Jump to content

PiHole and Unbound isssue on Odroid HC1


aian

Recommended Posts

Hi all,

I have a Rpi 3B+ where I am running Pihole with Unbound. As a secondary DNS, I am planning to use an Odroid HC1 which will also be running other stuff.

Today I installed Armbian_20.05.7_Odroidxu4_buster_current_5.4.50_minimal.img and started the installation of Pihole, which went through just fine.

Then I attempted to install Unbound, but got an error message. The command I run was:

sudo apt install unbound -y

And this is what was returned:

Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  libevent-2.1-6 libpython3.7 libunbound8 unbound-anchor
Suggested packages:
  apparmor
The following NEW packages will be installed:
  libevent-2.1-6 libpython3.7 libunbound8 unbound unbound-anchor
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 2,682 kB of archives.
After this operation, 7,786 kB of additional disk space will be used.
Get:1 http://security.debian.org buster/updates/main armhf libunbound8 armhf 1.9.0-2+deb10u2 [411 kB]
Get:2 http://deb.debian.org/debian buster/main armhf libevent-2.1-6 armhf 2.1.8-stable-4 [159 kB]
Get:3 http://deb.debian.org/debian buster/main armhf libpython3.7 armhf 3.7.3-2+deb10u1 [1,282 kB]
Get:4 http://security.debian.org buster/updates/main armhf unbound-anchor armhf 1.9.0-2+deb10u2 [145 kB]
Get:5 http://security.debian.org buster/updates/main armhf unbound armhf 1.9.0-2+deb10u2 [686 kB]
Fetched 2,682 kB in 1s (4,479 kB/s)
Selecting previously unselected package libevent-2.1-6:armhf.
(Reading database ... 27770 files and directories currently installed.)
Preparing to unpack .../libevent-2.1-6_2.1.8-stable-4_armhf.deb ...
Unpacking libevent-2.1-6:armhf (2.1.8-stable-4) ...
Selecting previously unselected package libpython3.7:armhf.
Preparing to unpack .../libpython3.7_3.7.3-2+deb10u1_armhf.deb ...
Unpacking libpython3.7:armhf (3.7.3-2+deb10u1) ...
Selecting previously unselected package libunbound8:armhf.
Preparing to unpack .../libunbound8_1.9.0-2+deb10u2_armhf.deb ...
Unpacking libunbound8:armhf (1.9.0-2+deb10u2) ...
Selecting previously unselected package unbound-anchor.
Preparing to unpack .../unbound-anchor_1.9.0-2+deb10u2_armhf.deb ...
Unpacking unbound-anchor (1.9.0-2+deb10u2) ...
Selecting previously unselected package unbound.
Preparing to unpack .../unbound_1.9.0-2+deb10u2_armhf.deb ...
Unpacking unbound (1.9.0-2+deb10u2) ...
Setting up libpython3.7:armhf (3.7.3-2+deb10u1) ...
Setting up libevent-2.1-6:armhf (2.1.8-stable-4) ...
Setting up libunbound8:armhf (1.9.0-2+deb10u2) ...
Setting up unbound-anchor (1.9.0-2+deb10u2) ...
Setting up unbound (1.9.0-2+deb10u2) ...
Created symlink /etc/systemd/system/multi-user.target.wants/unbound.service → /lib/systemd/system/unbound.service.
Created symlink /etc/systemd/system/unbound.service.wants/unbound-resolvconf.service → /lib/systemd/system/unbound-resolvconf.service.
Job for unbound.service failed because the control process exited with error code.
See "systemctl status unbound.service" and "journalctl -xe" for details.
Job for unbound.service failed because the control process exited with error code.
See "systemctl status unbound.service" and "journalctl -xe" for details.
invoke-rc.d: initscript unbound, action "start" failed.
● unbound.service - Unbound DNS server
   Loaded: loaded (/lib/systemd/system/unbound.service; enabled; vendor preset: enabled)
   Active: activating (auto-restart) (Result: exit-code) since Sat 2020-07-18 17:29:48 BST; 24ms ago
     Docs: man:unbound(8)
  Process: 2692 ExecStartPre=/usr/lib/unbound/package-helper chroot_setup (code=exited, status=0/SUCCESS)
  Process: 2697 ExecStartPre=/usr/lib/unbound/package-helper root_trust_anchor_update (code=exited, status=0/SUCCESS)
  Process: 2701 ExecStart=/usr/sbin/unbound -d $DAEMON_OPTS (code=exited, status=1/FAILURE)
 Main PID: 2701 (code=exited, status=1/FAILURE)
Processing triggers for systemd (241-7~deb10u4) ...
Processing triggers for libc-bin (2.28-10) ...

4th line from the bottom, the error (code=exited, status=1/FAILURE) appeared.

 

Any idea what I did wrong and how to solve this?

Thanks in advance.

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines