arturito Posted August 15, 2019 Share Posted August 15, 2019 hello everyone, I am new in this forum, I am from Chile nd recently bought a nanopi m4 and installed Armbian 64 bits, here is my problem: my board nanopi m4 OS: latest armbian (64-bits) Installed following all instructions and sequence shown in https://github.com/Pavelectric/WiringPi_M4 all steps of the installation were successful ... but gpio readall (and other gpio functions) returns wiringPiSetup: Unknown model beside that I have no issues with this board (currently outperform my RPI 4B) and all my apps (32 and 64 bits) except wiringpi any clues to solve this issue? greetings Arturo example: cat /proc/cpuinfo ..... processor : 5 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 2 Serial : 9844f9cc95eb99f8 root@nanopim4:/home/arturo/software/WiringPi_M4-master# uname -a Linux nanopim4 4.4.188-rk3399 #13 SMP Thu Aug 8 15:50:19 CEST 2019 aarch64 GNU/Linux root@nanopim4:/home/arturo/software/WiringPi_M4-master# gpio readall wiringPiSetup: Unknown model root@nanopim4:/home/arturo/software/WiringPi_M4-master# Link to comment Share on other sites More sharing options...
arturito Posted August 15, 2019 Author Share Posted August 15, 2019 solved, deinstalled prior packages, did it all again and it worked ! the problem was I did the first installation as sudo su and then dpkg -i wiringpi-v2.44-friendlyelec-rk3399.deb instead of sudo dpkg -i wiringpi-v2.44-friendlyelec-rk3399.deb so It seems this thread is over greetings Arturo Link to comment Share on other sites More sharing options...
Recommended Posts