zoic21 Posted June 13, 2016 Share Posted June 13, 2016 Hi, I just switch from hummingboard i4 to odroid c2 (same os, armbian, same app on it), all it's ok but I got an issue with load average, on i4 I have about 0.4 but on C2 I have 3 and I don't understand why. Here a vmstat from C2 : procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 891036 74724 277404 0 0 0 0 310 493 3 2 95 0 0 1 0 0 891004 74724 277404 0 0 0 0 18272 1863 0 2 98 0 0 0 0 0 891036 74724 277404 0 0 0 0 18205 1950 4 0 96 0 0 1 0 0 891036 74724 277404 0 0 0 0 18412 1728 0 2 98 0 0 0 0 0 891036 74732 277404 0 0 0 0 18090 1851 0 0 100 0 0 1 0 0 891160 74732 277404 0 0 0 0 19303 2400 7 1 92 0 0 0 0 0 891160 74732 277404 0 0 0 0 17993 1654 0 0 100 0 0 2 0 0 891144 74732 277404 0 0 0 0 18178 1733 0 3 97 0 0 1 0 0 891160 74732 277404 0 0 0 0 18027 1765 0 0 100 0 0 2 0 0 891144 74732 277404 0 0 0 0 18147 1681 0 0 100 0 0 I find interrupt is very very high, did anyone also notice that ? Thank in advance. Link to comment Share on other sites More sharing options...
tkaiser Posted June 13, 2016 Share Posted June 13, 2016 I find interrupt is very very high, did anyone also notice that ? Out of curiousity: Is this with or without these IRQ distribution settings? Link to comment Share on other sites More sharing options...
zoic21 Posted June 14, 2016 Author Share Posted June 14, 2016 It's with this patch : vmstat 1 10 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 248012 135536 767836 0 0 0 0 156 124 2 2 96 0 0 2 0 0 247996 135536 767836 0 0 0 0 17899 1680 0 0 100 0 0 1 0 0 247996 135536 767836 0 0 0 0 19032 2256 4 3 93 0 0 2 0 0 247872 135536 767836 0 0 0 0 18447 1802 1 1 98 0 0 0 0 0 247872 135536 767836 0 0 0 0 18285 1682 0 2 98 0 0 2 0 0 247872 135536 767836 0 0 0 0 18222 1787 0 0 100 0 0 1 0 0 247888 135536 767836 0 0 0 0 18424 1727 0 2 98 0 0 0 0 0 247856 135536 767836 0 0 0 0 18214 1765 0 0 100 0 0 1 0 0 247872 135536 767836 0 0 0 0 19268 2347 7 2 92 0 0 4 0 0 247904 135536 767836 0 0 0 0 18458 2092 5 1 94 0 0 w : 08:43:18 up 16:58, 1 user, load average: 2.57, 2.90, 2.88 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT root pts/0 192.168.0.90 08:38 0.00s 0.88s 0.03s w cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 25: 0 0 0 0 GIC 25 vgic 27: 0 0 0 0 GIC 27 kvm guest timer 29: 0 0 0 0 GIC 29 arch_timer 30: 6112600 6112592 6112590 6112588 GIC 30 arch_timer 35: 3667454 0 0 0 GIC 35 osd_vsync, vsync 38: 6110623 0 0 0 GIC 38 timerC 40: 0 2886805 0 0 GIC 40 eth0 58: 0 0 0 0 GIC 58 meson_uart 62: 0 0 0 0 GIC 62 dwc_otg, dwc_otg_hcd:usb2, dwc_otg_pcd 63: 51309 0 0 1052167849 GIC 63 dwc_otg, dwc_otg_hcd:usb1 78: 0 0 0 0 GIC 78 deinterlace 89: 0 0 0 0 GIC 89 hdmitx 99: 1 0 0 0 GIC 99 sd_emmc_mmc_in 101: 0 0 0 0 GIC 101 sd_emmc_mmc_out 121: 3667453 0 0 0 GIC 121 rdma, osd_rdma 182: 0 0 0 0 GIC 182 ge2d 225: 0 0 0 0 GIC 225 meson_uart 228: 711 0 0 0 GIC 228 ir-meson 231: 0 0 0 0 GIC 231 hdmi_aocec 241: 61204 0 0 0 GIC 241 242: 303053 0 0 0 GIC 242 249: 0 0 0 0 GIC 249 sd_emmc 250: 2084 0 386891 0 GIC 250 sd_emmc IPI0: 4529837 4308917 5296590 3292367 Rescheduling interrupts IPI1: 7 12 13 15 Function call interrupts IPI2: 0 4 4 4 Single function call interrupts IPI3: 0 0 0 0 CPU stop interrupts IPI4: 0 0 0 0 Timer broadcast interrupts IPI5: 204820 314482 235567 202304 IRQ work interrupts Err: 0 Link to comment Share on other sites More sharing options...
tkaiser Posted June 14, 2016 Share Posted June 14, 2016 Thx for the answer. Well with an uptime of 17 minutes that's over one million USB IRQs per second? You might check the output of 'sudo armbianmonitor -u' for possible reasons (can't say that much whether that's normal or not since I don't have a C2) Link to comment Share on other sites More sharing options...
zador.blood.stained Posted June 14, 2016 Share Posted June 14, 2016 http://forum.odroid.com/viewtopic.php?f=139&t=18974 Link to comment Share on other sites More sharing options...
zoic21 Posted June 15, 2016 Author Share Posted June 15, 2016 Hi, I just make some more test, I install dietpi distribution with same software on it (but without data), load average : - 0 at 0.01 on dietpi - 0.24 on armbian Here vmstat on dietpi : procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 1496312 10760 90428 0 0 14 8 2151 169 1 1 98 0 0 0 0 0 1496188 10760 90428 0 0 0 0 8513 491 0 0 100 0 0 0 0 0 1496188 10760 90428 0 0 0 0 8487 473 0 0 100 0 0 0 0 0 1496188 10760 90428 0 0 0 0 8489 475 0 0 100 0 0 0 0 0 1496188 10760 90428 0 0 0 0 8488 473 0 0 100 0 0 0 0 0 1496188 10760 90428 0 0 0 0 8491 479 0 0 100 0 0 0 0 0 1496188 10760 90428 0 0 0 0 8515 479 0 0 100 0 0 0 0 0 1496188 10760 90428 0 0 0 0 8491 475 0 0 100 0 0 0 0 0 1496188 10760 90428 0 0 0 0 8503 474 0 0 100 0 0 0 0 0 1496188 10760 90428 0 0 0 0 8493 480 0 0 100 0 0 And /proc/interrupts : CPU0 CPU1 CPU2 CPU3 25: 0 0 0 0 GIC 25 vgic 35: 20098 0 0 0 GIC 35 osd_vsync, vsync 38: 40174 0 0 0 GIC 38 timerC 40: 155 371 0 0 GIC 40 eth0 58: 0 0 0 0 GIC 58 meson_uart 62: 0 0 0 0 GIC 62 dwc_otg, dwc_otg_hcd:usb2, dwc_otg_pcd 63: 748497 0 0 2460326 GIC 63 dwc_otg, dwc_otg_hcd:usb1 78: 0 0 0 0 GIC 78 deinterlace 89: 0 0 0 0 GIC 89 hdmitx 92: 79391 0 0 0 GIC 92 MESON TIMER-F 93: 0 13733 0 0 GIC 93 MESON TIMER-G 94: 0 0 14402 0 GIC 94 MESON TIMER-H 95: 0 0 0 7794 GIC 95 MESON TIMER-I 99: 1 0 0 0 GIC 99 sd_emmc_mmc_in 101: 0 0 0 0 GIC 101 sd_emmc_mmc_out 121: 20097 0 0 0 GIC 121 rdma, osd_rdma 182: 0 0 0 0 GIC 182 ge2d 192: 0 0 0 0 GIC 192 Mali_GP 193: 0 0 0 0 GIC 193 Mali_GP_MMU 194: 0 0 0 0 GIC 194 Mali_PP_Broadcast 196: 0 0 0 0 GIC 196 Mali_PP0 197: 0 0 0 0 GIC 197 Mali_PP0_MMU 198: 0 0 0 0 GIC 198 Mali_PP1 199: 0 0 0 0 GIC 199 Mali_PP1_MMU 200: 0 0 0 0 GIC 200 Mali_PP2 201: 0 0 0 0 GIC 201 Mali_PP2_MMU 225: 0 0 0 0 GIC 225 meson_uart 231: 3 0 0 0 GIC 231 hdmi_aocec 241: 407 0 0 0 GIC 241 242: 3 0 0 0 GIC 242 249: 0 0 0 0 GIC 249 sd_emmc 250: 3544 0 478 0 GIC 250 sd_emmc IPI0: 2613 3400 8795 3609 Rescheduling interrupts IPI1: 8 7 10 10 Function call interrupts IPI2: 1 2 5 1 Single function call interrupts IPI3: 0 0 0 0 CPU stop interrupts IPI4: 0 0 0 0 Timer broadcast interrupts IPI5: 180 102 253 175 IRQ work interrupts I force on dietpi the same interrupt affinity like armbian (after boot). Link to comment Share on other sites More sharing options...
Recommended Posts