Guest Posted July 26, 2020 Share Posted July 26, 2020 Hi everybody, I have a problem with this version: Armbian_20.05.2_Rockpro64_buster_legacy_4.4.213.img I don't see my disk that is plugged on the PCIe To SATA Marvell 88SE9230 in the system. I've create the file /etc/udev/rules.d/99-marvell.rules with the following line on it: ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x1b4b", ATTR{device}=="0x9230", RUN+="/bin/bash -c 'echo %k > /sys/bus/pci/drivers/ahci/bind'" If I do the same thing with this version: Armbian_20.05.4_Rockpro64_focal_current_5.4.46.img, I see my disk after creating the file. But, there's two problem with this version: first the fan always running and, more important, second I can't install OpenMediaVault on it. My question is, do I have to do something on the kernel? If so, could someone tell me what I have to activate to see my disk ? I don't have a lot of knowledge about kernels but I'm ready to jump it if someone could tell me where to check. Thank you all in advance. 0 Quote Link to comment Share on other sites More sharing options...
soerenderfor Posted August 2, 2020 Share Posted August 2, 2020 Hi, Myself has a bunch of Marvell chipset sata cards. And almost sure all of them work on kernel 5.7.12 - Try it out and let me know. I did notice months back probs in OMV with that type of cards. I run kernel 5.7.12 with simpnas and works like charm. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.