Jump to content

fbtft problems on OrangePi One


exiad

Recommended Posts

Hi everyone,

 

I'm trying to connect Tiny LCD to OrangePiOne.

I bought this cheap LCD display with touch panel.

http://www.aliexpress.com/snapshot/7757492669.html?orderId=75894630877559

 

--My environment--------------------------------------------------------------------------------------------------

Orange Pi One

Armbian Jessie Desktop with legacy kernel

DS1302 RTC module(work with WiringOP)

720p DVI Display

2.8" SPI Serial Port 240x320 ILI9341 TFT LCD Display Screen Touch Panel Backlight Module

------------------------------------------------------------------------------------------------------------------------

 

I connected and tried to configure the LCD module with this guidance. http://www.armbian.com/banana-pi/

 

But when I run this code,

sudo modprobe fbtft_device name=adafruit28

I received the error message, "modprobe: ERROR: could not insert 'fbtft_device': Invalid argument" or "modprobe: ERROR: could not insert 'fbtft_device': Unknown symbol in module, or unknown parameter (see dmesg)"

 

I heard Armbian includes "fbtft" and "SPI is ready", but my environment seems the kernel does not load fbtft.

 

Could anyone give me advice??

 

Thank you.

Link to comment
Share on other sites

The pinout on this board is different to the ones already tested. They cheap enough to consider getting

 

Go check out the guide of the ones already configured and confirmed working ( 2 versions) not touch yet as far a i know

http://www.grabber.xyz/2016/04/orange-pi-pc-tiny-lcd-tutorial.O4WYqdBez5_.html

 

where buy:
http://www.aliexpress.com/item/2-4-inch-TFT-touch-LCD-Screen-Module-For-Arduino-UNO-R3-Free-Shipping/1814799101.html
Files:
https://mega.nz/#!VYlQSYzY!WUYI6lDxYMwoTKblV7jDxJQSdPu5XlVQv4ctnSzkfig
Support:
https://www.facebook.com/groups/1483270805309190/

 

 

Hi everyone,

 

I'm trying to connect Tiny LCD to OrangePiOne.

I bought this cheap LCD display with touch panel.

http://www.aliexpress.com/snapshot/7757492669.html?orderId=75894630877559

 

--My environment--------------------------------------------------------------------------------------------------

Orange Pi One

Armbian Jessie Desktop with legacy kernel

DS1302 RTC module(work with WiringOP)

720p DVI Display

2.8" SPI Serial Port 240x320 ILI9341 TFT LCD Display Screen Touch Panel Backlight Module

------------------------------------------------------------------------------------------------------------------------

 

I connected and tried to configure the LCD module with this guidance. http://www.armbian.com/banana-pi/

 

But when I run this code,

sudo modprobe fbtft_device name=adafruit28

I received the error message, "modprobe: ERROR: could not insert 'fbtft_device': Invalid argument" or "modprobe: ERROR: could not insert 'fbtft_device': Unknown symbol in module, or unknown parameter (see dmesg)"

 

I heard Armbian includes "fbtft" and "SPI is ready", but my environment seems the kernel does not load fbtft.

 

Could anyone give me advice??

 

Thank you.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines