Jump to content

BananaPI M1 not booting with 20.05.2


sbay

Recommended Posts

Hello Community,

I'm trying to get Armbian running on my Banana PI M1 with the following image:

https://dl.armbian.com/bananapi/archive/Armbian_20.05.2_Bananapi_buster_current_5.4.43_minimal.img.xz

 

I flashed the image with Etcher on my SD Card which is a Sandisk Ultra 16GB SDHC Card.
After flashing I have inserted the Card into my Banana PI but I only get a red light, I already tried different images like the bionic image but without positive result and tried

different power supply cables. In my DHCP Server I see no request.

I have also flashed for testing reasons current image of Bananian which was directly working but I don't want to use that because
their project is not under active development anymore and they recommend to use Armbian.

I would appreciate any ideas.

Link to comment
Share on other sites

2 hours ago, sbay said:

I'm trying to get Armbian running on my Banana PI M1 with the following image:

https://dl.armbian.com/bananapi/archive/Armbian_20.05.2_Bananapi_buster_current_5.4.43_minimal.img.xz

I did download the image, flashed it to a 8GB(SLC) Toshiba SD-HC Card and boot.
DHCP is OK:
 

Quote

login as: root
root@192.168.6.150's password:
 ____  ____  _
| __ )|  _ \(_)
|  _ \| |_) | |
| |_) |  __/| |
|____/|_|   |_|

Welcome to Armbian buster with Linux 5.4.43-sunxi

package bsp-kernel[20.05.2] u-boot[20.05.2] dtb   [20.05.2]
firmware          [20.05.2]  branch[current]

 

 

root@bananapi:~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.6.150  netmask 255.255.255.0  broadcast 192.168.6.255
        inet6 fe80::bf89:abed:4c0d:f8b6  prefixlen 64  scopeid 0x20<link>
        ether 02:0b:02:01:d6:a4  txqueuelen 1000  (Ethernet)
        RX packets 1181  bytes 85702 (83.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 337  bytes 51150 (49.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 61

 

 

System diagnosis information has been uploaded to http://ix.io/2pFz 

 

@Igor Iam missing the last times the possibility to insert a code-fragment in the forum editor :(
Is that due to answer on questions from new members? because it isnt helpful to give a answer when it cant be formatted in mono-font when copying something from the console :( 

 

Link to comment
Share on other sites

it is sometimes not shown if you have a too small screen - for instance i have this on my thinkpad x61s with its 1024x768 screen - which is my everyday machine :) ... what helped was to zoom out in firefox (something like 80%) for posting in that case ...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines