Jump to content

Orange pi plus 2 browser hardware acceleration


jonatas

Recommended Posts

Think about installing the OS to eMMC please and then report back. Please see here for potential show-stoppers: http://forum.armbian.com/index.php/topic/1070-install-to-emmc/?p=8433

 

Hello.
I had no time to use the script to install the EMMC memory yet. But I opened the script and in the beginning I came across the following line:
if cat / proc / cpuinfo | grep -q 'sun4i'; Then DEVICE_TYPE = "a10"; else DEVICE_TYPE = "a20"; fi # Determine device
I have a Orange pi plus 2, with h3 processor, this script is for him?
Tomorrow I will try anyway, but if you can save my time with the answer I thank you.
Link to comment
Share on other sites

There are more recipes in one file. The one you looked on is important for NAND installations on A10 and A20. Here we have eMMC, so other section of the script take care of proper installation.

 

Take a look once more and remember that you need to have Armbian 5.10 since you need an updated boot loader too. Bootloader for MMC and eMMC is the same, so if you want to use this script on some older version it wont work.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines