BananaPi P2-Zero M2-Zero eMMC not detected

[Adrian Shajkofci]

Armbianmonitor:

https://pastebin.pl/view/ba06da6f

Hi,

 

I compiled from scratch an armbian image and kernel, and in these ones the eMMC /dev/mmcblk1 is not present. If I try the (outdated 4.14) official images, the eMMC is present.

Any ideas ?

 

Thanks

https://pastebin.pl/view/ba06da6f

Edited September 3, 2020 by Adrian Shajkofci

[Werner]

Move to p2p support since this is not an officially supported board.

 

You can try to isolate the issue by trying other builds like legacy (5.4), current (which is 5.8 at the moment so your current build is outdated) or even dev (5.9.0-rc2).

 

[Tido]

9 hours ago, Adrian Shajkofci said:

armbian image and kernel

I don't know if you have already been there, but you might get some ideas: https://forum.armbian.com/topic/5268-armbian-on-sunvell-r69-allwinner-h2/

 

[Paul Chen]

I'm assuming you used the m2 zero config?

Haven't tried this yet but have you tried adding these configs to the uboot config? 

 

http://linux-sunxi.org/Sinovoip_Banana_Pi_P2_Zero