I am trying to figure out how to create a dtoverlay to allow my waveshare 2.8a fbtft screen to work.
I understand that i the 5.x.y kernels, a dtoverlay is required.
I'm starting with the waveshare32b.dts for raspberry pi, found here: https://github.com/swkim01/waveshare-dtoverlays
Should be compatible with the 2.8a per waveshare wiki.
I'm trying to modify it in sort of the same way as was done in this thread, for another display:
I have the waveshare 2.8 A tft and touch panel working on the Orange Pi PC2 with one long dtoverlay.
Some of my inspiration came from here:
Like i said one dtoverlay, both fbtft and the touch panel, no other overlays needed.
I admit i am a neophyte and it might be possible to trim this one slightly and use it in combination with the CS1 dtoverlay but it wasn't clear to me how that would work.
I am using a 6 inch hand-made cable to connect my w