ 0.338742] iommu: Adding device 6600800.vind:scaler@4 to group 0 8179 [ 0.339026] iommu: Adding device 6600800.vind:scaler@5 to group 0 8180 [ 0.339983] iommu: Adding device vinc0 to group 0 8181 [ 0.340544] iommu: Adding device vinc1 to group 0 8182 [ 0.341998] iommu: Adding device 1420000.deinterlace to group 0 8183 [ 0.391224] HugeTLB registered 2 MB page size, pre-allocated 0 pages 8184 [ 0.447338] raid6: int64x1 gen() 391 MB/s 8185 [ 0.504125] raid6: int64x1 xor() 363 MB/s 8186 [ 0.560790] raid6: int64x2 gen() 590 MB/s 8187 [ 0.617590] raid6: int64x2 xor() 512 MB/s 8188 [ 0.674310] raid6: int64x4 gen() 840 MB/s 8189 [ 0.731025] raid6: int64x4 xor() 628 MB/s 8190 [ 0.787767] raid6: int64x8 gen() 964 MB/s 8191 [ 0.844540] raid6: int64x8 xor() 655 MB/s 8192 [ 0.901328] raid6: neonx1 gen() 648 MB/s 8193 [ 0.958023] raid6: neonx1 xor() 641 MB/s 8194 [ 1.014746] raid6: neonx2 gen() 975 MB/s 8195 [ 1.071510] raid6: neonx2 xor() 819 MB/s 8196 [ 1.128240] raid6: neonx4 gen() 1286 MB/s 8197 [ 1.184979] raid6: neonx4 xor() 965 MB/s 8198 [ 1.241748] raid6: neonx8 gen() 1323 MB/s 8199 [ 1.298459] raid6: neonx8 xor() 991 MB/s 8200 [ 1.298465] raid6: using algorithm neonx8 gen() 1323 MB/s 8201 [ 1.298470] raid6: .... xor() 991 MB/s, rmw enabled 8202 [ 1.298475] raid6: using intx1 recovery algorithm 8203 [ 1.298647] pwm module init! 8204 [ 1.302976] sunxi-pm debug v3.10 8205 [ 1.304067] SCSI subsystem initialized 8206 [ 1.304687] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 8207 [ 1.304772] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 8208 [ 1.304889] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 8209 [ 1.305384] spi spi0: master is unqueued, this is deprecated 8210 [ 1.305695] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 8211 [ 1.306284] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 8212 [ 1.306365] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 8213 [ 1.306483] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 8214 [ 1.306950] spi spi1: master is unqueued, this is deprecated 8215 [ 1.307263] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 8216 [ 1.308058] usbcore: registered new interface driver usbfs 8217 [ 1.308143] usbcore: registered new interface driver hub 8218 [ 1.308221] usbcore: registered new device driver usb 8219 [ 1.308375] sunxi_i2c_adap_init()2522 - init 8220 [ 1.308951] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 8221 [ 1.309047] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 8222 [ 1.309054] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 8223 [ 1.309070] twi3 supply twi not found, using dummy regulator 8224 [ 1.309146] twi_request_gpio()451 - [i2c3] init name: twi3 8225 [ 1.309915] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 8226 [ 1.309994] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 8227 [ 1.310001] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 8228 [ 1.310015] twi5 supply twi not found, using dummy regulator 8229 [ 1.310090] twi_request_gpio()451 - [i2c5] init name: twi5 8230 [ 1.310571] axp20x-i2c 5-0036: AXP20x variant AXP806 found 8231 [ 1.329304] random: fast init done 8232 [ 1.340490] axp20x-i2c 5-0036: AXP20X driver loaded 8233 [ 1.340973] media: Linux media interface: v0.10 8234 [ 1.341049] Linux video capture interface: v2.00 8235 [ 1.341908] Advanced Linux Sound Architecture Driver Initialized. 8236 [ 1.342633] Bluetooth: Core ver 2.22 8237 [ 1.342705] NET: Registered protocol family 31 8238 [ 1.342711] Bluetooth: HCI device and connection manager initialized 8239 [ 1.342727] Bluetooth: HCI socket layer initialized 8240 [ 1.342739] Bluetooth: L2CAP socket layer initialized 8241 [ 1.342777] Bluetooth: SCO socket layer initialized 8242 [ 1.343552] [DISP]disp_module_init 8243 [ 1.344766] [DISP] parser_disp_init_para,line:1403: 8244 [ 1.344776] of_property_read fb0_width fail 8245 [ 1.344788] [DISP] disp_init,line:2215: 8246 [ 1.344794] smooth display screen:0 type:4 mode:10 8247 [ 1.362118] [DISP]disp_module_init finish 8248 [ 1.362980] clocksource: Switched to clocksource arch_sys_counter 8249 [ 1.363241] VFS: Disk quotas dquot_6.6.0 8250 [ 1.363330] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 8251 [ 1.364068] Console: switching to colour frame buffer device 240x67 8252 [ 1.407307] NET: Registered protocol family 2 8253 [ 1.407432] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 8254 [ 1.419902] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 8255 [ 1.419977] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 8256 [ 1.420100] TCP: Hash tables configured (established 8192 bind 8192) 8257 [ 1.420192] UDP hash table entries: 512 (order: 2, 16384 bytes) 8258 [ 1.420220] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 8259 [ 1.420538] NET: Registered protocol family 1 8260 [ 1.421159] RPC: Registered named UNIX socket transport module. 8261 [ 1.421164] RPC: Registered udp transport module. 8262 [ 1.421167] RPC: Registered tcp transport module. 8263 [ 1.421170] RPC: Registered tcp NFSv4.1 backchannel transport module. 8264 [ 1.421447] Trying to unpack rootfs image as initramfs... 8265 [ 2.175632] Freeing initrd memory: 17256K 8266 [ 2.176730] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 8267 [ 2.180610] audit: initializing netlink subsys (disabled) 8268 [ 2.180669] audit: type=2000 audit(2.176:1): initialized 8269 [ 2.181586] workingset: timestamp_bits=45 max_order=18 bucket_order=0 8270 [ 2.192665] DLM installed 8271 [ 2.194509] squashfs: version 4.0 (2009/01/31) Phillip Lougher 8272 [ 2.194846] Registering sdcardfs 0.1 8273 [ 2.195314] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 8274 [ 2.196852] ntfs: driver 2.1.32 [Flags: R/W]. 8275 [ 2.203364] NET: Registered protocol family 38 8276 [ 2.203725] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 8277 [ 2.203867] io scheduler noop registered 8278 [ 2.203874] io scheduler deadline registered 8279 [ 2.204034] io scheduler cfq registered (default) 8280 [ 2.205837] failed to get easy_light_used assign 8281 [ 2.205848] failed to get normal led pin assign 8282 [ 2.205854] failed to get standby led pin assign 8283 [ 2.205858] failed to get standby led pin assign 8284 [ 2.205864] these is zero number for gpio 8285 [ 2.205868] gpio_init finish with uesd 8286 [ 2.209224] uart uart0: get regulator failed 8287 [ 2.209419] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 8288 [ 2.209441] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 8289 [ 2.209530] console [ttyS0] enabled 8290 [ 2.210376] uart uart1: get regulator failed 8291 [ 2.210568] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 8292 [ 2.211256] uart uart5: get regulator failed 8293 [ 2.211441] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 8294 [ 2.212650] misc dump reg init 8295 [ 2.214153] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 8296 [ 2.214492] Unable to detect cache hierarchy for CPU 0 8297 [ 2.228621] brd: module loaded 8298 [ 2.236971] loop: module loaded 8299 [ 2.237161] [NAND][NE] Not found valid nand node on dts 8300 [ 2.237751] Get boot type cmd line fail 8301 [ 2.238358] sunxi-bt soc@03000000:bt: Missing bt_power. 8302 [ 2.238368] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 8303 [ 2.238376] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 8304 [ 2.238383] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 8305 [ 2.238438] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 8306 [ 2.238509] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 8307 [ 2.239340] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 8308 [ 2.239351] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 8309 [ 2.239358] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 8310 [ 2.239365] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 8311 [ 2.239372] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 8312 [ 2.239400] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 8313 [ 2.239433] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 8314 [ 2.239441] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 8315 [ 2.239459] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 8316 [ 2.240488] [ADDR_MGT] addr_mgt_probe: success. 8317 [ 2.247040] tun: Universal TUN/TAP device driver, 1.6 8318 [ 2.247049] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 8319 [ 2.249068] gmac-power0: NULL 8320 [ 2.249077] gmac-power1: NULL 8321 [ 2.249083] gmac-power2: NULL 8322 [ 2.250067] PPP generic driver version 2.4.2 8323 [ 2.250358] PPP BSD Compression module registered 8324 [ 2.250367] PPP Deflate Compression module registered 8325 [ 2.250393] PPP MPPE Compression module registered 8326 [ 2.250401] NET: Registered protocol family 24 8327 [ 2.250436] PPTP driver version 0.8.5 8328 [ 2.250796] usbcore: registered new interface driver r8152 8329 [ 2.250879] usbcore: registered new interface driver asix 8330 [ 2.250978] usbcore: registered new interface driver ax88179_178a 8331 [ 2.251047] usbcore: registered new interface driver cdc_ether 8332 [ 2.251115] usbcore: registered new interface driver net1080 8333 [ 2.251177] usbcore: registered new interface driver cdc_subset 8334 [ 2.251244] usbcore: registered new interface driver zaurus 8335 [ 2.251332] usbcore: registered new interface driver cdc_ncm 8336 [ 2.251338] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 8337 [ 2.251694] get drv_vbus is fail, 84 8338 [ 2.251702] get ehci0-controller, regulator_io is no nocare 8339 [ 2.251972] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 8340 [ 2.251978] [sunxi-ehci0]: Not init ehci0 8341 [ 2.252100] get ehci1-controller, regulator_io is no nocare 8342 [ 2.252283] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 8343 [ 2.252343] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8344 [ 2.252369] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 8345 [ 2.252940] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 8346 [ 2.266333] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 8347 [ 2.266621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 8348 [ 2.266630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8349 [ 2.266638] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8350 [ 2.266645] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 8351 [ 2.266652] usb usb1: SerialNumber: sunxi-ehci 8352 [ 2.267517] hub 1-0:1.0: USB hub found 8353 [ 2.267564] hub 1-0:1.0: 1 port detected 8354 [ 2.268248] get drv_vbus is fail, 84 8355 [ 2.268255] get ehci2-controller, regulator_io is no nocare 8356 [ 2.268498] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 8357 [ 2.268550] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8358 [ 2.268575] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 8359 [ 2.268856] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 8360 [ 2.279667] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 8361 [ 2.279900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 8362 [ 2.279908] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8363 [ 2.279916] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8364 [ 2.279923] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 8365 [ 2.279930] usb usb2: SerialNumber: sunxi-ehci 8366 [ 2.280780] hub 2-0:1.0: USB hub found 8367 [ 2.280827] hub 2-0:1.0: 1 port detected 8368 [ 2.281492] get drv_vbus is fail, 84 8369 [ 2.281501] get ehci3-controller, regulator_io is no nocare 8370 [ 2.281752] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 8371 [ 2.281804] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8372 [ 2.281829] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 8373 [ 2.282118] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 8374 [ 2.292996] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 8375 [ 2.293184] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 8376 [ 2.293193] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8377 [ 2.293201] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8378 [ 2.293208] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 8379 [ 2.293214] usb usb3: SerialNumber: sunxi-ehci 8380 [ 2.294072] hub 3-0:1.0: USB hub found 8381 [ 2.294127] hub 3-0:1.0: 1 port detected 8382 [ 2.295056] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 8383 [ 2.295424] get drv_vbus is fail, 84 8384 [ 2.295433] get ohci0-controller, regulator_io is no nocare 8385 [ 2.295766] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 8386 [ 2.295771] [sunxi-ohci0]: Not init ohci0 8387 [ 2.295894] get ohci1-controller, regulator_io is no nocare 8388 [ 2.296065] hci: request ohci1-controller gpio:80 8389 [ 2.296142] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 8390 [ 2.296193] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 8391 [ 2.296221] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 8392 [ 2.296349] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 8393 [ 2.357161] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 8394 [ 2.357171] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8395 [ 2.357179] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 8396 [ 2.357186] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 8397 [ 2.357193] usb usb4: SerialNumber: sunxi-ohci 8398 [ 2.358062] hub 4-0:1.0: USB hub found 8399 [ 2.358111] hub 4-0:1.0: 1 port detected 8400 [ 2.358785] get drv_vbus is fail, 84 8401 [ 2.358793] get ohci2-controller, regulator_io is no nocare 8402 [ 2.359127] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 8403 [ 2.359176] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 8404 [ 2.359200] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 8405 [ 2.359276] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 8406 [ 2.417156] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 8407 [ 2.417165] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8408 [ 2.417173] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 8409 [ 2.417180] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 8410 [ 2.417187] usb usb5: SerialNumber: sunxi-ohci 8411 [ 2.418050] hub 5-0:1.0: USB hub found 8412 [ 2.418098] hub 5-0:1.0: 1 port detected 8413 [ 2.418769] get drv_vbus is fail, 84 8414 [ 2.418778] get ohci3-controller, regulator_io is no nocare 8415 [ 2.419116] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 8416 [ 2.419164] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 8417 [ 2.419189] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 8418 [ 2.419272] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 8419 [ 2.477167] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 8420 [ 2.477177] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8421 [ 2.477185] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 8422 [ 2.477192] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 8423 [ 2.477199] usb usb6: SerialNumber: sunxi-ohci 8424 [ 2.478053] hub 6-0:1.0: USB hub found 8425 [ 2.478102] hub 6-0:1.0: 1 port detected 8426 [ 2.479025] ohci-platform: OHCI generic platform driver 8427 [ 2.479761] usbcore: registered new interface driver uas 8428 [ 2.479930] usbcore: registered new interface driver usb-storage 8429 [ 2.480022] usbcore: registered new interface driver ums-alauda 8430 [ 2.480105] usbcore: registered new interface driver ums-cypress 8431 [ 2.480180] usbcore: registered new interface driver ums-datafab 8432 [ 2.480252] usbcore: registered new interface driver ums_eneub6250 8433 [ 2.480324] usbcore: registered new interface driver ums-freecom 8434 [ 2.480398] usbcore: registered new interface driver ums-isd200 8435 [ 2.480467] usbcore: registered new interface driver ums-jumpshot 8436 [ 2.480538] usbcore: registered new interface driver ums-karma 8437 [ 2.480610] usbcore: registered new interface driver ums-onetouch 8438 [ 2.480705] usbcore: registered new interface driver ums-realtek 8439 [ 2.480786] usbcore: registered new interface driver ums-sddr09 8440 [ 2.480860] usbcore: registered new interface driver ums-sddr55 8441 [ 2.480930] usbcore: registered new interface driver ums-usbat 8442 [ 2.481078] usb_serial_number:20080411 8443 [ 2.482313] input: sunxi-keyboard as /devices/virtual/input/input0 8444 [ 2.482918] usbcore: registered new interface driver xpad 8445 [ 2.483079] usbcore: registered new interface driver usb_acecad 8446 [ 2.483182] usbcore: registered new interface driver aiptek 8447 [ 2.483274] usbcore: registered new interface driver gtco 8448 [ 2.483354] usbcore: registered new interface driver hanwang 8449 [ 2.483428] usbcore: registered new interface driver kbtab 8450 [ 2.483907] axp2101_pek: axp2101-pek can not register without irq 8451 [ 2.483929] axp2101-pek: probe of axp2101-pek.0 failed with error -22 8452 [ 2.485346] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 8453 [ 2.485413] sunxi-rtc rtc: RTC enabled 8454 [ 2.485898] i2c /dev entries driver 8455 [ 2.486907] lirc_dev: IR Remote Control driver registered, major 244 8456 [ 2.486921] IR NEC protocol handler initialized 8457 [ 2.486927] IR RC5(x/sz) protocol handler initialized 8458 [ 2.486933] IR RC6 protocol handler initialized 8459 [ 2.486938] IR JVC protocol handler initialized 8460 [ 2.486944] IR Sony protocol handler initialized 8461 [ 2.486950] IR SANYO protocol handler initialized 8462 [ 2.486955] IR Sharp protocol handler initialized 8463 [ 2.486961] IR MCE Keyboard/mouse protocol handler initialized 8464 [ 2.486967] IR LIRC bridge handler initialized 8465 [ 2.486973] IR XMP protocol handler initialized 8466 [ 2.487486] sunxi_ir_startup: get ir protocol failed 8467 [ 2.487529] 7040000.s_cir supply ir0 not found, using dummy regulator 8468 [ 2.487721] Registered IR keymap rc_map_sunxi 8469 [ 2.488116] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 8470 [ 2.488357] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 8471 [ 2.489366] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 8472 [ 2.490022] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 8473 [ 2.490724] sunxi cedar version 0.1 8474 [ 2.490913] VE: install start!!! 8475 8476 [ 2.491111] cedar_ve: cedar-ve the get irq is 278 8477 [ 2.491723] VE: get debugfs_mpp_root is NULL, please check mpp 8478 8479 [ 2.491736] VE: sunxi ve debug register driver failed! 8480 8481 [ 2.494939] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 8482 [ 2.496210] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 8483 [ 2.496595] Bluetooth: HCI UART driver ver 2.3 8484 [ 2.496606] Bluetooth: HCI UART protocol H4 registered 8485 [ 2.496611] Bluetooth: HCI UART protocol LL registered 8486 [ 2.496617] Bluetooth: HCI UART protocol Three-wire (H5) registered 8487 [ 2.500827] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 8488 [ 2.500842] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 8489 [ 2.500856] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 8490 [ 2.500867] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 8491 [ 2.500880] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 8492 [ 2.500892] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 8493 [ 2.501309] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 8494 [ 2.501428] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 8495 [ 2.501623] sunxi-mmc sdc0: No vmmc regulator found 8496 [ 2.501630] sunxi-mmc sdc0: No vqmmc regulator found 8497 [ 2.501636] sunxi-mmc sdc0: No vdmmc regulator found 8498 [ 2.501643] sunxi-mmc sdc0: No vd33sw regulator found 8499 [ 2.501649] sunxi-mmc sdc0: No vd18sw regulator found 8500 [ 2.501655] sunxi-mmc sdc0: No vq33sw regulator found 8501 [ 2.501661] sunxi-mmc sdc0: No vq18sw regulator found 8502 [ 2.502371] sunxi-mmc sdc0: set host busy 8503 [ 2.502473] sunxi-mmc sdc0: Got CD GPIO 8504 [ 2.502857] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 8505 [ 2.502895] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 8506 [ 2.516376] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8507 [ 2.533298] sunxi-mmc sdc0: detmode:gpio irq 8508 [ 2.533332] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8509 [ 2.535844] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8510 [ 2.536714] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 8511 [ 2.536825] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 8512 [ 2.536966] sunxi-mmc sdc1: No vmmc regulator found 8513 [ 2.536973] sunxi-mmc sdc1: No vqmmc regulator found 8514 [ 2.536980] sunxi-mmc sdc1: No vdmmc regulator found 8515 [ 2.536986] sunxi-mmc sdc1: No vd33sw regulator found 8516 [ 2.536992] sunxi-mmc sdc1: No vd18sw regulator found 8517 [ 2.536998] sunxi-mmc sdc1: No vq33sw regulator found 8518 [ 2.537004] sunxi-mmc sdc1: No vq18sw regulator found 8519 [ 2.537718] sunxi-mmc sdc1: set host busy 8520 [ 2.537803] mmc:failed to get gpios 8521 [ 2.538013] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8522 [ 2.538075] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 8523 [ 2.540529] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8524 [ 2.553046] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8525 [ 2.564072] mmc0: host does not support reading read-only switch, assuming write-enable 8526 [ 2.565936] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 8527 [ 2.566012] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 8528 [ 2.566157] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 8529 [ 2.566246] mmc0: new high speed SDXC card at address 0001 8530 [ 2.567310] mmcblk0: mmc0:0001 SD16G 59.5 GiB 8531 [ 2.568929] mmcblk0: p1 8532 [ 2.569701] sunxi-mmc sdc1: detmode:manually by software 8533 [ 2.572007] ledtrig-cpu: registered to indicate activity on CPUs 8534 [ 2.572640] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 8535 [ 2.573501] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 8536 [ 2.573535] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8537 [ 2.576038] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8538 [ 2.577979] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 8539 [ 2.578814] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 8540 [ 2.579346] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 8541 [ 2.579356] sunxi_emce_probe()590emce hw init failed! 8542 [ 2.579383] emce: probe of emce failed with error -2 8543 [ 2.579661] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 8544 [ 2.579706] hidraw: raw HID events driver (C) Jiri Kosina 8545 [ 2.580515] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 8546 [ 2.580558] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 8547 [ 2.584734] usbcore: registered new interface driver usbhid 8548 [ 2.584742] usbhid: USB HID core driver 8549 [ 2.586156] optee: probing for conduit method from DT. 8550 [ 2.586170] optee: api uid mismatch 8551 [ 2.586791] usbcore: registered new interface driver snd-usb-audio 8552 [ 2.588405] [sunxi_hdmi_codec_init] driver and deivce register finished. 8553 [ 2.590251] [sunxi_internal_codec_probe]:get audio avcc failed 8554 [ 2.590288] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 8555 [ 2.590522] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 8556 [ 2.593057] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 8557 [ 2.595028] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 8558 [ 2.595041] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 8559 [ 2.597331] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 8560 [ 2.597354] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 8561 [ 2.601497] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 8562 [ 2.602879] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 8563 [ 2.604821] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 8564 [ 2.607941] pktgen: Packet Generator for packet performance testing. Version: 2.75 8565 [ 2.608358] u32 classifier 8566 [ 2.608365] Actions configured 8567 [ 2.608377] Netfilter messages via NETLINK v0.30. 8568 [ 2.608412] nfnl_acct: registering with nfnetlink. 8569 [ 2.608756] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 8570 [ 2.609006] ctnetlink v0.93: registering with nfnetlink. 8571 [ 2.609825] xt_time: kernel timezone is -0000 8572 [ 2.609850] IPVS: Registered protocols (TCP, UDP) 8573 [ 2.609966] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 8574 [ 2.610093] IPVS: Creating netns size=1928 id=0 8575 [ 2.610224] IPVS: ipvs loaded. 8576 [ 2.610232] IPVS: [rr] scheduler registered. 8577 [ 2.610330] ipip: IPv4 and MPLS over IPv4 tunneling driver 8578 [ 2.611032] gre: GRE over IPv4 demultiplexor driver 8579 [ 2.611040] ip_gre: GRE over IPv4 tunneling driver 8580 [ 2.612335] IPv4 over IPsec tunneling driver 8581 [ 2.613220] ip_tables: (C) 2000-2006 Netfilter Core Team 8582 [ 2.613513] arp_tables: arp_tables: (C) 2002 David S. Miller 8583 [ 2.613577] Initializing XFRM netlink socket 8584 [ 2.613610] IPsec XFRM device driver 8585 [ 2.614458] NET: Registered protocol family 10 8586 [ 2.616399] mip6: Mobile IPv6 8587 [ 2.616442] ip6_tables: (C) 2000-2006 Netfilter Core Team 8588 [ 2.617778] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 8589 [ 2.619393] NET: Registered protocol family 17 8590 [ 2.619435] NET: Registered protocol family 15 8591 [ 2.619593] Bridge firewalling registered 8592 [ 2.619825] Bluetooth: RFCOMM TTY layer initialized 8593 [ 2.619857] Bluetooth: RFCOMM socket layer initialized 8594 [ 2.619890] Bluetooth: RFCOMM ver 1.11 8595 [ 2.619904] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 8596 [ 2.619910] Bluetooth: BNEP filters: protocol multicast 8597 [ 2.619923] Bluetooth: BNEP socket layer initialized 8598 [ 2.619929] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 8599 [ 2.619940] Bluetooth: HIDP socket layer initialized 8600 [ 2.620040] l2tp_core: L2TP core driver, V2.0 8601 [ 2.620055] l2tp_ppp: PPPoL2TP kernel driver, V2.0 8602 [ 2.620061] 8021q: 802.1Q VLAN Support v1.8 8603 [ 2.620273] sctp: Hash tables configured (bind 256/256) 8604 [ 2.620854] Key type dns_resolver registered 8605 [ 2.620994] Registered cp15_barrier emulation handler 8606 [ 2.621007] Registered setend emulation handler 8607 [ 2.621924] registered taskstats version 1 8608 [ 2.633581] zswap: default zpool zbud not available 8609 [ 2.633589] zswap: pool creation failed 8610 [ 2.636385] Btrfs loaded, crc32c=crc32c-arm64-hw 8611 [ 2.637159] HDMI 2.0 driver init start! 8612 [ 2.637174] boot_hdmi=true 8613 [ 2.637967] Can not find the node of esm 8614 [ 2.637985] ERROR: pinctrl_get for HDMI2.0 DDC fail 8615 [ 2.638077] Get hdmi_power0:vcc-hdmi 8616 [ 2.638116] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 8617 [ 2.638286] Get hdmi_power1:vdd-hdmi 8618 [ 2.638308] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 8619 [ 2.639871] hdmi_cec_init 8620 [ 2.640362] [DISP] disp_device_attached,line:146: 8621 [ 2.640372] attached ok, mgr0<-->device0, type=4 8622 [ 2.640382] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 8623 [ 2.640395] [DISP] disp_hdmi_set_mode,line:648: 8624 [ 2.640399] hdmi_set_mode is null! 8625 [ 2.643344] HDMI2.0 module init end 8626 [ 2.654464] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 8627 [ 2.657947] cpu cpu1: opp_list_debug_create_link: Failed to create link 8628 [ 2.657959] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 8629 [ 2.657991] cpu cpu2: opp_list_debug_create_link: Failed to create link 8630 [ 2.657998] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 8631 [ 2.658028] cpu cpu3: opp_list_debug_create_link: Failed to create link 8632 [ 2.658035] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 8633 [ 2.660318] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 8634 [ 2.661220] get det_vbus is fail, 84 8635 [ 2.661227] get id is fail, 84 8636 [ 2.661721] sunxi-rtc rtc: setting system clock to 2023-09-25 18:30:00 UTC (1695666600) 8637 [ 2.665499] ALSA device list: 8638 [ 2.665507] #0: audiocodec 8639 [ 2.665510] #1: sndahub 8640 [ 2.665514] #2: sndhdmi 8641 [ 2.667177] Freeing unused kernel memory: 3008K 8642 [ 2.712490] random: systemd-udevd: uninitialized urandom read (16 bytes read) 8643 [ 2.714526] random: systemd-udevd: uninitialized urandom read (16 bytes read) 8644 [ 2.717507] random: systemd-udevd: uninitialized urandom read (16 bytes read) 8645 [ 2.790131] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 8646 [ 2.953094] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 8647 [ 3.046476] HDMI cable is connected 8648 [ 3.303019] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 8649 [ 3.523445] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 8650 [ 3.523453] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 8651 [ 3.523458] usb 4-1: Product: Rapoo 2.4G Wireless Device 8652 [ 3.523463] usb 4-1: Manufacturer: RAPOO 8653 [ 3.531450] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 8654 [ 3.531851] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 8655 [ 3.538116] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 8656 [ 3.593821] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 8657 [ 3.597732] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 8658 [ 3.655013] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 8659 [ 4.172009] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 8660 [ 5.088174] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 8661 [ 5.088729] cgroup: cgroup2: unknown option "nsdelegate" 8662 [ 5.108905] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 8663 [ 5.108928] systemd[1]: Detected architecture arm64. 8664 [ 5.110063] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 8665 [ 5.120132] systemd[1]: Hostname set to <opi>. 8666 [ 5.147190] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 8667 [ 6.751702] (sd-execut[1458]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 8668 [ 6.826412] 8669 insmod_device_driver 8670 8671 [ 6.826664] device_chose finished 124! 8672 [ 7.115440] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 8673 [ 7.353360] systemd[1]: Queued start job for default target graphical.target. 8674 [ 7.360912] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 8675 [ 7.363078] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 8676 [ 7.365312] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 8677 [ 7.366692] systemd[1]: Created slice user.slice - User and Session Slice. 8678 [ 7.367364] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 8679 [ 7.367910] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 8680 [ 7.368238] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 8681 [ 7.368754] systemd[1]: Reached target slices.target - Slice Units. 8682 [ 7.369075] systemd[1]: Reached target swap.target - Swaps. 8683 [ 7.369356] systemd[1]: Reached target time-set.target - System Time Set. 8684 [ 7.369884] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 8685 [ 7.387168] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 8686 [ 7.388284] systemd[1]: Listening on syslog.socket - Syslog Socket. 8687 [ 7.389250] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 8688 [ 7.389957] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 8689 [ 7.391577] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 8690 [ 7.392533] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 8691 [ 7.393634] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 8692 [ 7.395836] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 8693 [ 7.396804] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 8694 [ 7.400774] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 8695 [ 7.405320] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 8696 [ 7.410389] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 8697 [ 7.411621] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 8698 [ 7.412593] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 8699 [ 7.420265] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 8700 [ 7.425722] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 8701 [ 7.431650] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 8702 [ 7.440500] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 8703 [ 7.447331] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 8704 [ 7.454548] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 8705 [ 7.462303] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 8706 [ 7.473740] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 8707 [ 7.481344] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 8708 [ 7.482443] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 8709 [ 7.493092] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 8710 [ 7.499560] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 8711 [ 7.506195] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 8712 [ 7.516841] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 8713 [ 7.519005] fuse init (API version 7.26) 8714 [ 7.519490] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 8715 [ 7.522235] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 8716 [ 7.526118] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 8717 [ 7.529936] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 8718 [ 7.533852] systemd[1]: modprobe@configfs.service: Deactivated successfully. 8719 [ 7.534744] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 8720 [ 7.538055] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 8721 [ 7.538688] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 8722 [ 7.541365] systemd[1]: modprobe@drm.service: Deactivated successfully. 8723 [ 7.542298] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 8724 [ 7.574567] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 8725 [ 7.591901] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 8726 [ 7.607877] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 8727 [ 7.608629] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 8728 [ 7.608639] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 8729 [ 7.608821] spidev spi1.1: Deleting spi1.1 8730 [ 7.609454] fbtft_device: GPIOS used by 'fb_st7735r': 8731 [ 7.609461] fbtft_device: 'reset' = GPIO73 8732 [ 7.609465] fbtft_device: 'dc' = GPIO70 8733 [ 7.609475] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 8734 [ 7.609481] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 8735 [ 7.638015] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 8736 [ 7.638919] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 8737 [ 7.645879] systemd[1]: modprobe@fuse.service: Deactivated successfully. 8738 [ 7.646962] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 8739 [ 7.648404] WCN: marlin_init entry! 8740 [ 7.649755] WCN: marlin_parse_dt reset gpio=211 8741 [ 7.649767] WCN_ERR: gpio reset request err: 211 8742 [ 7.649773] WCN: wcn config bt wake host 8743 [ 7.650362] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 8744 [ 7.650505] WCN: wcn config wifi wake host 8745 [ 7.650528] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 8746 [ 7.650657] systemd[1]: modprobe@loop.service: Deactivated successfully. 8747 [ 7.651761] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 8748 [ 7.654271] sdiohal:sdiohal_init ok 8749 [ 7.655500] WCN: marlin_probe ok! 8750 [ 7.664425] mtty_probe init device addr: 0xffffffc009691300 8751 [ 7.664618] -->rfkill_bluetooth_init 8752 [ 7.664783] <--rfkill_bluetooth_init 8753 [ 7.707577] WCN: start_marlin [MARLIN_WIFI] 8754 [ 7.707591] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 8755 [ 7.707594] WCN: the first power on start 8756 [ 7.734127] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 8757 [ 7.741893] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 8758 [ 7.747724] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 8759 [ 7.748381] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 8760 [ 7.754364] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 8761 [ 7.755073] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 8762 [ 7.762283] systemd[1]: Starting systemd-sysusers.service - Create System Users... 8763 [ 7.777941] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 8764 [ 7.789071] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 8765 [ 7.791343] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 8766 [ 7.823067] WCN: marlin chip en pull up 8767 [ 7.846466] systemd[1]: Finished systemd-sysusers.service - Create System Users. 8768 [ 7.849776] sdiohal:sdiohal_scan_card 8769 [ 7.849796] sunxi-wlan soc@03000000:wlan: bus_index: 1 8770 [ 7.849843] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 8771 [ 7.853128] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 8772 [ 7.869767] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8773 [ 7.887224] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 8774 [ 7.888126] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 8775 [ 7.888152] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8776 [ 7.890713] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8777 [ 7.893813] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8778 [ 7.909833] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8779 [ 7.921526] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 8780 [ 7.922310] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 8781 [ 7.922399] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 8782 [ 7.923148] mmc1: new ultra high speed SDR104 SDIO card at address 8800 8783 [ 7.923572] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 8784 [ 7.923777] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 8785 [ 7.923802] WCN: marlin_scan_finish! 8786 [ 7.923806] sdiohal:probe ok 8787 [ 7.923815] sdiohal:scan end! 8788 [ 7.923822] WCN: then marlin start to download 8789 [ 7.923852] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 8790 [ 7.975932] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 8791 [ 8.003941] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 8792 [ 8.009254] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 8793 [ 8.028187] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 8794 [ 8.031986] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 8795 [ 8.034815] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 8796 [ 8.054097] WCN: combin_img 0 marlin_firmware_write finish and successful 8797 [ 8.054258] WCN: marlin_start_run read reset reg val:0x1 8798 [ 8.054262] WCN: after do marlin_start_run reset reg val:0x0 8799 [ 8.054446] WCN: s_marlin_bootup_time=8054442843 8800 [ 8.059830] WCN: clock mode: TSX 8801 [ 8.060008] WCN: marlin_write_cali_data sync init_state:0x1a0f50 8802 [ 8.086581] WCN: marlin_write_cali_data sync init_state:0x1a0f50 8803 [ 8.103931] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 8804 [ 8.113313] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 8805 [ 8.113320] WCN: sdio_config bt_wake_host trigger:[high] 8806 [ 8.113324] WCN: sdio_config irq:[inband] 8807 [ 8.113328] WCN: sdio_config wl_wake_host trigger:[high] 8808 [ 8.113333] WCN: sdio_config wake_host_level_duration_time:[20ms] 8809 [ 8.113336] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 8810 [ 8.113341] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 8811 [ 8.113836] WCN: marlin_write_cali_data finish 8812 [ 8.114047] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 8813 [ 8.140045] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 8814 [ 8.166816] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 8815 [ 8.194046] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 8816 [ 8.220108] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 8817 [ 8.246820] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 8818 [ 8.246830] WCN: marlin_bind_verify confuse data: 0x2e197f4f5a117df30c640a9405a3d69 8819 [ 8.246846] WCN: marlin_bind_verify verify data: 0x16d6ab91e1d71b3ae4604f224021aa 8820 [ 8.247587] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 8821 [ 8.273306] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 8822 [ 8.273314] sdiohal:sdiohal_runtime_get entry 8823 [ 8.273538] WCN: get_cp2_version entry! 8824 [ 8.275022] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 8825 [ 8.276174] WCN: switch_cp2_log - close entry! 8826 [ 8.277357] WCN: WCND at cmd read:OK 8827 [ 8.277407] WCN: then marlin download finished and run ok 8828 [ 8.277413] WCN: start_loopcheck 8829 [ 8.291310] WCN: get_board_ant_num [one_ant] 8830 [ 8.291321] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 8831 [ 8.351243] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 8832 [ 8.355693] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 8833 [ 8.363121] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 8834 [ 8.426057] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 8835 [ 8.473186] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 8836 [ 8.482704] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 8837 [ 8.556898] systemd[1]: Mounting tmp.mount - /tmp... 8838 [ 8.563210] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 8839 [ 8.577168] systemd[1]: Mounted tmp.mount - /tmp. 8840 [ 8.583105] systemd[1]: Reached target local-fs.target - Local File Systems. 8841 [ 8.595141] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 8842 [ 8.603193] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 8843 [ 8.614005] systemd[1]: Starting console-setup.service - Set console font and keymap... 8844 [ 8.630626] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 8845 [ 8.657014] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 8846 [ 8.667052] systemd[1]: Starting ufw.service - Uncomplicated firewall... 8847 [ 8.672909] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 8848 [ 8.711853] systemd[1]: Finished console-setup.service - Set console font and keymap. 8849 [ 8.715338] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 8850 [ 8.718391] systemd[1]: Received SIGRTMIN+20 from PID 1420 (plymouthd). 8851 [ 8.719486] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 8852 [ 8.720812] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 8853 [ 8.721402] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 8854 [ 8.722909] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 8855 [ 8.729296] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 8856 [ 8.730244] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 8857 [ 8.733715] systemd[1]: Finished ufw.service - Uncomplicated firewall. 8858 [ 8.735896] systemd[1]: Reached target network-pre.target - Preparation for Network. 8859 [ 8.820062] systemd[1]: Starting networking.service - Raise network interfaces... 8860 [ 8.823212] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 8861 [ 9.134198] zram: Added device: zram0 8862 [ 9.137482] zram: Added device: zram1 8863 [ 9.140693] zram: Added device: zram2 8864 [ 9.213815] zswap: can't enable, initialization failed 8865 [ 9.283892] zram0: detected capacity change from 0 to 506396672 8866 [ 9.468604] systemd[1]: Finished networking.service - Raise network interfaces. 8867 [ 10.026558] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 8868 [ 10.087472] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 8869 [ 10.255438] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 8870 [ 10.838127] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 8871 [ 10.838386] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 8872 [ 10.842784] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 8873 [ 10.844808] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 8874 [ 10.862392] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 8875 [ 10.872755] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 8876 [ 10.902803] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 8877 [ 10.923927] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 8878 [ 10.931494] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 8879 [ 10.932769] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 8880 [ 10.936796] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 8881 [ 10.937756] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 8882 [ 10.945788] systemd[1]: modprobe@loop.service: Deactivated successfully. 8883 [ 10.946873] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 8884 [ 10.963034] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 8885 [ 10.963434] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 8886 [ 11.010957] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 8887 [ 11.013289] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 8888 [ 11.014319] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 8889 [ 11.015398] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 8890 [ 11.052518] sunxi-bt soc@03000000:bt: set block: 0 8891 [ 11.064965] bluetooth_set_power: start_block=0 8892 [ 11.064975] WCN: start_marlin [MARLIN_BLUETOOTH] 8893 [ 11.064987] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 8894 [ 11.064992] WCN: marlin have open, GNSS is closed 8895 [ 11.064998] bluetooth_set_power: end_block=0 8896 [ 11.078425] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 8897 [ 11.125453] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 8898 [ 11.131316] systemd[1]: Starting brltty.service - Braille Device Support... 8899 [ 11.848745] systemd[1]: Started brltty.service - Braille Device Support. 8900 [ 11.863372] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 8901 [ 12.318625] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 8902 [ 12.459276] zram1: detected capacity change from 0 to 52428800 8903 [ 16.088924] systemd[1]: systemd-rfkill.service: Deactivated successfully. 8904 [ 16.536118] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 8905 [ 16.542493] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 8906 [ 16.604114] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 8907 [ 20.536223] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 8908 [ 20.542685] systemd[1]: Starting systemd-journald.service - Journal Service... 8909 [ 20.811168] systemd-journald[1921]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.2 (1658 of 2204 items, 1269760 file size, 765 bytes per hash table item), suggesting rotation. 8910 [ 20.811191] systemd-journald[1921]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 8911 [ 20.818287] systemd[1]: Started systemd-journald.service - Journal Service. 8912 [ 20.865608] systemd-journald[1921]: Received client request to flush runtime journal. 8913 [ 21.145803] IPVS: Creating netns size=1928 id=1 8914 8915 ### armbian-release: 8916 8917 # PLEASE DO NOT EDIT THIS FILE 8918 BOARD=orangepizero2 8919 BOARD_NAME="Orange Pi Zero2" 8920 BOARDFAMILY=sun50iw9 8921 BUILD_REPOSITORY_URL=https://github.com/armbian/build 8922 BUILD_REPOSITORY_COMMIT=ac829eb6 8923 LINUXFAMILY=sun50iw9 8924 ARCH=arm64 8925 IMAGE_TYPE=stable 8926 BOARD_TYPE=conf 8927 INITRD_ARCH=arm 8928 KERNEL_IMAGE_TYPE=Image 8929 FORCE_BOOTSCRIPT_UPDATE=yes 8930 VENDOR=Armbian 8931 BOOTSCRIPT_FORCE_UPDATE="yes" 8932 BOOTSCRIPT_DST="boot.cmd" 8933 VERSION=23.8.1 8934 REVISION=23.8.1 8935 BRANCH=legacy 8936 8937 ### boot environment: 8938 8939 verbosity=1 8940 console=serial 8941 #disp_mode=1080p60 8942 #fb0_width=1280 8943 #fb0_height=720 8944 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 8945 rootfstype=ext4 8946 overlays=spi-spidev 8947 param_spidev_spi_bus=1 8948 param_spidev_spi_cs=1 8949 extraargs=fbcon=map:1 8950 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 8951 8952 ### lsusb: 8953 8954 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 8955 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 8956 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 8957 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 8958 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 8959 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 8960 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 8961 8962 ### lscpu: 8963 8964 Architecture: aarch64 8965 CPU op-mode(s): 32-bit, 64-bit 8966 Byte Order: Little Endian 8967 CPU(s): 4 8968 On-line CPU(s) list: 0-3 8969 Vendor ID: ARM 8970 Model name: Cortex-A53 8971 Model: 4 8972 Thread(s) per core: 1 8973 Core(s) per cluster: 4 8974 Socket(s): - 8975 Cluster(s): 1 8976 Stepping: r0p4 8977 CPU(s) scaling MHz: 100% 8978 CPU max MHz: 1512.0000 8979 CPU min MHz: 480.0000 8980 BogoMIPS: 48.00 8981 Flags: fp asimd aes pmull sha1 sha2 crc32 8982 8983 ### cpuinfo: 8984 8985 processor : 0 8986 BogoMIPS : 48.00 8987 Features : fp asimd aes pmull sha1 sha2 crc32 8988 CPU implementer : 0x41 8989 CPU architecture: 8 8990 CPU variant : 0x0 8991 CPU part : 0xd03 8992 CPU revision : 4 8993 8994 processor : 1 8995 BogoMIPS : 48.00 8996 Features : fp asimd aes pmull sha1 sha2 crc32 8997 CPU implementer : 0x41 8998 CPU architecture: 8 8999 CPU variant : 0x0 9000 CPU part : 0xd03 9001 CPU revision : 4 9002 9003 processor : 2 9004 BogoMIPS : 48.00 9005 Features : fp asimd aes pmull sha1 sha2 crc32 9006 CPU implementer : 0x41 9007 CPU architecture: 8 9008 CPU variant : 0x0 9009 CPU part : 0xd03 9010 CPU revision : 4 9011 9012 processor : 3 9013 BogoMIPS : 48.00 9014 Features : fp asimd aes pmull sha1 sha2 crc32 9015 CPU implementer : 0x41 9016 CPU architecture: 8 9017 CPU variant : 0x0 9018 CPU part : 0xd03 9019 CPU revision : 4 9020 9021 9022 ### meminfo: 9023 9024 MemTotal: 989056 kB 9025 MemFree: 790420 kB 9026 MemAvailable: 885996 kB 9027 Buffers: 15620 kB 9028 Cached: 86968 kB 9029 SwapCached: 0 kB 9030 Active: 65592 kB 9031 Inactive: 58252 kB 9032 Active(anon): 21428 kB 9033 Inactive(anon): 652 kB 9034 Active(file): 44164 kB 9035 Inactive(file): 57600 kB 9036 Unevictable: 0 kB 9037 Mlocked: 0 kB 9038 SwapTotal: 494524 kB 9039 SwapFree: 494524 kB 9040 Dirty: 11316 kB 9041 Writeback: 0 kB 9042 AnonPages: 21292 kB 9043 Mapped: 24272 kB 9044 Shmem: 828 kB 9045 Slab: 33084 kB 9046 SReclaimable: 9272 kB 9047 SUnreclaim: 23812 kB 9048 KernelStack: 2512 kB 9049 PageTables: 1116 kB 9050 NFS_Unstable: 0 kB 9051 Bounce: 0 kB 9052 WritebackTmp: 0 kB 9053 CommitLimit: 989052 kB 9054 Committed_AS: 79636 kB 9055 VmallocTotal: 263061440 kB 9056 VmallocUsed: 0 kB 9057 VmallocChunk: 0 kB 9058 CmaTotal: 16384 kB 9059 CmaFree: 7468 kB 9060 HugePages_Total: 0 9061 HugePages_Free: 0 9062 HugePages_Rsvd: 0 9063 HugePages_Surp: 0 9064 Hugepagesize: 2048 kB 9065 9066 ### virtual memory: 9067 9068 vm.admin_reserve_kbytes = 8192 9069 vm.block_dump = 0 9070 vm.compact_unevictable_allowed = 1 9071 vm.dirty_background_bytes = 0 9072 vm.dirty_background_ratio = 10 9073 vm.dirty_bytes = 0 9074 vm.dirty_expire_centisecs = 3000 9075 vm.dirty_ratio = 20 9076 vm.dirtytime_expire_seconds = 43200 9077 vm.dirty_writeback_centisecs = 500 9078 vm.extfrag_threshold = 500 9079 vm.extra_free_kbytes = 0 9080 vm.hugepages_treat_as_movable = 0 9081 vm.hugetlb_shm_group = 0 9082 vm.laptop_mode = 0 9083 vm.legacy_va_layout = 0 9084 vm.lowmem_reserve_ratio = 256 32 9085 vm.max_map_count = 65530 9086 vm.min_free_kbytes = 3937 9087 vm.mmap_min_addr = 4096 9088 vm.mmap_rnd_bits = 18 9089 vm.mmap_rnd_compat_bits = 11 9090 vm.nr_hugepages = 0 9091 vm.nr_overcommit_hugepages = 0 9092 vm.nr_pdflush_threads = 0 9093 vm.oom_dump_tasks = 1 9094 vm.oom_kill_allocating_task = 0 9095 vm.overcommit_kbytes = 0 9096 vm.overcommit_memory = 0 9097 vm.overcommit_ratio = 50 9098 vm.page-cluster = 0 9099 vm.panic_on_oom = 0 9100 vm.percpu_pagelist_fraction = 0 9101 vm.stat_interval = 1 9102 vm.swappiness = 100 9103 vm.user_reserve_kbytes = 29998 9104 vm.vfs_cache_pressure = 100 9105 vm.watermark_scale_factor = 10 9106 9107 ### ip addr: 9108 9109 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 9110 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 9111 inet XXX.XXX.0.1/8 scope host lo 9112 valid_lft forever preferred_lft forever 9113 inet6 ::1/128 scope host noprefixroute 9114 valid_lft forever preferred_lft forever 9115 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 9116 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 9117 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 9118 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 9119 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 9120 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 9121 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 9122 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 9123 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 9124 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9125 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 9126 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 9127 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 9128 link/tunnel6 :: brd :: 9129 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 9130 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 9131 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 9132 link/tunnel6 :: brd :: 9133 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 9134 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 9135 9136 ### partitions: 9137 9138 major minor #blocks name 9139 9140 179 0 62410752 mmcblk0 9141 179 1 61763584 mmcblk0p1 9142 253 0 494528 zram0 9143 253 1 51200 zram1 9144 9145 ### df: 9146 9147 udev 466M 0 466M 0% /dev 9148 tmpfs 97M 2.1M 95M 3% /run 9149 /dev/mmcblk0p1 58G 7.3G 51G 13% / 9150 tmpfs 483M 0 483M 0% /dev/shm 9151 tmpfs 5.0M 0 5.0M 0% /run/lock 9152 tmpfs 483M 4.0K 483M 1% /tmp 9153 /dev/zram1 47M 11M 33M 25% /var/log 9154 9155 ### lsblk: 9156 9157 NAME FSTYPE SIZE MOUNTPOINT UUID 9158 mmcblk0 59.5G 9159 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 9160 zram1 50M /var/log 9161 zram2 0B 9162 9163 ### zramctl: 9164 9165 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 9166 /dev/zram1 lz4 50M 10.8M 2.9M 3.3M 4 /var/log 9167 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 9168 9169 ### mtab: 9170 9171 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 9172 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 9173 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 9174 9175 ### mmc0:0001 info: 9176 9177 manfid: 0x0000fe 9178 cid: fe3432534431364720000000690091f5 9179 fwrev: 0x0 9180 csd: 400e00325b590001dc277f800a40008b 9181 ocr: 0x00200000 9182 type: SD 9183 date: 01/2009 9184 hwrev: 0x2 9185 dsr: 0x404 9186 serial: 0x00000069 9187 erase_size: 512 9188 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 9189 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 9190 scr: 0285808300000000 9191 oemid: 0x3432 9192 preferred_erase_size: 4194304 9193 name: SD16G 9194 9195 ### Boot system health: 9196 9197 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 9198 15:30:21 1512 MHz 1.31 38% 18% 13% 0% 6% 0% 50.1 °C 0/5 9199 15:30:22 1512 MHz 1.31 99% 38% 49% 0% 11% 0% 50.1 °C 0/5 9200 15:30:22 1512 MHz 1.31 100% 33% 60% 1% 4% 0% 51.3 °C 0/5 9201 15:30:22 1512 MHz 1.31 100% 42% 51% 1% 4% 0% 51.3 °C 0/5 9202 15:30:23 1512 MHz 4.81 98% 29% 56% 1% 10% 0% 51.3 °C 0/5 9203 9204 ### lsusb: 9205 9206 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 9207 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 9208 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 9209 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 9210 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 9211 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 9212 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 9213 9214 /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M 9215 /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M 9216 /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M 9217 |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M 9218 |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M 9219 |__ Port 1: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M 9220 /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M 9221 /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M 9222 /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M 9223 9224 ### Userland: 9225 9226 PRETTY_NAME="Armbian 23.8.3 bookworm" 9227 ARMBIAN_PRETTY_NAME="Armbian 23.8.3 bookworm" 9228 9229 ### Installed packages: 9230 9231 ii armbian-bookworm-desktop-xfce 23.8.3 all Armbian desktop for Debian bookworm xfce 9232 ii armbian-bsp-cli-orangepizero2-legacy 23.8.1 arm64 Armbian CLI BSP for board 'orangepizero2' branch 'legacy' 9233 ii armbian-config 23.8.3 all Armbian configuration utility 9234 ii armbian-firmware-full 23.02.2 all Linux firmware-full 9235 ii armbian-zsh 23.8.3 all Armbian improved ZShell (oh-my-zsh...) 9236 ii linux-base 4.9 all Linux image base package 9237 ii linux-dtb-legacy-sun50iw9 23.8.1 arm64 Armbian Linux legacy DTBs in /boot/dtb-4.9.318-legacy-sun50iw9 9238 ii linux-image-legacy-sun50iw9 23.8.1 arm64 Armbian Linux legacy kernel image 4.9.318-legacy-sun50iw9 9239 ii linux-libc-dev:arm64 23.02.2 arm64 Armbian Linux support headers for userspace development 9240 ii linux-u-boot-orangepizero2-legacy 23.8.1 arm64 Das U-Boot for orangepizero2 9241 9242 ### Loaded modules: 9243 9244 Module Size Used by 9245 zram 36864 2 9246 fb_st7735r 16384 1 9247 sprdwl_ng 442368 0 9248 sprdbt_tty 40960 2 9249 uwe5622_bsp_sdio 307200 2 sprdbt_tty,sprdwl_ng 9250 fbtft_device 61440 0 9251 fbtft 57344 2 fbtft_device,fb_st7735r 9252 fb_sys_fops 16384 1 fbtft 9253 syscopyarea 16384 1 fbtft 9254 sysfillrect 16384 1 fbtft 9255 sysimgblt 16384 1 fbtft 9256 fuse 139264 3 9257 9258 ### Current system health: 9259 9260 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 9261 17:08:45 1512 MHz 2.63 25% 5% 14% 0% 4% 0% 44.2 °C 0/5 9262 17:08:45 1512 MHz 2.63 5% 2% 0% 1% 0% 0% 44.2 °C 0/5 9263 17:08:45 1512 MHz 2.63 8% 5% 2% 0% 0% 0% 45.7 °C 0/5 9264 17:08:46 1512 MHz 2.63 5% 2% 0% 2% 0% 0% 45.7 °C 0/5 9265 17:08:46 1512 MHz 2.63 10% 5% 5% 0% 0% 0% 45.7 °C 0/5 9266 17:08:48 1512 MHz 2.63 25% 5% 14% 0% 4% 0% 51.2 °C 0/5 9267 17:08:49 1512 MHz 2.63 100% 1% 97% 0% 0% 0% 55.9 °C 0/5 9268 17:08:50 1512 MHz 2.98 74% 1% 72% 0% 0% 0% 56.4 °C 0/5 9269 17:08:50 1512 MHz 2.98 7% 5% 1% 0% 0% 0% 56.4 °C 0/5 9270 17:08:51 1512 MHz 2.98 5% 2% 0% 1% 0% 0% 50.3 °C 0/5 9271 9272 ### resolv.conf 9273 9274 -rw-r--r-- 1 root root 30 Sep 25 17:02 /etc/resolv.conf 9275 # Generated by NetworkManager 9276 9277 ### Current sysinfo: 9278 9279 Linux 4.9.318-legacy-sun50iw9 (opi) 09/25/2023 _aarch64_ (4 CPU) 9280 9281 avg-cpu: %user %nice %system %iowait %steal %idle 9282 14.58 0.01 5.88 4.60 0.00 74.94 9283 9284 Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read kB_wrtn kB_dscd 9285 ram0 0.00 0.00 0.00 0.00 0 0 0 9286 ram1 0.00 0.00 0.00 0.00 0 0 0 9287 ram2 0.00 0.00 0.00 0.00 0 0 0 9288 ram3 0.00 0.00 0.00 0.00 0 0 0 9289 ram4 0.00 0.00 0.00 0.00 0 0 0 9290 ram5 0.00 0.00 0.00 0.00 0 0 0 9291 ram6 0.00 0.00 0.00 0.00 0 0 0 9292 ram7 0.00 0.00 0.00 0.00 0 0 0 9293 ram8 0.00 0.00 0.00 0.00 0 0 0 9294 ram9 0.00 0.00 0.00 0.00 0 0 0 9295 ram10 0.00 0.00 0.00 0.00 0 0 0 9296 ram11 0.00 0.00 0.00 0.00 0 0 0 9297 ram12 0.00 0.00 0.00 0.00 0 0 0 9298 ram13 0.00 0.00 0.00 0.00 0 0 0 9299 ram14 0.00 0.00 0.00 0.00 0 0 0 9300 ram15 0.00 0.00 0.00 0.00 0 0 0 9301 mmcblk0 37.13 1581.19 2.58 0.00 9385503 15340 0 9302 mmcblk0p1 37.12 1580.84 2.58 0.00 9383399 15340 0 9303 zram0 47.34 35.42 153.93 0.00 210216 913700 0 9304 zram1 0.73 0.50 2.40 0.00 2976 14260 0 9305 zram2 0.00 0.00 0.00 0.00 0 0 0 9306 9307 --procs-- -----------------------memory---------------------- ---swap-- -----io---- -system-- ----------cpu---------- 9308 r b swpd free buff cache si so bi bo in cs us sy id wa st gu 9309 3 0 484508 14440 14888 297328 9 39 402 1 312 458 15 6 75 5 0 0 9310 9311 total used free shared buff/cache available 9312 Mem: 965Mi 702Mi 14Mi 40Mi 304Mi 263Mi 9313 Swap: 482Mi 473Mi 9.8Mi 9314 9315 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 9316 /dev/zram1 lz4 50M 11.9M 3.2M 3.7M 4 /var/log 9317 /dev/zram0 lzo 482.9M 471.2M 134.8M 139.7M 4 [SWAP] 9318 9319 17:08:51 up 1:38, 2 users, load average: 2.98, 2.40, 2.27 9320 9321 [ 5528.824915] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9322 [ 5528.824920] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710110 9323 [ 5528.824949] sunxi-mmc sdc1: *****retry:re-send cmd***** 9324 [ 5528.935756] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9325 [ 5528.935852] sunxi-mmc sdc1: *****retry:start***** 9326 [ 5528.935890] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9327 [ 5528.935895] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9328 [ 5528.935922] sunxi-mmc sdc1: *****retry:re-send cmd***** 9329 [ 5529.046729] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9330 [ 5529.046811] sunxi-mmc sdc1: *****retry:start***** 9331 [ 5529.046847] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9332 [ 5529.046852] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9333 [ 5529.046877] sunxi-mmc sdc1: *****retry:re-send cmd***** 9334 [ 5529.157645] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9335 [ 5529.157681] sunxi-mmc sdc1: *****retry:start***** 9336 [ 5529.157716] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9337 [ 5529.157721] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9338 [ 5529.157745] sunxi-mmc sdc1: *****retry:re-send cmd***** 9339 [ 5529.268510] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9340 [ 5529.268603] sunxi-mmc sdc1: *****retry:start***** 9341 [ 5529.268638] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9342 [ 5529.268643] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9343 [ 5529.268669] sunxi-mmc sdc1: *****retry:re-send cmd***** 9344 [ 5529.379488] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9345 [ 5529.379579] sunxi-mmc sdc1: *****retry:start***** 9346 [ 5529.379614] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9347 [ 5529.379619] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9348 [ 5529.379643] sunxi-mmc sdc1: *****retry:re-send cmd***** 9349 [ 5529.490458] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9350 [ 5529.490493] sunxi-mmc sdc1: *****retry:start***** 9351 [ 5529.490528] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9352 [ 5529.490534] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9353 [ 5529.490566] sunxi-mmc sdc1: *****retry:re-send cmd***** 9354 [ 5529.601328] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9355 [ 5529.601364] sunxi-mmc sdc1: *****retry:start***** 9356 [ 5529.601396] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9357 [ 5529.601406] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710110 9358 [ 5529.601432] sunxi-mmc sdc1: *****retry:re-send cmd***** 9359 [ 5529.712241] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9360 [ 5529.712332] sunxi-mmc sdc1: *****retry:start***** 9361 [ 5529.712368] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9362 [ 5529.712373] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710110 9363 [ 5529.712398] sunxi-mmc sdc1: *****retry:re-send cmd***** 9364 [ 5529.823213] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9365 [ 5529.823250] sunxi-mmc sdc1: *****retry:start***** 9366 [ 5529.823285] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9367 [ 5529.823290] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710110 9368 [ 5529.823314] sunxi-mmc sdc1: *****retry:re-send cmd***** 9369 [ 5529.934127] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9370 [ 5529.934218] sunxi-mmc sdc1: *****retry:start***** 9371 [ 5529.934254] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9372 [ 5529.934259] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9373 [ 5529.934286] sunxi-mmc sdc1: *****retry:re-send cmd***** 9374 [ 5530.045094] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9375 [ 5530.045184] sunxi-mmc sdc1: *****retry:start***** 9376 [ 5530.045219] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9377 [ 5530.045224] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9378 [ 5530.045251] sunxi-mmc sdc1: *****retry:re-send cmd***** 9379 [ 5530.156092] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9380 [ 5530.156224] sunxi-mmc sdc1: *****retry:start***** 9381 [ 5530.156288] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9382 [ 5530.156301] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9383 [ 5530.156339] sunxi-mmc sdc1: *****retry:re-send cmd***** 9384 [ 5530.267115] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9385 [ 5530.267170] sunxi-mmc sdc1: *****retry:start***** 9386 [ 5530.267227] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9387 [ 5530.267239] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9388 [ 5530.267277] sunxi-mmc sdc1: *****retry:re-send cmd***** 9389 [ 5530.378085] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9390 [ 5530.378170] sunxi-mmc sdc1: *****retry:start***** 9391 [ 5530.378204] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9392 [ 5530.378209] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9393 [ 5530.378235] sunxi-mmc sdc1: *****retry:re-send cmd***** 9394 [ 5530.488998] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9395 [ 5530.489081] sunxi-mmc sdc1: *****retry:start***** 9396 [ 5530.489116] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9397 [ 5530.489121] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9398 [ 5530.489146] sunxi-mmc sdc1: *****retry:re-send cmd***** 9399 [ 5530.599954] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9400 [ 5530.599992] sunxi-mmc sdc1: *****retry:start***** 9401 [ 5530.600031] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9402 [ 5530.600038] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9403 [ 5530.600069] sunxi-mmc sdc1: *****retry:re-send cmd***** 9404 [ 5530.710876] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9405 [ 5530.710960] sunxi-mmc sdc1: *****retry:start***** 9406 [ 5530.710995] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9407 [ 5530.711000] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9408 [ 5530.711026] sunxi-mmc sdc1: *****retry:re-send cmd***** 9409 [ 5530.821834] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9410 [ 5530.821916] sunxi-mmc sdc1: *****retry:start***** 9411 [ 5530.821950] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9412 [ 5530.821955] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9413 [ 5530.821979] sunxi-mmc sdc1: *****retry:re-send cmd***** 9414 [ 5530.932792] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9415 [ 5530.932884] sunxi-mmc sdc1: *****retry:start***** 9416 [ 5530.932919] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9417 [ 5530.932924] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9418 [ 5530.932952] sunxi-mmc sdc1: *****retry:re-send cmd***** 9419 [ 5531.043761] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9420 [ 5531.043853] sunxi-mmc sdc1: *****retry:start***** 9421 [ 5531.043887] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9422 [ 5531.043892] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9423 [ 5531.043918] sunxi-mmc sdc1: *****retry:re-send cmd***** 9424 [ 5531.154729] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9425 [ 5531.154820] sunxi-mmc sdc1: *****retry:start***** 9426 [ 5531.154854] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9427 [ 5531.154859] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9428 [ 5531.154883] sunxi-mmc sdc1: *****retry:re-send cmd***** 9429 [ 5531.265646] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9430 [ 5531.265695] sunxi-mmc sdc1: *****retry:start***** 9431 [ 5531.265729] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9432 [ 5531.265734] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9433 [ 5531.265755] sunxi-mmc sdc1: *****retry:re-send cmd***** 9434 [ 5531.376573] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9435 [ 5531.376667] sunxi-mmc sdc1: *****retry:start***** 9436 [ 5531.376703] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9437 [ 5531.376708] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9438 [ 5531.376734] sunxi-mmc sdc1: *****retry:re-send cmd***** 9439 [ 5531.487542] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9440 [ 5531.487631] sunxi-mmc sdc1: *****retry:start***** 9441 [ 5531.487666] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9442 [ 5531.487671] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9443 [ 5531.487697] sunxi-mmc sdc1: *****retry:re-send cmd***** 9444 [ 5531.598507] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9445 [ 5531.598547] sunxi-mmc sdc1: *****retry:start***** 9446 [ 5531.598582] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9447 [ 5531.598593] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9448 [ 5531.598601] sunxi-mmc sdc1: sunxi v4p1x retry give up 9449 [ 5531.598607] sunxi-mmc sdc1: retry:set phase failed or over retry times 9450 [ 5531.598624] sunxi-mmc sdc1: retry:give up 9451 [ 5531.598667] sdiohal err:dt read fail ret:-110, system_addr=0x4024f000 9452 [ 5531.598672] sdiohal:sdio dump_aon_reg entry 9453 [ 5531.598707] sdiohal:pmu sdio status:[0x140]:0x6b 9454 [ 5531.598735] sdiohal:pmu sdio status:[0x141]:0x3c 9455 [ 5531.598755] sdiohal:pmu sdio status:[0x142]:0xe1 9456 [ 5531.598775] sdiohal:pmu sdio status:[0x143]:0x0 9457 [ 5531.598794] sdiohal:pmu sdio status:[0x144]:0x0 9458 [ 5531.598812] sdiohal:pmu sdio status:[0x145]:0x0 9459 [ 5531.598831] sdiohal:pmu sdio status:[0x146]:0x0 9460 [ 5531.598849] sdiohal:pmu sdio status:[0x147]:0x0 9461 [ 5531.598868] sdiohal:pmu sdio status:[0x148]:0x60 9462 [ 5531.598887] sdiohal:pmu sdio status:[0x149]:0x0 9463 [ 5531.598906] sdiohal:pmu sdio status:[0x14a]:0x0 9464 [ 5531.598925] sdiohal:pmu sdio status:[0x14b]:0x0 9465 [ 5531.598945] sdiohal:pmu sdio status:[0x14c]:0x0 9466 [ 5531.598963] sdiohal:pmu sdio status:[0x14d]:0x0 9467 [ 5531.598982] sdiohal:pmu sdio status:[0x14e]:0x0 9468 [ 5531.599000] sdiohal:pmu sdio status:[0x14f]:0x0 9469 [ 5531.599077] sdiohal:cm4d haddr 0:[0x144]:0x0 9470 [ 5531.599096] sdiohal:cm4d haddr 0:[0x145]:0x20 9471 [ 5531.599115] sdiohal:cm4d haddr 0:[0x146]:0x12 9472 [ 5531.599134] sdiohal:cm4d haddr 0:[0x147]:0x0 9473 [ 5531.599209] sdiohal:cm4i haddr 1:[0x144]:0xe0 9474 [ 5531.599228] sdiohal:cm4i haddr 1:[0x145]:0x40 9475 [ 5531.599247] sdiohal:cm4i haddr 1:[0x146]:0x10 9476 [ 5531.599266] sdiohal:cm4i haddr 1:[0x147]:0x0 9477 [ 5531.599341] sdiohal:cm4s haddr 2:[0x144]:0x7c 9478 [ 5531.599360] sdiohal:cm4s haddr 2:[0x145]:0x6 9479 [ 5531.599379] sdiohal:cm4s haddr 2:[0x146]:0x14 9480 [ 5531.599398] sdiohal:cm4s haddr 2:[0x147]:0x40 9481 [ 5531.599474] sdiohal:dmaw haddr 3:[0x144]:0x0 9482 [ 5531.599493] sdiohal:dmaw haddr 3:[0x145]:0x0 9483 [ 5531.599512] sdiohal:dmaw haddr 3:[0x146]:0x0 9484 [ 5531.599531] sdiohal:dmaw haddr 3:[0x147]:0x0 9485 [ 5531.599645] sdiohal:dmar haddr 4:[0x144]:0x0 9486 [ 5531.599665] sdiohal:dmar haddr 4:[0x145]:0x0 9487 [ 5531.599684] sdiohal:dmar haddr 4:[0x146]:0x0 9488 [ 5531.599703] sdiohal:dmar haddr 4:[0x147]:0x0 9489 [ 5531.599828] sdiohal:aon_to_ahb haddr 5:[0x144]:0x0 9490 [ 5531.599859] sdiohal:aon_to_ahb haddr 5:[0x145]:0x0 9491 [ 5531.599881] sdiohal:aon_to_ahb haddr 5:[0x146]:0x0 9492 [ 5531.599900] sdiohal:aon_to_ahb haddr 5:[0x147]:0x0 9493 [ 5531.599977] sdiohal:axi_to_ahb haddr 6:[0x144]:0x4 9494 [ 5531.599996] sdiohal:axi_to_ahb haddr 6:[0x145]:0xf0 9495 [ 5531.600015] sdiohal:axi_to_ahb haddr 6:[0x146]:0x24 9496 [ 5531.600035] sdiohal:axi_to_ahb haddr 6:[0x147]:0x40 9497 [ 5531.600111] sdiohal:hready_status haddr 7:[0x144]:0xcf 9498 [ 5531.600130] sdiohal:hready_status haddr 7:[0x145]:0xff 9499 [ 5531.600149] sdiohal:hready_status haddr 7:[0x146]:0xf9 9500 [ 5531.600168] sdiohal:hready_status haddr 7:[0x147]:0x70 9501 [ 5531.600171] sdiohal:val:0xc 9502 [ 5531.600220] sdiohal:after reset hready status:[0x144]:0xcf 9503 [ 5531.600238] sdiohal:after reset hready status:[0x145]:0xff 9504 [ 5531.600256] sdiohal:after reset hready status:[0x146]:0xf9 9505 [ 5531.600275] sdiohal:after reset hready status:[0x147]:0x70 9506 [ 5531.600278] sdiohal:sdio dump_aon_reg end 9507 9508 [ 5531.600281] sdiohal:sdiohal_abort 9509 [ 5531.600286] sdiohal:carddump flag set[1] 9510 [ 5531.600315] sdiohal:disable rx int for dump 9511 [ 5531.600321] sdiohal:chn8 tx push old, cmdid=25, mstime=5527952, record_time=5527952 9512 [ 5531.600330] chn8 tx push old: 00 00 00 00 10 19 a5 00 90 59 54 00 00 00 00 00 .........YT..... 9513 [ 5531.600335] sdiohal:chn8 tx denq old, cmdid=25, mstime=5527952, record_time=5527955 9514 [ 5531.600339] chn8 tx denq old: 80 52 00 08 10 19 a5 00 90 59 54 00 00 00 00 00 .R.......YT..... 9515 [ 5531.600344] sdiohal:chn22 rx dispatch old, cmdid=27, mstime=5527848, record_time=5527853 9516 [ 5531.600348] chn22 rx dispatch old: 3f 06 00 0a 00 1b 0c 00 28 59 54 00 00 38 00 00 ?.......(YT..8.. 9517 [ 5531.600353] sdiohal:chn8 tx push new, cmdid=11, mstime=5527958, record_time=5527958 9518 [ 5531.600357] chn8 tx push new: 00 00 00 00 10 0b 57 00 96 59 54 00 00 00 00 00 ......W..YT..... 9519 [ 5531.600361] sdiohal:chn8 tx denq new, cmdid=11, mstime=5527958, record_time=5527958 9520 [ 5531.600366] chn8 tx denq new: 80 2b 00 08 10 0b 57 00 96 59 54 00 00 00 00 00 .+....W..YT..... 9521 [ 5531.600370] sdiohal:chn22 rx dispatch new, cmdid=25, mstime=5527952, record_time=5527958 9522 [ 5531.600375] chn22 rx dispatch new: 3f 06 00 0a 00 19 0c 00 90 59 54 00 00 39 00 00 ?........YT..9.. 9523 [ 5531.600381] WCN_ERR: mdbg_dump_data dump memory error:-110 9524 [ 5531.600394] WCN: mdbg dump bt modem 0 ok! 9525 [ 5531.600399] WCN_ERR: read HCI_ARM_WR_RD_MODE reg error:-1 9526 [ 5531.600413] WCN_ERR: mdbg_dump_data dump memory error:-1 9527 [ 5531.600418] WCN: mdbg dump bt_cmd buf 0 ok! 9528 [ 5531.600422] WCN_ERR: mdbg_dump_data dump memory error:-1 9529 [ 5531.600427] WCN: mdbg dump btevent buf 0 ok! 9530 [ 5531.600431] WCN_ERR: mdbg_dump_data dump memory error:-1 9531 [ 5531.600435] WCN: mdbg dump bt_lmp_tx_buf 0 ok! 9532 [ 5531.600440] WCN_ERR: mdbg_dump_data dump memory error:-1 9533 [ 5531.600444] WCN: mdbg dump bt_lmp_rx_buf 0 ok! 9534 [ 5531.600449] WCN_ERR: mdbg_dump_data dump memory error:-1 9535 [ 5531.600453] WCN: mdbg dump bt_acl_tx_buf0 ok! 9536 [ 5531.600457] WCN_ERR: mdbg_dump_data dump memory error:-1 9537 [ 5531.600462] WCN: mdbg dump bt_acl_rx_buf 0 ok! 9538 [ 5531.600466] WCN_ERR: mdbg_dump_data dump memory error:-1 9539 [ 5531.600470] WCN: mdbg dump bt_sco_tx_buf 0 ok! 9540 [ 5531.600475] WCN_ERR: mdbg_dump_data dump memory error:-1 9541 [ 5531.600479] WCN: mdbg dump bt_sco_rx_buf 0 ok! 9542 [ 5531.600483] WCN_ERR: mdbg_dump_data dump memory error:-1 9543 [ 5531.600488] WCN: mdbg dump bt_bb_tx_buf 0 ok! 9544 [ 5531.600492] WCN_ERR: mdbg_dump_data dump memory error:-1 9545 [ 5531.600496] WCN: mdbg dump bt_bb_rx_buf 0 ok! 9546 [ 5531.646525] WCN: dumpmem_rx_callback 9547 [ 5531.646535] WCN: dump str finish! 9548 [ 5531.646538] WCN: mdbg dump memory finish 9549 [ 5531.646564] sdiohal err:sdiohal_adma_pt_read line 510 dump happened 9550 [ 5531.646568] sdiohal err:adma read fail ret:-19 9551 [ 5531.876603] WCN: stop_loopcheck 9552 [ 5537.210058] WCN: mdbg_assert_interface:[CMD] WIFI_CMD_SCAN, [REASON] CMD_RSP_TIMEOUT_ERROR 9553 [ 5537.210077] sdiohal:carddump flag set[1] 9554 [ 5537.210150] sdiohal:disable rx int for dump 9555 [ 5537.210162] sdiohal:chn8 tx push old, cmdid=25, mstime=5527952, record_time=5527952 9556 [ 5537.210174] chn8 tx push old: 00 00 00 00 10 19 a5 00 90 59 54 00 00 00 00 00 .........YT..... 9557 [ 5537.210180] sdiohal:chn8 tx denq old, cmdid=25, mstime=5527952, record_time=5527955 9558 [ 5537.210184] chn8 tx denq old: 80 52 00 08 10 19 a5 00 90 59 54 00 00 00 00 00 .R.......YT..... 9559 [ 5537.210189] sdiohal:chn22 rx dispatch old, cmdid=27, mstime=5527848, record_time=5527853 9560 [ 5537.210194] chn22 rx dispatch old: 3f 06 00 0a 00 1b 0c 00 28 59 54 00 00 38 00 00 ?.......(YT..8.. 9561 [ 5537.210198] sdiohal:chn8 tx push new, cmdid=11, mstime=5527958, record_time=5527958 9562 [ 5537.210203] chn8 tx push new: 00 00 00 00 10 0b 57 00 96 59 54 00 00 00 00 00 ......W..YT..... 9563 [ 5537.210208] sdiohal:chn8 tx denq new, cmdid=11, mstime=5527958, record_time=5527958 9564 [ 5537.210213] chn8 tx denq new: 80 2b 00 08 10 0b 57 00 96 59 54 00 00 00 00 00 .+....W..YT..... 9565 [ 5537.210218] sdiohal:chn22 rx dispatch new, cmdid=25, mstime=5527952, record_time=5527958 9566 [ 5537.210223] chn22 rx dispatch new: 3f 06 00 0a 00 19 0c 00 90 59 54 00 00 39 00 00 ?........YT..9.. 9567 [ 5537.210227] WCN_ERR: Not dump again! 9568 [ 5543.137795] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 9569 [ 5549.247975] systemd-journald[1921]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.0 (1654 of 2204 items, 1269760 file size, 767 bytes per hash table item), suggesting rotation. 9570 [ 5549.248004] systemd-journald[1921]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 9571 9572 9573 9574 ### interrupts: 9575 CPU0 CPU1 CPU2 CPU3 9576 3: 199127 209462 208307 179917 wakeupgen 48 Level sun4i_timer0 9577 6: 848063 721119 701849 726177 GIC-0 27 Level arch_timer 9578 8: 0 0 0 0 wakeupgen 61 Level 30f0000.iommu 9579 151: 0 0 0 0 sunxi_pio_edge 134 Edge sdc0 cd 9580 193: 0 0 0 0 sunxi_pio_edge 176 Edge bt_wake_isr 9581 273: 483 0 0 0 wakeupgen 42 Level 3002000.dma-controller 9582 275: 0 0 0 0 wakeupgen 106 Level RemoteIR_RX 9583 276: 0 0 0 0 wakeupgen 104 Level rtc 9584 278: 0 0 0 0 wakeupgen 93 Level cedar_dev 9585 280: 298 0 0 0 wakeupgen 0 Level uart0 9586 283: 0 0 0 0 wakeupgen 9 Level twi3 9587 284: 138080 0 0 0 wakeupgen 105 Level twi5 9588 285: 0 0 0 0 wakeupgen 25 Level sunxi_usb_udc 9589 288: 2 0 0 0 wakeupgen 28 Level ehci_hcd:usb1 9590 289: 94396 0 0 0 wakeupgen 29 Level ohci_hcd:usb4 9591 290: 0 0 0 0 wakeupgen 30 Level ehci_hcd:usb2 9592 291: 0 0 0 0 wakeupgen 31 Level ohci_hcd:usb5 9593 292: 0 0 0 0 wakeupgen 32 Level ehci_hcd:usb3 9594 293: 0 0 0 0 wakeupgen 33 Level ohci_hcd:usb6 9595 294: 0 0 0 0 wakeupgen 12 Level spi0 9596 295: 504 0 0 0 wakeupgen 13 Level spi1 9597 298: 3567 0 0 239620 wakeupgen 35 Level sunxi-mmc0 9598 299: 104922 0 0 0 wakeupgen 36 Level sunxi-mmc1 9599 300: 9 0 0 0 wakeupgen 88 Level dispaly 9600 303: 355994 0 0 0 wakeupgen 66 Level dispaly 9601 314: 0 0 0 0 wakeupgen 91 Edge ss 9602 316: 0 0 0 0 wakeupgen 89 Level 1420000.deinterlace 9603 319: 0 0 0 0 wakeupgen 20 Edge sunxikbd 9604 320: 0 0 0 0 wakeupgen 14 Level gmac0 9605 IPI0: 624833 665809 618948 567108 Rescheduling interrupts 9606 IPI1: 1658 2105 2104 2033 Function call interrupts 9607 IPI2: 0 0 0 0 CPU stop interrupts 9608 IPI3: 5958 12785 18303 20397 Timer broadcast interrupts 9609 IPI4: 2433 2158 1928 2034 IRQ work interrupts 9610 IPI5: 0 0 0 0 CPU wake-up interrupts 9611 Err: 0 Please upload the whole output above to an online pasteboard service and provide the URL in the forum where you have been asked for this.

I'm using image Armbian_23.8.3_Orangepizero2_bookworm_current_6.1.53 I'm building a DTS overlay for a SPI Touchscreen and every pin I try to use is showing this error: [ 1.441808] sun50i-h616-pinctrl 300b000.pinctrl: pin PC11 already requested by 5011000.spi; cannot claim for 300b000.pinctrl:75 [ 1.441817] sun50i-h616-pinctrl 300b000.pinctrl: pin-75 (300b000.pinctrl:75) status -22 [ 1.441829] sun6i-spi 5011000.spi: cannot register SPI master I'm trying to configure my touchscreen dts to use the SPI1.0 & SPI1.1. However, the pins exposed on the headers are all allocated for device use under 300b000.pinctrl. How do you allocate header pins for another use? I need 5 pins + SPI1 for the touchscreen to work. My dts /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { spi1_cs1: spi1_cs1 { pins = "PC11"; function = "gpio_out"; output-high; }; opiz_display_pins: opiz_display_pins { pins = "PC9", "PC6", "PC5"; function = "gpio_out"; }; ads7846_pins: ads7846_pins { pins = "PH6"; function = "irq"; }; }; }; fragment@1 { target = <&spi1>; __overlay__ { #address-cells = <1>; #size-cells = <0>; status = "okay"; pinctrl-1 = <&spi1_cs1>; pinctrl-names = "default", "default"; cs-gpios= <0>, <&pio 2 11 0>; /* PH9 PC11 */ opizdisplay: opiz-display@0 { reg = <0>; /* Chip Select 0 */ compatible = "ilitek,ili9341"; spi-max-frequency = <16000000>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&opiz_display_pins>; rotate = <90>; bgr = <0>; fps = <10>; buswidth = <8>; dc-gpios = <&pio 2 6 0>; /* PC6 */ reset-gpios = <&pio 2 9 1 >; /* PC9 */ led-gpios=<&pio 2 5 0>; /* PC5 */ debug=<0>; }; ads7846: ads7846@1 { reg = <1>; /* Chip Select 1 */ compatible = "ti,ads7846"; spi-max-frequency = <500000>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ads7846_pins>; interrupt-parent = <&pio>; interrupts = <7 6 2>; /* PH6 IRQ_TYPE_EDGE_FALLING */ pendown-gpio = <&pio 7 6 0>; /* PH6 */ /* driver defaults, optional */ ti,x-min = /bits/ 16 <0>; ti,y-min = /bits/ 16 <0>; ti,x-max = /bits/ 16 <0x0FFF>; ti,y-max = /bits/ 16 <0x0FFF>; ti,pressure-min = /bits/ 16 <0>; ti,pressure-max = /bits/ 16 <0xFFFF>; ti,x-plate-ohms = /bits/ 16 <400>; }; }; }; };

I got my 320x240 ILI9341 touchscreen to work with the image from the OrangePI site: Armbian_23.5.2_Orangepizero2_bookworm_legacy_4.9.318_minimal The display is one I bought from Amazon Hosyond 2.8 Inches TFT LCD Touch Screen Shield Display Module 320x240 SPI Serial ILI9341 with Touch Pen Compatible with Arduino R3/Mega2560 Development Board This document was very helpful getting the display set up on the OPZero 2: https://tienda.tettsa.gt/wp-content/uploads/2022/08/OrangePi_Zero2_H616_User-manual_v3.7.pdf I still don't have the touch part working. If anyone has success getting 2 selects working with SPI1 on OPZero2 and touch working, let me know. The basic steps to getting the SPI LCD to work are: 1) wire up the display to the OPZero2 2.8 Inch TFT SPI 240x320 => OPZero2 1 - VCC => (1) 3.3v 2 - GND => (6) Gnd 3 - CS => (24) Spi1 CS 4 - RESET => (7) GPIO 6 5 - DC => (11) GPIO 1 6 - SDI (MOSI) => (19) Spi1 MOSI 7 - SCLK => (23) Spi1 CLK 8 - LED => (13) GPIO 0 9 - SDO (MISO) => (21) Spi1 MISO 10 - T_CLK 11 - T_CS 12 - T_DIN 13 - T_DO 14 - T_IRQ 2) Install Armbian_23.5.2_Orangepizero2_bookworm_legacy_4.9.318_minimal - must be legacy kernel to work 4.9 is OK 3) sudo apt install fbi kbd armbian-config 4) sudo armbian-config set up desktop now to make the LCD work and start on boot 5) sudo nano /boot/armbianEnv.txt overlays=spi-spidev param_spidev_spi_bus=1 param_spidev_spi_cs=1 extraargs=fbcon=map:1 6) sudo nano /etc/modules-load.d/fbtft.conf fbtft fbtft_device 7) sudo nano etc/modprobe.d/fbtft.conf options fbtft_device custom name=fb_ili9341 gpios=dc:70,reset:73,led:69 speed=16000000 busnum=1 cs=1 bgr=1 txtbuflen-32768 fps=10 rotate=90 😎 sudo dpkg-reconfigure console-setup select UTF-8 select Guess optimal character set select terminus select 6/12 9) sudo nano /usr/share/X11/xorg.conf.d/99-fbdev.conf Section "Device" Identifier "myfb" Driver "fbdev" Option "fbdev" "/dev/fb1" EndSection Now when it boots it should boot to the SPI LCD Display

I'm running Octoprint on Orange Pi Zero 2 and Armbian 22.11.3 Bullseye with Linux 4.9.318-sun50iw9 (other than assorted added userspace software, it's stock Armbian, no recompiled kernel or anything like that). It works great - while it works. I successfully complete 30+-hour prints. I can connect, monitor, everything is fine and dandy. When I'm connected to Octoprint from PC, monitoring of the 3D printer enabled, even without printing anything, it works ok. But if I'm not connected, and the printer is doing nothing for a prolonged time (an hour or so?), it stops working. Probably goes to sleep - stops responding to any network communication. Since it's a fully headless setup - no keyboard/mouse - I can't really tell for sure, it's completely unresponsive for all intents and purposes. No ping, no ssh, no www. I need to power-cycle it to be able to connect again. Any suggestions how to solve that?

Hi, I would like to use st7735 in an orangePI zero 2 (H616). The st7735 module was purchased at the following link: https://it.aliexpress.com/item/33031122936.html?spm=a2g0o.order_list.order_list_main.32.c5eb36966Y6eGs&gatewayAdapt=glo2ita Armbian usage. I connected st7735 in the following way: OPI --------> st7735 23 --------> SCK 19 --------> SDA 24 --------> CS 13 --------> AD 11 --------> RTD 4 --------> VCC 25 --------> GND I then ran the following command: sudo modprobe fbtft_device custom name=fb_st7735r gpios=dc:3,reset:0 speed=16000000 rotate=90 The screen stays white with a red stripe at the bottom. I can't find any errors in dmesg. /dev/fb1 is created how can i use the command con2fbmap 1 1 which I found by following this guide: https://www.instructables.com/Orange-Pi-Zero-Connect-TFT-SPI-ST7735/ Thank you

On a clean Armbian image (Armbian_23.5.2_Orangepizero2_jammy_legacy_4.9.318.img) I am not able to connect to an AP. nmcli or nmtui produces errors (https://paste.armbian.com/ogowinebol). This also holds for the other jammy_legacy images in the archive. When testing on the stock images provided orange pi I am able to connect with both the Orangepizero2_3.0.6_ubuntu_jammy_server_linux5.16.17.img and Orangepizero2_2.2.0_ubuntu_focal_server_linux4.9.170 images it works. Connecting also works on the Amrbian focal_legacy images I tried.

Hello. I see some progress in H616 (OPIZ2) support in mainline linux (now 6.2RC5 comes with USB) - https://linux-sunxi.org/Linux_mainlining_effort . I tried to setup/enable some other components and I am successful with upstream linux kernel 6.2RC5: - displayengine (drm, fb, mixer, tcon, hdmi) (seems to have some I2C/EDID problems) - videoengine (cedrus) (in testing now) - gpu (3d mali, panfrost) - dma, efuse, thermal ... but I am unsuccessful with - crypto (total different behavior in contrast to H616 manual) and untested - audio codecs and hdmi audio - opp power management (frequency + voltage) for CPU and GPU - SDIO wifi I was also successful with uBoot (some patches from upstream uBoot) to boot sdcard-less from SPI flash and then from network PXE+NFS. Does anyone do some work in this direction ?