gurabli Posted July 16, 2019 Share Posted July 16, 2019 Hi, I'm running Armbian Ubuntu Server on my Neo2 and works quite good. I just can't install Wireguard. I have installed kernel headers from armbian config, bit still fails. I use the ppa repo. Kernel stable latest, 4.19.57 Any ideas how to proceed and install? Link to comment Share on other sites More sharing options...
Igor Posted July 16, 2019 Share Posted July 16, 2019 And what you get if you type: modprobe wireguard ... module is already present. Link to comment Share on other sites More sharing options...
gurabli Posted July 16, 2019 Author Share Posted July 16, 2019 1 hour ago, Igor said: And what you get if you type: modprobe wireguard ... module is already present. Nothing, empty. Link to comment Share on other sites More sharing options...
Igor Posted July 16, 2019 Share Posted July 16, 2019 and what is dmesg saying ? Link to comment Share on other sites More sharing options...
gurabli Posted July 16, 2019 Author Share Posted July 16, 2019 2 hours ago, Igor said: and what is dmesg saying ? I'm feom phone now, but strange, last two lines of dmesg say ok. Even if I had error during apt install. [ 76.932990] wireguard: WireGuard 0.0.20190702 loaded. See www.wireguard.com for information. [ 76.932998] wireguard: Copyright (C) 2015-2019 Jason A. D onenfeld <Jason@zx2c4.com>. All Rights Reserved. What do you think, is it actually working? Link to comment Share on other sites More sharing options...
Igor Posted July 16, 2019 Share Posted July 16, 2019 19 minutes ago, gurabli said: What do you think, is it actually working? Module is loaded and Armbian's job is done. Now you need to proceed to Wireguard manual to understand how to configure things. You can skip a part for compiling a kernel module since its a part of the kernel. Link to comment Share on other sites More sharing options...
gurabli Posted July 16, 2019 Author Share Posted July 16, 2019 Excellent! I will do the configuration, sure. So it is not a problem that modprobe doesn't give anything back? Strange, that I had apt isntall error too. But I will check. Thanks. Link to comment Share on other sites More sharing options...
Igor Posted July 16, 2019 Share Posted July 16, 2019 10 minutes ago, gurabli said: So it is not a problem that modprobe doesn't give anything back? That's normal. You will only get an error if module does not exists. You always need to check what's in the kernel log after you load the module. There goes the output. 11 minutes ago, gurabli said: Strange, that I had apt isntall error too. No idea since I am not the author of the software you are installing. Link to comment Share on other sites More sharing options...
gurabli Posted July 17, 2019 Author Share Posted July 17, 2019 I managed to configure Wireguard on my remote NEO2 server and my home server. The NEO2 is configured as the server. It works amazing. Fast and easy, waaay faster then SSH tunneling, not to mentione OpenVPN. Sure, it maybe not as secure as OpenVPN or SSH, sinve no audit yet on Wireguard, but in my use case it is perfect. Great job and thanks for your support. It is awsome what a small piece of board like NEO2 can do with a great and optimized OS like Armbian 1 Link to comment Share on other sites More sharing options...
Recommended Posts