Jump to content

Orange pi one, node-red dht22 sensor


jbserious

Recommended Posts

Hi all,

 

First of all sorry if i posted in the wrong directory

 

I'm currently facing some issues with my orange pi one and in particular with node red and my dht22 temperature and humidity sensor

 

i installed the stable buster version on my sd card this works perfectly and after that i installed node-red on it.

in node red I installed the dht sensor pallet and added it to my flow

 

but here is were the issues are starting, i need to select which pin it is connected to and what gpio i use. i can only select bcm gpio, rev1, rev2 or wiringpi 1 or 2 and then which pin it is connected to.

 

i have the sensor connected to pin 3 on the orange pi one according to the gpio

 

but i read somewhere that the rev2 and rev1 raspberry pi pinout are 180 degrees turned so i also picked pin 38.

 

none of these options seem to work

can someone please help me

 

kind regards

 

jelle

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines