c.man Posted April 5, 2020 Share Posted April 5, 2020 HI, I have a orange pi zero + with a NAS board (orange pi zero nas) with a msata ssd (kingspec 64 Gb): But armbian don't releave msata device, because with fdisk command I have: fdisk -l Disk /dev/ram0: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram1: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram2: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram3: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/mmcblk0: 14.6 GiB, 15653142528 bytes, 30572544 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x41b78b57 Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 8192 30266815 30258624 14.4G 83 Linux Disk /dev/zram0: 50 MiB, 52428800 bytes, 12800 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram1: 119.1 MiB, 124911616 bytes, 30496 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes How I can to do for resolve my problem ? Link to comment Share on other sites More sharing options...
Werner Posted April 5, 2020 Share Posted April 5, 2020 armbianmonitor -u Link to comment Share on other sites More sharing options...
c.man Posted April 5, 2020 Author Share Posted April 5, 2020 1 minute ago, Werner said: armbianmonitor -u thanks werner for ypu reply. logging is there: http://ix.io/2gId Link to comment Share on other sites More sharing options...
c.man Posted April 5, 2020 Author Share Posted April 5, 2020 this is the first time that I try to use ssd msata, so I don't know if device is working (it is new, but I don't have installed until now) Link to comment Share on other sites More sharing options...
c.man Posted April 5, 2020 Author Share Posted April 5, 2020 is it possibile a power supply problem ? External power supply is a 5V/2A DC... Link to comment Share on other sites More sharing options...
Werner Posted April 5, 2020 Share Posted April 5, 2020 I do not know. From the logs it does not look like it detected anything at all.... /OT: You should not expect very high speed from this MSATA anyways since this board just connects it through USB2 which will limit the throughput to the well known 480Mbit/s. Link to comment Share on other sites More sharing options...
Recommended Posts