cynfab Posted May 2, 2016 Share Posted May 2, 2016 I downloaded: http://mirror.igorpecovnik.com/Armbian_5.10_Pcduino3nano_Debian_jessie_4.5.2_desktop.7z and burned it to an SD card, when I tried booting the board, all I get on the uart console is the u-boot SPL signon message +++++++++++++++++++++++++++++++ U-Boot SPL 2016.01-armbian-sun8i (May 01 2016 - 01:05:19) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Could not determine boot source resetting ... +++++++++++++++++++++++++++++++ This repeats forever... I had previously used: http://mirror.igorpecovnik.com/Armbian_5.00_Pcduino3nano_Debian_jessie_4.4.1.zip and it worked fine on the same board. I tried recompiling u-boot from source using the Armbian build tools, with the same result. +++++++++++++++++++++++++++++++ U-Boot SPL 2016.05-rc3-armbian (May 01 2016 - 10:57:44) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Could not determine boot source resetting ... +++++++++++++++++++++++++++++++ The board is a PcDuino3 Nano Lite which is the same as the non-Lite version except it is missing the NAND and IR receiver. any thoughts on what might be wrong?? ...ken... Link to comment Share on other sites More sharing options...
Recommended Posts