BananaPI M1 not booting with 20.05.2

[sbay]

Hello Community,

I'm trying to get Armbian running on my Banana PI M1 with the following image:

https://dl.armbian.com/bananapi/archive/Armbian_20.05.2_Bananapi_buster_current_5.4.43_minimal.img.xz

 

I flashed the image with Etcher on my SD Card which is a Sandisk Ultra 16GB SDHC Card.
After flashing I have inserted the Card into my Banana PI but I only get a red light, I already tried different images like the bionic image but without positive result and tried

different power supply cables. In my DHCP Server I see no request.

I have also flashed for testing reasons current image of Bananian which was directly working but I don't want to use that because
their project is not under active development anymore and they recommend to use Armbian.

I would appreciate any ideas.

[Igor]

24 minutes ago, sbay said:

I would appreciate any ideas.

Start here:
https://docs.armbian.com/User-Guide_Getting-Started/

and here:
https://forum.armbian.com/forum/31-sd-card-and-psu-issues/

[guidol]

2 hours ago, sbay said:

I'm trying to get Armbian running on my Banana PI M1 with the following image:

https://dl.armbian.com/bananapi/archive/Armbian_20.05.2_Bananapi_buster_current_5.4.43_minimal.img.xz

I did download the image, flashed it to a 8GB(SLC) Toshiba SD-HC Card and boot.
DHCP is OK:
 

Quote

login as: root
root@192.168.6.150's password:
 ____  ____  _
| __ )|  _ \(_)
|  _ \| |_) | |
| |_) |  __/| |
|____/|_|   |_|

Welcome to Armbian buster with Linux 5.4.43-sunxi

package bsp-kernel[20.05.2] u-boot[20.05.2] dtb   [20.05.2]
firmware          [20.05.2]  branch[current]

 

 

root@bananapi:~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.6.150  netmask 255.255.255.0  broadcast 192.168.6.255
        inet6 fe80::bf89:abed:4c0d:f8b6  prefixlen 64  scopeid 0x20<link>
        ether 02:0b:02:01:d6:a4  txqueuelen 1000  (Ethernet)
        RX packets 1181  bytes 85702 (83.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 337  bytes 51150 (49.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 61

 

 

System diagnosis information has been uploaded to http://ix.io/2pFz 

 

@Igor Iam missing the last times the possibility to insert a code-fragment in the forum editor
Is that due to answer on questions from new members? because it isnt helpful to give a answer when it cant be formatted in mono-font when copying something from the console  

 

[hexdump]

it is sometimes not shown if you have a too small screen - for instance i have this on my thinkpad x61s with its 1024x768 screen - which is my everyday machine ... what helped was to zoom out in firefox (something like 80%) for posting in that case ...