UART4 on Cubieboard2 via Overlay not working


Hatzl
 Share

1 1

Recommended Posts

Armbianmonitor:

Hi all,

 

i am trying to enable UART4 on my Cubieboard2 via /boot/armbianEnv.txt:

 

overlay_prefix=sun7i-a20
overlays=i2c1 uart4
param_uart4_pins=a

 

but if it seems that my uart4 is not working.

 

If i look at dmesg | grep tty there is no ttyS4-device - only ttyS0:

 

[    0.000000] Kernel command line: console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1
[    0.000860] console [tty1] enabled
[    1.542600] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 47, base_baud = 1500000) is a U6_16550A

 

am i doing something wrong or did i forget something?

 

Thanks for your help!

 

Michael

Link to post
Share on other sites

Armbian is a community driven open source project. Do you like to contribute your code?

Hi Gediz,

 

thanks for your answer.

Regarding R_UART i didnt find anything which did help me with UART4.

 

The problem not only exists with UART4 - but with all possible UARTs.

 

If i activate UART2, UART3 for example there is also no entry found in dmesg for ttyS2 or ttyS3.

in dmesg always there is this entry for ttyS0... :-/

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

1 1