Jump to content

Make your own Nanopi M4V2 image


Recommended Posts

For now there's one downloadable Armbian Buster image for the M4V2 from pask. Also the patch needed to prepare your own image https://drive.google.com/open?id=1LaJIywiZnZUkLDZ9HkWrRtc0PyfiYGOL
 

Yon build or download any other M4 image and apply the patch from pask

Quote

1) download buster(or bionic) desktop image for nanoPi M4 (version 1) from Armbian's web site https://dl.armbian.com/nanopim4/

2) extract and burn it to an SD card

3) apply the patch I have shared at the link above using the following command, changing sdX with the correct device:

sudo dd if=8M_after64ibs_uboot_working_rockpi4image_on_nanopim4v2.dd of=/dev/sdX seek=64


For wifi use this patch from MartinAyotte
Download both files
https://forum.armbian.com/applications/core/interface/file/attachment.php?id=5386
https://forum.armbian.com/applications/core/interface/file/attachment.php?id=5387

 

Copy these to 

 /lib/firmware/brcm/

 

Reboot. That's it. Official Armbian for M4V2 comming soon.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines