krachlatte Posted December 6, 2019 Share Posted December 6, 2019 mainline kernel support, libreelec is allready working. is there any chance on getting amrbian ported here, i allready did some test and made it boot, but network does not get an ip adress link with ethtool show up and 1 gbit. same for the eachlink device Link to comment Share on other sites More sharing options...
hexdump Posted December 7, 2019 Share Posted December 7, 2019 see here: best wishes - hexdump Link to comment Share on other sites More sharing options...
krachlatte Posted December 7, 2019 Author Share Posted December 7, 2019 Hi, and ethernet is working for you with this settings on the eachlink ? because the beelink device has 1000 eg 1 Gbit ethernet. and the eachlink 100mbit only best regards Link to comment Share on other sites More sharing options...
hexdump Posted December 7, 2019 Share Posted December 7, 2019 for the eachlink it works, but of course i can't say for your device - if i remember correctly the gbit ethernet should in theory even be simpler (as not needing extra ac200 handling), but i might be wrong ... a very well maintained allwinner h6 kernel can also be found at https://github.com/megous/linux/tree/orange-pi-4.14 best wishes and good luck - hexdump Link to comment Share on other sites More sharing options...
Recommended Posts