sbay Posted June 20, 2020 Share Posted June 20, 2020 Hello Community, I'm trying to get Armbian running on my Banana PI M1 with the following image: https://dl.armbian.com/bananapi/archive/Armbian_20.05.2_Bananapi_buster_current_5.4.43_minimal.img.xz I flashed the image with Etcher on my SD Card which is a Sandisk Ultra 16GB SDHC Card. After flashing I have inserted the Card into my Banana PI but I only get a red light, I already tried different images like the bionic image but without positive result and tried different power supply cables. In my DHCP Server I see no request. I have also flashed for testing reasons current image of Bananian which was directly working but I don't want to use that because their project is not under active development anymore and they recommend to use Armbian. I would appreciate any ideas. 0 Quote Link to comment Share on other sites More sharing options...
Igor Posted June 20, 2020 Share Posted June 20, 2020 24 minutes ago, sbay said: I would appreciate any ideas. Start here:https://docs.armbian.com/User-Guide_Getting-Started/ and here:https://forum.armbian.com/forum/31-sd-card-and-psu-issues/ 0 Quote Link to comment Share on other sites More sharing options...
guidol Posted June 20, 2020 Share Posted June 20, 2020 2 hours ago, sbay said: I'm trying to get Armbian running on my Banana PI M1 with the following image: https://dl.armbian.com/bananapi/archive/Armbian_20.05.2_Bananapi_buster_current_5.4.43_minimal.img.xz I did download the image, flashed it to a 8GB(SLC) Toshiba SD-HC Card and boot. DHCP is OK: Quote login as: root root@192.168.6.150's password: ____ ____ _ | __ )| _ \(_) | _ \| |_) | | | |_) | __/| | |____/|_| |_| Welcome to Armbian buster with Linux 5.4.43-sunxi package bsp-kernel[20.05.2] u-boot[20.05.2] dtb [20.05.2] firmware [20.05.2] branch[current] root@bananapi:~# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.6.150 netmask 255.255.255.0 broadcast 192.168.6.255 inet6 fe80::bf89:abed:4c0d:f8b6 prefixlen 64 scopeid 0x20<link> ether 02:0b:02:01:d6:a4 txqueuelen 1000 (Ethernet) RX packets 1181 bytes 85702 (83.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 337 bytes 51150 (49.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 61 System diagnosis information has been uploaded to http://ix.io/2pFz @Igor Iam missing the last times the possibility to insert a code-fragment in the forum editor Is that due to answer on questions from new members? because it isnt helpful to give a answer when it cant be formatted in mono-font when copying something from the console 1 Quote Link to comment Share on other sites More sharing options...
hexdump Posted June 20, 2020 Share Posted June 20, 2020 it is sometimes not shown if you have a too small screen - for instance i have this on my thinkpad x61s with its 1024x768 screen - which is my everyday machine ... what helped was to zoom out in firefox (something like 80%) for posting in that case ... 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.