Jump to content

armbian in orange pi zero plus dont start


c.man

Recommended Posts

Hi,

I tried many time with different version of armbian o.s. for orange pi zero plus, but operative system dont want to start....

Work only old version DietPi ...

With armbian o.s. , at start, I see orange e green ethernet led ON fixed and nothing other....

Why ?

 

Link to comment
Share on other sites

1. Provide quality information for us to work with.

2. Use the forum search to find a solution. Make sure you've read the Armbian documentation. 

3. Include Logs: armbianmonitor -u (paste URL in your forum post) 

4. If your board does not boot, provide a log from serial console or take a screenshot

Link to comment
Share on other sites

1 hour ago, Igor said:

- which image exactly: Armbian_20.02.1_Orangepizeroplus_stretch_current_5.4.20, Armbian_20.02.1_Orangepizeroplus_buster_current_5.4.20, Armbian_20.02.1_Orangepizeroplus_bionic_current_5.4.20

- are you sure you are using correct image for this board? yes....Orange Zero Pi Plus

- do you have a serial console? I Have a USB/TTL... I dont tried

- dietpi is a script that only rebrands armbian.

- kernel version is essential to say anything.  5.40.20

 

Board runs fine for us: (No. 21)
https://dl.armbian.com/_test-reports/2020-05-21_22.45.09.html

 

Link to comment
Share on other sites

3 hours ago, c.man said:

- which image exactly:  Armbian_20.02.1_Orangepizeroplus_buster_current_5.4.20

I downloaded
https://dl.armbian.com/orangepizeroplus/archive/Armbian_20.02.1_Orangepizeroplus_buster_current_5.4.20.7z
unzipped it with 7Zip and flashed the .img with Ether to the card and it does boot and work on my
OPi Zero Plus (H5):
System diagnosis information has been uploaded to http://ix.io/2nVF

 

login as: root
root@192.168.6.98's password:
  ___  ____  _   _____                ____  _
 / _ \|  _ \(_) |__  /___ _ __ ___   |  _ \| |_   _ ___
| | | | |_) | |   / // _ \ '__/ _ \  | |_) | | | | / __|
| |_| |  __/| |  / /|  __/ | | (_) | |  __/| | |_| \__ \
 \___/|_|   |_| /____\___|_|  \___/  |_|   |_|\__,_|___/

Welcome to Armbian buster with Linux 5.4.20-sunxi64

package bsp-kernel[20.02.1] u-boot[20.02.1] dtb   [20.02.1]
firmware          [20.02.1] config[20.02.1] branch[current]

System load:   0.19 0.06 0.02   Up time:       1 min
Memory usage:  18 % of 479MB    IP:            192.168.6.98
CPU temp:      59°C
Usage of /:    17% of 7.2G

Last login: Sun May 31 16:29:52 2020 from 192.168.6.17

 

Link to comment
Share on other sites

8 hours ago, guidol said:

I downloaded
https://dl.armbian.com/orangepizeroplus/archive/Armbian_20.02.1_Orangepizeroplus_buster_current_5.4.20.7z
unzipped it with 7Zip and flashed the .img with Ether to the card and it does boot and work on my
OPi Zero Plus (H5):
System diagnosis information has been uploaded to http://ix.io/2nVF

 

 

ok. could it be SD Card ? I use a kingstone Industrial like this class 10.

Or could it be a power problem ? I usa a mobile charger with 5V 2 A

 

Link to comment
Share on other sites

6 hours ago, c.man said:

could it be SD Card ?

Images shall only be written with imaging tools that validate burning results.  This saves you from corrupted SD card contents.

 

Approved Tools:

  • USBImager a lightweight cross-platform imaging tool
  • Balena Etcher an electron / node.js based cross-platform imaging tool (may contain spyware)
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines