lepomis Posted April 10, 2019 Share Posted April 10, 2019 Hello, i'm using wvdial in order to connect my box to the internet which brings up the ppp0 interface, but when i try to ping an external host i get packet filtered. i was wondering which kind of rule should i set. Also i noticed that issuing sudo service networking restart wasn't enought after i edited /etc/network/interfaces in order to connect to the internet, instead a full reboot was needed. which comand should i use in this case? Link to comment Share on other sites More sharing options...
martinayotte Posted April 10, 2019 Share Posted April 10, 2019 2 hours ago, lepomis said: sudo service networking restart wasn't enought after i edited /etc/network/interfaces That is because "networking" and "NetworkManager" are not good friends, the last one keep ownership of eth0 ... Link to comment Share on other sites More sharing options...
lepomis Posted April 11, 2019 Author Share Posted April 11, 2019 probably i'll disable networkmanager... also i don't understand what's the default "ifupdown(eth0) connection which you can't even delete listed in nm. That should be related to /etc/network/interfaces infact if i go under connection information it displays the connection ifupdown(eth0) with the ip addresses i typed in the file interfaces. What's really important is managing to use my 3g dongle with wvdial or something else... Link to comment Share on other sites More sharing options...
lepomis Posted April 11, 2019 Author Share Posted April 11, 2019 20 hours ago, lepomis said: Hello, i'm using wvdial in order to connect my box to the internet which brings up the ppp0 interface, but when i try to ping an external host i get packet filtered. i was wondering which kind of rule i should set. Also i noticed that issuing sudo service networking restart wasn't enought after i edited /etc/network/interfaces in order to connect to the internet, instead a full reboot was needed. which comand should i use in this case? Link to comment Share on other sites More sharing options...
Jeremy Normand Posted January 7, 2020 Share Posted January 7, 2020 English please bonjour avez vous le login et mot de passe pour Armbian_5.78_Aml-s912_Ubuntu_bionic_default_5.1.0-rc1_20190409 merci Hi to all. What is the login name and password for this image please? Link to comment Share on other sites More sharing options...
NicoD Posted January 7, 2020 Share Posted January 7, 2020 Loin : root Pass : 1234 Please use a translator next time. This is an English speaking forum. Veuillez utiliser un traducteur la prochaine fois. Ce n'est pas un forum francophone. Salutations. Link to comment Share on other sites More sharing options...
Recommended Posts