Jump to content

Orange Pi Zero Plus H5 UART pins don't work


w20359

Recommended Posts

Hi, I've got an Orange Pi Zero Plus H5 running "Armbian_5.91_Orangepizeroplus_Debian_buster_next_4.19.59.img" but I can't seem to connect to it via the three UART pins next to the Ethernet port. I'm using this adapter using both the Windows supplied and the manifacturer's drivers. I've also tried adding "uart1 uart2 uart3" to the overlays line in /boot/armbianEnv.txt and rebooting but with no luck. I'm using PuTTY on my laptop connecting via COM7 serial port (as shown in Device Manager) with baud rate 115200, but the PuTTY screen stays black with nothing coming in. Is there something that I'm missing?

Link to comment
Share on other sites

16 hours ago, w20359 said:

I've also tried adding "uart1 uart2 uart3" to the overlays line in /boot/armbianEnv.txt

No needs for that since Debug UART is on "uart0" which is enabled by default.

16 hours ago, w20359 said:

Is there something that I'm missing?

Maybe you forgot to cross TX/RX wires ...

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines