SMZ2014 Posted May 21, 2020 Share Posted May 21, 2020 Hello, I'm trying to use Armbian with a Nanopi NEO Core (Allwinner H3) mounted on its Mini Shield. I was able to use the CAN controller MCP2518FD through SPI1 and CS1. Now I need to use, always on the same SPI1, the demo board TPM SLB 9670 TPM2.0 that I have already verified on a Raspberry Pi. I found the tpm_tis_spi Kernel module by compiling Armbian Bionic 5.4.37, but I was unable to locate the DTB overlay needed to set-up the following pins: SPI1 MOSI SPI1 MISO SPI1 CLK SPI1 CS IRQ (from SLB9670's demo board to Nanopi NEO Core) RESET (from Nanopi NEO Core to SLB9670's demo board) Can anyone help me? Thanks in advance Regards Link to comment Share on other sites More sharing options...
Recommended Posts