earth08 Posted November 8, 2019 Share Posted November 8, 2019 Dear, I would like to set my opi+2e to connect to wlan0 if eth0 is not connected, and back to eth0 when eth0 is connected. Please suggest me how to configure /etc/network/interfaces configuration for the same. thanks in adv. Link to comment Share on other sites More sharing options...
Igor Posted November 8, 2019 Share Posted November 8, 2019 5 hours ago, earth08 said: I would like to set my opi+2e to connect to wlan0 if eth0 is not connected, and back to eth0 when eth0 is connected. This works by default. Remove /etc/network/interfaces configuration and use: https://docs.armbian.com/User-Guide_Getting-Started/#how-to-connect-to-wireless Link to comment Share on other sites More sharing options...
earth08 Posted November 15, 2019 Author Share Posted November 15, 2019 i have 3 different wifi connection to connect to so i need wpa_supplicant to work with can you please suggest me ho to config in such case with same static ip ( eth0, and wlan0) thanks and yes i tried above, after doing than still my lan and wifi both get connected. Link to comment Share on other sites More sharing options...
Igor Posted November 16, 2019 Share Posted November 16, 2019 On 11/15/2019 at 4:59 AM, earth08 said: can you please suggest me Start with R&D, perhaps here:https://wiki.debian.org/NetworkConfiguration Link to comment Share on other sites More sharing options...
Recommended Posts