Jump to content

Which install-emmc file should be choosed?


fayehoo

Recommended Posts

There are two install emmc files in armbian amlogic verison by balbes150.  install-aml.sh and install-aml-s905-emmc.sh.

What's the difference between these? If install armbian to a S912 TVbox emmc, which one should be choosed?

Link to comment
Share on other sites

Can you please post the content of both the files?

I am not sure so it will be better to read the content and understand what it is trying to do,

 

AFAIK I have been using the latest iteration of the install script which includes support for RGB YUV for aml devices which have green screen issue.

 

 

Link to comment
Share on other sites

diff -u  install-aml.sh install-aml-s905-emmc.sh | colordiff
--- install-aml.sh      2020-07-23 10:47:15.088753970 +0000
+++ install-aml-s905-emmc.sh    2020-07-23 10:47:15.096757969 +0000
@@ -47,19 +47,12 @@
 echo $DEV_EMMC

 echo "Start backup u-boot default"
+dd if="${DEV_EMMC}" of=/root/u-boot-default-aml-s905.img bs=1M count=4

-dd if="${DEV_EMMC}" of=/root/u-boot-default-aml.img bs=1M count=4
-
-echo "Start create MBR and partittion"
-
-parted -s "${DEV_EMMC}" mklabel msdos
-parted -s "${DEV_EMMC}" mkpart primary fat32 700M 1212M
-parted -s "${DEV_EMMC}" mkpart primary ext4 1213M 100%
-
-echo "Start restore u-boot"
-
-dd if=/root/u-boot-default-aml.img of="${DEV_EMMC}" conv=fsync bs=1 count=442
-dd if=/root/u-boot-default-aml.img of="${DEV_EMMC}" conv=fsync bs=512 skip=1 seek=1
+if [ -f /root/u-boot/u-boot-s905/u-boot.img ] ; then
+    echo "Start install u-boot to eMMC"
+    dd if=/root/u-boot/u-boot-s905/u-boot.img of="${DEV_EMMC}"
+fi

 sync

@@ -98,16 +91,10 @@
  -i "$DIR_INSTALL/uEnv.txt"
 echo "done."

-rm $DIR_INSTALL/s9*
+#rm $DIR_INSTALL/s9*
 rm $DIR_INSTALL/aml*
 rm $DIR_INSTALL/boot.ini
-mv -f $DIR_INSTALL/boot-emmc.scr $DIR_INSTALL/boot.scr
-
-if [ -f /boot/u-boot.ext ] ; then
-    mv -f $DIR_INSTALL/u-boot.sd $DIR_INSTALL/u-boot.emmc
-    mv -f $DIR_INSTALL/boot-emmc.ini $DIR_INSTALL/boot.ini
-    sync
-fi
+#mv -f $DIR_INSTALL/s905_emmc_autoscript $DIR_INSTALL/s905_autoscript

 umount $DIR_INSTALL

Link to comment
Share on other sites

  • Werner locked this topic
Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines