Roland G Posted July 28, 2020 Share Posted July 28, 2020 Armbianmonitor: http://ix.io/2su5 Wifi AP access point broken in Linux tinkerboard 5.4.44-rockchip #20.05.2 SMP PREEMPT Wed Jun 3 10:43:15 CEST 2020 armv7l armv7l armv7l GNU/Linux [ 456.873025] ------------[ cut here ]------------ [ 456.878198] kernel BUG at mm/slub.c:3968! [ 456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 456.889200] Modules linked in: xt_MASQUERADE xt_conntrack ipt_REJECT iptable_filter nf_nat_h323 nf_conntrack_h323 nf_nat_pptp nf_conntrack_pptp nf_nat_tftp nf_conntrack_tftp nf_nat_sip nf_conntrack_sip nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 fuse zstd snd_soc_hdmi_codec zram snd_soc_simple_card snd_soc_simple_card_utils gpio_keys panfrost dw_hdmi_i2s_audio gpu_sched snd_usb_audio snd_soc_rockchip_i2s snd_soc_rockchip_pcm snd_hwdep snd_usbmidi_lib rockchip_rga snd_rawmidi snd_soc_core snd_seq_device snd_pcm_dmaengine videobuf2_dma_sg v4l2_mem2mem snd_pcm videobuf2_memops videobuf2_v4l2 snd_timer rk_crypto snd videobuf2_common soundcore syscon_reboot_mode dw_wdt reboot_mode rk3288_gpiomem r8723bs(C) rockchip_thermal cpufreq_dt sch_fq_codel ip_tables hid_logitech_hidpp hid_logitech_dj realtek [ 456.975109] CPU: 1 PID: 1564 Comm: RTW_CMD_THREAD Tainted: G C 5.4.44-rockchip #20.05.2 [ 456.985512] Hardware name: Rockchip (Device Tree) [ 456.990779] PC is at kfree+0x2dc/0x308 [ 456.994974] LR is at nl80211_send_station+0x954/0xfc4 [ 457.000621] pc : [<c02b81c0>] lr : [<c0e2a470>] psr: 400b0013 [ 457.007625] sp : e8edfd28 ip : e8edfd58 fp : e8edfd54 [ 457.013464] r10: c1606788 r9 : eccca0c0 r8 : e8edfec0 [ 457.019304] r7 : e8edfec0 r6 : c0e2a470 r5 : ef3bb75c r4 : 00000000 [ 457.026601] r3 : 00000100 r2 : 00000024 r1 : ea678d61 r0 : e8edfec0 [ 457.033901] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 457.041878] Control: 10c5387d Table: 2965806a DAC: 00000051 [ 457.048303] Process RTW_CMD_THREAD (pid: 1564, stack limit = 0x081ec079) [ 457.055796] Stack: (0xe8edfd28 to 0xe8ee0000) [ 457.060669] fd20: ea678cdc c07996bc e8edfe00 e80a9480 00000011 00000000 [ 457.069818] fd40: e8edfec0 eccca0c0 e8edfdb4 e8edfd58 c0e2a470 c02b7ef0 00000005 00000013 [ 457.078967] fd60: c0276534 00000000 c1606788 eccca030 eccca0c0 eccca014 00000000 00000000 [ 457.088115] fd80: 0086c550 e9c85a1a 000101dc ec46d9e0 ec46d000 00000000 00000a20 ea678cca [ 457.097263] fda0: e8edfe00 e80a9480 e8edfdfc e8edfdb8 c0e2b18c c0e29b28 00000000 ec46d800 [ 457.106411] fdc0: ec46d000 ea678cca e8edfe00 00000001 e8edfdec c1606788 0000001c 00000000 [ 457.115560] fde0: 00000000 bf091050 e85b9d80 00009930 e8edfeec e8edfe00 bf086684 c0e2b108 [ 457.124708] fe00: 00000000 00000000 000fffff c02b72e4 c010d6a0 c1606788 e9c85a1a c02b73bc [ 457.133856] fe20: 0000000a 00000000 e8edfebc e8edfe38 c02b73bc c0151ec8 bf069230 bf068f24 [ 457.143004] fe40: e816fc00 c1606788 c010d6a0 00210d00 8015000a 00000001 00000001 e816fc00 [ 457.152153] fe60: ffffe000 600b0013 e8edfeac e8edfe78 ea678cdc 00000085 e8edfec4 8015000a [ 457.161301] fe80: c02b5990 c0277ffc e8edfef0 e9c85a1a 000000a1 ee401c00 ef39d39c bf03df0c [ 457.170450] fea0: e816fc00 c012bf24 ffffe000 000000a1 e8edfed4 e8edfec0 c012bf24 c0151ec8 [ 457.179598] fec0: bf03df20 f1225f84 e8edfeec e9c85a1a f086b000 f1225f84 000000a1 ea678cc0 [ 457.188746] fee0: e8edff0c e8edfef0 bf03df38 bf086610 f086c000 00000000 f086c4b8 c1604900 [ 457.197894] ff00: e8edff24 e8edff10 bf048e4c bf03dd7c f086c000 f086e000 e8edff74 e8edff28 [ 457.207042] ff20: bf03693c bf048dcc e8edff4c e8edff38 f086c49c f086b000 bf099000 ec46f200 [ 457.216190] ff40: e8ede000 f086c480 c014902c e8369900 e9975200 00000000 e8ede000 f086b000 [ 457.225339] ff60: bf0367a4 ed7a57e8 e8edffac e8edff78 c014a214 bf0367b0 e8369928 e8369928 [ 457.234486] ff80: 00000000 e9975200 c014a0a4 00000000 00000000 00000000 00000000 00000000 [ 457.243626] ffa0: 00000000 e8edffb0 c01010e8 c014a0b0 00000000 00000000 00000000 00000000 [ 457.252752] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 457.261879] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 457.271004] Backtrace: [ 457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4) [ 457.282481] r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00 [ 457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc) [ 457.300850] r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000 [ 457.309586] r4:ec46d9e0 [ 457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs]) [ 457.324095] r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c [ 457.332831] r4:c1606788 [ 457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs]) [ 457.349489] r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000 [ 457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs]) [ 457.367601] r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000 [ 457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs]) [ 457.384744] r5:f086e000 r4:f086c000 [ 457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174) [ 457.398083] r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200 [ 457.406828] r4:e8369900 [ 457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8) [ 457.423356] ffa0: 00000000 00000000 00000000 00000000 [ 457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 457.449006] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4 [ 457.457750] r4:e9975200 [ 457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2) [ 457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]--- 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted July 29, 2020 Share Posted July 29, 2020 Hi, please use the spoiler tool to hide longer pastes to increase readability How did you setup the AP? Did you use armbian-config for that? 0 Quote Link to comment Share on other sites More sharing options...
Myy Posted July 31, 2020 Share Posted July 31, 2020 It seems to be the same issue as : I'll try to investigate this, see if the patch provided there works nicely. Also, does this problem happens every time you run in AP mode ? 0 Quote Link to comment Share on other sites More sharing options...
Ravaz Posted August 11, 2020 Share Posted August 11, 2020 Seems related to this: https://forum.armbian.com/topic/12542-rtl8723bs-in-ap-mode-gets-kernel-errors/?tab=comments#comment-92905 Did you manage to find a fix for this issue? 0 Quote Link to comment Share on other sites More sharing options...
Myy Posted August 13, 2020 Share Posted August 13, 2020 I'm trying to understand the issue, but it seems rather bizarre. Basically, when freeing the station_info structure in nl80211_send_station, kfree is called with a somewhat valid pointer, but then kfree (SLUB version) trips when calling PageCompound on the page of the provided pointer. My best bet is that the structure isn't initialized correctly, leading some fields to be initialized with garbage values. However, it seems strange that everything goes without any bug until that specific point. 1 Quote Link to comment Share on other sites More sharing options...
Myy Posted August 13, 2020 Share Posted August 13, 2020 Ok, that clearly seems to be a badly initialized structure issue. Changing struct station_info sinfo; by struct station_info sinfo = {0}; in drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c : rtw_cfg80211_indicate_sta_assoc remove the BUG calls on a client connection. Now, I'll have to test it in a real environment, to check if the Wifi connection works and is stable. I'll post a clean patch tomorrow. 1 Quote Link to comment Share on other sites More sharing options...
Myy Posted August 14, 2020 Share Posted August 14, 2020 Here's the patch : https://gist.githubusercontent.com/Miouyouyou/31d7d4ff0a2d5b8941d746ee6248f8b1/raw/a9ea4692642f1c59bfa6d562b9d35e25e5ce7123/drivers-staging-rtl8723bs-Initialize-structures-corr.patch While the kernel drivers doesn't generate any BUG now, the connection still fails in one way or another, since hostapd appears to be unable to setup wlan0 correctly. Or maybe it's just my hostapd.conf that's badly setup... Give it a try and tell me how it goes. From 48646460655b36cb616c7ad05f66f63631bfe1d8 Mon Sep 17 00:00:00 2001 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr> Date: Fri, 14 Aug 2020 09:27:49 +0200 Subject: [PATCH] drivers: staging: rtl8723bs: Initialize structures correctly This avoids a BUG when freeing the ressources in nl80211_send_station . Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr> --- drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c index 2fb80b6eb..aef9cd888 100644 --- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c +++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c @@ -2384,7 +2384,7 @@ void rtw_cfg80211_indicate_sta_assoc(struct adapter *padapter, u8 *pmgmt_frame, DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter)); { - struct station_info sinfo; + struct station_info sinfo = {0}; u8 ie_offset; if (GetFrameSubType(pmgmt_frame) == WIFI_ASSOCREQ) ie_offset = _ASOCREQ_IE_OFFSET_; -- 2.28.0 0 Quote Link to comment Share on other sites More sharing options...
Ravaz Posted September 21, 2020 Share Posted September 21, 2020 Hello, have you got any new finding on this topic? 0 Quote Link to comment Share on other sites More sharing options...
Roland G Posted October 25, 2020 Author Share Posted October 25, 2020 Hi Myy, I have applied your solution to the current kernel (5.8.16) and it worked perfectly. The AP came up and I connected 2 clients to it without a problem. This is the first time the AP worked since 4.4.y. Well done. The only thing that was missing for the AP to work (after applying your fix) was to install dnsmasq (so that the clients could be assigned an IP). 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.