martinayotte Posted July 23, 2019 Share Posted July 23, 2019 I've done a build Meson64-DEV with 5.2.y ... I will commit the switch as soon as runtime test succeded ! 1 Link to comment Share on other sites More sharing options...
guidol Posted July 23, 2019 Share Posted July 23, 2019 Fine - will test it then with my Odroid C2 with S905 (Amlogic S905 = Meson64 - I dont know why I every time mix up Meson64 with a A64 CPU in my mind ) Link to comment Share on other sites More sharing options...
martinayotte Posted July 23, 2019 Author Share Posted July 23, 2019 6 minutes ago, guidol said: Fine - will test it then with my Odroid C2 with S905 Good ! Tell us if everything is fine ... Commit done ! https://github.com/armbian/build/commit/840594fad366cde199735902aa681c00db57ff3e Link to comment Share on other sites More sharing options...
guidol Posted July 24, 2019 Share Posted July 24, 2019 15 hours ago, martinayotte said: Good ! Tell us if everything is fine ... Today I booted the Desktop-version. On the shell/cli-side seems all OK. At the Desktop-side Graphics do work well (can play Youtube ) - but I cant get any sound out of my HDMI monitor aplay -l shows: **** List of PLAYBACK Hardware Devices **** card 0: mesongxaudio [meson-gx-audio], device 0: meson-aiu-i2s.0.auto-i2s-hifi i2s-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 alsamixer doenst show any controls. In desktop-mode the system seems to use PulseAudio, but did only found a Dummy-Device and not the mesongxaudio. Do I miss some setting? Link to comment Share on other sites More sharing options...
martinayotte Posted July 24, 2019 Author Share Posted July 24, 2019 5 hours ago, guidol said: Do I miss some setting? Was it working under 5.1.y ? If Yes, maybe I can look if DT were different between 5.1.y and 5.2.y ... Link to comment Share on other sites More sharing options...
guidol Posted July 24, 2019 Share Posted July 24, 2019 3 hours ago, martinayotte said: Was it working under 5.1.y ? If Yes, maybe I can look if DT were different between 5.1.y and 5.2.y ... I cant tell, because the C2 is the "black sheep" of my SBC-family With this version of armbian the support seems to be much better than the last one I tested (and mostly I tested headless, because support wasnt the best). So I would say there was no sound-support in 5.1 and there is no sound-overlay. USB-Soundcard does work. The decompiled .DTB doesnst show also nothing about HDMI-Audio... My be in the far future there will be a patch used like https://github.com/armbian/build/blob/master/patch/kernel/meson64-default/0035-ARM64-dts-meson-activate-hdmi-audio-HDMI-enabled-boa.patch or https://github.com/armbian/build/blob/master/patch/kernel/meson64-default/0025-snd-meson-activate-HDMI-audio-path.patch For me - I think - a desktop SBC will start at 4GB of Ram and working Video-Acceleration and Sound. The C2 is getting near...but with 2GB of Ram a very good headless SBC now Link to comment Share on other sites More sharing options...
martinayotte Posted July 24, 2019 Author Share Posted July 24, 2019 1 hour ago, guidol said: My be in the far future there will be a patch used like It seems that such few patches are there in DEV also, but I don't have much time right now to figure out, "time is still the missing ingredient" ... Link to comment Share on other sites More sharing options...
Recommended Posts