c.man Posted May 24, 2020 Share Posted May 24, 2020 Armbianmonitor: http://ix.io/2nf4 Hi, I have a orange pi zero with NAS expansion (128 MB msata drive) I would like to boot only msata.... So, How I to do ? Link to comment Share on other sites More sharing options...
Werner Posted May 24, 2020 Share Posted May 24, 2020 Try using armbian-config to install to USB/SATA.... Link to comment Share on other sites More sharing options...
c.man Posted May 24, 2020 Author Share Posted May 24, 2020 ok. After to use armbian-config I must to install armbian o.s. to msata with Balena Etcher o similar software .... but so I will delete all.... Or I must first install armbian o.s. to msata and after to use armbian-config....? Link to comment Share on other sites More sharing options...
Igor Posted May 24, 2020 Share Posted May 24, 2020 You can't boot mSATA directly. You need a boot loader on SD card or SPI flash. Link to comment Share on other sites More sharing options...
c.man Posted May 25, 2020 Author Share Posted May 25, 2020 Have you any guide or tutorial ? Link to comment Share on other sites More sharing options...
guidol Posted May 25, 2020 Share Posted May 25, 2020 32 minutes ago, c.man said: Have you any guide or tutorial ? for SPI-boot check these 2 threads in the forum (you need to adapt the "old" files : OrangePi Zero SPI / mtd0: But I dont know if the msata on the NAS-expansion is connected via USB, because I only got the NAS-Expansion at my Orange Pi R1, but no msata-drive [EDIT] seems to be connected via USB:https://www.cnx-software.com/2017/01/19/orange-pi-zero-nas-expansion-board-with-sata-usb-and-av-port-sells-for-10-shipped/ Quote Storage – 1x SATA port, 1x mSATA port both through a JMS578 USB 3.1 to SATA bridge with UAS support each, which should be better than some other USB to SATA solution despite only being connected to a USB 2.0 interface. Link to comment Share on other sites More sharing options...
Recommended Posts